Novel isotropic anti-tri-missing rib auxetics with prescribed in-plane mechanical properties over large deformations

Author(s):  
Yilin Zhu ◽  
Songhui Jiang ◽  
Jian Li ◽  
Deepak Kumar ◽  
Qingyuan Wang ◽  
...  
1966 ◽  
Vol 39 (5) ◽  
pp. 1436-1450
Author(s):  
K. J. Smith ◽  
D. Puett

Abstract The birefringence of natural rubber networks at large deformations has been investigated experimentally and compared with the simultaneously determined stress—strain behavior. Our data is analyzed using a statistical theory of flexibly jointed chains, derived herein, which is believed to be more significant for the particular range of deformation used than the theories of Treloar and of Kuhn and Grün. In addition, the experimental data of Saunders is commented on in light of our theoretical development. We find that for network extensions exceeding those of the Gaussian region there is little correlation between the observed and theoretical behavior of the stress and birefringence (based upon the theory of flexibly jointed chains) and this lack of agreement is attributed to the fact that the statistical parameters needed for the description of the optical chain properties differ in magnitude from those required for the mechanical properties. Furthermore, by considering the points of incipient crystallization the strain behavior of the stress-optical coefficient is highly indicative of nonGaussian behavior rather than crystallization, and therefore yields strong support for the position that nonGaussian behavior does exist in rubber networks.


2009 ◽  
Vol 294 ◽  
pp. 27-38 ◽  
Author(s):  
Fabian Ferrano ◽  
Marco Speich ◽  
Wolfgang Rimkus ◽  
Markus Merkel ◽  
Andreas Öchsner

This paper investigates the mechanical properties of a new type of hollow sphere structure. For this new type, the sphere shell is perforated by several holes in order to open up the inner sphere volume and surface. The mechanical behaviour of perforated sphere structures under large deformations and strains in a primitive cubic arrangement is numerically evaluated by using the finite element method for different hole diameters and different joining techniques.


1944 ◽  
Vol 17 (4) ◽  
pp. 813-825 ◽  
Author(s):  
L. R. G. Treloar

Abstract Stress-strain data are given for two types of vulcanized rubber: (1) an 8% S rubber, and (2) a latex rubber. The types of deformation studied were simple elongation, 2-dimensional extension (or compression), pure shear, and combined elongation and shear. Comparison with the theoretical relations based on the molecular-network model shows the agreement to be good for the 2-dimensional extension, but less good for simple elongation and shear. The effect of combined elongation and shear is satisfactorily accounted for. It is concluded that the theory provides a satisfactory explanation of rubberlike elasticity, and forms a useful basis for the description of the mechanical properties of rubber subjected to large deformations of any type.


1994 ◽  
Vol 349 ◽  
Author(s):  
D.H. Robertson ◽  
B.I. Dunlap ◽  
D.W. Brenner ◽  
J.W. Mintmire ◽  
C.T. White

ABSTRACTWe report the design of several symmetric star-shaped closed carbon cages using ball and stick models. Despite the presence of seven- and eight-membered rings, these hollow carbon sprockets—containing less than 500 carbon atoms—are predicted to be more energetically stable than C60. Also, we show that these sprockets can be connected to capped fullerene tubules to form a nanostructure similar to a mechanical gear and shaft. In addition, using molecular dynamics and a reactive hydrocarbon potential, we show that these gears can be turned against each other at high angular velocities without large deformations. These nanogears illustrate some of the possible complex small structures that can be formed by inserting 5-, 7-, and 8-membered rings in an otherwise graphitic network. These nanogears also show surprisingly robust mechanical properties.


Author(s):  
Tyler G Tuttle ◽  
Duncan Morhardt ◽  
Andrea Poli ◽  
John M. Park ◽  
Ellen M. Arruda ◽  
...  

Abstract The urinary bladder is a highly dynamic organ, that undergoes large deformations several times a day. Mechanical characteristics of the tissue are crucial in determining the function, and dysfunction, of the organ. Yet, literature reporting on the mechanical properties of human bladder tissue is scarce and, at times, contradictory. In this study, we focused on mechanically testing tissue from both human and pig bladders using identical protocols, to validate the use of pigs as a model for the human bladder. Furthermore, we tested the effect on tissue mechanical properties of two treatments, elastase to digest elastin fibers and oxybutynin to reduce smooth muscle cells spasticity, as well as of the anatomical direction of testing. We also implemented two different material models to aid in the interpretation of the experimental results. We found that human tissue behaves similarly to pig tissue at high deformations (collagen-dominated behavior) while we detected differences between the species at low deformations (amorphous matrix-dominated behavior). Our results also suggest that elastin could play a role in determining the behavior of the collagen fibers network. Finally, we confirmed the anisotropy of the tissue which reached higher stresses in the transverse when compared to the longitudinal direction.


2015 ◽  
Vol 137 (4) ◽  
Author(s):  
Giuseppe Pintaude

A differential hardness is needed for a spherical indenter to avoid large deformations of it during an indentation process. Tabor proposes a criterion for this, where the ball hardness should be at least 2.5 times harder than the specimen. Later, five models expand the Tabor proposal, such that the critical interference corresponding to the inception of plastic deformation depends on the Poisson's ratio. This paper discusses the difference among these models, showing that they can be divided in two groups only. In addition, their similarity depending on the specific mechanical properties of tested material was used to make the conversion between yield stress and hardness.


1997 ◽  
Vol 67 (5) ◽  
pp. 316-320 ◽  
Author(s):  
I. Krucinska ◽  
S. Krucinski

This paper evaluates a loop bending test that can measure the intrinsic strength and breaking strain of carbon fibers. The discussion extends from the applicability of a closed-form solution for prismatic bar flexure, subjected to large deformations, to an interpretation of the test results. The assumptions embedded in the closed-form solution are verified by finite element computer simulations of the loop test.


2016 ◽  
Vol 25 (5) ◽  
pp. 054002 ◽  
Author(s):  
Tomasz Strek ◽  
Hubert Jopek ◽  
Krzysztof W Wojciechowski

Sign in / Sign up

Export Citation Format

Share Document