scholarly journals Facile Synthesis of Copper Oxide Nanoparticles via Electrospinning

2014 ◽  
Vol 2014 ◽  
pp. 1-7 ◽  
Author(s):  
Abdullah Khalil ◽  
Mustapha Jouiad ◽  
Marwan Khraisheh ◽  
Raed Hashaikeh

A novel approach for synthesizing copper oxide (CuO) nanoparticles (NPs) through electrospinning is reported. The approach is based on producing rough and discontinuous electrospun nanofibers from a precursor based on copper acetate salt and polyvinyl alcohol (PVA) polymer. Selectively removing the polymeric phase from the fibers produced highly rough CuO nanofibers, which were composed of NPs that are weakly held together in a one-dimensional (1D) manner. Sonication in a suitable liquid under controlled conditions completely disintegrated the nanofibers into NPs, resulting in the formation of uniform CuO NPs suspension. Aberration corrected high resolution transmission electron microscope (HRTEM) showed that the obtained NPs are highly crystalline and nearly sphere-like with a diameter of 30 to 70 nm. Thus, electrospinning, which is a low cost and industrially scalable technique, can also be employed for economic and large scale synthesis of NPs.

2021 ◽  
Author(s):  
CI Chemistry International

A green, cost-effective and eco-friendly method for the synthesis of copper oxide nanoparticles (CuO NPs) using Bougainvillea flower aqueous extract at room temperature was reported. The synthesized CuO NPs were characterized by UV–visible spectroscopy, fourier transform infrared spectroscopy (FTIR), transmission electron microscopy (TEM) and X-ray diffraction (XRD) tecniques. The synthesized particles were highly stable, spherical in shape with an average diameter of 12±4 nm. The CuO NPs were explored for their antifungal activity against Aspergillus niger and responses revealed that CuO NPs are highly efficient to inhibit the fungal growth and zone of inhibition were comparable with standard drug. The green route for the synthesis of CuO NPs is suggested in view of promising antifungal activity.


2020 ◽  
Vol 10 (03) ◽  
pp. 378-382
Author(s):  
Jenan Hussien Taha ◽  
Nada Khudair Abbas ◽  
Azhar A. F. Al-Attraqchi

In this article, a simple new technique for the green synthesis of copper oxide nanoparticles (CuO NPs) using peroxidases oxidoreductases (POX) enzyme extracted from fig leaves for antifungal and antibacterial activities has been reported. Subsequently, a comprehensive investigation of the structural, optical, and morphological properties of the synthesized CuO NPs was elucidated, using X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR), Electrodiagnostic (EDX), atomic force microscopy (AFM), and transmission electron microscopy (TEM) analysis techniques. Specifically, the resultant nanoparticles are spherical with a diameter ranging from 28–68. CuO NPs were further tested for their antifungal activity against Candida and Aspergillus species, while the antibacterial activity was screened in contradiction of pathogenic bacterial strains namely gram-positive Staphylococcus aureus and gram-negative Asinobacterial species. The present study reveals a convenient use of POX fig leaves extract as fuel, for the well-organized synthesis of CuO NPs via green synthesis technique to acquire considerably active antifungal and antibacterial materials.


2020 ◽  
Vol 2020 ◽  
pp. 1-10
Author(s):  
Worku Wubet Andualem ◽  
Fedlu Kedir Sabir ◽  
Endale Tsegaye Mohammed ◽  
Hadgu Hailekiros Belay ◽  
Bedasa Abdisa Gonfa

Development of green technology is generating interest of researchers towards ecofriendly and low-cost methods for biosynthesis of nanoparticles (NPs). In this study, copper oxide (CuO) NPs were synthesized using a copper nitrate trihydrate precursor and Catha edulis leaves extract as a reducing and capping agent during the synthesis. The biosynthesized CuO NPs were characterized using an X-ray diffractometer (XRD), scanning electron microscopy-energy-dispersive X-ray spectroscopy (SEM-EDS), transmission electron microscope (TEM), Ultraviolet visible spectroscopy (UV-Vis), and Fourier transform infrared (FTIR) spectroscopy. XRD characterization confirmed that the biosynthesized CuO NPs possessed a good crystalline nature which perfectly matched the monoclinic structure of bulk CuO. Furthermore, the results obtained from SEM and TEM showed that the biosynthesized CuO NPs were spherical in shape. EDS characterization of the biosynthesized NPs also indicated that the reaction product was composed of highly pure CuO NPs. Moreover, the antimicrobial activities of different concentrations of CuO NPs synthesized using Catha edulis extract were also tested. Accordingly, the result showed that the highest zone of inhibitions measured were for CuO NPs synthesized using 1 : 2 ratios at 40 mg/ml solution concentration and observed to be 22 ± 0.01 mm, 24 ± 0.02 mm, 32 ± 0.02 mm, and 29 ± 0.03 mm for S. aureus, S. pyogenes, E. coli, and K. pneumonia, respectively.


Biomolecules ◽  
2021 ◽  
Vol 11 (4) ◽  
pp. 564
Author(s):  
Devanthiran Letchumanan ◽  
Sophia P. M. Sok ◽  
Suriani Ibrahim ◽  
Noor Hasima Nagoor ◽  
Norhafiza Mohd Arshad

Plants are rich in phytoconstituent biomolecules that served as a good source of medicine. More recently, they have been employed in synthesizing metal/metal oxide nanoparticles (NPs) due to their capping and reducing properties. This green synthesis approach is environmentally friendly and allows the production of the desired NPs in different sizes and shapes by manipulating parameters during the synthesis process. The most commonly used metals and oxides are gold (Au), silver (Ag), and copper (Cu). Among these, Cu is a relatively low-cost metal that is more cost-effective than Au and Ag. In this review, we present an overview and current update of plant-mediated Cu/copper oxide (CuO) NPs, including their synthesis, medicinal applications, and mechanisms. Furthermore, the toxic effects of these NPs and their efficacy compared to commercial NPs are reviewed. This review provides an insight into the potential of developing plant-based Cu/CuO NPs as a therapeutic agent for various diseases in the future.


Author(s):  
Haider Qassim Raheem ◽  
Takwa S. Al-meamar ◽  
Anas M. Almamoori

Fifty specimens were collected from wound patients who visited Al-Hilla Teaching Hospital. The samples were grown on Blood and MacConkey agar for 24-48 hr at 37oC. The bacterial isolates which achieved as a pure and predominant growth from clinical samples as Pseudomonas fluorescens, were identified using morphological properties and Vitek2 system. The anti-bacterial activity of copper oxide nanoparticles (CuO NPs) against was tested by (disk diffusion assay) using dilutions of (400, 200, 100, 50, 25, and 12.5‎µ‎g/ml). The (MIC and MBC) of each isolate was determined. CuO NPs shows wide spectrum antibacterial activity against tested bacteria with rise zone of inhibition diameter that is proportionate with the increase in nanoparticle concentration. The MIC of CuO NPs extended from 100-200‎µ‎g/ml and the MBC ranged from 200-400‎µ‎g/ml. The antibiotic profile was determined by Viteck 2 compact system (Biomérieux). CuO NPs‎ found highly effective and safe in P. fluorescens wounds infections comparing with used antibiotics.


2019 ◽  
Author(s):  
Chem Int

This research work presents a facile and green route for synthesis silver sulfide (Ag2SNPs) nanoparticles from silver nitrate (AgNO3) and sodium sulfide nonahydrate (Na2S.9H2O) in the presence of rosemary leaves aqueous extract at ambient temperature (27 oC). Structural and morphological properties of Ag2SNPs nanoparticles were analyzed by X-ray diffraction (XRD) and transmission electron microscopy (TEM). The surface Plasmon resonance for Ag2SNPs was obtained around 355 nm. Ag2SNPs was spherical in shape with an effective diameter size of 14 nm. Our novel approach represents a promising and effective method to large scale synthesis of eco-friendly antibacterial activity silver sulfide nanoparticles.


2018 ◽  
Vol 15 (2) ◽  
pp. 209-213 ◽  
Author(s):  
Sathish Mohan Botsa ◽  
Ramadevi Dharmasoth ◽  
Keloth Basavaiah

Background: During past two decades, functional nanomaterials have received great attention for many technological applications such as catalysis, energy, environment, medical and sensor due to their unique properties at nanoscale. However, copper oxide nanoparticles (NPs) such as CuO and Cu2O have most widely investigated for many potential applications due to their wide bandgap, high TC, high optical absorption and non-toxic in nature. The physical and chemical properties of CuO and Cu2O NPs are critically depending on their size, morphology and phase purity. Therefore, lots of efforts have been done to prepare phase CuO and Cu2O NPs with different morphology and size. Method: The synthesis of cupric oxide (CuO) and cuprous oxide (Cu2O) NPs using copper acetate as a precursor by varying the reducing agents such as hydrazine sulphate and hydrazine hydrate via sonochemical method. The phase, morphology and crystalline structure of a prepared CuO and Cu2O NPs were investigated by X-ray diffraction (XRD), Fourier transform infrared (FTIR), Field emission scanning electron microscopy (FESEM), Energy dispersive X-ray (EDS) and UV-Visible Diffuse reflectance spectroscopy (DRS). Results: The phase of NPs was tuned as a function of reducing agents.XRD patterns confirmed the formation of pure phase crystalline CuO and Cu2O NPs. FTIR peak at 621 cm-1 confirmed Cu(I)-O vibrations, while CuO vibrations confirmed by the presence of two peaks at 536 and 586 cm-1. Further investigation was done by Raman, which clearly indicates the presence of peaks at 290, 336, 302 cm-1 and 173, 241 cm-1 for CuO and Cu2O NPs, respectively. The FESEM images revealed rod-like morphology of the CuO NPs while octahedral like shape for Cu2O NPs. The presence of elemental Cu and O in stoichiometric ratios in EDS spectra confirms the formation of both CuO and Cu2O NPs. In summary, CuO and Cu2O NPs were successfully synthesized by a sonochemical method using copper acetate as a precursor at different reducing agents. The bandgap of CuO and Cu2O NPs was 2.38 and 1.82, respectively. Furthermore, the phase purity critically depends on reducing agents.


2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Alaa El Din Mahmoud ◽  
Khairia M. Al-Qahtani ◽  
Sahab O. Alflaij ◽  
Salma F. Al-Qahtani ◽  
Faten A. Alsamhan

AbstractEnvironmentally friendly copper oxide nanoparticles (CuO NPs) were prepared with a green synthesis route without using hazardous chemicals. Hence, the extracts of mint leaves and orange peels were utilized as reducing agents to synthesize CuO NPs-1 and CuO NPs-2, respectively. The synthesized CuO NPs nanoparticles were characterized using scanning electron microscopy (SEM), Energy Dispersive X-ray Analysis (EDX), BET surface area, Ultraviolet–Visible spectroscopy (UV–Vis), and Fourier Transform Infrared Spectroscopy (FT-IR). Various parameters of batch experiments were considered for the removal of Pb(II), Ni(II), and Cd(II) using the CuO NPs such as nanosorbent dose, contact time, pH, and initial metal concentration. The maximum uptake capacity (qm) of both CuO NPs-1 and CuO NPs-2 followed the order of Pb(II) > Ni(II) > Cd(II). The optimum qm of CuO NPs were 88.80, 54.90, and 15.60 mg g−1 for Pb(II), Ni(II), and Cd(II), respectively and occurred at sorbent dose of 0.33 g L−1 and pH of 6. Furthermore, isotherm and kinetic models were applied to fit the experimental data. Freundlich models (R2 > 0.97) and pseudo-second-order model (R2 > 0.96) were fitted well to the experimental data and the equilibrium of metal adsorption occurred within 60 min.


Processes ◽  
2020 ◽  
Vol 9 (1) ◽  
pp. 78
Author(s):  
Karla Araya-Castro ◽  
Tzu-Chiao Chao ◽  
Benjamín Durán-Vinet ◽  
Carla Cisternas ◽  
Gustavo Ciudad ◽  
...  

Amongst different living organisms studied as potential candidates for the green synthesis of copper nanoparticles, algal biomass is presented as a novel and easy-to-handle method. However, the role of specific biomolecules and their contribution as reductant and capping agents has not yet been described. This contribution reports a green synthesis method to obtain copper oxide nanoparticles (CuO-NPs) using separated protein fractions from an aqueous extract of brown algae Macrocystis pyrifera through size exclusion chromatography (HPLC-SEC). Proteins were detected by a UV/VIS diode array, time-based fraction collection was carried out, and each collected fraction was used to evaluate the synthesis of CuO-NPs. The characterization of CuO-NPs was evaluated by Dynamic Light Scattering (DLS), Z-potential, Fourier Transform Infrared (FTIR), Transmission Electron Microscope (TEM) equipped with Energy Dispersive X-ray Spectroscopy (EDS) detector. Low Molecular Weight (LMW) and High Molecular Weight (HMW) protein fractions were able to synthesize spherical CuO-NPs. TEM images showed that the metallic core present in the observed samples ranged from 2 to 50 nm in diameter, with spherical nanostructures present in all containing protein samples. FTIR measurements showed functional groups from proteins having a pivotal role in the reduction and stabilization of the nanoparticles. The highly negative zeta potential average values from obtained nanoparticles suggest high stability, expanding the range of possible applications. This facile and novel protein-assisted method for the green synthesis of CuO-NPs may also provide a suitable tool to synthesize other nanoparticles that have different application areas.


2021 ◽  
Vol 21 (no 1) ◽  
Author(s):  
Fatin Fadhel Mohammed Al-Kazaz ◽  
Dhia Hadi Hussain ◽  
Saad AbdulRahman Khalaf

The nanoparticles of both copper oxide (CuO NPs) and selenium (Se NPs) were synthesized by a laser ablation method that is fast and safe in biological applications. It was Characterization by atomic force microscopy (AFM), Xray diffraction (XRD), field emission scanning electron microscopy (FESEM) and atomic force microscopy (AFM), which showed that the size of the nanoparticles was 20-23 nm for Se NPs and 19-23 nm for CuO NPs. The effectiveness of these nanoparticles was examined on vitamin D levels in the group of women with primary infertility (PP) and the group of women with secondary infertility (SP). The results showed a highly significant activation effect of the copper oxide nanoparticles, with an activation rate equal to 13% for the primary sterility group (P = 0.003) and 23% for the secondary sterility group (P = 0.00)


Sign in / Sign up

Export Citation Format

Share Document