scholarly journals Energy Consumption Based Low Energy Aware Gateway (LEAG) Protocol in Wireless Sensor Networks

Wireless Sensor Networks (WSN) consists of a large amount of nodes connected in a self-directed manner. The most important problems in WSN are Energy, Routing, Security, etc., price of the sensor nodes and renovation of these networks is reasonable. The sensor node tools included a radio transceiver with an antenna and an energy source, usually a battery. WSN compute the environmental conditions such as temperature, sound, pollution levels, etc., WSN built the network with the help of nodes. A sensor community consists of many detection stations known as sensor nodes, every of which is small, light-weight and portable. Nodes are linked separately. Each node is linked into the sensors. In recent years WSN has grow to be an essential function in real world. The data’s are sent from end to end multiple nodes and gateways, the data’s are connected to other networks such as wireless Ethernet. MGEAR is the existing mechanism. It works with the routing and energy consumption. The principal problem of this work is choosing cluster head, and the selection is based on base station, so the manner is consumes energy. In this paper, develop the novel based hybrid protocol Low Energy Aware Gateway (LEAG). We used Zigbee techniques to reduce energy consumption and routing. Gateway is used to minimize the energy consumption and data is send to the base station. Nodes are used to transmit the data into the cluster head, it transmit the data into gateway and gateway compress and aggregate the data then sent to the base station. Simulation result shows our proposed mechanism consumes less energy, increased throughput, packet delivery ration and secure routing when compared to existing mechanism (MGEAR).

Energies ◽  
2020 ◽  
Vol 13 (16) ◽  
pp. 4072
Author(s):  
Tanzila Saba ◽  
Khalid Haseeb ◽  
Ikram Ud Din ◽  
Ahmad Almogren ◽  
Ayman Altameem ◽  
...  

In recent times, the field of wireless sensor networks (WSNs) has attained a growing popularity in observing the environment due to its dynamic factors. Sensor data are gathered and forwarded to the base station (BS) through a wireless transmission medium. The data from the BS is further distributed to end-users using the Internet for their post analysis and operations. However, all sensors except the BS have limited constraints in terms of memory, energy and computational resources that degrade the network performance concerning the network lifetime and trustworthy routing. Therefore, improving energy efficiency with reliable and secure transmissions is a valuable debate among researchers for critical applications based on low-powered sensor nodes. In addition, security plays a significant cause to achieve responsible communications among sensors due to their unfixed and variable infrastructures. Keeping in view the above-mentioned issues, this paper presents an energy-aware graph clustering and intelligent routing (EGCIR) using a supervised system for WSNs to balance the energy consumption and load distribution. Moreover, a secure and efficient key distribution in a hierarchy-based mechanism is adopted by the proposed solution to improve the network efficacy in terms of routes and links integrity. The experimental results demonstrated that the EGCIR protocol enhances the network throughput by an average of 14%, packet drop ratio by an average of 50%, energy consumption by an average of 13%, data latency by an average of 30.2% and data breaches by an average of 37.5% than other state-of-the-art protocols.


2020 ◽  
Vol 2020 ◽  
pp. 1-19 ◽  
Author(s):  
Kashif Naseer Qureshi ◽  
Muhammad Umair Bashir ◽  
Jaime Lloret ◽  
Antonio Leon

Wireless sensor networks (WSNs) are becoming one of the demanding platforms, where sensor nodes are sensing and monitoring the physical or environmental conditions and transmit the data to the base station via multihop routing. Agriculture sector also adopted these networks to promote innovations for environmental friendly farming methods, lower the management cost, and achieve scientific cultivation. Due to limited capabilities, the sensor nodes have suffered with energy issues and complex routing processes and lead to data transmission failure and delay in the sensor-based agriculture fields. Due to these limitations, the sensor nodes near the base station are always relaying on it and cause extra burden on base station or going into useless state. To address these issues, this study proposes a Gateway Clustering Energy-Efficient Centroid- (GCEEC-) based routing protocol where cluster head is selected from the centroid position and gateway nodes are selected from each cluster. Gateway node reduces the data load from cluster head nodes and forwards the data towards the base station. Simulation has performed to evaluate the proposed protocol with state-of-the-art protocols. The experimental results indicated the better performance of proposed protocol and provide more feasible WSN-based monitoring for temperature, humidity, and illumination in agriculture sector.


Author(s):  
Mohammed Réda El Ouadi ◽  
Abderrahim Hasbi

The rapid development of connected devices and wireless communication has enabled several researchers to study wireless sensor networks and propose methods and algorithms to improve their performance. Wireless sensor networks (WSN) are composed of several sensor nodes deployed to collect and transfer data to base station (BS). Sensor node is considered as the main element in this field, characterized by minimal capacities of storage, energy, and computing. In consequence of the important impact of the energy on network lifetime, several researches are interested to propose different mechanisms to minimize energy consumption. In this work, we propose a new enhancement of low-energy adaptive clustering hierarchy (LEACH) protocol, named clustering location-based LEACH (CLOC-LEACH), which represents a continuity of our previous published work location-based LEACH (LOC-LEACH). The proposed protocol organizes sensor nodes into four regions, using clustering mechanism. In addition, an efficient concept is adopted to choose cluster head. CLOC-LEACH considers the energy as the principal metric to choose cluster heads and uses a gateway node to ensure the inter-cluster communication. The simulation with MATLAB shows that our contribution offers better performance than LEACH and LOC-LEACH, in terms of stability, energy consumption and network lifetime.


2021 ◽  
Vol 2021 ◽  
pp. 1-14
Author(s):  
Jin Yong ◽  
Zhou Lin ◽  
Wei Qian ◽  
Bai Ke ◽  
Wang Chen ◽  
...  

In wireless sensor networks (WSNs), due to the limited energy of sensor nodes, how to design efficient hierarchical routing algorithms to balance network resources and extend network life is an important problem to be solved. Aiming at the problems such as random selection of cluster head, redundancy of working node, and construction of cluster head transmission path, which affect network energy consumption, this paper proposes a multihop routing algorithm based on path tree (MHRA-PT) to optimize the network energy. Firstly, some nodes are those close to the base station and have large remaining energy which are selected to construct a cluster head set. Then, after clustering, each cluster is divided into different regions, and in each region, nodes with residual energy greater than the average residual energy of the cluster are selected as a working node. Finally, the cluster heads are sorted according to their distance from base station, and the next hop node is selected for each cluster head in turn until a path tree rooted at base station is formed completely, leading to data transmission from working node to base station. Simulation results show that the proposed algorithm can effectively reduce network energy consumption, balance network resources, and prolong network life cycle.


Author(s):  
Asgarali Bouyer ◽  
Abdolreza Hatamlou

Wireless Sensor Networks (WSNs) consist of many sensor nodes, which are used for capturing the essential data from the environment and sending it to the Base Station (BS). Most of the research has been focused on energy challenges in WSN. There are many notable studies on minimization of energy consumption during the process of sensing the important data from the environment where nodes are deployed. Clustering-based routing protocols are an energy-efficient protocols that improve the lifetime of a wireless sensor network. The objective of the clustering is to decrease the total transmission power by aggregating into a single path for prolonging the network lifetime. However, the problem of unbalanced energy consumption exists in some cluster nodes in the WSNs. In this paper, a hybrid algorithm is proposed for clustering and cluster head (CH) election. The proposed routing protocol hybridized Penalized Fuzzy C-Means (PFCM) and Self Organization Map (SOM) algorithms with LEACH protocol for the optimum numbers of the CHs and the location of them. Simulation results reveal that the proposed algorithm outperforms other existing protocols in terms of network life, number of dead sensor nodes, energy consumption of the network and convergence rate of the algorithm in comparison to the LEACH algorithm.


Author(s):  
K R Yadav ◽  
Vipin Pal ◽  
Girdhari Singh ◽  
R P Yadav

Clustering is an efficient approach to capitalize the energy of energy constraint sensor nodes in wireless sensor networks. Clustering schemes do not guarantee formation of clusters with equal number of nodes. So data frames transmitted by the nodes vary. TDMA schedule of nodes of smaller cluster is smaller than others that results more number of data frames and hence more energy consumption. The non uniform energy consumption of nodes affects the load balancing of network and these nodes are more prone to die earlier than others. In this paper, an improved scheme for cluster head selection is proposed. Clusters having variable frame slots for nodes are applied to E-LEACH and improved E-LEACH to make the cluster more load balanced. Simulation is carried out in NS-2 to analyze the performance of E-LEACH and improved E-LEACH with variable frame length. Variable frame slot scheme for clusters is also measured with the varying distance of base station from the field. Simulation results show that clustering with variable frame length has an improvement of 7% in node death rate over E-LEACH and an improvement of 9% in node death rate over improved ELEACH. Results suggest that variable frame length scheme improves the performance of clustering schemes for WSNs and have most significant result at base station located at 75m from the field.


2017 ◽  
Vol 6 (1) ◽  
pp. 70-75 ◽  
Author(s):  
A. Tamizharasi M. E. ◽  
J. Jasmine Selvathai M. E. ◽  
A. Kavi Priya ◽  
Maarlin R. ◽  
Harinetha M.

Wireless sensor networks idea is envisioned and defined as self-deployed, error prone, long living inexpensive communication devices that are densely deployed to collect data from physical space. Sensor nodes communicate with each other to detect events depending on the application, to collect and process data, and to transmit the sensed information to the base station by hopping the data from node to node. Major challenge in wireless network is energy consumption, since the sensor devices are deployed on unattended wide areas and replacing their batteries is not very feasible. Therefore, designing energy-aware algorithms becomes a major challenge for extending the lifetime of sensors. The lifetime of the network can be maximized by selecting the most optimal cluster head. In this paper, a heuristic decision making approach is proposed for producing energy-aware clusters with optimal selection of cluster head. This helps to improve the efficiency and accuracy and overcome the drawbacks like getting trapped at a local extreme in the optimization process.


Author(s):  
K. Neeraja

In this paper author describing the concept of throughput and limited energy consumption while routing data to base station and will use multiple routes to forward data to base station. Wireless sensor networks (WSNs)remains resource constrict. Energy is one of the most essential resources in such networks. Hence, optimal use of energy is significant. In existing scheme sensor nodes are movable, base station is fixed and energy consumption is more. To overcome this, we are using the E2R2 protocol in which both sensor nodes & base station are mobile. The proposed protocol is hierarchical along with cluster based. All clusters contain one cluster head (CH) node, dual deputy CH nodes, also a few of ordinary sensor nodes. The reclustering time along with energy requirement has been decreases by introducing the concept of CH panel. All things Considered the reliability aspect of this protocol, it brings leading effort to provide a detailed throughput level by the BS. Topology of mobile wireless sensor networks with more no of nodes which is formed as clusters and transmission of packets between the sensor nodes is done to the base station [BS].Which is routed using E2R2 PROTOCOL, parameters such as throughput, energy spent. The simulation displays a certain proposed design successfully decreases the energy consumption among the nodes, and thus significantly improves the throughput compared to the existing protocol.


2020 ◽  
Vol 30.8 (147) ◽  
pp. 14-21
Author(s):  
Thanh Huong Nguyen ◽  
◽  
Dang Toan Dao ◽  

Energy efficiency is one of the important factors when exploiting Wireless Sensor Networks, especially for increasing lifespan and performance. In the network nowadays, the number of sensor nodes can reach hundreds or thousands and can be arranged in complex hierarchical architecture. Besides, the current sensor nodes have a small size, limited battery source but are operated in vast areas. The clustered-based method has been an effective and potentially extensible means of boosting the management and operation of such large-scale networks and minimizing the overall energy consumption. In this paper, the issue of arranging and routing the nodes in the sensor network in a hierarchical manner is investigated, in which each lowest level sensor nodes are grouped in a cluster with a common cluster head, then the cluster-head plays an intermediate role transmit the information back and forth between the sensor nodes and the base station. In this way, the route to exchange information can not only be optimized with respect to the distance but also for energy spent on the communication. In order to do so, this paper proposed a novel method based on a Genetic Algorithm to establish a routing protocol to achieve energy optimization. The results demonstrate that this approach can decrease the energy consumption according to the optimized routing through clustering and increase the performance superior to the other clustering schemes.


Author(s):  
Fuseini Jibreel ◽  
Emmanuel Tuyishimire ◽  
I M Daabo

Wireless Sensor Networks (WSNs) continue to provide essential services for various applications such as surveillance, data gathering, and data transmission from the hazardous environments to safer destinations. This has been enhanced by the energy-efficient routing protocols that are mostly designed for such purposes. Gateway-based Energy-Aware Multi-hop Routing protocol (MGEAR) is one of the homogenous routing schemes that was recently designed to more efficiently reduce the energy consumption of distant nodes. However, it has been found that the protocol has a high energy consumption rate, lower stability period, less data transmission to the Base station (BS). In this paper, an enhanced Heterogeneous Gateway-based Energy-Aware multi-hop routing protocol ( HMGEAR) is proposed. The proposed routing scheme is based on the introduction of heterogeneous nodes in the existing scheme, selection of the head based on the residual energy, introduction of multi-hop communication strategy in all the regions of the network, and implementation of energy hole elimination technique. Results show that the proposed routing scheme outperforms two existing ones.


Sign in / Sign up

Export Citation Format

Share Document