ABSTRACTCarbon nanotubes (CNTs) in the family of nanostructured carbon materials are of great interest because of several unique physical properties. For space applications, it needs to be shown that CNTs are physically stable and structurally unaltered when subjected to irradiation becomes indispensable. The CNT films were grown by microwave Carbon nanotubes (CNTs) in the family of nanostructured carbon materials are of great interest because of several unique physical properties. For space applications, it needs to be shown that CNTs are physically stable and structurally unaltered when subjected to irradiation becomes indispensable. The CNT films were grown by microwave plasma-assisted chemical vapor deposition (MWCVD) technique using Fe as catalyst. Synthesis of both single- and multiwalled CNTs (SW and MW, respectively) were achieved by varying the thickness of the Fe catalyst layer. To investigate the influence of electron-beam irradiation, CNTs were subjected to low and/or medium energy electron-beam irradiation continuously for a few minutes to several hours. The CNT films prior to and post-irradiation were assessed in terms of their microscopic structure and physical properties to establish property-structure correlations. The characterization tools used to establish such correlations include scanning electron microscopy (SEM), high resolution transmission electron microscopy (HRTEM), Raman spectroscopy (RS), and current versus voltage (I-V) measuring contact resistance (two-probe) and dc conductivity (four-probe) properties. Dramatic improvement in the I-V properties for single-walled (from semiconducting to quasi-metallic) and relatively small but systematic behavior for multi-walled (from metallic to more metallic) with increasing irradiation hours is discussed in terms of critical role of defects. Alternatively, contact resistance of single-walled nanotubes decreased by two orders of magnitude on prolonged E-beam exposures. Moreover, these findings provided onset of saturation and damage/degradation in terms of both the electron beam energy and exposure times. Furthermore, these studies apparently brought out a contrasting comparison between mixed semiconducting/metallic (single-walled) and metallic (multiwalled) nanotubes in terms of their structural modifications due to electron-beam irradiation.
Increased Tensile Strength of Carbon Nanotube Yarns and Sheets through Chemical Modification and Electron Beam Irradiation
