Ventilation inhomogeneity during controlled ventilation. Which index should be used?

1988 ◽  
Vol 65 (5) ◽  
pp. 2030-2039 ◽  
Author(s):  
A. Larsson ◽  
C. Jonmarker ◽  
O. Werner
Keyword(s):  
Tidal Volume ◽  
Dead Space ◽  
Mean Value ◽  
Mixing Ratio ◽  
Tracer Gas ◽  
Ventilation Inhomogeneity ◽  
Pulmonary Clearance ◽  
Significant Difference ◽  
Uneven Ventilation ◽  
Spontaneously Breathing

Six indexes for diagnosing uneven ventilation by tracer gas washout were studied. The indexes were lung clearance index, mixing ratio, Becklake index, multiple-breath alveolar mixing inefficiency, moment ratio, and pulmonary clearance delay, all of which increase with impaired pulmonary gas mixing. In model lung tests, indexes that compared the actual washout curve with a calculated ideal curve (mixing ratio, multiple-breath alveolar mixing inefficiency, and pulmonary clearance delay) were unaffected by changes in tidal volume and series dead space, whereas the others varied markedly. In both spontaneously breathing and mechanically ventilated patients all indexes showed a significant difference between smokers and nonsmokers (P less than 0.002), but the indexes were somewhat different in their assessment of different ventilatory patterns. However, the mean value for all indexes, with the exception of mixing ratio, was smallest with a fast insufflation followed by an end-inspiratory pause. Any of the indexes may be useful if its limitations are recognized, but mixing ratio, multiple-breath alveolar mixing inefficiency, and pulmonary clearance delay seem preferable, because they are not affected by changes in tidal volume and dead space fraction.

Detection of Circulating Tissue Factor and Factor VII in a Normal Population

1996 ◽  
Vol 75 (05) ◽  
pp. 772-777 ◽  
Author(s):  
Sybille Albrecht ◽  
Matthias Kotzsch ◽  
Gabriele Siegert ◽  
Thomas Luther ◽  
Heinz Großmann ◽  
...  
Keyword(s):  
Tissue Factor ◽  
Normal Population ◽  
Mean Value ◽  
Factor Vii ◽  
Significant Difference ◽  
Age Dependent ◽  
The Mean ◽  
Highly Correlated ◽  
And Gender

SummaryThe plasma tissue factor (TF) concentration was correlated to factor VII concentration (FVIIag) and factor VII activity (FVIIc) in 498 healthy volunteers ranging in age from 17 to 64 years. Immunoassays using monoclonal antibodies (mAbs) were developed for the determination of TF and FVIIag in plasma. The mAbs and the test systems were characterized. The mean value of the TF concentration was 172 ± 135 pg/ml. TF showed no age- and gender-related differences. For the total population, FVIIc, determined by a clotting test, was 110 ± 15% and the factor VIlag was 0.77 ± 0.19 μg/ml. FVII activity was significantly increased with age, whereas the concentration demonstrated no correlation to age in this population. FVII concentration is highly correlated with the activity as measured by clotting assay using rabbit thromboplastin. The ratio between FVIIc and FVIIag was not age-dependent, but demonstrated a significant difference between men and women. Between TF and FVII we could not detect a correlation.

Risk Factors in Diabetes and Pregnant Women with Urinary Tract Infections Compared to Younger Aged Female.

2018 ◽  
Vol 1 (3) ◽  
pp. 26-38
Author(s):  
Abdulghani Mohamed Alsamarai ◽  
Shler Ali Khorshed
Keyword(s):  
Risk Factors ◽  
Urinary Tract Infection ◽  
Urinary Tract ◽  
Tract Infection ◽  
Pregnant Women ◽  
Female Student ◽  
Mean Value ◽  
Infected Female ◽  
Significant Difference ◽  
Tract Infections

Background: Urinary tract infection is common with health impact in women and characterised by failure to treatment and recurrent episodes. Aim: This study was conducted to determine the risk factors for the development of urinary tract infection in diabetic and pregnant women in comparison to student female. Materials and methods: A prospective cross-sectional study conducted during the period from 1st of June 2015 to the end of January 2016. The population included in the study are 563 women, of them 425 were outpatients, and 138 were inpatients. Their age range between 18 and 80 years, with a mean age of 33.59±15.29 years. Urine samples collected and cultured on blood agar and MacConkey agar by spread plate technique. Bacterial colonies with different morphology were selected, purified and identified according to their biochemical characteristics using conventional standard methods. Results: In diabetic women, there were no significant difference in mean age and BMI values between culture positive and culture negative groups. However, pus cell mean scale was significantly higher [P=0.000] in women with urinary tract infection [1.76±1.25] than in those with negative culture [0.69±1.00]. In pregnant women, BMI mean value was significantly [P=0.013] lower in pregnant women with UTI [26.14] as compared to those without infection [26.99]. Pus cell scale mean value was significantly [P=0.000] higher in pregnant women with UTI [1.55] than women with negative UTI [0.85]. While there was no significant difference in mean age between UTI positive and negative pregnant women. In female student, there was a significant difference between UTI infected and non-infected in mean age [P=0.041] and pus cell scale [P=0.000]. However, BMI was not significantly different between infected and non-infected female student. Other risk factors association are variables in the 3 groups when analysed using X2, while AUC and OR show different trends of association between risk factors and UTI. Conclusion: BMI, pus cell scale, child number, delivery method, operation history and hospital setting were significantly associated with culture positivity in the 3 studied groups as determined by AUC. While OR confirmed association with pus sale scale in the 3 groups.

A new simpler approach to measure the strength of toe plantar flexion requiring no mechanical restraint with a light-weight device

2021 ◽  
pp. 095441192110029
Author(s):  
Yuko Komuro ◽  
Yuji Ohta
Keyword(s):  
Plantar Flexion ◽  
Mean Value ◽  
Simple Approach ◽  
Light Weight ◽  
New Approach ◽  
Mean Values ◽  
Mechanical Restraint ◽  
Significant Difference ◽  
Ankle Joints ◽  
The Mean

Conventionally, the strength of toe plantar flexion (STPF) is measured in a seated position, in which not only the target toe joints but also the knee and particularly ankle joints, are usually restrained. We have developed an approach for the measurement of STPF which does not involve restraint and considers the interactions of adjacent joints of the lower extremities. This study aimed to evaluate this new approach and comparing with the seated approach. A thin, light-weight, rigid plate was attached to the sole of the foot in order to immobilize the toe area. Participants were 13 healthy young women (mean age: 24 ± 4 years). For measurement of STPF with the new approach, participants were instructed to stand, raise the device-wearing leg slightly, plantar flex the ankle, and push the sensor sheet with the toes to exert STPF. The sensor sheet of the F-scan II system was inserted between the foot sole and the plate. For measurement with the seated approach, participants were instructed to sit and push the sensor with the toes. They were required to maintain the hip, knee, and ankle joints at 90°. The mean values of maximum STPF of the 13 participants obtained with each approach were compared. There was no significant difference in mean value of maximum STPF when the two approaches were compared (new: 59 ± 23 N, seated: 47 ± 33 N). The coefficient of variation of maximum STPF was smaller for data obtained with the new approach (new: 39%, seated: 70%). Our simple approach enables measurement of STPF without the need for the restraints that are required for the conventional seated approach. These results suggest that the new approach is a valid method for measurement of STPF.

scholarly journals Quality of life of obstetrics fistula patients before and after surgical repair in the Jimma University Medical Center, Southwest Ethiopia

2021 ◽  
Vol 21 (1) ◽  
Author(s):  
Tilahun Fufa Debela ◽  
Zerihun Asefa Hordofa ◽  
Aster Berhe Aregawi ◽  
Demisew Amenu Sori
Keyword(s):  
Quality Of Life ◽  
Surgical Repair ◽  
Obstetric Fistula ◽  
Medical Center ◽  
Mean Value ◽  
Significant Difference ◽  
Before And After ◽  
The Mean ◽  
Jimma University

Abstract Background The consequences of obstetric fistula on affected women are more than the medical condition. It has extensive physical, psychological, social, and economic consequences on them. Obstetric fistula affects the entire health and entire life of women. Women suffering from obstetric fistula are often abandoned by her partner, relatives, and the community. This study aimed to determine the quality of life of obstetrics fistula patients before and after surgical repair. Methods Institutional-based prospective, before and after study design was conducted in the Jimma University Medical Center from November 1, 2019–October 30, 2020. A face-to-face interview was conducted with fistula patients who visited Jimma University Medical center, fistula clinic during the study period. All fistula patients were included in the study. Accordingly, 78 women who underwent surgical repair were interviewed. The means and the standard deviation were computed using conventional statistics formulas. The unpaired t-test was used to compare two independent means, and one-way analysis of variance (ANOVA) was used to compare the quality of life before repair and after a successful repair. Linear regression analysis was done for identifying determinants of quality of life. A P value of 0.05 will be considered statistical significance. Result The overall quality of life of women was 58.17 ± 7.2 before the surgical repair and 71.20 ± 10.79 after surgical repair. The result indicates there is a significant difference in the mean value of pre and post-operative (P < 0.001). The overall satisfaction of women with their health status before the surgical repair was 22.5 ± 1.30and it has increased to 53.0 ± .90after surgical repair. The physical health dimension score was 16.51 ± 5.27 before the surgical repair while it has increased to 21.77 ± 5.38 after the surgical repair. The score of the social domain before the surgical repair was 5.19 ± 1.34 and it has increased to 7.13 ± 3.67 after the surgical repair. The score of the environmental health domain was 17.41 ± 2.89 before the surgery while it also increased to 21.65 ± 4.04 after the surgical repair. The results have shown there was a significant difference in the mean values of pre and post-operatives in both social and environmental scores (P < 0.001). The score of the psychological health domain before the surgery was 19.06 ± 1.46 and it was increased to 19.84 ± 3.21 after the surgical repair. The result showed there is a significant difference in mean value pre and post-operative (P = 0.048), though it is a slight improvement compared to other domains. Conclusion The overall quality of life of the patient with fistula was improved after successful surgical repair. Although all domains of quality of life had shown significant improvement after successful surgical repair, the psychological domain showed slight improvement.

scholarly journals Assessment of the Tissue Response to Modification of the Surface of Dental Implants with Carboxyethylphosphonic Acid and Basic Fibroblastic Growth Factor Immobilization (Fgf-2): An Experimental Study on Minipigs

Biology ◽  
2021 ◽  
Vol 10 (5) ◽  
pp. 358
Author(s):  
Javier Aragoneses ◽  
Ana Suárez ◽  
Nansi López-Valverde ◽  
Francisco Martínez-Martínez ◽  
Juan Manuel Aragoneses
Keyword(s):  
Surface Treatment ◽  
Test Group ◽  
Mean Value ◽  
Control Group ◽  
P Value ◽  
Implant Surface ◽  
Bone Contact ◽  
Bone Implant ◽  
Significant Difference ◽  
The Mean

The aim of this study was to evaluate the effect of implant surface treatment with carboxyethylphosphonic acid and fibroblast growth factor 2 on the bone–implant interface during the osseointegration period in vivo using an animal model. The present research was carried out in six minipigs, in whose left tibia implants were inserted as follows: eight implants with a standard surface treatment, for the control group, and eight implants with a surface treatment of carboxyethylphosphonic acid and immobilization of FGF-2, for the test group. At 4 weeks after the insertion of the implants, the animals were sacrificed for the histomorphometric analysis of the samples. The means of the results for the implant–bone contact variable (BIC) were 46.39 ± 17.49% for the test group and 34.00 ± 9.92% for the control group; the difference was not statistically significant. For the corrected implant–bone contact variable (BICc), the mean value of the test group was 60.48 ± 18.11%, and that for the control group, 43.08 ± 10.77%; the difference was statistically significant (p-value = 0.035). The new bone formation (BV/TV) showed average results of 27.28 ± 3.88% for the test group and 26.63 ± 7.90% for the control group, meaning that the differences were not statistically significant (p-value = 0.839). Regarding the bone density at the interthread level (BAI/TA), the mean value of the test group was 32.27 ± 6.70%, and that of the control group was 32.91 ± 7.76%, with a p-value of 0.863, while for the peri-implant density (BAP/TA), the mean value of the test group was 44.96 ± 7.55%, and that for the control group was 44.80 ± 8.68%, without a significant difference between the groups. The current research only found a significant difference for the bone–implant contact at the cortical level; therefore, it could be considered that FGF-2 acts on the mineralization of bone tissue. The application of carboxyethylphosphonic acid on the surface of implants can be considered a promising alternative as a biomimetic coating for the immobilization of FGF-2. Despite no differences in the new bone formation around the implants or in the interthread or peri-implant bone density being detected, the biofunctionalization of the implant surface with FGF-2 accelerates the mineralization of the bone–implant interface at the cortical level, thereby reducing the osseointegration period.

scholarly journals Nasal high flow clears anatomical dead space in upper airway models

2015 ◽  
Vol 118 (12) ◽  
pp. 1525-1532 ◽  
Author(s):  
Winfried Möller ◽  
Gülnaz Celik ◽  
Sheng Feng ◽  
Peter Bartenstein ◽  
Gabriele Meyer ◽  
...  
Keyword(s):  
Dead Space ◽  
Cylindrical Tube ◽  
Upper Airway ◽  
Supplemental Oxygen ◽  
High Flow ◽  
Tube Model ◽  
Tracer Gas ◽  
Nasal Cavities ◽  
Gas Removal ◽  
Airway Model

Recent studies showed that nasal high flow (NHF) with or without supplemental oxygen can assist ventilation of patients with chronic respiratory and sleep disorders. The hypothesis of this study was to test whether NHF can clear dead space in two different models of the upper nasal airways. The first was a simple tube model consisting of a nozzle to simulate the nasal valve area, connected to a cylindrical tube to simulate the nasal cavity. The second was a more complex anatomically representative upper airway model, constructed from segmented CT-scan images of a healthy volunteer. After filling the models with tracer gases, NHF was delivered at rates of 15, 30, and 45 l/min. The tracer gas clearance was determined using dynamic infrared CO2 spectroscopy and 81mKr-gas radioactive gamma camera imaging. There was a similar tracer-gas clearance characteristic in the tube model and the upper airway model: clearance half-times were below 1.0 s and decreased with increasing NHF rates. For both models, the anterior compartments demonstrated faster clearance levels (half-times < 0.5 s) and the posterior sections showed slower clearance (half-times < 1.0 s). Both imaging methods showed similar flow-dependent tracer-gas clearance in the models. For the anatomically based model, there was complete tracer-gas removal from the nasal cavities within 1.0 s. The level of clearance in the nasal cavities increased by 1.8 ml/s for every 1.0 l/min increase in the rate of NHF. The study has demonstrated the fast-occurring clearance of nasal cavities by NHF therapy, which is capable of reducing of dead space rebreathing.

scholarly journals One year of Raman lidar observations of free-tropospheric aerosol layers over South Africa

2015 ◽  
Vol 15 (10) ◽  
pp. 5429-5442 ◽  
Author(s):  
E. Giannakaki ◽  
A. Pfüller ◽  
K. Korhonen ◽  
T. Mielonen ◽  
L. Laakso ◽  
...  
Keyword(s):  
South Africa ◽  
Optical Properties ◽  
Biomass Burning ◽  
Mean Value ◽  
Aerosol Layer ◽  
Raman Lidar ◽  
Tropospheric Aerosol ◽  
Wide Range ◽  
Significant Difference ◽  
532 Nm

Abstract. Raman lidar data obtained over a 1 year period has been analysed in relation to aerosol layers in the free troposphere over the Highveld in South Africa. In total, 375 layers were observed above the boundary layer during the period 30 January 2010 to 31 January 2011. The seasonal behaviour of aerosol layer geometrical characteristics, as well as intensive and extensive optical properties were studied. The highest centre heights of free-tropospheric layers were observed during the South African spring (2520 ± 970 m a.g.l., also elsewhere). The geometrical layer depth was found to be maximum during spring, while it did not show any significant difference for the rest of the seasons. The variability of the analysed intensive and extensive optical properties was high during all seasons. Layers were observed at a mean centre height of 2100 ± 1000 m with an average lidar ratio of 67 ± 25 sr (mean value with 1 standard deviation) at 355 nm and a mean extinction-related Ångström exponent of 1.9 ± 0.8 between 355 and 532 nm during the period under study. Except for the intensive biomass burning period from August to October, the lidar ratios and Ångström exponents are within the range of previous observations for urban/industrial aerosols. During Southern Hemispheric spring, the biomass burning activity is clearly reflected in the optical properties of the observed free-tropospheric layers. Specifically, lidar ratios at 355 nm were 89 ± 21, 57 ± 20, 59 ± 22 and 65 ± 23 sr during spring (September–November), summer (December–February), autumn (March–May) and winter (June–August), respectively. The extinction-related Ångström exponents between 355 and 532 nm measured during spring, summer, autumn and winter were 1.8 ± 0.6, 2.4 ± 0.9, 1.8 ± 0.9 and 1.8 ± 0.6, respectively. The mean columnar aerosol optical depth (AOD) obtained from lidar measurements was found to be 0.46 ± 0.35 at 355 nm and 0.25 ± 0.2 at 532 nm. The contribution of free-tropospheric aerosols on the AOD had a wide range of values with a mean contribution of 46%.

Comparative assessment of odontometric parameters for gender determination: A hospital based cross-sectional study

2021 ◽  
Vol 8 (3) ◽  
pp. 147-152
Author(s):  
Mosmi Lomi ◽  
Jonathan Daniel M
Keyword(s):  
Sexual Dimorphism ◽  
Cross Sectional Study ◽  
Mean Value ◽  
The Body ◽  
Central Incisor ◽  
Maxillary Canine ◽  
Cross Sectional ◽  
Mean Values ◽  
Gender Determination ◽  
Significant Difference

Determining gender is one of the most important procedure in forensics. Teeth are made of the most enduring mineralized tissues in the body, as such, they have an extraordinary resistance to putrefaction and the effects of external agents (physical, thermal, mechanical, chemical or biological) which makes them invaluable material for anthropological, genetic, odontologic and forensic examinations.i)To assess the degree of sexual dimorphism in maxillary canine using maxillary canine index, maxillary first molar and central incisor using mesiodistal (MD) and buccolingual/buccopalatal (BL) dimensions of the crown. ii) To determine the accuracy of maxillary canine index, first molar and central incisor dimensions (mesiodistal and buccolingual/buccopalatal) in determining sex.This study consisted of total 30 participants (males=15, females=15) of age group ranging from 20 to 35 yrs. Measurement of dimensions of selected teeth were performed on maxillary cast using digital Vernier caliper, resolution 0.01mm. Data thus obtained were analyzed statistically.The mean values of all the measurements in males were greater than females. There was statistical significant difference in mean value of bucco-lingual width of molar, mesiodistal width of canine (on left side, right side and average) and the inter-canine distance between males and females. The buccolingual width of molar showed the highest % of sexual dimorphism (5.33%) and the mesiodistal width of molar showed the least % of dimorphism (0.7%). Bucco-lingual width of molar posed the highest prediction accuracy for gender determination. We conclude that buccolingual width of maxillary first molar can be used to predict the gender when only teeth of maxillary arch are available for forensic examination.

Preference for Fasciocutaneous Flap Over Musculocutaneous Flap as a First-Line Option for Ischial Pressure Wound Reconstruction: A Review of 64 Cases

2021 ◽  
pp. 153473462110387
Author(s):  
Jaehoon Choi ◽  
Kyubeom Kim ◽  
Junhyung Kim ◽  
Woonhyeok Jeong ◽  
Taehee Jo ◽  
...  
Keyword(s):  
Dead Space ◽  
Postoperative Bleeding ◽  
Significant Risk ◽  
Distal Portion ◽  
Complete Healing ◽  
Fasciocutaneous Flap ◽  
Musculocutaneous Flap ◽  
First Line ◽  
Fasciocutaneous Flaps ◽  
Significant Difference

The ischial pressure wound usually comprises a large, extensive defect and involves the repair of more than a small opening. Most surgeons have used a musculocutaneous flap to fill the large dead space of an ischial pressure wound. However, sacrificing muscle tissue has a potential risk of postoperative bleeding. The transferred muscle ultimately loses function as a cushion to absorb pressure. Conservation of muscle structures may be beneficial for use in future recurrence, which is common with ischial pressure wound. We compared the difference in outcome between musculocutaneous and fasciocutaneous flaps and analyzed factors affecting complications with the flaps in ischial pressure wound reconstruction. This study reviewed the results of 64 flaps in 44 patients with ischial wounds. The wounds were reconstructed with 34 musculocutaneous flaps (53%) and 30 fasciocutaneous flaps (47%). Twenty-three cases (36%) had complete healing, and 41 (64%) had complications. There was no significant difference in outcomes between fasciocutaneous and musculocutaneous flap groups. Crude logistic regression analysis showed no significant risk factors for occurrence of major complications. When fasciocutaneous flaps were used, the neighboring perforators and muscle tissues could be conserved. With a perforator-based fasciocutaneous flap, a de-epithelized distal portion of the flap could be used to fill the dead space. Therefore, the fasciocutaneous flap may have priority over the musculocutaneous flap as a first-line option for ischial pressure wound reconstruction.

A self-retaining nasal flowmeter for preterm infants

1980 ◽  
Vol 48 (3) ◽  
pp. 569-571 ◽  
Author(s):  
R. T. Brouillette ◽  
B. T. Thach
Keyword(s):  
Stainless Steel ◽  
Tidal Volume ◽  
Preterm Infants ◽  
Dead Space ◽  
Nasal Cannula ◽  
Light Weight ◽  
Low Resistance ◽  
Respiratory Airflow ◽  
The Subject ◽  
Compact Design

A nasal flowmeter suitable for preterm infants is described. It is made from a commercially available nasal cannula and 400-mesh stainless steel screen. Low dead space (0.35 ml) and low resistance (1.3 cmH2O . 100 ml-1 . s) are advantages. Light weight and compact design have eliminated the need for extensive restraint of the subject. Also, the investigator need not hold the flowmeter in place. These features make accurate measurement of respiratory airflow and tidal volume possible during polygraphic monitoring studies lasting several hours.

Sign in / Sign up

Export Citation Format

Share Document