scholarly journals Kinematic analysis of bimanual movements during food handling by head-fixed rats

2019 ◽  
Vol 121 (2) ◽  
pp. 490-499 ◽  
Author(s):  
Masakazu Igarashi ◽  
Jeff Wickens

Bimanual coordination, in which both hands work together to achieve a goal, is crucial for the basic needs of life, such as gathering and feeding. Such coordinated motor skill is highly developed in primates, where it has been most extensively studied. Rodents also exhibit remarkable dexterity and coordination of forelimbs during food handling and consumption. However, rodents have been less commonly used in the study of bimanual coordination because of limited quantitative measuring techniques. In this article we describe a high-resolution tracking system that enables kinematic analysis of rat forelimb movement. The system is used to quantify forelimb movements bilaterally in head-fixed rats during food handling and consumption. Forelimb movements occurring naturally during feeding were encoded as continuous three-dimensional trajectories. The trajectories were then automatically segmented and analyzed, using a novel algorithm, according to the laterality of movement speed or the asymmetry of movement direction across the forelimbs. Bilateral forelimb movements were frequently observed during spontaneous food handling. Both symmetry and asymmetry in movement direction were frequently observed, with symmetric bilateral movements quantitatively more common. The proposed method overcomes a limitation in the precise quantification of bimanual coordination in rodents. This enables the use of powerful rodent-based research tools such as optogenetics and chemogenetics in the further investigation of neural mechanisms of bimanual coordination. NEW & NOTEWORTHY We describe a new method for quantifying and classifying three-dimensional, bilateral forelimb trajectories in head-fixed rats. The method overcomes limits on quantifying bimanual coordination in rats. When applied to kinematic analysis of food handling behavior, continuous forelimb trajectories were automatically segmented and classified. Bilateral forelimb movements were observed more frequently than unilateral movements during spontaneous food handling. Both symmetry and asymmetry in movement direction were frequently observed. However, symmetric bilateral forelimb movements were more common.

2019 ◽  
Vol 31 (5) ◽  
pp. 657-670 ◽  
Author(s):  
Takafumi Matsumaru ◽  
◽  
Asyifa Imanda Septiana ◽  
Kazuki Horiuchi

In this paper, we introduce the three-dimensional aerial image interface, 3DAII. This interface reconstructs and aerially projects a three-dimensional object image, which can be simultaneously observed from various viewpoints or by multiple users with the naked eye. A pyramid reflector is used to reconstruct the object image, and a pair of parabolic mirrors is used to aerially project the image. A user can directly manipulate the three-dimensional object image by superimposing a user’s hand-finger or a rod on the image. A motion capture sensor detects the user’s hand-finger that manipulates the projected image, and the system immediately exhibits some reaction such as deformation, displacement, and discoloration of the object image, including sound effects. A performance test is executed to confirm the functions of 3DAII. The execution time of the end-tip positioning of a robotic arm has been compared among four operating devices: touchscreen, gamepad, joystick, and 3DAII. The results exhibit the advantages of 3DAII; we can directly instruct the movement direction and movement speed of the end-tip of the robotic arm, using the three-dimensional Euclidean vector outputs of 3DAII in which we can intuitively make the end-tip of the robotic arm move in three-dimensional space. Therefore, 3DAII would be one important alternative to an intuitive spatial user interface, e.g., an operation device of aerial robots, a center console of automobiles, and a 3D modelling system. A survey has been conducted to evaluate comfort and fatigue based on ISO/TS 9241-411 and ease of learning and satisfaction based on the USE questionnaire. We have identified several challenges related to visibility, workspace, and sensory feedback to users that we would like to address in the future.


2019 ◽  
Author(s):  
Masakazu Igarashi ◽  
Yumiko Akamine ◽  
Jeffery R Wickens

AbstractBimanual motor actions, such as threading a needle, require coordination of the movements of each hand according to the state of the other hand. By connecting homologous cortical regions between the two cerebral hemispheres, the corpus callosum is thought to play a key role in such bimanual coordination. However, direct experimental evidence of the contribution of the corpus callosum to natural behaviors requiring bimanual coordination, such as feeding, is lacking. We investigated the hypothesis that the corpus callosum mediates bimanual movements during food-handling behavior. We first traced the forelimb-related components of the motor corpus callosum in Long-Evans rats, and found that the callosal fiber bundle from the forelimb motor areas passes through the anterior part of the corpus callosum. We then confirmed by electrophysiological recordings that blocking the axonal conduction of fibers in the anterior corpus callosum reduced neural transmission between cortical forelimb areas. The causal role of corpus callosum in bimanual coordination was then tested by analyzing forelimb kinematics during object manipulation, before and after blocking axonal conduction in the anterior corpus callosum. We found the frequency of occurrence of symmetric bimanual movements was reduced by inhibition of anterior corpus callosum. In contrast, asymmetric bimanual movement was increased. Our findings suggest that the anterior corpus callosum coordinates the direction of bimanual movement.


Sensors ◽  
2021 ◽  
Vol 21 (8) ◽  
pp. 2670
Author(s):  
Thomas Quirin ◽  
Corentin Féry ◽  
Dorian Vogel ◽  
Céline Vergne ◽  
Mathieu Sarracanie ◽  
...  

This paper presents a tracking system using magnetometers, possibly integrable in a deep brain stimulation (DBS) electrode. DBS is a treatment for movement disorders where the position of the implant is of prime importance. Positioning challenges during the surgery could be addressed thanks to a magnetic tracking. The system proposed in this paper, complementary to existing procedures, has been designed to bridge preoperative clinical imaging with DBS surgery, allowing the surgeon to increase his/her control on the implantation trajectory. Here the magnetic source required for tracking consists of three coils, and is experimentally mapped. This mapping has been performed with an in-house three-dimensional magnetic camera. The system demonstrates how magnetometers integrated directly at the tip of a DBS electrode, might improve treatment by monitoring the position during and after the surgery. The three-dimensional operation without line of sight has been demonstrated using a reference obtained with magnetic resonance imaging (MRI) of a simplified brain model. We observed experimentally a mean absolute error of 1.35 mm and an Euclidean error of 3.07 mm. Several areas of improvement to target errors below 1 mm are also discussed.


2010 ◽  
Vol 154-155 ◽  
pp. 1481-1484 ◽  
Author(s):  
Jun Zhong Guo ◽  
Jun Ping Yang

The on-off pressure mechanism has an important function to the printing press, the quality of which concerns the working performance of the printing machine and the quality of printed products directly. In this paper, the pneumatic on-off pressure mechanism is discussed; the work demand of order on-off pressure is analyzed. In addition, the three-dimensional digital model and the kinematic analysis process can be achieved on the basis of ADAMS software. What’s more, the on pressure value in the process of on pressure is derived from the kinematic analysis. Lastly, the relation between the motion of on-off pressure mechanism and cylinder’s angular displacement is analyzed, an important basis to the on-off pressure mechanism’s optimal design will be provided.


2017 ◽  
Vol 14 (5) ◽  
pp. 172988141773275 ◽  
Author(s):  
Francisco J Perez-Grau ◽  
Fernando Caballero ◽  
Antidio Viguria ◽  
Anibal Ollero

This article presents an enhanced version of the Monte Carlo localization algorithm, commonly used for robot navigation in indoor environments, which is suitable for aerial robots moving in a three-dimentional environment and makes use of a combination of measurements from an Red,Green,Blue-Depth (RGB-D) sensor, distances to several radio-tags placed in the environment, and an inertial measurement unit. The approach is demonstrated with an unmanned aerial vehicle flying for 10 min indoors and validated with a very precise motion tracking system. The approach has been implemented using the robot operating system framework and works smoothly on a regular i7 computer, leaving plenty of computational capacity for other navigation tasks such as motion planning or control.


Motor Control ◽  
1998 ◽  
Vol 2 (3) ◽  
pp. 251-277 ◽  
Author(s):  
Howard Poizner ◽  
Olga I. Fookson ◽  
Michail B. Berkinblit ◽  
Wayne Hening ◽  
Gregory Feldman ◽  
...  

A three-dimensional tracking system was used to examine whether subjects with Parkinson's disease (PD) would show characteristic performance deficits in an unconstrained pointing task. Five targets were presented in a pyramidal array in space to 11 individuals with mild to moderate PD and 8 age-matched controls. After the target was indicated, subjects closed their eyes and pointed to the remembered target locations without vision. Despite the absence of visual feedback during movement, PD subjects were as accurate overall as controls. However, PD subjects showed greater variable errors, more irregular trajectories, and a vertical endpoint bias in which their endpoints were significantly lower than controls. They also showed deficiencies in the compensatory organization of joint rotations to ensure consistency in azimuthal (horizontal) positioning of the arm endpoint. We concluded that, under appropriate task conditions, PD subjects may not show overall deficits in accuracy even when making targeted movements at normal speed without visual feedback. Nevertheless, our findings indicate that there are certain dimensions of performance which are selectively altered in Parkinson's disease even when overall performance is normal.


2015 ◽  
Vol 54 (1) ◽  
pp. 106-116 ◽  
Author(s):  
Yu Wang ◽  
Hong-Qing Wang ◽  
Lei Han ◽  
Yin-Jing Lin ◽  
Yan Zhang

AbstractThis study was designed to provide basic information for the improvement of storm nowcasting. According to the mean direction deviation of storm movement, storms were classified into three types: 1) steady storms (S storms, extrapolated efficiently), 2) unsteady storms (U storms, extrapolated poorly), and 3) transitional storms (T storms). The U storms do not fit the linear extrapolation processes because of their unsteady movements. A 6-yr warm-season radar observation dataset was used to highlight and analyze the differences between U storms and S storms. The analysis included geometric features, dynamic factors, and environmental parameters. The results showed that storms with the following characteristics changed movement direction most easily in the Beijing–Tianjin region: 1) smaller storm area, 2) lower thickness (echo-top height minus base height), 3) lower movement speed, 4) weaker updrafts and the maximum value located in the mid- and upper troposphere, 5) storm-relative vertical wind profiles dominated by directional shear instead of speed shear, 6) lower relative humidity in the mid- and upper troposphere, and 7) higher surface evaporation and ground roughness.


2021 ◽  
Vol 7 (6) ◽  
pp. eabe3902
Author(s):  
Martin Rieu ◽  
Thibault Vieille ◽  
Gaël Radou ◽  
Raphaël Jeanneret ◽  
Nadia Ruiz-Gutierrez ◽  
...  

While crucial for force spectroscopists and microbiologists, three-dimensional (3D) particle tracking suffers from either poor precision, complex calibration, or the need of expensive hardware, preventing its massive adoption. We introduce a new technique, based on a simple piece of cardboard inserted in the objective focal plane, that enables simple 3D tracking of dilute microparticles while offering subnanometer frame-to-frame precision in all directions. Its linearity alleviates calibration procedures, while the interferometric pattern enhances precision. We illustrate its utility in single-molecule force spectroscopy and single-algae motility analysis. As with any technique based on back focal plane engineering, it may be directly embedded in a commercial objective, providing a means to convert any preexisting optical setup in a 3D tracking system. Thanks to its precision, its simplicity, and its versatility, we envision that the technique has the potential to enhance the spreading of high-precision and high-throughput 3D tracking.


2017 ◽  
Vol 6 (8) ◽  
pp. 514-521 ◽  
Author(s):  
N. Mannering ◽  
T. Young ◽  
T. Spelman ◽  
P. F. Choong

Sign in / Sign up

Export Citation Format

Share Document