scholarly journals Lateral Earth Pressure behind Walls Rotating about Base considering Arching Effects

2014 ◽  
Vol 2014 ◽  
pp. 1-7 ◽  
Author(s):  
Dong Li ◽  
Wei Wang ◽  
Qichang Zhang
Keyword(s):  
Conversion Factor ◽  
Retaining Wall ◽  
Earth Pressure ◽  
Soil Mass ◽  
Shear Stresses ◽  
Key Factors ◽  
Lateral Earth Pressure ◽  
The Earth ◽  
Common Effect ◽  
The Common

In field, the earth pressure on a retaining wall is the common effect of kinds of factors. To figure out how key factors act, it has taken into account the arching effects together with the contribution from the mode of displacement of a wall to calculate earth pressure in the proposed method. Based on Mohr circle, a conversion factor is introduced to determine the shear stresses between artificial slices in soil mass. In the light of this basis, a modified differential slices solution is presented for calculation of active earth pressure on a retaining wall. Comparisons show that the result of proposed method is identical to observations from model tests in prediction of lateral pressures for walls rotating about the base.

Determination of apparent earth pressure diagram for anchored walls in c–φ soil with surcharge

2020 ◽  
Vol 17 (4) ◽  
pp. 481-489
Author(s):  
Seyyed Pouya Alavinezhad ◽  
Hadi Shahir
Keyword(s):  
Retaining Wall ◽  
Ground Surface ◽  
Earth Pressure ◽  
Ground Level ◽  
Content Type ◽  
Lateral Earth Pressure ◽  
The Earth ◽  
Real Distribution ◽  
Strain Modeling

Purpose The purpose of this study is to present a diagram for the lateral earth pressure of c–φ soils exerted on anchored walls in presence of surcharge. Design/methodology/approach To this end, two-dimensional plane strain modeling of anchored wall was carried out in Plaxis software. To validate the numerical model, two excavations with different specifications were simulated and the model results were compared with the available results. Subsequently, a parametric analysis was done and based on its results, a diagram was proposed for the lateral earth pressure of c–φ soils including the surcharge effects. Findings The proposed diagram without the surcharge and cohesion effects is a trapezoidal with zero value at the ground surface that is linearly approaching the apparent earth pressure of sand according to Terzaghi and Peck (1967) at 0.1H (H: wall height). The surcharge and cohesion effects at the ground level is 4 Ka*q and 0, respectively, and below 0.1H, they are treated as the same way for lateral earth pressure of a retaining wall. It should be emphasized that the apparent pressure diagram for design does not resemble the real distribution of earth pressure against the wall and it is for calculating the values of the anchors loads. Originality/value The available diagrams to determine the earth pressure exerted on the anchored walls are related to sandy or clayey soils and do not take the presence of surcharge into account. Thus, the proposed diagram is quite original and different from the previous ones.

Study on Soil Pressure of High Fill Retaining Wall in Construction Stage

2012 ◽  
Vol 204-208 ◽  
pp. 718-721 ◽  
Author(s):  
Peng Li ◽  
Xiao Song
Keyword(s):  
Retaining Wall ◽  
Earth Pressure ◽  
Monitoring Data ◽  
Experiment Study ◽  
Pressure Monitoring ◽  
Soil Pressure ◽  
Construction Stage ◽  
The Earth ◽  
Pressure Calculation ◽  
Practical Guidance

The traditional formula using for the calculation of Expressway on high embankment of the retaining wall and the earth pressure can not be very good practical. In order to accurately determine the soil pressure calculation of the complex retaining wall in construction stage for guaranteeing the engineering safety, the experiment study on soil pressure is done, and the study on soil pressure monitoring data is also done. Then the valuable conclusions are obtained to facilitate better practical guidance for construction.

A Double Inequality Method for Calculate the Loading Capacity of a Sheet Pile DIMSP

2012 ◽  
Vol 268-270 ◽  
pp. 725-728
Author(s):  
Yi Huan Xie
Keyword(s):  
Retaining Wall ◽  
Engineering Application ◽  
Earth Pressure ◽  
Plasticity Condition ◽  
Loading Capacity ◽  
Sheet Pile ◽  
Double Inequality ◽  
The Earth ◽  
Additional Correction ◽  
Set Up

The passive earth pressure on the both sides of a sheet pile retaining wall is owing to plasticity bounded, a fact that affects the horizontal loading capacity of the wall. In order to find out a method, that the loading capacity of the wall can be analytically calculated and the mentioned constrain could be token into account, the paper set up a DIMSP model, which consists of mechanics equilibrium principle including two inequalities for the plasticity condition of earth pressure. The deduced solution of the model is capable of calculating the bearing capacity, and possesses the advantages of no additional correction of the cut in depth of the wall. Further more the continuity of earth pressure distribution is ensured by this model, an adjustment of the earth pressure figure is also without difficulty possible. For engineering application some graphics are given, the cut in depth of the wall can be read from them conveniently.

Study on the applicability of a retaining wall using batter piles in clay

2016 ◽  
Vol 53 (8) ◽  
pp. 1195-1212 ◽  
Author(s):  
Minsu Seo ◽  
Jong-Chul Im ◽  
Changyoung Kim ◽  
Jae-Won Yoo
Keyword(s):  
Lateral Displacement ◽  
Retaining Wall ◽  
Earth Pressure ◽  
Integrated System ◽  
Element Analysis ◽  
Test Execution ◽  
The Earth ◽  
National University ◽  
Clay Ground ◽  
Batter Piles

A retaining wall using batter piles has been developed and studied to improve existing earth-retaining structures at Pusan National University. The earth-retaining method is a temporary excavation method using an integrated system of front supports and batter piles. The batter piles connected to the front supports significantly reduce the earth pressure acting on the front supports by distributing it to batter piles to increase structural stability. In this study, the existence of batter piles, the fixity of the tips of front supports or batter piles, the spacing between batter piles, and the verticality of front supports are varied across model tests. The lateral displacement of the earth-retaining wall decreased by approximately 40% and 15% for the existence and fixity of batter piles, respectively. The applicability of the earth-retaining method using batter piles has been verified with finite element analysis and field test execution in clay ground.

Numerical Simulation on the Stress Characteristics of Prestressed Retaining Wall

2013 ◽  
Vol 477-478 ◽  
pp. 596-599
Author(s):  
Jian Qing Wu ◽  
Hong Bo Zhang ◽  
Xiu Guang Song ◽  
Yi Fan Yu ◽  
Chao Li
Keyword(s):  
Numerical Simulation ◽  
Stress Distribution ◽  
Bearing Capacity ◽  
Retaining Wall ◽  
Earth Pressure ◽  
Lateral Earth Pressure ◽  
Prestressed Anchor

With the highway subgrade fill increasing, traditional retaining wall cannot meet the requirements for supporting. To meet this requirement, the prestressed opposite-pull retaining wall was put forward. Due to the anchor pull of the new-style retaining wall, its bearing capacity was enhanced, but the stress is not clear. In order to reveal the stress distribution of the prestressed opposite-pull retaining wall, FLAC3D was adept to do numerical simulation on the new-style retaining wall. It simulated three conditions of the wall with no anchor, with anchor but without prestress and with prestressed anchor. The results showed that, after the layout of prestressed anchor, the lateral earth pressure of the region near the anchor increased with the increase of prestress, the lateral earth pressure of the wall is parabola distribution. The lateral earth pressure was larger than that of the wall with no anchor and with anchor but without prestress. The bearing capacity of the retaining wall was effectively improved.

scholarly journals The stability of the Corrugated Concrete Sheet Pile (CCSP) of the Soil Retaining Wall at the Abutmen Bridge Bh 1751 in Lok Ulo District, Kebumen

2018 ◽  
Vol 3 (1) ◽  
Author(s):  
Septiana Widi Astuti ◽  
Ayu Prativi
Keyword(s):  
Rolling Force ◽  
Retaining Wall ◽  
Earth Pressure ◽  
Deep Excavation ◽  
Safety Requirements ◽  
Lateral Earth Pressure ◽  
Bridge Abutment ◽  
Excavation Work ◽  
The Stability ◽  
Flexible Retaining Wall

Abutment bridge is a building under the bridge located on both sides of the bridge end. The process of building a bridge abutment often requires excavation to the depth of the abutment base so that the abutment reinforcement and casting work can be carried out. In deep excavation work, each side of the excavation needs to be installed in a flexible retaining wall type (plaster) first. In this study, CCSP stability analysis was carried out on earth excavation work for abutment bridge BH 1751. The calculation method starts from determining the lateral earth pressure acting on the soil, then determining the depth of CCSP planting that is able to produce CCSP stability on the rolling force. The analysis shows that the depth of CCSP planting that meets the safety requirements of the rolling force is 20 m

Sign in / Sign up

Export Citation Format

Share Document