scholarly journals Preparation of Biodegradable Silk Fibroin/Alginate Blend Films for Controlled Release of Antimicrobial Drugs

2013 ◽  
Vol 2013 ◽  
pp. 1-6 ◽  
Author(s):  
Yaowalak Srisuwan ◽  
Yodthong Baimark
Keyword(s):  
Controlled Release ◽  
Drug Release ◽  
Silk Fibroin ◽  
Water Soluble ◽  
Drug Release Profile ◽  
Sem Images ◽  
Blend Ratio ◽  
Blend Films ◽  
Vis Spectroscopy

Silk fibroin (SF)/alginate blend films have been prepared for controlled release of tetracycline hydrochloride, an antimicrobial model drug. The blend films were analysed by Fourier transform infrared (FTIR) spectroscopy, scanning electron microscopy (SEM), and UV-vis spectroscopy. The functional groups of the SF/alginate blends were monitored from their FTIR spectra. The homogeneity of the blend films was observed from SEM images. The dissolution and film transparency of the blend films depended on the SF/alginate blend ratio. Thein vitrodrug release profile of the blend films was determined by plotting the cumulative drug release versus time. It was found that the drug release significantly decreased as the SF/alginate blend ratio increased. The results demonstrated that the SF/alginate blend films should be a useful controlled-release delivery system for water-soluble drugs.

Formulation Development and Characterization of controlled release core in cup matrix tablets of venlafaxine HCl

2020 ◽  
Vol 15 ◽  
Author(s):  
Balaji Maddiboyina ◽  
Vikas Jhawat ◽  
Gandhi Sivaraman ◽  
Om Prakash Sunnapu ◽  
Ramya Krishna Nakkala ◽  
...  
Keyword(s):  
Controlled Release ◽  
Drug Release ◽  
Release Rate ◽  
Zero Order ◽  
Water Soluble ◽  
Matrix Tablets ◽  
Drug Dissolution ◽  
Crystalline Cellulose ◽  
Hydrophobic Polymers

Background: Venlafaxine HCl is a selective serotonin reuptake inhibitor which is given in the treatment of depression. The delivery of the drug at a controlled rate can be of great importance for prolonged effect. Objective: The objective was to prepare and optimize the controlled release core in cup matrix tablet of venlafaxine HCl using the combination of hydrophilic and hydrophobic polymers to prolong the effect with rate controlled drug release. Methods: The controlled release core in cup matrix tablets of venlafaxine HCl were prepared using HPMC K5, K4, K15, HCO, IPA, aerosol, magnesium sterate, hydrogenated castor oil and micro crystalline cellulose PVOK-900 using wet granulation technique. Total ten formulations with varying concentrations of polymers were prepared and evaluated for different physicochemical parameters such FTIR analysis for drug identification, In-vitro drug dissolution study was performed to evaluate the amount of drug release in 24 hrs, drug release kinetics study was performed to fit the data in zero order, first order, Hixson–crowell and Higuchi equation to determine the mechanism of drug release and stability studies for 3 months as observed. Results: The results of hardness, thickness, weight variation, friability and drug content study were in acceptable range for all formulations. Based on the In vitro dissolution profile, formulation F-9 was considered to be the optimized extending the release of 98.32% of drug up to 24 hrs. The data fitting study showed that the optimized formulation followed the zero order release rate kinetics and also compared with innovator product (flavix XR) showed better drug release profile. Conclusion: The core-in-cup technology has a potential to control the release rate of freely water soluble drugs for single administration per day by optimization with combined use of hydrophilic and hydrophobic polymers.

Formulation and Evaluation of Solid Self-Nanoemulsifying Drug Delivery System for Enhancing the Solubility and Dissolution Rate of Budesonide

2021 ◽  
pp. 5755-5763
Author(s):  
Kanuri Lakshmi Prasad ◽  
Kuralla Hari
Keyword(s):  
Drug Delivery ◽  
Drug Release ◽  
Dissolution Rate ◽  
Drug Delivery System ◽  
Delivery System ◽  
Ternary Phase Diagram ◽  
Water Soluble ◽  
Drug Release Profile ◽  
Water Soluble Drug

Objective: To enhance solubility and dissolution rate of budesonide through development of solid self-nanoemulsifying drug delivery system (S-SNEDDS). Methods: Liquid self-nanoemulsifying drug delivery systems (L-SNEDDS) were prepared and ternary phase diagram was constructed using Origin pro 8. Liquid self-nanoemulsifying formulation LF2 having 20% oil and 80% of surfactant/co-surfactant was optimized from the three formulations (LF1-LF3) to convert in to solid, through various characterization techniques like self-emulsification, in vitro drug release profile and drug content estimation. The prepared L-SNEDDS converted into S-SNEDDS, SF1-SF6 by adsorption technique using Aerosil 200, Neusilin US2, and Neusilin UFL2 to improve flowability, compressibility and stability. Results: Formulation LF2 exhibited globule size of 82.4 nm, PDI 0.349 and Zeta potential -28.6 mV with drug indicating the stability and homogeneity of particles. The optimized formulation SF4 containing Neusilin UFL2 was characterized by DSC, FTIR, X-Ray diffraction studies and found no incompatibility and no major shifts were noticed. Formulation SF4 released 100 % drug in 20 min against pure drug release of 47 % in 60 min. Regardless of the form (i.e. liquid or solid) similar performance of emulsification efficiency is observed. Conclusion: The results demonstrated that the technique of novel solid self-nanoemulsifying drug delivery system can be employed to enhance the solubility and dissolution rate of poorly water-soluble drug budesonide.

scholarly journals DESIGN AND EVALUATION OF CONTROLLED-RELEASE OCULAR INSERTS OF BRIMONIDINE-TARTRATE AND TIMOLOL MALEATE

2016 ◽  
Vol 9 (1) ◽  
pp. 79 ◽  
Author(s):  
Preethi G. B. ◽  
Prashanth Kunal
Keyword(s):  
Controlled Release ◽  
Drug Release ◽  
Sodium Alginate ◽  
Calcium Chloride ◽  
Release Kinetics ◽  
Water Soluble ◽  
Moisture Loss ◽  
Timolol Maleate ◽  
Brimonidine Tartrate

<p><strong>Objective: </strong>The current work was attempted to formulate and evaluate a controlled-release matrix-type ocular inserts containing a combination of brimonidine tartrate and timolol maleate, with a view to sustain the drug release in the cul-de-sac of the eye.<strong></strong></p><p><strong>Methods: </strong>Initially, the infrared studies were done to determine the drug–polymer interactions. Sodium alginate-loaded ocuserts were prepared by solvent casting technique. Varying the concentrations of polymer—sodium alginate, plasticizer—glycerine, and cross-linking agent—calcium chloride by keeping the drug concentration constant, made a total of nine formulations. These formulations were evaluated for its appearance, drug content, weight uniformity, thickness uniformity, percentage moisture loss, percentage moisture absorption, and <em>in vitro </em>release profile of the ocuserts. Finally, accelerated stability studies and the release kinetics were performed on the optimised formulation.<strong></strong></p><p><strong>Results: </strong>It was perceived that polymer, plasticizer, and calcium chloride had a significant influence on the drug release. The data obtained from the formulations showed that formulation—F9 was the optimised formulation, which exhibited better drug release. The release data of the optimised formulation tested on the kinetic models revealed that it exhibited first-order release kinetics. <strong></strong></p><p><strong>Conclusion: </strong>It can be concluded that a natural bioadhesive hydrophilic polymer such as sodium alginate can be used as a film former to load water soluble and hydrophilic drugs like brimonidine tartrate and timolol maleate. Among all formulations, F9 with 400 mg sodium alginate, 2% calcium chloride and 60 mg glycerin were found to be the most suitable insert in terms of appearance, ease of handling, thickness, <em>in vitro</em> drug release and stability.</p>

Silk Fibroin/Hyaluronic Acid Blend Film with Good Water Stability and Cytocompatibility

2013 ◽  
Vol 377 ◽  
pp. 209-214
Author(s):  
Ling Shuang Wang ◽  
Shu Qin Yan ◽  
Ming Zhong Li
Keyword(s):  
Cell Proliferation ◽  
Hyaluronic Acid ◽  
Silk Fibroin ◽  
Biomedical Applications ◽  
Water Resistance ◽  
High Water ◽  
Casting Method ◽  
Blend Ratio ◽  
Blend Films

Stimulating cell proliferation is a challenge in the field of silk fibroin-based biomaterials. In this study, silk fibroin/hyaluronic acid blend films were prepared by a casting method using carbodiimide as a cross-linking agent. Carbodiimide induced silk fibroin to form Silk I crystal structure which was not affected by the presence of hyaluronic acid. The films showed high water resistance. In vitro, the performance of these films was assessed by seeding L929 cells. The results indicated that the silk fibroin/hyaluronic acid blend films with the blend ratio of 80/20 and 60/40 promoted cell proliferation compared with the pure silk fibroin or hyaluronic acid film. These results suggest that silk fibroin/hyaluronic acid blend films are water stable and cytocompatible materials which are expected to be useful in biomedical applications.

Drug release profile and reduction in the in vitro burst release from pectin/HEMA hydrogel nanocomposites crosslinked with titania

RSC Advances ◽  
2016 ◽  
Vol 6 (23) ◽  
pp. 19060-19068 ◽  
Author(s):  
Elisangela P. da Silva ◽  
Marcos R. Guilherme ◽  
Francielle P. Garcia ◽  
Celso V. Nakamura ◽  
Lucio Cardozo-Filho ◽  
...  
Keyword(s):  
Controlled Release ◽  
Drug Release ◽  
Release Profile ◽  
Burst Release ◽  
Drug Release Profile ◽  
Initial Release ◽  
Hydrogel Nanocomposites

Hydrogel nanocomposites of pectin, HEMA and titania for Vit-B12 controlled release with reduced initial release burst were prepared. A reduction of up to ca. 60% was observed.

Formulation Development of Metoprolol Succinate Controlled Release Tablets using Ethyl-cellulose-polyvinyl-pyrrolidone Coating

2015 ◽  
Vol 8 (2) ◽  
pp. 2851-2857
Author(s):  
Kiran Kumar Vangara ◽  
Kishore K. Konda ◽  
Shiva K. Ravula ◽  
Pradeep K Vuppala ◽  
Vijay K. Sripuram ◽  
...  
Keyword(s):  
Weight Gain ◽  
Controlled Release ◽  
Drug Release ◽  
Ethyl Cellulose ◽  
Film Coating ◽  
Release Profile ◽  
Water Soluble ◽  
Metoprolol Succinate ◽  
Water Soluble Drug

It is challenging to develop a controlled release (CR) formulation for a freely water soluble drug molecule without using rate controlling polymers in the core matrix. This study is aimed to develop and evaluate cost-effective ethyl cellulose (EC)-polyvinyl pyrrolidone (PVP) film coating that can effectively control the release of freely water soluble drug, metoprolol succinate (MS) and to match that of release profile with its marketed tablet. Simple core tables of MS were compressed and coated with a solution composed of hydrophobic rate controlling polymer, EC and water soluble pore forming polymer, PVP. The effect of formulation parameters such as the ratio of EC to PVP and tablet coating weight gain on the in-vitro drug release were evaluated. Release profile of the optimized formulation at different pH conditions was determined and the similarity factor (f2) with marketed release profile was calculated.It was observed that drug release rate increased with a decrease in the ratio of ethyl cellulose to PVP and decreased with increased weight gain of the coating membrane. Among all the formulations, the formulation with EC and PVP at a ratio of 60:40 %w/w and 9% weight gain showed matching release profile to marketed tablet with f2 value of 72.25. The optimized formulation showed pH independent in-vitro release. This study successfully demonstrated that EC-PVP film coating can effectively control the release rate of freely soluble drugs. Once a day CR formulation of metoprolol succinate pharmaceutically equivalent to marketed tablet was developed.  

scholarly journals FORMULATION, DEVELOPMENT AND CHARACTERIZATION OF DRUG DELIVERY SYSTEMS BASED TELMISARTAN ENCAPSULATED IN SILK FIBROIN NANOSPHERE’S

2019 ◽  
Vol 11 (1) ◽  
pp. 247 ◽  
Author(s):  
Shahid Ud Din Wani ◽  
Gangadharappa H. V. ◽  
Ashish N. P.
Keyword(s):  
Drug Delivery ◽  
Drug Release ◽  
Zeta Potential ◽  
Silk Fibroin ◽  
Drug Delivery Systems ◽  
Delivery Systems ◽  
Water Soluble ◽  
Random Coil ◽  
Burst Release

Objective: The aim of the present work was to formulate silk fibroin (SF) nanospheres (NS’s) for drug delivery application. The current study was designed to advance the water solubility and bio-availability of telmisartan by nanoprecipitation method.Methods: SF NS’s loaded with TS were prepared by nanoprecipitation method. The drug was dissolved in aqueous solution of SF by using acetone as a non-solvent. The prepared NS’s were then characterized by FTIR, X-ray diffraction and zeta potential, and were evaluated for its, surface morphology, %drug content, encapsulation efficiency and in vitro drug release.Results: The evaluation results of SF NS’s loaded of TS showed 74.22±0.17 % entrapment efficiency, 35.21±0.02 % of drug loading, and-4.9 mV to-13.6 mV of zeta potential due to the proper bounding of TS with the β-sheets of SF, the particle size reported was within the size range of 160-186 nm having smooth surface and were spherical in shape. The SFNS’s pattern switched from random coil to β-sheet formation on treating with acetone. FTIR and DSC studies marked no such inter-molecular interactions between SF and drug molecules. The % cumulative in vitro drug release from SF NS’s exhibited quick burst release. The in vitro cumulative drug release of SF NS’s of TS it was found that about 74% of the drug was released within 8 h and about 96% of drug released at 24 hr. The rate of drug release increased with the increase in SF ratio.Conclusion: It is believed that these SF NS’s will find potential applications in drug delivery release as drug carriers, especially poor water-soluble drugs. All these results proposed that SF NS’s are eventuality handy in various drug delivery systems.

scholarly journals Swelling and Erosion Modulation of Sterculia Foetida Gum Through Real Time Texture Probing

1970 ◽  
Vol 7 (2) ◽  
pp. 127-132 ◽  
Author(s):  
Bendgude Namdeo ◽  
Iyer Vidya ◽  
Poddar Sushilkumar
Keyword(s):  
Controlled Release ◽  
Drug Release ◽  
Real Time ◽  
Microcrystalline Cellulose ◽  
Release Profile ◽  
Water Soluble ◽  
Matrix Tablets ◽  
Diltiazem Hydrochloride ◽  
Drug Release Profile ◽  
Water Soluble Drug

In the present investigation an attempt has been made to increase therapeutic efficacy, reduce frequency of administration and improve patient compliance by developing controlled release matrix tablets of diltiazem hydrochloride. Diltiazem hydrochloride was formulated as oral controlled release matrix tablets by using sterculia foetida gum. SFG fines were characterized with scanning electron microscopy. The purpose of this study was to optimize release profile of the highly water soluble drug from SFG matrix by using water soluble and swellable excipients like lactose and microcrystalline cellulose respectively. Tablets were prepared by direct compression, and their swelling behavior in presence of these excipients was assessed with the help of a Texture Analyzer. Dissolution assessment was performed using USP 26 apparatus 2 modified by insertion of a mesh to prevent sticking of the tablets to the bottom of vessel and allow them to swell three dimensionally. The interdependence of swelling front movement in relation to excipients type and progression of drug release are explained. It was concluded that unlike in conventional dosage forms insertion of excipients in hydrophilic controlled release tablets containing a water soluble drug gave the finger print information of drug release profile. In vitro drug release from these matrices was characterized and confirmed with the help of real time texture probing. Results indicated that it is possible to achieve desired modulation in the drug release profile by inclusion of lactose and microcrystalline cellulose. Key words: Diltiazem HCl, Sterculia Foetida Gum, Swelling and erosion, Lactose, Texture analysis. doi: 10.3329/dujps.v7i2.2167 Dhaka Univ. J. Pharm. Sci. 7(2): 127-132, 2008 (December)

scholarly journals Preparation of Starch/Gelatin Blend Microparticles by a Water-in-Oil Emulsion Method for Controlled Release Drug Delivery

2014 ◽  
Vol 2014 ◽  
pp. 1-6 ◽  
Author(s):  
Theeraphol Phromsopha ◽  
Yodthong Baimark
Keyword(s):  
Drug Delivery ◽  
Controlled Release ◽  
Average Particle Size ◽  
Water Soluble ◽  
Diffusion Method ◽  
Average Particle ◽  
Blend Ratio ◽  
Oil Emulsion ◽  
Vis Spectroscopy ◽  
Water In Oil Emulsion

Information on the preparation and properties of starch/gelatin blend microparticles with and without crosslinking for drug delivery is presented. The blend microparticles were prepared by the water-in-oil emulsion solvent diffusion method. Glutaraldehyde and methylene blue were used as the crosslinker and the water-soluble drug model, respectively. The blend microparticles were characterized by scanning electron microscopy (SEM), Fourier transform infrared (FTIR) spectroscopy, and UV-Vis spectroscopy. The functional groups of the starch and gelatin blend matrices were determined from the FTIR spectra. Blend microparticles with a nearly spherical shape and internal porous structure were observed from SEM images. The average particle size of the gelatin microparticles depended on the crosslinker ratio but not on the starch/gelatin blend ratio. Thein vitrodrug release content significantly decreased as the crosslinker ratio increased and the starch blend ratio decreased. The results demonstrated that the starch/gelatin blend microparticles should be a useful controlled release delivery carrier for water-soluble drugs.

scholarly journals FORMULATION OPTIMIZATION AND EVALUATION OF FLURBIPROFEN EMULGEL

2020 ◽  
pp. 49-54
Author(s):  
DIKSHA S. CHODANKAR ◽  
SACHI S. KUDCHADKAR ◽  
RAJASHREE S. GUDE ◽  
PRERANA D. NAVTI ◽  
SANAM M. SAWANT
Keyword(s):  
Side Effects ◽  
Drug Release ◽  
Stability Study ◽  
Water Soluble ◽  
Gelling Agent ◽  
Drug Release Profile ◽  
In Vitro Drug Release ◽  
Drug Content ◽  
Dermal Delivery

Objective: The objective of the present study was to formulate flurbiprofen (FLB) emulgel, evaluation of the formulations and the selection of an optimized formulation through in vitro drug release and drug content studies. Flurbiprofen is a non-steroidal anti-inflammatory drug (NSAID) requiring frequent administration and its chronic intake can lead to systemic side effects like gastric irritation and GI bleeding. The development of a dermal drug delivery system can overcome these side effects. Methods: The emulgel formulations were produced using different combinations of oil and emulsifying agents. Carbopol 940 was used as a gelling agent. The prepared emulgels were evaluated for general appearance, pH, spreadability, extrudability, drug content, in vitro drug release, average globule size and viscosity. Results: Optimized formulation F7 showed a better in vitro drug release compared to the marketed gel preparation. The stability study for the optimized formulation was carried out at 25 °C/60 % RH for 3 mo and the emulgel was found to be stable concerning the physical appearance, pH and drug content. Conclusion: The study revolved around the formulation of emulgel containing Flurbiprofen for dermal delivery of the drug. Emulgel was formulated with the purpose to enhance the permeation of poorly water-soluble drug FLB. The study concluded that the optimized emulgel containing FLB exhibited better in vitro drug release profile compared to the marketed formulation.

Sign in / Sign up

Export Citation Format

Share Document