scholarly journals Numerical Analysis of the Energy Improvement of Plastering Mortars with Phase Change Materials

2014 ◽  
Vol 2014 ◽  
pp. 1-12 ◽  
Author(s):  
A. Váz Sá ◽  
R. M. S. F. Almeida ◽  
H. Sousa ◽  
J. M. P. Q. Delgado
Keyword(s):  
Phase Change ◽  
Energy Demand ◽  
Phase Change Materials ◽  
Storage Capacity ◽  
Heat Storage ◽  
Indoor Temperature ◽  
Ambient Temperatures ◽  
Simulation Tools ◽  
Building Components ◽  
Cooling Energy Demand

Building components with incorporated phase change materials (PCMs) meant to increase heat storage capacity and enable stabilization of interior buildings surface temperatures, whereby influencing the thermal comfort sensation and the stabilization of the interior ambient temperatures. The potential of advanced simulation tools to evaluate and optimize the usage of PCM in the control of indoor temperature, allowing for an improvement in the comfort conditions and/or in the cooling energy demand, was explored. This paper presents a numerical and sensitivity analysis of the enthalpy and melting temperature effect on the inside building comfort sensation potential of the plastering PCM.

Test and Select of Carrier of Phase Change Materials for Asphalt Mixtures

2012 ◽  
Vol 511 ◽  
pp. 60-63
Author(s):  
Yu Zheng Ren ◽  
Jie Zhu Liu ◽  
Biao Ma ◽  
Sha Sha Wang
Keyword(s):  
Carbon Black ◽  
Phase Change ◽  
Phase Change Materials ◽  
Storage Capacity ◽  
Heat Storage ◽  
Physical Adsorption ◽  
Asphalt Mixture ◽  
Asphalt Mixtures ◽  
Adsorption Method ◽  
Micro Morphology

Directly mixing the PCM to asphalt mixture may adversely affect mixture performance. By the experiment of SEM, the diffusion-absorption circle testing and the DSC, the micro-morphology and the adsorption characteristics to PCM of four carriers and the thermal properties of the composite shape-stabilized phase change materials (CSPCM) were analyzed. The results showed that the activated carbon, the floating bead and the white carbon black have more developed porous structure. The white carbon black has the best effect on the adsorption of PCM. The shape-stabilized PCM prepared by the physical adsorption method has the leakage problem. The CSPCM with the white carbon black carrier has the best heat storage capacity. The white carbon black is the best carrier of PCM for asphalt mixture.

scholarly journals Evaluation of Energy Performance and Thermal Comfort Considering the Heat Storage Capacity and Thermal Conductivity of Biocomposite Phase Change Materials

Processes ◽  
2021 ◽  
Vol 9 (12) ◽  
pp. 2191
Author(s):  
Su-Gwang Jeong ◽  
Taemin Lee ◽  
Jeonghun Lee
Keyword(s):  
Thermal Conductivity ◽  
Energy Consumption ◽  
Thermal Comfort ◽  
Phase Change ◽  
Chemical Stability ◽  
Phase Change Materials ◽  
Storage Capacity ◽  
Heat Storage ◽  
Building Energy ◽  
Vacuum Impregnation

The application of phase change materials (PCMs) has been verified as an effective strategy for improving energy efficiency and reducing greenhouse gas emissions. Biocomposite PCMs (Bc-PCM) exhibit large latent heat, chemical stability, and a wide temperature range. In this study, thermal conductivity improved Bc-PCM (TBc-PCM) was made via vacuum impregnation with graphene nanoplatelets (GNPs). Chemical stability analysis and thermal performance analyses of the Bc-PCM and TBc-PCM were carried out as well as building energy simulations and thermal comfort analyses. Our results show Bc-PCM showed a higher heat storage capacity and enthalpy value compared to TBc-PCM. TBc-PCM exhibited a 378% increase in thermal conductivity compared to Bc-PCM. Building energy simulation results revealed that annual heating and cooling energy consumption decreased as the thickness of the PCM layer increased. In addition, the Bc-PCM with a larger PCM capacity was more effective in reducing energy consumption during the heating period. On the other hand, the cooling energy reduction effect was greater when TBc-PCM with high thermal conductivity was applied because of the high heat transfer during the cooling period. Thermal comfort evaluation revealed it was more comfortable when PCM was applied.

scholarly journals Using the Analytic Hierarchy Process to Prioritize and Select Phase Change Materials for Comfort Application in Buildings

2014 ◽  
Vol 10 (1) ◽  
pp. 21-28 ◽  
Author(s):  
Lavinia Gabriela Socaciu ◽  
Paula Veronica Unguresan
Keyword(s):  
Energy Storage ◽  
Phase Change ◽  
Thermal Energy ◽  
Thermal Energy Storage ◽  
Phase Change Materials ◽  
Storage Capacity ◽  
Heat Storage ◽  
Analytic Hierarchy ◽  
Energy Storage Capacity ◽  
Hierarchy Process

Abstract Phase change materials (PCMs) selection and prioritization for comfort application in buildings have a significant contribution to the improvement of latent heat storage systems. PCMs have a relatively large thermal energy storage capacity in a temperature range close to their switch point. PCMs absorb energy during the heating process as phase change takes place and release energy to the environment in the phase change range during a reverse cooling process. Thermal energy storage systems using PCMs as storage medium offer advantages such as: high heat storage capacity and store/release thermal energy at a nearly constant temperature, relative low weight, small unit size and isothermal behaviour during charging and discharging when compared to the sensible thermal energy storage. PCMs are valuable only in the range of temperature close to their phase change point, since their main thermal energy storage capacity depend on their mass and on their latent heat of fusion. Selection of the proper PCMs is a challenging task because there are lots of different materials with different characteristics. In this research paper the principles and techniques of the Analytic Hierarchy Process (AHP) are presented, discussed and applied in order to prioritize and select the proper PCMs for comfort application in buildings. The AHP method is used for solving complex decisional problems and allows the decision maker to take the most suitable decisions for the problem studied. The results obtained reveal that the AHP method can be successfully applied when we want to choose a PCM for comfort application in buildings.

scholarly journals Thermal Energy Storage by the Encapsulation of Phase Change Materials in Building Elements—A Review

Materials ◽  
2021 ◽  
Vol 14 (6) ◽  
pp. 1420
Author(s):  
José Luis Reyez-Araiza ◽  
Jorge Pineda-Piñón ◽  
José M. López-Romero ◽  
José Ramón Gasca-Tirado ◽  
Moises Arroyo Contreras ◽  
...  
Keyword(s):  
Phase Change ◽  
Latent Heat ◽  
Energy Demand ◽  
Phase Change Materials ◽  
Heat Storage ◽  
Technological Development ◽  
Construction Materials ◽  
Lightweight Aggregate ◽  
Latent Heat Storage ◽  
Building Elements

The energy sector is one of the fields of interest for different nations around the world. Due to the current fossil fuel crisis, the scientific community develops new energy-saving experiences to address this concern. Buildings are one of the elements of higher energy consumption, so the generation of knowledge and technological development may offer solutions to this energy demand, which are more than welcome. Phase change materials (PCMs) included in building elements such as wall panels, blocks, panels or coatings, for heating and cooling applications have been shown, when heating, to increase the heat storage capacity by absorbing heat as latent heat. Therefore, the use of latent heat storage systems using phase change materials (PCMs) has been investigated within the last two decades. In the present review, the macro and micro encapsulation methods for construction materials are reviewed, the former being the most viable method of inclusion of PCMs in construction elements. In addition, based on the analysis of the existing papers on the encapsulation process of PCMs, the importance to pay more attention to the bio-based PCMs is shown, since more research is needed to process such PCMs. To determine its thermophysical and mechanical behavior at the micro and macro levels, in order to see the feasibility of substituting petroleum-based PCMs with a more environmentally friendly bio-based one, a section devoted to the excellent PCM with lightweight aggregate (PCM-LWA concrete) is presented due to the lack of description given in other reviews.

scholarly journals A Review on Shape-Stabilized Phase Change Materials for Latent Energy Storage in Buildings

2020 ◽  
Vol 12 (22) ◽  
pp. 9481
Author(s):  
Monika Gandhi ◽  
Ashok Kumar ◽  
Rajasekar Elangovan ◽  
Chandan Swaroop Meena ◽  
Kishor S. Kulkarni ◽  
...  
Keyword(s):  
Thermal Conductivity ◽  
Energy Storage ◽  
Phase Change ◽  
Liquid State ◽  
Energy Demand ◽  
Phase Change Materials ◽  
Temperature Fluctuations ◽  
Good Evidence ◽  
Thermal Mass ◽  
Indoor Temperature

Many countries in the Global South have hot and dry climates with large diurnal temperature variations, which leads to large demand for space cooling—which is likely to increase with climate change. A common approach to dampen the indoor temperature fluctuations and thus reduce cooling energy demand is the use of thermal mass. However, the use of lightweight structures in many cities (e.g., high-rise structures, or for earthquake protection) precludes the use of traditional forms of thermal mass. Therefore, phase change materials (PCMs) are being widely developed as thermal energy storage systems for building applications. However, challenges such as leakage of PCMs in liquid state and their low thermal conductivity, still limit their applications in buildings. In this paper, we review the potential of Form or Shape-Stabilized Phase Change Materials (SSPCMs), which are developed by incorporating the PCM into a supporting matrix to prevent leakage in liquid state whilst improving thermal conductivity. We review different methods of preparation and the resultant thermal properties and chemical stability. We find good evidence in the literature for SSPCMs to reduce PCM leakage in liquid state, dampen indoor temperature fluctuations, and potentially alleviate peak energy demand by shifting peak loads to off-peak periods.

scholarly journals Thermal Analysis of Integrating Roof with Phase Change Materials for Energy Saving in Residential Buildings

2018 ◽  
Vol 7 (4) ◽  
pp. 118
Author(s):  
Hayder M. Jaffal ◽  
Tawfeeq W. Mohammed ◽  
Marwa H. Wasmi
Keyword(s):  
Energy Consumption ◽  
Phase Change ◽  
Energy Demand ◽  
Phase Change Materials ◽  
Residential Buildings ◽  
Residential Building ◽  
Thermal Conditions ◽  
Indoor Temperature ◽  
Good Potential ◽  
Thermo Physical Properties

The sector of air-conditioning in the residential building consumes most of the total ‎electricity supplied for heating or cooling. Thus it has a major impact on the greenhouse gases and climate. Phase change ‎materials (PCMs) are regarded as a possible solution for reducing the energy consumption of ‎buildings by storing the heat and releasing it in certain times. The present study assists for the ‎utilization of PCMs in the roof of residential building to absorb the heat comes from solar ‎radiation during the daytime and releasing it to the inside nightly. Building considerations ‎as well as thermo-physical properties of PCMs have been taken and measured experimentally. ‎Results have shown that these materials have a good potential for reducing energy demand ‎and satisfy comfortable thermal conditions. The obtained readings, from a rig model built for that purpose, ‎showed that the indoor temperature could increase by 5-9oC in the winter compared to that ‎measured in a traditional one. Furthermore, a simulation program depended on degree-days ‎method explained that the energy consumption could be saved up to 75%. Thus PCMs could ‎submit encouraging suggestions toward the sustainability.‎

Sign in / Sign up

Export Citation Format

Share Document