QABPEM: Quality-Aware Business Process Engineering Method

2017 ◽  
Vol 26 (01) ◽  
pp. 1650011
Author(s):  
Majid Aboutalebi ◽  
Saeed Parsa
Keyword(s):  
Business Process ◽  
Process Modeling ◽  
Power Distribution ◽  
Process Model ◽  
Business Process Modeling ◽  
Process Engineering ◽  
Process Models ◽  
Engineering Method ◽  
Business Process Model ◽  
Goal Model

In this paper, a novel business process engineering method based on quality assessment is proposed. In the proposed method, a goal model is used to estimate the operational costs of business processes. Goals scenarios in the goal model of desired information systems are applied as a basis for estimating the design cost. Qualities of business requirements models and business process models are also estimated. Based on the quality metrics, the process of business process modeling is examined. Then, using XOR operator in the goal model, a simple and direct mapping of the goal model to the business process model is introduced. Common activities in the business process model are further factored and summarized using pre- and post-factoring operations. The proposed business process modeling method is language-independent. An ICT office in Mazandaran Power Distribution Company is used as a case study to exemplify QABPEM. Our evaluation results demonstrates the capability of the proposed method compared with the existing ones.

scholarly journals Plug-in for Annotating Semantic Efferct on BPMN Business Process Models

2019 ◽  
Vol 4 (2) ◽  
pp. 116
Author(s):  
Hilman Nuril Hadi ◽  
Tri Astoto Kurniawan ◽  
Ismiarta Aknuranda
Keyword(s):  
Business Process ◽  
Process Modeling ◽  
Process Model ◽  
Business Process Modeling ◽  
Process Models ◽  
Business Process Model ◽  
Activity Type ◽  
Modeling Tools ◽  
Business Process Models ◽  
Design Time

BPMN has become the standard of business process modeling indescribing the existing series of business process. By engaging BPMN, an analystwould possibly able to model the whole business process activities in whichhe/she may analyze business process upon design time. It can be done byanalyzing the structure, behavior, or semantic of process model. In certaincondition one may ask a question what would the effects of the process be if itwere to be executed up to this point?. However, it cannot be solved with onlygraphical notation, but with its semantics. In practice, several modeling tools stilldo not provide a feature for managing information regarding the effects/resultsin the business process model. In fact, analysts should be supported with a toolin order to semantically enrich a process model with its effects. This articledescribes effect annotation semantically towards activity in the BPMN modelincluding the rules in representing its effects. The effect annotation will be suitedtowards activity type (atomic and compound activities). The outcomes of plugin development of eclipse BPMN2 modeler for representing semantic effect arealso described in this paper.

Ownership relevance in aspect-oriented business process models

2016 ◽  
Vol 22 (3) ◽  
pp. 566-593 ◽  
Author(s):  
Julio Cesar Sampaio do Prado Leite ◽  
Flavia Maria Santoro ◽  
Claudia Cappelli ◽  
Thais Vasconcelos Batista ◽  
Fabiana Jack Nogueira Santos
Keyword(s):  
Business Process ◽  
Process Modeling ◽  
Process Model ◽  
Business Process Modeling ◽  
Process Models ◽  
Actor Model ◽  
Content Type ◽  
Business Process Modeling Notation ◽  
Representation Scheme

Purpose – The purpose of this paper is to propose a representation scheme based on the i* strategic actor model to represent the process owner information and show how to incorporate this approach into the event driven process chain and Business Process Modeling Notation-BPMN meta-models and also into the aspect-oriented business process modeling (BPM) context. Design/methodology/approach – The authors use a case study in a real setting to evaluate the proposal and a controlled experiment to get more evidence about its relevance. Findings – The authors presented evidence both from a case study in a real-world library showing the importance of representing – previously unavailable – process owner information, and from an experiment which involved participants analyzing the same models of the case study, confirming the preliminary evidences. It is important to stress the recognition that the proposed representation provided more transparency, in terms of ownership, than the usual BPM models. These benefits are due to the combination of the aspect-oriented approach and the strategic actor model, providing ownership information in a more transparent way. Originality/value – The authors not only argue the importance of clearly established process ownership, both of the core process and the aspectual process, but also the authors presented an approach to represent the actor involved in process and aspect ownership as an instantiation of the i* strategic actor. Using this approach, the process owner can be defined in terms of actors instead of the activities performed. It is also possible to define the aspect owner and to include the aspectual process concept in the business process model.

scholarly journals Analysis of Using Resources in Business Process Modeling and Simulation

2014 ◽  
Vol 16 (1) ◽  
pp. 19-25 ◽  
Author(s):  
Olegas Vasilecas ◽  
Evaldas Laureckas ◽  
Audrius Rima
Keyword(s):  
Modeling And Simulation ◽  
Business Process ◽  
Process Modeling ◽  
Process Model ◽  
Graphical Representation ◽  
Business Process Modeling ◽  
Business Process Model ◽  
Simulation Tools ◽  
Resource Modeling ◽  
Process Instance

Abstract One of the key purposes of Business Process Model and Notation (BPMN) is to support graphical representation of the process model. However, such models have a lack of support for the graphical representation of resources, whose processes are used during simulation or execution of process instance. The paper analyzes different methods and their extensions for resource modeling. Further, this article presents a selected set of resource properties that are relevant for resource modeling. The paper proposes an approach that explains how to use the selected set of resource properties for extension of process modeling using BPMN and simulation tools. They are based on BPMN, where business process instances use resources in a concurrency manner.

A Method of Business Process Modeling Based on Petri Net

2010 ◽  
Vol 450 ◽  
pp. 413-416
Author(s):  
Yong Ping Hao ◽  
Xiao Lei Xu ◽  
Wei Ping Shao ◽  
Peng Fei Zeng
Keyword(s):  
Business Process ◽  
Petri Net ◽  
Process Modeling ◽  
Process Model ◽  
Business Process Management ◽  
Process Management ◽  
Business Process Modeling ◽  
Parallel Process ◽  
Workflow Modeling ◽  
Business Process Model

Through the analysis of the execution and dispatching principle of the Petri net, the business process management mode based on Petri net is proposed. We merge the place node and the transition node, and reside the token in the node. The only token in process instances and the sub-token in parallel process are introduced, which can avoid conflicts caused by multi-tokens. The business process model for the drawings design and approval is established, and it is verified by the workflow modeling system.

scholarly journals Common Process Extraction pada Model Proses Bisnis Tebang Muat Angkut (TMA)

2020 ◽  
Vol 7 (2) ◽  
pp. 71-76
Author(s):  
Salma Fatia ◽  
Muhammad Ainul Yaqin ◽  
Adi Heru Utomo
Keyword(s):  
Business Process ◽  
Process Modeling ◽  
Process Model ◽  
Structural Similarity ◽  
Business Process Modeling ◽  
Process Models ◽  
Business Process Models ◽  
Common Fragment ◽  
Behavioral Similarity ◽  
Business Process Modeling Notation

Abstract— In an organizational environment, there are various business process models with the same procedures. If an organization builds a system with the same procedure repeatedly, it will undoubtedly incur a lot of effort and money. Therefore, it is necessary to extract common fragments to save effort. This research uses four scenarios of business process models: sequence, branching, nested branching, and looping. This study uses Business Process Modeling Notation (BPMN) notation so that the process model consists of activities, connectors, and gateways. Structural similarity is measured using the Jaccard similarity formula by comparing the process model. The similarity of behavior is measured using the Transition Adjacency Relations (TARs) method to obtain common fragments. The results show that the sequence process model will produce a common fragment that tends to be sequential too. The branching will produce a common fragment that tends to branch, and nested branching will produce a common fragment that tends to be branched and nested, as well as looping will produce a common fragment contains looping too. The experimental results show that the proposed method can extract common fragments based on the available business process models. Keywords—BPMN; common fragment; behavioral similarity; TARs   Abstrak— Dalam lingkungan organisasi, terdapat berbagai model proses bisnis dengan prosedur yang sama. Jika suatu organisasi membangun sistem dengan prosedur yang sama secara berulang-ulang, niscaya akan mengeluarkan banyak tenaga dan biaya. Oleh karena itu, perlu mengekstrak fragmen umum untuk menghemat tenaga. Penelitian ini menggunakan empat skenario model proses bisnis yaitu sequence, branching, nested branching, dan looping. Penelitian ini menggunakan notasi Business Process Modeling Notation (BPMN) sehingga model proses terdiri dari aktivitas, konektor, dan gateway. Kemiripan struktural diukur menggunakan rumus kemiripan Jaccard dengan membandingkan model proses. Kesamaan perilaku diukur menggunakan metode Transition Adjacency Relations (TARs) untuk mendapatkan fragmen yang sama. Hasil penelitian menunjukkan bahwa model sequence process akan menghasilkan common fragment yang cenderung berurutan juga. Percabangan akan menghasilkan fragmen umum yang cenderung bercabang, dan percabangan bersarang akan menghasilkan fragmen umum yang cenderung bercabang dan bersarang, serta perulangan akan menghasilkan fragmen umum yang berisi perulangan juga. Hasil eksperimen menunjukkan bahwa metode yang diusulkan dapat mengekstrak fragmen umum berdasarkan model proses bisnis yang tersedia. Keywords—BPMN; common fragment; kemiripan perilaku; TARs

scholarly journals Spreadsheets as Interoperability Solution for Business Process Representation

2019 ◽  
Vol 9 (2) ◽  
pp. 345 ◽  
Author(s):  
Piotr Wiśniewski ◽  
Krzysztof Kluza ◽  
Edyta Kucharska ◽  
Antoni Ligęza
Keyword(s):  
Business Process ◽  
Process Modeling ◽  
Process Model ◽  
Business Process Modeling ◽  
Process Models ◽  
The Other ◽  
Business Process Models ◽  
Task List ◽  
Process Representation ◽  
A Company

Business process models help to visualize processes of an organization. In enterprises, these processes are often specified in internal regulations, resolutions or other law acts of a company. Such descriptions, like task lists, have mostly form of enumerated lists or spreadsheets. In this paper, we present a mapping of process model elements into a spreadsheet representation. As a process model can be represented in various notations, this can be seen as an interoperability solution for process knowledge interchange between different representations. In presenting the details of the solution, we focus on the popular BPMN representation, which is a de facto standard for business process modeling. We present a method how to generate a BPMN process model from a spreadsheet-based representation. In contrast to the other existing approaches concerning spreadsheets, our method does not require explicit specification of gateways in the spreadsheet, but it takes advantage of nested list form. Such a spreadsheet can be created either manually or merged from the task list specifications provided by users.

scholarly journals Mapping Timer Event from Business Process Model on Windows Workflow Foundation

2012 ◽  
Vol 4 ◽  
pp. 168-171
Author(s):  
Jian Deng ◽  
Bo Chen ◽  
Jia Zhi Zeng
Keyword(s):  
Business Process ◽  
Process Modeling ◽  
Process Model ◽  
Business Process Modeling ◽  
File Format ◽  
Business Process Model ◽  
Process Definition ◽  
Business Process Modeling Notation ◽  
General Business

A method to mapping timer event in business process model into Activity in Windows Workflow Foundation (WF) was proposed. This method can work with general business process because the model is designed in Business Process Modeling Notation (BPMN) 1.1 and it uses XML Process Definition Language (XPDL) 2.1 version as the file format. Experiment result showed that timer event could be directly mapped to flowchart model in Windows Workflow Foundation and the mapped flowchart model satisfied the functionality of timer event.

scholarly journals Business Education and Training During the Enterprises' Digital Transformation: Notation Alignment and Equivalence Rules Among the Enterprises' Business Process Models

2021 ◽  
pp. 51-70
Author(s):  
Athanasios G. Lazaropoulos
Keyword(s):  
Petri Nets ◽  
Business Process ◽  
Process Modeling ◽  
Process Model ◽  
Direct Conversion ◽  
Business Process Modeling ◽  
Digital Transformation ◽  
Process Models ◽  
Complex Constraints ◽  
Business Process Modeling Notation

Business process modeling attracts great importance in enterprises due to the need for a graphically simplified and less verbal way to manage their operations. Nevertheless, the existence of various process modeling standards across the different departments of the same enterprise, such as Business Process Modeling Notation (BPMN) diagrams, classic flowcharts, Gantt charts and Petri nets, urges their notation alignment. After the business process model nota-tion alignment, complex constraints and relationships among the enterprise's department processes can be automated and simplified. In the light of the digital transformation of today's enterprises, the main objective of this paper is the proposal of a straightforward and simplified business educational equivalence table so that a direct conversion among BPMN diagrams, flowcharts, Gantt Charts and Petri Nets can be locally fulfilled by non-specialized personnel in each enterprise's department. The methodology of this paper can be generalized in every enterprise where the aforementioned process modeling standards across its different departments coexist.

scholarly journals Influence of diagram layout and scrolling on understandability of BPMN processes: an eye tracking experiment with BPMN diagrams

2021 ◽  
Author(s):  
Daniel Lübke ◽  
Maike Ahrens ◽  
Kurt Schneider
Keyword(s):  
Eye Tracking ◽  
Business Process ◽  
Process Modeling ◽  
Business Models ◽  
Business Process Modeling ◽  
Process Models ◽  
Software Systems ◽  
Process Diagrams ◽  
Style Guides ◽  
Important Activity

AbstractBusiness process modeling is an important activity for developing software systems—especially within digitization projects and when realizing digital business models. Specifying requirements and building executable workflows is often done by using BPMN 2.0 process models. Although there are several style guides available for BPMN, e.g., by Silver and Richard (BPMN method and style, vol 2, Cody-Cassidy Press, Aptos, 2009), there has not been much empirical research done into the consequences of the diagram layout. In particular, layouts that require scrolling have not been investigated yet. The aim of this research is to establish layout guidelines for business process modeling that help business process modelers to create more understandable business process diagrams. For establishing benefits and penalties of different layouts, a controlled eye tracking experiment was conducted, in which data of 21 professional software developers was used. Our results show that horizontal layouts are less demanding and that as many diagram elements as possible should be put on the initially visible screen area because such diagram elements are viewed more often and longer. Additionally, diagram elements related to the reader’s task are read more often than those not relevant to the task. BPMN modelers should favor a horizontal layout and use a more complex snake or multi-line layout whenever the diagrams are too large to fit on one page in order to support BPMN model comprehension.

Sign in / Sign up

Export Citation Format

Share Document