MECHANICS-BASED BEVEL-TIP NEEDLE DEFLECTION MODEL DURING NEEDLE–SOFT TISSUE INTERACTION PROCESS

2014 ◽  
Vol 14 (05) ◽  
pp. 1450076 ◽  
Author(s):  
SHAN JIANG ◽  
XINGJI WANG ◽  
ZHILIANG SU
Keyword(s):  
Interaction Model ◽  
Needle Insertion ◽  
Force Model ◽  
Insertion Force ◽  
Simulation Accuracy ◽  
Tissue Properties ◽  
Tissue Interaction ◽  
Needle Deflection ◽  
Tissue Equivalent ◽  
Needle Insertion Force

Flexible needle insertion is performed in many clinical and brachytherapy procedures. Needle bending which results from needle–tissue interaction and needle flexibility plays a pivotal role in implantation accuracy. In this paper, a needle insertion force model and a mechanics-based needle deflection model are applied in simulating the real needle insertion process. Using tissue-equivalent materials, the needle force model is acquired from needle insertion experiments. Based on the principle of minimum potential energy, a mechanics-based model is developed to calculate needle deflection. The needle deflection model incorporates needle insertion forces model, needle–tissue interaction model, needle geometric, and tissue properties. The bending–stretching coupling and geometric non-linearity of the flexible needle are both taken into consideration in the needle deflection model. A modified p–y curves method is first introduced in depicting the lateral needle–tissue interaction. The comparison between experimental and simulation results of needle deflection shows that our mechanics-based model can simulate the deflection of the flexible needle with reasonable accuracy. Parametric studies on different geometry properties of needles show that our mechanics-based model can precisely predict the needle deflection when more than one parameter is changed. In addition, as the needle deflection results are obtained numerically by Rayleigh–Ritz approach, further study on the form of deflection formulation leads to the conclusion that choosing a higher order polynomial can improve the overall simulation accuracy.

Needle Insertion Force Model for Haptic Simulation

2015 ◽  
Author(s):  
Adam Gordon ◽  
Inki Kim ◽  
Andrew C. Barnett ◽  
Jason Z. Moore
Keyword(s):  
Force Feedback ◽  
Needle Insertion ◽  
Model Parameters ◽  
Force Model ◽  
Medical Procedures ◽  
Insertion Force ◽  
Clinical Scenarios ◽  
Needle Insertion Force ◽  
Haptic Simulation ◽  
Simulation Systems

Percutaneous medical procedures rely upon clinicians performing precise needle insertion in soft tissue. The utility of haptic simulation systems in training clinicians for these procedures is highly dependent upon the ability to render accurate insertion force feedback. This paper presents a piecewise mathematical model for insertion force that does not require tissue material properties, detailed mechanical approximations, or complex computations. With manipulation of model parameters, a wide variety of insertion tasks and clinical scenarios can be modeled. Through needle insertion experiments and parameter estimation, this model was demonstrated to replicate the insertion forces associated with a variety of needle and tissue types. In 11 of 12 needle and tissue combinations tested, the model replicated the insertion force with an average absolute mean error of less than 0.065 N.

Fracture Mechanics Model of Needle Cutting Tissue

2015 ◽  
Vol 138 (1) ◽  
Author(s):  
Andrew C. Barnett ◽  
Yuan-Shin Lee ◽  
Jason Z. Moore
Keyword(s):  
Fracture Toughness ◽  
Fracture Mechanics ◽  
Shear Modulus ◽  
Friction Force ◽  
Ex Vivo ◽  
Strain Curve ◽  
Needle Insertion ◽  
Force Model ◽  
Insertion Force ◽  
Needle Insertion Force

This work develops a needle insertion force model based on fracture mechanics, which incorporates the fracture toughness, shear modulus, and friction force of the needle and tissue. Ex vivo tissue experiments were performed to determine these mechanical tissue properties. A double insertion of the needle into the tissue was utilized to determine the fracture toughness. The shear modulus was found by applying an Ogden fit to the stress–strain curve of the tissue achieved through tension experiments. The frictional force was measured by inserting the needle through precut tissue. Results show that the force model predicts within 0.2 N of experimental needle insertion force and the fracture toughness is primarily affected by the needle diameter and needle edge geometry. On average, the tearing force was found to account for 61% of the total insertion force, the spreading force to account for 18%, and the friction force to account for the remaining 21%.

Needle Insertion Control Method for Minimizing Both Deflection and Tissue Damage

2019 ◽  
Vol 04 (01) ◽  
pp. 1842005
Author(s):  
Ryosuke Tsumura ◽  
Yusuke Takishita ◽  
Hiroyasu Iwata
Keyword(s):  
Tissue Damage ◽  
Control Method ◽  
Axial Rotation ◽  
Needle Insertion ◽  
Experimental Results ◽  
Insertion Force ◽  
Tissue Sections ◽  
Needle Deflection ◽  
Hole Area ◽  
Insertion Method

Because fine needles can easily be deflected, accurate needle insertion is often difficult. Lower abdominal insertion is particularly difficult because of less imaging feedback; thus, an approach for allowing a straight insertion path by minimizing deflection is beneficial in cases of lower abdominal insertion. Although insertion with axial rotation can minimize deflection, the rotational insertion may cause tissue damage. Therefore, we established a novel insertion method for minimizing both deflection and tissue damage by combining rotation and vibration. Using layered tissues, we evaluated the effect of a combination of rotation and vibration in terms of deflection and tissue damage, which were measured by the insertion force and torque, and the area of the hole created by the needle using histological tissue sections to measure tissue damage. The experimental results demonstrated that insertion with unidirectional rotation is risky in terms of tissue wind-up, while insertion with bidirectional rotation can decrease deflection and avoid wind-up. We also found that insertion with vibration can decrease the insertion force and torque. Therefore, insertion with a combination of bidirectional rotation and vibration can minimize needle deflection and tissue damage, including the insertion force and torque and the hole area.

A Novel Material Point Method Based Needle-Tissue Interaction Model

2019 ◽  
Author(s):  
Murong Li ◽  
Yong Lei
Keyword(s):  
Material Point Method ◽  
Interaction Model ◽  
Needle Insertion ◽  
Friction Model ◽  
Material Point ◽  
Contact Forces ◽  
Point Method ◽  
Virtual Surgery ◽  
Tissue Interaction ◽  
Novel Material

Abstract Needle-tissue interaction model plays an important role in virtual surgery training, pre-intervention planning and intra-intervention guidance. Traditionally, finite element methods (FEM) had been a primary and popular way for simulation modeling. However, FEM, as a mesh-based numerical calculations, is likely to encounter numerical difficulties due to mesh distortion as needle insertion process includes damage, fracture and penetration. In this work, a novel material point method (MPM) based needle-tissue interaction model is proposed, which combines the advantages of Lagrangian and Euler methods. A simplified contact algorithm and friction model are integrated to calculate contact forces as well as the resultant tissue deformations. Both preliminary contact forces and deformation results are compared with test experiments, which show that the maximum and mean displacement errors are 0.9768mm and 0.5134mm, respectively while the mean relative errors of force is 14%. This preliminary result demonstrates that MPM has great potential in needle-tissue interaction modeling.

scholarly journals Modeling of geometry and insertion force of a new lancet medical needle

2019 ◽  
Vol 103 (1) ◽  
pp. 003685041989107
Author(s):  
Yingchun Qi ◽  
Jingfu Jin ◽  
Tingkun Chen ◽  
Qian Cong
Keyword(s):  
Great Influence ◽  
Large Change ◽  
Processing Parameters ◽  
Needle Insertion ◽  
Grinding Wheel ◽  
Insertion Force ◽  
Factors Affecting ◽  
Organ Tissue ◽  
Needle Insertion Force ◽  
The Relationship

Lancet needle is a typical medical treatment device. Its tip consists of two lancet planes and one bevel plane. When the lancet needle is inserted into soft organ tissue, the insertion force may influence the needle cutting direction and treatment effect and increase the pain. One of the main factors affecting this insertion force is the geometry of the needle tip. Based on the research on the shape and processing method of the conventional lancet needle, a new lancet needle tip geometry was obtained by adjusting the relative position of the grinding wheel to the needle. A mathematical model of this new lancet needle was established. The relationship between processing parameters and needle shape was analyzed, and the needle insertion force was predicted. Compared with the conventional lancet needle, the new lancet needle is sharper, and the insertion force on the cutting edge is smaller. However, this change in the grinding position of the needle lancet plane has a great influence on the shape of needle tip near the intersection of the bevel plane and the lancet plane. Some special second bevel angle and rotated angle will cause a large change in the specific force at the intersection place, which is not conducive to reducing the insertion force.

Sign in / Sign up

Export Citation Format

Share Document