scholarly journals Application of Electrocoagulation Process for Dairy Wastewater Treatment

2013 ◽  
Vol 2013 ◽  
pp. 1-8 ◽  
Author(s):  
Edris Bazrafshan ◽  
Hossein Moein ◽  
Ferdos Kord Mostafapour ◽  
Shima Nakhaie
Keyword(s):  
Reaction Time ◽  
Applied Voltage ◽  
Oxygen Demand ◽  
Dairy Wastewater ◽  
Operating Parameters ◽  
Pollution Load ◽  
Reliable Technique ◽  
Electrocoagulation Process ◽  
Aluminum Electrodes ◽  
Industry Wastewater

Dairy industry wastewater is characterized by high biochemical oxygen demand (BOD5), chemical oxygen demand (COD), and other pollution load. The purpose of this study was to investigate the effects of the operating parameters such as applied voltage, number of electrodes, and reaction time on a real dairy wastewater in the electrocoagulation process. For this purpose, aluminum electrodes were used in the presence of potassium chloride as electrolytes. It has been shown that the removal efficiency of COD, BOD5, and TSS increased with increasing the applied voltage and the reaction time. The results indicate that electrocoagulation is efficient and able to achieve 98.84% COD removal, 97.95% BOD5removal, 97.75% TSS removal, and >99.9% bacterial indicators at 60 V during 60 min. The experiments demonstrated the effectiveness of electrocoagulation techniques for the treatment of dairy wastewaters. Finally, the results demonstrated the technical feasibility of electrocoagulation process using aluminum electrodes as a reliable technique for removal of pollutants from dairy wastewaters.

scholarly journals Removal of Cadmium from Industrial Wastewater using Electrocoagulation Process

2019 ◽  
Vol 26 (1) ◽  
pp. 24-34 ◽  
Author(s):  
Mohammed Alameen Salem ◽  
Najwa Majeed
Keyword(s):  
Heavy Metal ◽  
Removal Efficiency ◽  
Applied Voltage ◽  
Industrial Wastewater ◽  
Batch Reactor ◽  
Operating Parameters ◽  
Initial Concentration ◽  
Initial Ph ◽  
Electrocoagulation Process ◽  
Aluminum Electrodes

Cadmium is one of the heavy metal found in the wastewater of many industries. The electrocoagulation offers many advantages for the removal of cadmium over other methods. So the removal of cadmium from wastewater by using electrocoagulation was studied to investigate the effect of operating parameters on the removal efficiency. The studied parameters were the initial pH, initial concentration, and applied voltage. The study experiments were conducted in a batch reactor with  with two pairs of aluminum electrodes with dimension  and 2mm in thick with 1.5 cm space between them. The optimum removal was obtained at pH =7, initial concentration = 50 mg/L, and applied voltage = 20 V and it was 90%.

Highly Efficient Biodiesel Conversion from Soybean Oil Using Liquid-Phase Plasma Discharge Technology

2019 ◽  
Vol 62 (5) ◽  
pp. 1129-1134 ◽  
Author(s):  
Sarah Wu ◽  
Muhammad Aamir Bashir ◽  
Hsiang Hsieh ◽  
Anilkumar Krosuri ◽  
Armando McDonald
Keyword(s):  
Reaction Time ◽  
Liquid Phase ◽  
Soybean Oil ◽  
Applied Voltage ◽  
Plasma Discharge ◽  
Optimal Combination ◽  
Operating Parameters ◽  
Dielectric Plate ◽  
Molar Ratios ◽  
Liquid Phase Plasma

Abstract. In this study, the use of liquid-phase plasma discharge (LPPD) technology to accelerate the transesterification process was explored. An innovative LPPD reactor was first evaluated by varying the conductive opening size on the dielectric plate (0.75, 1.0, and 1.25 mm) coupled with five methanol to oil molar ratios (MOMR; 3, 4, 5, 6, and 7) and two liquid flowrates through the reactor (2.7 and 4.1 mL s-1) at a given catalyst (NaOH) to oil ratio (NaOR) of 0.8% (w/w). The optimal combination of opening size (1.0 mm), MOMR (5), and flowrate (2.7 mL s-1) was then fixed while the NaOR was varied from 0.4% to 1.2% (w/w) in 0.2% increments to determine the best NaOR for the reactor. The results showed that the best combination of the four operating parameters was an opening size of 1.0 mm, MOMR of 5, liquid flowrate of 2.7 mL s-1, and NaOR of 0.6% (w/w), with which a biodiesel conversion rate of 99.5% was obtained at an applied voltage of 1.2 kV. The transesterification reaction time was found to be only 923 ms. The developed LPPD technology has potential to position biodiesel competitively against petroleum diesel. Keywords: Biodiesel conversion, Liquid-phase plasma discharge, Soybean oil, Transesterification

scholarly journals Applications of Sequencing Batch Reactor in the Degradation of Dairy Industry Wastewater

2019 ◽  
Vol 8 (2) ◽  
pp. 2595-2599
Keyword(s):  
Waste Water ◽  
Sequencing Batch Reactor ◽  
Batch Reactor ◽  
Research Work ◽  
Dairy Industry ◽  
Oxygen Demand ◽  
Raw Milk ◽  
Dairy Wastewater ◽  
Scale Model ◽  
Industry Wastewater

Biodegradation using sequencing batch reactor is one of the best method of treating the wastewater from the diary industries. Milk and milk based products has become most essential and important role in day-to-day life of human. The raw milk undergoes various processing in dairy industries to produce other milk based products. The large quantities of water and other chemicals are required in a diary plant. The volume of water used in a diary industry varies with respect to the availability of water, processing method and type of flow. The waste water after every step of processing is discharged into either the natural water bodies or to the environment which alters the ecological balance. This research work on the laboratory scale model is used for the analysis and treatment of dairy industry wastewater. The parameters studied are the biological oxygen demand, chemical oxygen demand, dissolved oxygen, total dissolved solids, suspended solids, pH and other substances present in the diary waste water. In this study, biodegradation of dairy wastewater was investigated under a sequencing batch reactor under aerobic conditions. It is performed on three different phases with variable reaction time to study the reductions in BOD, COD and other parameters respectively.

scholarly journals Removal of COD from Oil Recovery Industry Wastewater by the Advanced Oxidation Processes(AOP) Based on H2O2

2013 ◽  
Vol 10 (1) ◽  
pp. 31-38 ◽  
Keyword(s):  
Reaction Time ◽  
Oil Recovery ◽  
Oxygen Demand ◽  
Cod Removal ◽  
Fenton Process ◽  
Oil And Grease ◽  
Cod Reduction ◽  
Oxidation Processes ◽  
High Pollution ◽  
Industry Wastewater

The combinations of H2O2/Fe+2, UV/H2O2/Fe+2 and UV/H2O2 process were investigated on treatment of oil recovery industry wastewater. Treatment of oil recovery industry wastewater, a typical high pollution strength industrial wastewater (chemical oxygen deman (COD): 21000 mg l-1, biological oxygen demand (BOD): 8000 mg l-1, oil and grease:1140 mg l-1, total dissolved solids (TDS): 37000 mg l-1, total suspended solids: 2580 mg l-1), was carried out by batch oxidation processes. The optimal mass ratio for H2O2/Fe+2 yielding the highest COD removal was found to be 8.658 corresponding to 200.52 g 1-1 H2O2 and 23.16 g l-1 Fe+2 concentrations for 60 minutes reaction time. Fenton process gave a maximum COD reduction of 86% (from 21000 to 2980 mg l-1) and the combination of UV/H2O2 gave a COD reduction of 39% (from 21000 to 12730). The percentage of removal, after the total reaction time (3.5h), H2O2: 8.4 g l-1 and Fe+2: 0.05g l-1, in the photo Fenton process, corresponded to 81 % of the total initial COD (4200 mg l-1). The oxidative ability of the UV/Fe+2/H2O2 process (81%) was greater than that of the UV/H2O2 process (55%) for 80% diluted wastewater. COD removal efficiency for UV/H2O2 process (COD/H2O2=1/2 (w/w)) was 90%, 55%, and 39 when initial COD was 1050, 4200, and 21000 mg l-1, respectively, whereas COD removal was 943, 2320, and 8270 mg l-1, respectively.

scholarly journals Using Of Different Electrocoagulation Cell Configuration Parameters for Treating of Abu-Ghraib Dairy Products Wastewater

2022 ◽  
Vol 961 (1) ◽  
pp. 012059
Author(s):  
Sara Mohannad Abd Al-Hamza ◽  
Hayder Mohammed Abd Al-Hamed
Keyword(s):  
Reaction Time ◽  
Removal Efficiency ◽  
Applied Voltage ◽  
Water Reuse ◽  
Anthropogenic Activities ◽  
Oxygen Demand ◽  
Cylindrical Shape ◽  
Electrode Shape ◽  
Wide Range ◽  
Population Urbanization

Abstract One of the most significant issues that people throughout the world will confront in the future years is a lack of clean and safe water. Anthropogenic activities, in particular, are polluting water systems. With rising population, urbanization, and climate change, water reuse has become a requirement in some areas of the globe, putting pressure on the development of effective water treatment methods for a range of contaminants. High biological oxygen demand (BOD), chemical oxygen demand (COD), oil-grease, and other pollutant loads define dairy sector effluent. Improved technology is required to address these issues. Electrocoagulation is a new type of therapy. It’s simple to use, ecologically friendly, and removes a wide range of contaminants from a variety of water types. The goal of this study was to see how operational factors such applied voltage, number of electrodes, distance between electrodes, electrode shape, and reaction time affected the electrocoagulation of actual dairy effluent. Aluminum and iron electrodes are used for this purpose. It was discovered that raising the applied voltage, reaction time, and decreasing the distance between electrodes improved COD, BOD, EC, TDS, color, and oil-grease removal efficiency. Moreover, switch between square, triangular electrodes and perforated cylindrical. The data show that electrocoagulation is effective at the maximum COD, BOD removal efficiency of first electrode at 20 holes of cylindrical shape is (88.03) %, (87.97) %, respectively. Second triangle shape is (100) %, (100) % respectively. Third square shape is (99.38) %, (99.42) % respectively. the maximum removal of TDS, EC efficiency of first electrode at 20 holes of cylindrical shape is (67.57) %, (62.34) %, respectively. Second triangle shape is (77.45) %, (67.68) % respectively. Third square shape is (81.96) %, (71.25) % respectively. The maximum color and oil-grease removal efficiency of first electrode at 20 holes of cylindrical shape is (100) %, (100) %, respectively. Second triangle shape is (100) %, (100) % respectively. Third square shape is (100) %, (100) % respectively. Electrocoagulation methods for the treatment of dairy wastewaters were shown to be successful in the research. Finally, the findings indicated that electrocoagulation is a technically feasible method for removing contaminants from dairy wastewaters.

scholarly journals Electrocoagulation of model wastewater using aluminum electrodes

2012 ◽  
Vol 14 (3) ◽  
pp. 66-70 ◽  
Author(s):  
Lech Smoczyński ◽  
Kamilla Teresa Muńska ◽  
Bogusław Pierożyński ◽  
Marta Kosobucka
Keyword(s):  
Oxygen Demand ◽  
Treated Wastewater ◽  
Phosphorus Compounds ◽  
Constant Current ◽  
Optimal Dosage ◽  
Static System ◽  
Effective Removal ◽  
Electrocoagulation Process ◽  
Aluminum Electrodes ◽  
Time Changes

Electrocoagulation makes an alternative method to chemical coagulation. This paper presents the results obtained during the electrocoagulation of the model wastewater using aluminum electrodes. The wastewater was treated by means of chronopotentiometric electrocoagulation process in a static system, at the constant current I = 0.3 A; therefore higher doses of electrocoagulant required longer electrocoagulation time. Changes in zeta potential, pH, turbidity, chemical oxygen demand (COD), suspended solids and total phosphorus concentrations in the treated wastewater were determined. A new method for determining the optimal dosage of the aluminum electrocoagulant was proposed through application of the third degree polynomial function rather than the parabolic equation. An increase in the electrocoagulant dose raised the share of sweep fl occulation in the studied treatment process, resulting in the effective removal over 90% of phosphorus compounds from the system.

Effective removal of cefazolin from hospital wastewater by the electrocoagulation process

2019 ◽  
Vol 80 (12) ◽  
pp. 2422-2429 ◽  
Author(s):  
Yahya Esfandyari ◽  
Keivan Saeb ◽  
Ahmad Tavana ◽  
Aptin Rahnavard ◽  
Farid Gholamreza Fahimi
Keyword(s):  
Reaction Time ◽  
Removal Efficiency ◽  
Oxygen Demand ◽  
Input Voltage ◽  
Treated Wastewater ◽  
Hospital Wastewater ◽  
High Concentration ◽  
Effective Removal ◽  
Effects Of Ph ◽  
Electrocoagulation Process

Abstract The present study evaluated the treatment of hospital wastewater by the electrocoagulation process using aluminum and iron electrodes. The effects of pH, voltage and reaction time on the removal efficiencies of the antibiotic cefazolin, chemical oxygen demand (COD) and turbidity were investigated. The results showed that by increasing reaction time and input voltage, the removal efficiency of pollutants was increased. The highest removal efficiency of cefazolin, COD, and turbidity occurred at neutral pH, which may have been related to the formation of aluminum hydroxide (Al(OH)3) flocs through the combination of aluminum released from the surface of the electrode and the hydroxide ions present in the solution. The conductivity of the treated wastewater at neutral to alkaline pH decreased compared to acidic pH, which may have been due to the adsorption of anions and cations from the solution by the Al(OH)3 flocs. The electrode and energy consumption in the present study was higher than in other studies, which may have been due to the high concentration of COD in and the turbidity of the solution.

Treatment of dairy wastewater by electrocoagulation process: Advantages of combined iron/aluminum electrodes

2019 ◽  
Vol 55 (14) ◽  
pp. 2510-2527 ◽  
Author(s):  
Benoit Chezeau ◽  
Lilya Boudriche ◽  
Christophe Vial ◽  
Amel Boudjemaa
Keyword(s):  
Dairy Wastewater ◽  
Iron Aluminum ◽  
Electrocoagulation Process ◽  
Aluminum Electrodes

scholarly journals Sequential Treatment of Landfill Leachate By Advanced Oxidation Processes and Struvite Precipitation

2021 ◽  
Author(s):  
Sushma lavudya ◽  
maneesha vodnala ◽  
Bhagawan Dheeravath ◽  
kiran kumar Panga ◽  
Vijaya krishna saranga ◽  
...  
Keyword(s):  
Reaction Time ◽  
Landfill Leachate ◽  
Applied Voltage ◽  
Advanced Oxidation Processes ◽  
Inorganic Compounds ◽  
Oxygen Demand ◽  
Operational Parameters ◽  
Treatment Processes ◽  
Sequential Processes ◽  
Optimized Conditions

Abstract Landfill leachate contains organic, inorganic compounds, heavy metals, ammonia, and xenobiotic compounds which are considered unsafe for discharging into surface water which requires to be treated before its discharge into the water. In this paper, preliminary studies are reported on the application of Fenton, Struvite, and Electrooxidation processes for the removal of Chemical Oxygen Demand (COD) and ammonia from landfill leachate. Various operational parameters like pH, dosage, reaction time, and applied voltage were optimized in laboratory batch experiments and evaluated for removal of COD and ammonia. Results demonstrated that the Fenton process could effectively remove COD and ammonia by 75% and 23% respectively at 210 min for Fe+2:H2O2: 1:5 at a fixed pH 3. The Struvite process has been effective in the removal of ammonia by 74% at pH 9 with the dosage of Mg+2:PO43-:NH4+ at 1:1:1 ratio. Results from Electrooxidation for COD and ammonia were observed as 58.25% and 44% respectively at the applied voltage 8 V for a reaction time of 60 min. The efficiency of treatment processes was also evaluated in Sequential processes for COD and ammonia i.e., Sequence-I (Fenton-Electrooxidation-Struvite) and Sequence-II (Fenton-Struvite) at pre-optimized conditions. The sequential processes have been depicted, the removal efficiencies of COD and ammonia of 89% and 82% by Sequence-I; 76.77%, and 77% by Sequence-II respectively. The present study demonstrates that Fenton followed by Electrooxidation and Struvite is an effective treatment process that can enhance the treatment of landfill leachate.

scholarly journals Evaluation of the efficiency of electrocoagulation process in removing cyanide, nitrate, turbidity, and chemical oxygen demand from landfill leachate

2021 ◽  
Vol 8 (3) ◽  
pp. 237-244
Author(s):  
Abdoliman Amouei ◽  
Mehdi Pouramir ◽  
Hosseinali Asgharnia ◽  
Mahmoud Mehdinia ◽  
Mohammad Shirmardi ◽  
...  
Keyword(s):  
Reaction Time ◽  
Chemical Oxygen Demand ◽  
Removal Efficiency ◽  
Current Density ◽  
Oxygen Demand ◽  
Contamination Level ◽  
Municipal Solid Wastes ◽  
Electrocoagulation Process ◽  
Length Width ◽  
Time Parameters

Background: Leachate contains toxic and non-biodegradable substances that are not easily treated by conventional treatment methods. This study investigated the effect of pH, current density, and reaction time parameters on the removal of cyanide (CN- ), nitrate (NO3- ), turbidity, and chemical oxygen demand (COD) from leachate by electrocoagulation process. Methods: This study was an experimental one with direct current using four parallel bipolar aluminum electrodes with 90% purity. The length, width, and thickness of the electrodes were 5 cm, 10 cm, and 2 mm, respectively. There were 6 holes with a diameter of 0.7 cm on each of the electrodes. The samples were prepared from the old leachate of solid waste landfill in Ghaemshahr, Iran. Results: In this study, at a current density of 33 mA/cm2 and a time of 60 minutes, the optimum removal efficiency of cyanide (100 %) was obtained at pH 5.5 and pH 10. Moreover, the maximum removal of nitrate (99.65 %) and turbidity (86.41 %) were at pH 5.5 and pH 8.3, respectively and the highest removal efficiency of COD (83.14 %) was obtained at pH 10. Conclusion: The results showed that the removal of cyanide, nitrate, turbidity, and COD increases with increasing current density and reaction time. Due to the proper removal of nitrate and cyanide from leachate by electrocoagulation, nitrate and cyanide amounts were less than the allowable contamination level. Based on the results, electrocoagulation is considered an efficient and effective method for removing nitrate and cyanide from old leachate of municipal solid wastes.

Sign in / Sign up

Export Citation Format

Share Document