scholarly journals Enhancement of Photocatalytic Activity of ZnO/SiO2by Nanosized Pt for Photocatalytic Degradation of Phenol in Wastewater

2012 ◽  
Vol 2012 ◽  
pp. 1-8 ◽  
Author(s):  
R. M. Mohamed ◽  
M. A. Barakat
Keyword(s):  
Photocatalytic Activity ◽  
Photocatalytic Degradation ◽  
Surface Area ◽  
Diffuse Reflectance Spectroscopy ◽  
Sol Gel ◽  
Phenol Degradation ◽  
Synthetic Wastewater ◽  
X Ray Diffraction ◽  
X Ray ◽  
Transmission Electron

ZnO- nanoparticles were synthesized by a sol-gel technique from and tetraethyl orthosilicate (TEOS). The synthesized samples were further modified by nanosized Pt from H2PtCl6solution through photoassisted deposition (PAD) and impregnation (Img) routes. The obtained samples were characterized by a series of techniques including X-ray diffraction (XRD), UV-Vis diffuse reflectance spectroscopy, N2adsorption, extended X-ray absorption fine structure (EXAFS), and transmission electron microscopy (TEM). The photocatalytic activity of the Pt-ZnO/ was evaluated by photocatalytic degradation of phenol in synthetic wastewater under UV-irradiation. Results obtained revealed that the surface area and the photocatalytic activity of the prepared samples were increased in the order ZnO/ < PAD: Pt-ZnO/ < img: Pt-ZnO/. The surface area decreased from 480 to 460 and 450 m2/g, while the efficiency of the phenol degradation increased from 80 to 85 and 100%, with the ZnO/, Img: Pt-ZnO-, and PAD: Pt-ZnO- samples, respectively.

scholarly journals Improved Visible Light Photocatalytic Activity for TiO2Nanomaterials by Codoping with Zinc and Sulfur

2015 ◽  
Vol 2015 ◽  
pp. 1-8 ◽  
Author(s):  
Qianzhi Xu ◽  
Xiuying Wang ◽  
Xiaoli Dong ◽  
Chun Ma ◽  
Xiufang Zhang ◽  
...  
Keyword(s):  
Photocatalytic Activity ◽  
Visible Light ◽  
Photoelectron Spectroscopy ◽  
Diffuse Reflectance Spectroscopy ◽  
Sol Gel ◽  
X Ray Diffraction ◽  
Sunlight Irradiation ◽  
X Ray ◽  
Transmission Electron ◽  
Photoinduced Charge

S/Zn codoped TiO2nanomaterials were synthesized by a sol-gel method. X-ray diffraction, UV-vis diffuse reflectance spectroscopy, transmission electron microscopy, photoluminescence spectroscopy, and X-ray photoelectron spectroscopy were used to characterize the morphology, structure, and optical properties of the prepared samples. The introduction of Zn and S resulted in significant red shift of absorption edge for TiO2-based nanomaterials. The photocatalytic activity was evaluated by degrading reactive brilliant red X-3B solution under simulated sunlight irradiation. The results showed S/Zn codoped TiO2exhibited higher photocatalytic activity than pure TiO2and commercial P25, due to the photosynergistic effect of obvious visible light absorption, efficient separation of photoinduced charge carriers, and large surface area. Moreover, the content of Zn and S in the composites played important roles in photocatalytic activity of TiO2-based nanomaterials.

Visible-Light-Induced Photocatalytic Activity of Boron-Doped BiVO4

2014 ◽  
Vol 809-810 ◽  
pp. 890-894
Author(s):  
Dan Li ◽  
Lian Wei Shan ◽  
Gui Lin Wang ◽  
Li Min Dong ◽  
Wei Li ◽  
...  
Keyword(s):  
Photocatalytic Activity ◽  
Visible Light ◽  
Diffuse Reflectance ◽  
Diffuse Reflectance Spectroscopy ◽  
Sol Gel ◽  
Reflectance Spectroscopy ◽  
Scheelite Structure ◽  
X Ray Diffraction ◽  
X Ray ◽  
Boron Doped

Boron-BiVO4 samples were synthesized by sol-gel method. They were characterized by UV-vis diffuse reflectance spectroscopy, X-ray diffraction. Photocatalytic activity of the obtained BiVO4 samples was investigated through degrading methylene blue (MB). The results reveal that boron-BiVO4 catalysts have monoclinic scheelite structure. The BiVO4 and Co-BiVO4 photocatalysts were responsive to visible light. Co-BiVO4 photocatalyst showed higher photocatalytic activity than pure BiVO4, resulting in the significantly improved efficiency of degradation of MB.

scholarly journals Hydrothermal Synthesis of Iodine-Doped Nanoplates with Enhanced Visible and Ultraviolet-Induced Photocatalytic Activities

2012 ◽  
Vol 2012 ◽  
pp. 1-12 ◽  
Author(s):  
Jiang Zhang ◽  
Zheng-Hong Huang ◽  
Yong Xu ◽  
Feiyu Kang
Keyword(s):  
Photocatalytic Activity ◽  
Photoelectron Spectroscopy ◽  
Oxygen Vacancies ◽  
Diffuse Reflectance Spectroscopy ◽  
Synergetic Effect ◽  
X Ray Diffraction ◽  
X Ray ◽  
Selected Area Electron Diffraction ◽  
Transmission Electron ◽  
Photocatalytic Activities

The iodine-doped Bi2WO6(I-BWO) photocatalyst was prepared via a hydrothermal method using potassium iodide as the source of iodine. The samples were characterized by X-ray diffraction (XRD), scanning electron microscope (SEM), transmission electron microscopy (TEM) and selected area electron diffraction (SAED), X-ray photoelectron spectroscopy (XPS), UV-vis diffuse reflectance spectroscopy (DRS), and photoluminescence (PL) spectroscopy. The photocatalytic activity of I-BWO for the degradation of rhodamine B (RhB) was higher than that of pure BWO and I2-BWO regardless of visible light (>420 nm) or ultraviolet light (<400 nm) irradiation. The results of DRS analysis showed that the I-BWO and I2-BWO catalysts had narrower band gaps. XPS analysis proved that the multivalent iodine species including I0and were coadsorbed on the defect surface of Bi2WO6in I-BWO. The enhanced PL intensity revealed that a large number of defects of oxygen vacancies were formed by the doping of iodine. The enhanced photocatalytic activity of I-BWO for degradation of RhB was caused by the synergetic effect of a small crystalline size, a narrow band gap, and plenty of oxygen vacancies.

Study of Heating Effect on Specific Surface Area, and Changing Optical Properties of ZnO Nanocrystals

2011 ◽  
Vol 403-408 ◽  
pp. 1205-1210
Author(s):  
Jaleh Babak ◽  
Ashrafi Ghazaleh ◽  
Gholami Nasim ◽  
Azizian Saeid ◽  
Golbedaghi Reza ◽  
...  
Keyword(s):  
Specific Surface ◽  
Surface Area ◽  
Specific Surface Area ◽  
Energy Gap ◽  
Sol Gel ◽  
X Ray Diffraction ◽  
X Ray ◽  
Zno Nanocrystals ◽  
Transmission Electron ◽  
Zno Nanocrystal

In this work ZnO nanocrystal powders have been synthesized by using Zinc acetate dehydrate as a precursor and sol-gel method. Then the products have been annealed at temperature of 200-1050°C, for 2 hours. The powders were characterized using X-ray diffraction (XRD), UV-vis absorption and photoluminescence (PL) spectroscopy. The morphology of refrence ZnO nanoparticles have been studied using Transmission Electron Microscope (TEM). During the annealing process, increase in nanocrystal size, defects and energy gap quantitative, and decrease in specific surface area have been observed.

scholarly journals Defective TiO2 Core-Shell Magnetic Photocatalyst Modified with Plasmonic Nanoparticles for Visible Light-Induced Photocatalytic Activity

Catalysts ◽  
2020 ◽  
Vol 10 (6) ◽  
pp. 672 ◽  
Author(s):  
Zuzanna Bielan ◽  
Agnieszka Sulowska ◽  
Szymon Dudziak ◽  
Katarzyna Siuzdak ◽  
Jacek Ryl ◽  
...  
Keyword(s):  
Photocatalytic Activity ◽  
Photoelectron Spectroscopy ◽  
Diffuse Reflectance Spectroscopy ◽  
Phenol Degradation ◽  
Magnetic Core ◽  
Magnetic Photocatalyst ◽  
X Ray ◽  
Transmission Electron ◽  
First Time

In the presented work, for the first time, the metal-modified defective titanium(IV) oxide nanoparticles with well-defined titanium vacancies, was successfully obtained. Introducing platinum and copper nanoparticles (NPs) as surface modifiers of defective d-TiO2 significantly increased the photocatalytic activity in both UV-Vis and Vis light ranges. Moreover, metal NPs deposition on the magnetic core allowed for the effective separation and reuse of the nanometer-sized photocatalyst from the suspension after the treatment process. The obtained Fe3O4@SiO2/d-TiO2-Pt/Cu photocatalysts were characterized by X-ray diffractometry (XRD) and specific surface area (BET) measurements, UV-Vis diffuse reflectance spectroscopy (DR-UV/Vis), X-ray photoelectron spectroscopy (XPS) and transmission electron microscopy (TEM). Further, the mechanism of phenol degradation and the role of four oxidative species (h+, e−, •OH, and •O2−) in the studied photocatalytic process were investigated.

scholarly journals Zirconia nanoparticle-modified graphitic carbon nitride nanosheets for effective photocatalytic degradation of 4-nitrophenol in water

2019 ◽  
Vol 9 (8) ◽  
Author(s):  
Mohanna Zarei ◽  
Jamil Bahrami ◽  
Mohammad Zarei
Keyword(s):  
Photocatalytic Activity ◽  
Photocatalytic Degradation ◽  
Carbon Nitride ◽  
Diffuse Reflectance Spectroscopy ◽  
Graphitic Carbon ◽  
Graphitic Carbon Nitride ◽  
X Ray Diffraction ◽  
X Ray ◽  
Zirconia Nanoparticle ◽  
Carbon Nitride Nanosheets

Abstract Zirconia (ZrO2)-modified graphitic carbon nitride (g-C3N4) nanocomposite was used for effective photodegradation of 4-nitrophenol (4-NP) in water. The ZrO2 nanoparticles, g-C3N4 nanosheets, and ZrO2/g-C3N4 nanocomposite were well characterized by including N2 adsorption, X-ray diffraction, Fourier transform infrared spectroscopy, field emission scanning electron microscopy, UV–Vis diffuse reflectance spectroscopy, photoelectrochemical measurements, and photoluminescence spectroscopy methods. ZrO2/g-C3N4 nanocomposites were formed at room temperature using sonication and used for effective for photodegradation of 4-NP under irradiation with visible light. The nanocomposite samples resulted in a significant increase in photocatalytic activity compared with single-component samples of g-C3N4. In particular, the ZrO2/g-C3N4 nanocomposite exhibited the significant increase in the photocatalytic activity. The ZrO2/g-C3N4 nanocomposite showed an excellent catalytic activity toward the reduction of 4-NP in aqueous medium. Further, ZrO2/g-C3N4 nanocomposite can be reused several times for photocatalytic degradation as well as for 4-NP adsorption.

Effect of Rb+ -Doping on the Crystallization, Phase Transition and Photocatalytic Activity of Nanosized TiO2 Catalyst

2012 ◽  
Vol 476-478 ◽  
pp. 954-957 ◽  
Author(s):  
Zhao Hui Ni ◽  
Xiao Li Kou ◽  
Xin Yu Ding ◽  
Cun Wang Ge ◽  
Xiao Hui Jing
Keyword(s):  
Photocatalytic Activity ◽  
Methyl Orange ◽  
Surface Area ◽  
Sol Gel ◽  
Rutile Phase ◽  
Bet Surface Area ◽  
X Rays ◽  
X Ray Diffraction ◽  
Transmission Electron ◽  
Kinetics Of

In order to study the ion effect on titania phase structure, crystallite size, and photocatalytic activity, Rb+-doped TiO2 nanoparticles were prepared via a modified sol-gel method and characterized by means of X-ray diffraction, Energy Dispersive X-rays spectroscopy and transmission electron microscopy. The photocatalytic activity of the elaborated powders was studied following the degradation of methyl orange. The results indicate that doping Rb+ increases the BET surface area of TiO2 crystals, decreases the crystal size, reduces the diminishing rates of surface area with increasing calcinations temperature, raises the temperature at which anatase changes into rutile phase, and so significantly increases the photocatalytic activity of TiO2. The kinetics of the methyl orange degradation fits Langmuir-Hinshelwood kinetics model well.

scholarly journals Preparation and photocatalytic activity of the layered titanates

2010 ◽  
Vol 4 (2) ◽  
pp. 69-73 ◽  
Author(s):  
Marija Milanovic ◽  
Ivan Stijepovic ◽  
Ljubica Nikolic
Keyword(s):  
Photocatalytic Activity ◽  
Specific Surface ◽  
Surface Area ◽  
Specific Surface Area ◽  
High Photocatalytic Activity ◽  
X Ray Diffraction ◽  
X Ray ◽  
Transmission Electron ◽  
Bet Method ◽  
Ft Ir

Titanate structures were synthesized in highly alkaline solution using hydrothermal procedure. As-prepared powders were characterized by X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR) and transmission electron microscopy (TEM). A specific surface area of the powders was measured by BET method. Results confirmed formation of layered trititanates, already after one hour of hydrothermal synthesis. To examine the photocatalytic activity of the as-prepared layered titanates, methylene blue (MB) was employed as a target compound in response to visible light at ambient temperature. It was observed that the specific surface area, size distribution and crystallinity are important factors to get high photocatalytic activity for the decomposition of MB. .

scholarly journals Preparation and Photocatalytic Activity of TiO2/Fine Char for Removal of Rhodamine B

2015 ◽  
Vol 2015 ◽  
pp. 1-5 ◽  
Author(s):  
Mingjie Ma ◽  
Weijie Guo ◽  
Zhengpeng Yang ◽  
Shanxiu Huang ◽  
Guanyu Wang
Keyword(s):  
Photocatalytic Activity ◽  
Photocatalytic Degradation ◽  
Rhodamine B ◽  
Uv Light ◽  
Sol Gel ◽  
Tetrabutyl Titanate ◽  
Light Illumination ◽  
X Ray Diffraction ◽  
X Ray ◽  
Uv Light Irradiation

TiO2/fine char (FC) photocatalyst was prepared via sol-gel method with tetrabutyl titanate as the precursor and FC as the carrier. The structural property of TiO2/FC photocatalyst was investigated by X-ray diffraction (XRD) and scanning electron microscopy (SEM), and the photocatalytic activity of TiO2/FC was evaluated by photocatalytic degradation of rhodamine B (RhB) aqueous solution under UV light irradiation. The results showed that TiO2was successfully coated on the surface of FC, and the TiO2/FC photocatalyst had better photocatalytic efficiency and stability for degradation of RhB under UV light illumination as compared to that of the pure TiO2and FC. The study provided a novel way for the application of FC to the photocatalytic degradation of organic wastes.

scholarly journals Photocatalytic Activity of Nickel Doped CoO Nanocomposite for the Degradation of Azure A Dye

2020 ◽  
Vol 33 (1) ◽  
pp. 240-244
Author(s):  
Nirmal Singh ◽  
Avinash Kumar Rai ◽  
Ritu Vyas ◽  
Rameshwar Ameta
Keyword(s):  
Electron Microscopy ◽  
Photocatalytic Activity ◽  
Degradation Rate ◽  
Dye Degradation ◽  
Sol Gel ◽  
X Ray Diffraction ◽  
X Ray ◽  
Azure A ◽  
Transmission Electron ◽  
Working Parameters

Nanocrystalline cobalt(II) oxide doped with nickel was prepared using the sol-gel method and employed as a photocatalyst for azure A dye degradation under visible light. The prepared photocatalyst was analyzed using energy-dispersive X-ray (EDX) spectroscopy, field emission scanning electron microscopy (FESEM), Fourier-transform infrared (FTIR), X-ray diffraction (XRD) and high-resolution transmission electron microscopy (HRTEM) techniques. The photocatalytic activity of Ni-doped CoO under different working parameters, like concentration, pH, dosage (Ni-doped and undoped CoO), light intensity for the degradation of azure A dye was also optimzed. It was observed that the dye degradation rate improved after doping. Approximately 76% and 85% of azure A dye was degraded within 90 min through undoped and Ni-doped CoO, respectively.

Sign in / Sign up

Export Citation Format

Share Document