scholarly journals Development of Oral Sustained Release Rifampicin Loaded Chitosan Nanoparticles by Design of Experiment

2013 ◽  
Vol 2013 ◽  
pp. 1-10 ◽  
Author(s):  
Bhavin K. Patel ◽  
Rajesh H. Parikh ◽  
Pooja S. Aboti
Keyword(s):  
Particle Size ◽  
Drug Release ◽  
Sustained Release ◽  
Design Of Experiment ◽  
Drug Loading ◽  
Chitosan Nanoparticles ◽  
In Vitro Release ◽  
Entrapment Efficiency ◽  
Release Kinetic

Objective. The main objective of the present investigation was to develop and optimize oral sustained release Chitosan nanoparticles (CNs) of rifampicin by design of experiment (DOE). Methodology. CNs were prepared by modified emulsion ionic gelation technique. Here, inclusion of hydrophobic drug moiety in the hydrophilic matrix of polymer is applied for rifampicin delivery using CN. The 23 full-factorial design was employed by selecting the independent variables such as Chitosan concentration (X1), concentration of tripolyphosphate (X2), and homogenization speed (X3) in order to achieve desired particle size with maximum percent entrapment efficiency and drug loading. The design was validated by checkpoint analysis, and formulation was optimized using the desirability function. Results. Particle size, drug entrapment efficiency, and drug loading for the optimized batch were found to be 221.9 nm, 44.17 ± 1.98% W/W, and 42.96 ± 2.91% W/W, respectively. In vitro release data of optimized formulation showed an initial burst followed by slow sustained drug release. Kinetic drug release from CNs was best fitted to Higuchi model. Conclusion. Design of Experiment is an important tool for obtaining desired characteristics of rifampicin loaded CNs. In vitro study suggests that oral sustained release CNs might be an effective drug delivery system for tuberculosis.

scholarly journals FORMULATION AND EVALUATION OF ALLOPURINOL LOADED CHITOSAN NANOPARTICLES

2019 ◽  
pp. 49-52 ◽  
Author(s):  
Gurpreet Kandav ◽  
D.c. Bhatt ◽  
Deepak Kumar Jindal
Keyword(s):  
Particle Size ◽  
Drug Release ◽  
Sustained Release ◽  
Release Kinetics ◽  
Chitosan Nanoparticles ◽  
In Vitro Release ◽  
Entrapment Efficiency ◽  
Polydispersity Index ◽  
Sustained Release Formulation

Objective: The objective of the present investigation was to fabricate and characterize allopurinol loaded chitosan nanoparticles (A-CNPs) for sustained release of drug. Methods: The allopurinol loaded chitosan nanoparticles were successfully prepared by employing the ionotropic gelation method. Further, particle size (PS), polydispersity index (PDI), zeta potential (ZP), Differential Scanning Calorimetry (DSC), entrapment efficiency (EE), Transmission Electron Microscopy (TEM), in vitro drug release, X-Ray Diffraction (XRD) and Fourier transform infrared (FTIR) were used for evaluating formulated A-CNPs Results: A-CNPs was successfully prepared and the particle size, polydispersity index, ZP and entrapment efficiency were found to be 375.3±10.1 nm, 0.362±0.01 and 32.5±2.7 mV and 52.56±0.10% respectively. In vitro release profile of A-CNPs showed sustained release and Higuchi model was found to be best fit for drug release kinetics. FTIR study depicted no chemical interaction between pure drug allopurinol (AL) and other excipients. Conclusion: The sustained release formulation of allopurinol was successfully prepared using HMW chitosan and evaluated for different parameters.

scholarly journals DEVELOPMENT, CHARACTERIZATION AND IN VITRO RELEASE KINETIC STUDIES OF IBANDRONATE LOADED CHITOSAN NANOPARTICLES FOR EFFECTIVE MANAGEMENT OF OSTEOPOROSIS

2021 ◽  
pp. 120-125
Author(s):  
S. PATHAK ◽  
S. P. VYAS ◽  
A. PANDEY
Keyword(s):  
Electron Microscopy ◽  
Particle Size ◽  
Sodium Tripolyphosphate ◽  
Release Kinetics ◽  
Ph Effect ◽  
Chitosan Nanoparticles ◽  
In Vitro Release ◽  
Entrapment Efficiency ◽  
Release Kinetic

Objective: The objective of the present study was to develop, optimize, and evaluate Ibandronate-sodium loaded chitosan nanoparticles (Ib-CS NPs) to treat osteoporosis. Methods: NPs were prepared by the Ionic gelation method and optimized for various parameters such as the effect of concentration of chitosan, sodium tripolyphosphate (TPP), and pH effect on particle size polydispersity index (PDI), zeta potential, and entrapment efficiency. The prepared nanoparticles were characterized using particle size analyzer (DLS), transmission electron microscopy (TEM), scanning electron microscopy (SEM), and Fourier-Transform Infrared spectroscopy (FTIR).  Results: Formulated NPs were obtained in the average nano size in the range below 200 nm in TEM, SEM, and DLS studies. The particle size and encapsulation efficiency of the optimized formulation were 176.1 nm and 63.28%, respectively. The release profile of NPs was depended on the dissolution medium and followed the First-order release kinetics. Conclusion: Bisphosphonates are the most commonly prescribed drugs for treating osteoporosis in the US and many other countries, including India. Ibandronate is a widely used anti-osteoporosis drug, exhibits a strong inhibitory effect on bone resorption performed by osteoclast cells. Our results indicated that Ibandronate sodium-loaded chitosan nanoparticles provide an effective medication for the treatment of osteoporosis.

scholarly journals A NOVEL NANOGEL FORMULATION OF FINASTERIDE FOR TOPICAL TREATMENT OF ANDROGENETIC ALOPECIA: DESIGN, CHARACTERIZATION AND IN VITRO EVALUATION

2021 ◽  
pp. 228-240
Author(s):  
DIVYA SANGANABHATLA ◽  
R. SHYAM SUNDER
Keyword(s):  
Particle Size ◽  
Drug Release ◽  
Drug Loading ◽  
In Vitro Release ◽  
Entrapment Efficiency ◽  
Androgenetic Alopecia ◽  
Stability Studies ◽  
Drug Content ◽  
Release Study

Objective: The present paper describes the development and evaluation of a Novel Finasteride (FSD) nanogel topical delivery for the treatment of Androgenetic Alopecia. Nano-based topical formulation was chosen to enhance the solubility, permeability, biocompatibility of drug and to overcome the problems associated with the oral delivery of finasteride. Methods: Various trails batches were prepared by using probe sonication method. Based on stability studies and particle size, NP4 trail was optimized which exhibited a spherical shape with a mean diameter of 113.80±0.72, the polydispersity of 0.28±0.01, zeta potential of-25.2 mV, drug entrapment efficiency of 92.67±0.47 %, and drug loading of 6.15±0.02 %. Storage stability studies demonstrated that the particle size and entrapment efficiency were not changed during 3 mo both at 4 °C and room temperature. Finasteride (FSD) NLCs were characterized for particle size by scanning electron microscope (SEM), chemical state by X-Ray diffraction (XRD), physical stability by centrifugation and thermodynamic stability by Freeze-thaw method. These prepared nanoparticles were transformed into topical nanogel and further evaluated. Results: Among the different trails, C2 trail of NLC gel has shown excellent gelling capacity, clear appearance, good viscosity characteristics and was selected for further evaluation studies. Batches of topical nanogel were characterized through pH, homogeneity, spreadability, viscosity, drug content and in vitro drug release study. Based on pH (6.5-6.8), drug content (91.25±0.9%), spreadability (6.7 cm/sec), C2 batch was subjected to In vitro skin occlusivity study, in-vitro release study and In vitro heamolysis study. Conclusion: The percent cumulative drug release for Finasteride (FSD) gel was found to be 758.52±1.49 µg at 24 h which is quite higher than plain gel and Finasteride (FSD) gel showed maximum occlusiveness and excellent spreadability and found to be stable. In conclusion, prepared Finasteride (FSD) Nanogel could be used with promising potential for the treatment of Androgenetic Alopecia.

scholarly journals Formulation Development and Optimization of Sustained Release Microspheres of Acebrophylline

2021 ◽  
pp. 13-28
Author(s):  
Niyati Shah ◽  
Ayesha Sheikh ◽  
Hitesh Jain
Keyword(s):  
Drug Release ◽  
Sustained Release ◽  
In Vitro Release ◽  
Entrapment Efficiency ◽  
Stability Study ◽  
Release Kinetic ◽  
Vitro Release ◽  
Polymer Ratio ◽  
Sustained Release Microspheres

Objectives: Aim of present work is to prepare and evaluate Sustained release microspheres of Acebrophylline for treatment of Asthma. Experimental work: In present investigation, attempt was made to prepare sustained release microspheres of Acebrophylline with different polymer ratio using Ionic gelation method. Drug- excipient compatibility studies were performed by FTIR. The best suited Microspheres formulation was found on the basis production yield, entrapment efficiency and in vitro release study. Optimized batch of microspheres (B2) was characterized for FTIR, DSC, and SEM analysis. The drug release data of optimized batch was fitted into different release kinetic models. The optimized batch of microspheres (B2) was subjected for the short term stability study at 40 ± 2°C with RH of 75% for a period of 1 month. Results and discussion: There was no interaction found between drug and excipients. Sodium alginate (2%) concentration, Eudragit RS-100 (1:2) ratio gave highest sustainable property and CaCl2 (2.5%) concentration had a good cross linking property. This observation done on the basis of production yield, entrapment efficiency and In vitro release study. The Microspheres prepared from Ionic gelation method had Drug : Eudragit RS100 (1:2), 2 % Sodium alginate and 2.5 % CaCl2 (B2) give 99.2 % drug release over the periods of 12 hr. The drug release from optimized microspheres formulation (B2) follows first order release kinetic. DSC study showed the melting behavior of drug present into microspheres. SEM studies showed that optimized microspheres were spherical and rough surface.  Stability study proved that optimized formulation (B2) was stable. Conclusion:  Drug: Polymer ratio and Volume of CaCl2 had significant effect on % Entrapment efficiency and Drug release. From the Scanning Electron Microscopy (SEM) study observed that microspheres was spherical and rough surface. Non Fickian diffusion was the mode of drug release from Acebrophylline- loaded microspheres. After stability study no physical changes & almost same drug release was observed in microspheres. Hence, the formulation B2 was stable.

Formulation and Evaluation of Mefloquine Hydrochloride Nanoparticles

2014 ◽  
Vol 7 (1) ◽  
pp. 2377-2386
Author(s):  
Dilip Kumar Gupta ◽  
B K Razdan ◽  
Meenakshi Bajpai
Keyword(s):  
Particle Size ◽  
Sustained Release ◽  
In Vitro Release ◽  
Entrapment Efficiency ◽  
Taste Masking ◽  
Diffusion Method ◽  
Drug Entrapment Efficiency ◽  
Resistant Strains ◽  
Vitro Release

The present study deals with the formulation and evaluation of mefloquine hydrochloride nanoparticles. Mefloquine is a blood schizonticidal quinoline compound, which is indicated for the treatment of mild-to-moderate acute malarial infections caused by mefloquine-susceptible multi-resistant strains of P. falciparum and P. vivax. The purpose of the present work is to minimize the dosing frequency, taste masking toxicity and to improve the therapeutic efficacy by formulating mefloquine HCl nanoparticles. Mefloquine nanoparticles were formulated by emulsion diffusion method using polymer poly(ε-caprolactone) with six different formulations. Nanoparticles were characterized by determining its particle size, polydispersity index, drug entrapment efficiency, drug content, particle morphological character and drug release. The particle size ranged between 100 nm to 240 nm. Drug entrapment efficacy was >95%. The in-vitro release of nanoparticles were carried out which exhibited a sustained release of mefloquine HCl from nanoparticles up to 24 hrs. The results showed that nanoparticles can be a promising drug delivery system for sustained release of mefloquine HCl.

Solid Lipid Nanoparticles for Topical Delivery of Acitretin for the Treatment of Psoriasis by Design of Experiment

2020 ◽  
Vol 12 (2) ◽  
pp. 4474-4491
Author(s):  
Rajkumar Aland ◽  
Ganesan M ◽  
P. Rajeswara Rao ◽  
Bhikshapathi D. V. R. N.
Keyword(s):  
Particle Size ◽  
Drug Release ◽  
Solid Lipid Nanoparticles ◽  
Drug Loading ◽  
Entrapment Efficiency ◽  
Lipid Nanoparticles ◽  
Tem Analysis ◽  
In Vitro Drug Release ◽  
Solid Lipid

The main objective for this investigation is to develop and optimize the solid lipid nanoparticles formulation of acitretin for the effective drug delivery. Acitretin loaded SLNs were prepared by hot homogenization followed by the ultrasonication using Taguchi’s orthogonal array with eight parameters that could affect the particle size and entrapment efficiency. Based on the results from the analyses of the responses obtained from Taguchi design, three different independent variables including surfactant concentration (%), lipid to drug ratio (w/w) and sonication time (s) were selected for further investigation using central composite design. The  lipid Dynasan-116, surfactant poloxomer-188 and co surfactant egg lecithin resulted in better percent drug loading and evaluated for particle size, zeta potential, drug entrapment efficiency, in vitro drug release and stability. All parameters were found to be in an acceptable range. TEM analysis has demonstrated the presence of individual nanoparticles in spherical shape and the results were compatible with particle size measurements.  In vitro drug release of optimized SLN formulation (F2) was found to be 95.63 ± 1.52%, whereas pure drug release was 30.12 after 60 min and the major mechanism of drug release follows first order kinetics release data for optimized formulation (F2) with non-Fickian (anomalous) with a strong correlation coefficient (R2 = 0.94572) of Korsemeyer-Peppas model. The total drug content of acitretin gel formulation was found to 99.86 ± 0.012% and the diameter of gel formulation was 6.9 ± 0.021 cm and that of marketed gel was found to be 5.7 ± 0.06 cm, indicating better spreadability of SLN based gel formulation. The viscosity of gel formulation at 5 rpm was found to be 6.1 x 103 ± 0.4 x 103 cp. The release rate (flux) of acitretin across the membrane and excised skin differs significantly, which indicates about the barrier properties of skin. The flux value for SLN based gel formulation (182.754 ± 3.126 μg cm−2 h−1) was found to be higher than that for marketed gel (122.345 ± 4.786 μg cm−2 h−1). The higher flux and Kp values of SLN based gel suggest that it might be able to enter the skin easily as compared with marketed gel with an advantage of low interfacial tension of the emulsifier film that ensures an excellent contact to the skin. This topically oriented SLN based gel formulation could be useful in providing site-specific dermal treatment of psoriasis

Preparation, evaluation, and in vitro release of chitosan-alginate tanshinone self-microemulsifying sustained-release microcapsules

2020 ◽  
pp. 1-9
Author(s):  
Yunhong Wang ◽  
Rong Hu ◽  
Yanlei Guo ◽  
Weihan Qin ◽  
Xiaomei Zhang ◽  
...  
Keyword(s):  
Drug Release ◽  
Sustained Release ◽  
Release Rate ◽  
Orthogonal Design ◽  
Drug Loading ◽  
In Vitro Release ◽  
Core Material ◽  
Evaluation Indexes ◽  
Vitro Release

OBJECTIVE: In this study we explore the method to prepare tanshinone self-microemulsifying sustained-release microcapsules using tanshinone self-microemulsion as the core material, and chitosan and alginate as capsule materials. METHODS: The optimal preparation technology of chitosan-alginate tanshinone self-microemulsifying sustained-release microcapsules was determined by using the orthogonal design experiment and single-factor analysis. The drug loading and entrapment rate were used as evaluation indexes to assess the quality of the drug, and the in vitro release rate was used to evaluate the drug release performance. RESULTS: The best technology of chitosan-alginate tanshinone self-microemulsifying sustained-release microcapsules is as follows: the concentration of alginate is 1.5%, the ratio of tanshinone self-microemulsion volume to alginate volume to chitosan mass is 1:1:0.5 (ml: ml: g), and the best concentration of calcium chloride is 2.0%. To prepare the microcapsules using this technology, the drug loading will be 0.046%, the entrapment rate will be 80.23%, and the 24-hour in vitro cumulative release rate will be 97.4%. CONCLUSION: The release of the microcapsules conforms to the Higuchi equation and the first-order drug release model and has a good sustained-release performance.

scholarly journals FORMULATION, OPTIMIZATION AND IN VITRO EVALUATION OF 5-FLUOROURACIL LOADED LIQUORICE CRUDE PROTEIN NANOPARTICLES FOR SUSTAINED DRUG DELIVERY USING BOX-BEHNKEN DESIGN

2021 ◽  
pp. 216-226
Author(s):  
GEETHA V. S. ◽  
MALARKODI VELRAJ
Keyword(s):  
Drug Delivery ◽  
Particle Size ◽  
Drug Release ◽  
Crude Protein ◽  
Drug Loading ◽  
Entrapment Efficiency ◽  
Box Behnken Design ◽  
Sustained Drug Delivery ◽  
Drug Loading Efficiency

Objective: To formulate, optimize and evaluate 5-fluorouracil loaded liquorice crude protein nanoparticles for sustained drug delivery using Box-Behnken design. Methods: 5-fluorouracil (5-FU) loaded liquorice crude protein (LCP) nanoparticles were prepared by desolvation method using ethanol-water (1:2 ratio), Tween-80 (2%v/v) as stabilizing agent and gluteraldehyde (8% v/v) as cross linking agent. The optimization of prepared nanoparticles was carried out using Box-Behnken design with 3 factors 2 levels and 3 responses. The independent variables were A)5-FU concentration B)LCP concentration and C) sonication time while the responses were R1) Drug entrapment efficiency R2) Drug loading efficiency and R3) Particle size. The correlation between factors and responses were studied through response surface plots and mathematical equations. The nanoparticles were evaluated for FTIR, physicochemical properties like particle size and zeta potential by Photon correlation spectroscopy (PCS) and surface morphology by TEM. The entrapment efficiency, drug loading efficiency and in vitro drug release studies in PBS pH 7.4 (24 h) were carried out. The observed values were found to be in close agreement with the predicted value obtained from the optimization process. Results: 5-fluorouracil loaded LCP nanoparticles were prepared by desolvation method, the optimization was carried out by Box-Behnken design and the final formulation was evaluated for particle size (301.1 nm), zeta-potential (-25.8mV), PDI(0.226), with entrapment efficiency (64.07%), drug loading efficiency (28.54%), in vitro drug release (65.2% in 24 h) respectively. The formulated nanoparticles show Higuchi model drug release kinetics with sustained drug delivery for 24 h in pH7.4 buffer. Conclusion: The results were proved to be the most valuable for the sustained delivery of 5-Fluorouracil using liquorice crude protein as carrier. 5-FU–LCP nanoparticles were prepared using Tween-80 as stabilizing agent and gluteraldehyde as cross-linking agent to possess ideal sustained drug release characteristics.

scholarly journals FORMULATION AND EVALUATION OF MUCOADHESIVE MICROSPHERES OF AN ANTI-MIGRAINE DRUG

2018 ◽  
Vol 8 (5) ◽  
pp. 465-474
Author(s):  
S PADMA PRIYA ◽  
AN Rajalakshmi ◽  
P Ilaveni
Keyword(s):  
Drug Release ◽  
Sustained Release ◽  
Sodium Alginate ◽  
Release Kinetics ◽  
Drug Loading ◽  
Research Work ◽  
Entrapment Efficiency ◽  
Polyvinyl Pyrrolidone ◽  
Anti Migraine Drug

Objective: The objective of this research work is to develop and evaluate mucoadhesive microspheres of an anti-migraine drug for sustained release. Materials and Methods:  Mucoadhesive microspheres were prepared by emulsification method using Sodium alginate (SA), polyvinyl pyrrolidone (PVP) and Chitosan in the various drug-polymer ratios of 1:1, 1:2 and 1:3. Nine  formulations were formulated and  evaluated for  possible drug polymer interactions, percentage yield, micromeritic properties, particle size, drug content, drug entrapment efficiency, drug loading, swelling index, In-vitro wash off test, in vitro  drug release, surface morphology and release kinetics. Results: The results showed that no significant drug polymer interaction in FTIR studies. Among all the formulations SF3 containing sodium alginate showed 77.18% drug release in 6hrs. Conclusion: Amongst the developed mucoadhesive microspheres, SF3 formulation containing sodium alginate exhibited slow and sustained release in a controlled manner and it is a promising formulation for sustained release of Sumatriptan succinate. Keywords: Mucoadhesive microspheres, Sodium alginate, polyvinyl pyrrolidone, Chitosan, sustained release.

scholarly journals BIODEGRADABLE POLYMER: A NOVEL PHARMACEUTICAL CARRIER FOR SUSTAINED RELEASE OF METRONIDAZOLE

2017 ◽  
Vol 10 (10) ◽  
pp. 136
Author(s):  
Gayathri Hariharan ◽  
Priyanka Sinha
Keyword(s):  
Particle Size ◽  
Drug Release ◽  
Sustained Release ◽  
Biodegradable Polymer ◽  
Drug Loading ◽  
Cross Linking ◽  
Loading Capacity ◽  
Flow Properties ◽  
Chitosan Microspheres

Objective: To optimize and evaluate the formulation of metronidazole (MT)-loaded chitosan microspheres and to investigate the efficiency of biodegradable polymer in developing sustained release formulation of MT to prolong the action of drug.Methods: MT microspheres were prepared using emulsion cross-linking method. Polymer-drug compatibility study was done using Fourier transform infrared. Physical characteristics were evaluated by particle size,SEM, flow properties etc. In vitro studies for evaluating drug release for MT-loaded chitosan microspheres were done by dissolution study.Results: Particle size of the formulated microspheres was found to be within the range of 110-130 μm. Flow properties of F1-F7 such as angle of repose, bulk density, and tapped density were found to be within limits. Drug entrapment efficiency was found to be better for all the formulations within the range of 74.82-84.32% w/w. Drug loading capacity was found to be in the range of 56-83.2% w/v. In vitro drug release was found to be in the range of 81.32-96.23% w/v.Conclusion: In spite of all the above results, we conclude that F5 formulation was optimized depending on the data obtained from the drug loading capacity and percentage drug release studies. F5 formulation is formulated with drug-polymer ratio 1:2 with 1% of di octyl sodium sulfo succinate and 8 ml of glutaraldehyde as a cross-linking agent.

Sign in / Sign up

Export Citation Format

Share Document