scholarly journals Preparation, Characterization, and Insecticidal Activity of Avermectin-Grafted-Carboxymethyl Chitosan

2016 ◽  
Vol 2016 ◽  
pp. 1-8 ◽  
Author(s):  
Yan Li ◽  
Yukun Qin ◽  
Song Liu ◽  
Ronge Xing ◽  
Huahua Yu ◽  
...  
Keyword(s):  
Insecticidal Activity ◽  
Crop Protection ◽  
Carboxymethyl Chitosan ◽  
Esterification Reaction ◽  
Residual Rate ◽  
Black Bean ◽  
H Nmr ◽  
Lethal Rate ◽  
Technical Material ◽  
Ft Ir

Avermectin-grafted-N,O-carboxymethyl chitosan (NOCC) derivative was obtained by esterification reaction using dicyclohexylcarbodiimide (DCC) as dehydrating agent and 4-methylaminopyridine as catalyst. The structures of the conjugate were confirmed by FT-IR,1H NMR, and XRD. Insecticidal activities against armyworms, carmine spider mites, black bean aphids, and brown plant hoppers were investigated at concentrations ranging from 0.16 to 1000 mg/L. At the concentration of 1000 mg/L and 500 mg/L, the lethal rate was 100%. Good insecticidal activity at 4 mg/L was still shown, especially against the black bean aphids and brown plant hoppers. Moreover, the photostability of the conjugate was evaluated and showed an apparent improvement. At 300 mins, the residual rate of the conjugate was 11.22%, much higher than 0.2% of the avermectin technical material. The conjugate we developed showed potential for further study and application in crop protection.

1H-NMR Analysis of Degree of Substitution in N,O-Carboxymethyl Chitosans from Various Chitosan Sources and Types

2012 ◽  
Vol 506 ◽  
pp. 158-161 ◽  
Author(s):  
A. Jaidee ◽  
Pornchai Rachtanapun ◽  
S. Luangkamin
Keyword(s):  
Chemical Structure ◽  
Carboxymethyl Chitosan ◽  
Degree Of Substitution ◽  
Resonance Spectroscopy ◽  
Nmr Analysis ◽  
Reaction Conditions ◽  
H Nmr ◽  
Fourier Transformed Infrared Spectroscopy ◽  
Chitosan Oligomer ◽  
Ft Ir

N,O-Carboxymethyl chitosans were synthesized by the reaction between shrimp, crab and squid chitosans with monochloroacetic acid under basic conditions at 50°C. The mole ratio of reactants was obtained from various reaction conditions of shrimp chitosan polymer and oligomer types. The mole ratio 1:12:6 of chitosan:sodium hydroxide:monochloroacetic acid was used for preparing carboxymethyl of chitosan polymer types while carboxymethyl of chitosan oligomer types were used the mole ratio 1:6:3 of chitosan:sodium hydroxide:monochloroacetic acid. The chemical structure was analyzed by fourier transformed infrared spectroscopy (FT-IR) and proton nuclear magnatic resonance spectroscopy (1H-NMR). The FT-IR was used for confirm the insertion of carboxymethyl group on chitosan molecules. The 1H-NMR was used for determining the degree of substitution (DS) of carboxymethylation at hydroxyl and amino sites of chitosans. Carboxymethyl chitosan samples had the total DS of carboxymethylation ranging from 1.0-2.2. The highest of DS of carboxymethylation was from shrimp chitosan oligomer type.

scholarly journals Functionalization and Chemical Modification of 2-Hydroxyethyl Methacrylate with Carboxylic Acid

2012 ◽  
Vol 9 (3) ◽  
pp. 1135-1144 ◽  
Author(s):  
Mohammad Hossein Nasirtabrizi ◽  
L. Zargin ◽  
S. Khodabandlou ◽  
S. Rostamzadeh Mansour
Keyword(s):  
Thermal Analysis ◽  
Free Radical ◽  
Carboxylic Acid ◽  
Addition Reaction ◽  
Molar Ratio ◽  
Esterification Reaction ◽  
Hydroxyethyl Methacrylate ◽  
H Nmr ◽  
Temperature Ranges ◽  
Ft Ir

Free radical polymerization of the resulting monomers methyl methacrylate (MMA), ethyl methacrylate (EMA), methylacrylate (MA) and ethylacrylate (EA) with 2-hydroxyethyl methacrylate (HEMA) (in 1:1 mole ratio) were carried out using azobis(isoboutyronitrile) (AIBN) as initiator at the temperature ranges 60-70°C. The modification of polymers were carried out by 9-anthracenecarboxylic acid (9-ACA) via the esterification reaction between —OH of poly(HEMA) and —COOH of 9-ACA, in presence of N,N′-dicyclohexyl-carbodiimide (DCC), 4-(dimethylamino) pyridine (DMAP) and N,N-dimethyl formamid (DMF). It was found that the molar ratio acid/alcohol/catalysts= 0.02: 0.02: 0.02 and 0.002, optimal for preparation of the ester. As demonstrated by FT-IR,1H-NMR and dynamic mechanical thermal analysis (DMTA). The Tg value of methacrylate and acrylate copolymers containing 9-ACA groups was found to increase with incorporation of 9-ACA groups in polymer structures. The presence of 9-ACA groups in the polymer side chains created new polymers with novel modified properties that find some applications in polymer industry. These anthracenic factors could take part in cyclo addition reaction with other factors such as anhydrides and kinons.

scholarly journals Synthesis of Novel Pyrimethanil Grafted Chitosan Derivatives with Enhanced Antifungal Activity

2016 ◽  
Vol 2016 ◽  
pp. 1-8 ◽  
Author(s):  
Yan Li ◽  
Song Liu ◽  
Yukun Qin ◽  
Ronge Xing ◽  
Xiaolin Chen ◽  
...  
Keyword(s):  
Antifungal Activity ◽  
Synergistic Effect ◽  
Rhizoctonia Solani ◽  
Crop Protection ◽  
Pathogenic Fungi ◽  
Gibberella Zeae ◽  
Plant Pathogenic Fungi ◽  
H Nmr ◽  
Antifungal Properties ◽  
Ft Ir

In this study, three pyrimethanil grafted chitosan (PML-g-CS) derivatives were obtained. The structures of the conjugates were confirmed by FT-IR,1H NMR, and EA. The grafting ratios were measured by HPLC. Antifungal properties of pyrimethanil grafted chitosan (PML-g-CS) derivatives against the plant pathogenic fungiRhizoctonia solaniandGibberella zeaewere investigated at concentrations of 100, 200, and 400 mg/L. The PML-g-CS derivatives showed enhanced antifungal activity in comparison with chitosan. The PML-g-CS-1 showed the best antifungal activity againstR. solani, whose antifungal index was 58.32%. The PML-g-CS-2 showed the best antifungal activity againstG. zeae, whose antifungal index was 53.48%. The conjugation of chitosan and pyrimethanil showed synergistic effect. The PML-g-CS derivatives we developed showed potential for further study and application in crop protection.

scholarly journals Synthesis and antioxidant properties of 2-(3-(hydroxyimino)methyl)-1H-indol-1-yl)acetamide derivatives

2020 ◽  
Vol 6 (1) ◽  
Author(s):  
Chandravadivelu Gopi ◽  
Magharla Dasaratha Dhanaraju
Keyword(s):  
Antioxidant Activity ◽  
Condensation Reaction ◽  
Antioxidant Properties ◽  
Side Chain ◽  
Antioxidant Power ◽  
H Nmr ◽  
Antioxidant Agents ◽  
Phenyl Rings ◽  
Ferric Reducing Antioxidant Power ◽  
Ft Ir

Abstract Background The main aim of this work was to synthesise a novel N-(substituted phenyl)-2-(3-(hydroxyimino) methyl)-1H-indol-1-yl) acetamide derivatives and evaluate their antioxidant activity. These compounds were prepared by a condensation reaction between 1H-indole carbaldehyde oxime and 2-chloro acetamide derivatives. The newly synthesised compound structures were characterised by FT-IR, 1H-NMR, mass spectroscopy and elemental analysis. Furthermore, the above-mentioned compounds were screened for antioxidant activity by using ferric reducing antioxidant power (FRAP) and 1,1-diphenyl-2-picrylhydrazyl (DPPH) methods. Result The antioxidant activity result reveals that most of the compounds were exhibiting considerable activity in both methods and the values are very closer to the standards. Among the synthesised compounds, compound 3j, 3a and 3k were shown remarkable activity at low concentration. Conclusion Compounds 3j, 3a and 3k were shown highest activity among the prepared analogues due to the attachment of halogens connected at the appropriate place in the phenyl ring. Hence, these substituted phenyl rings considered as a perfect side chain for the indole nucleus for the development of the new antioxidant agents.

Ultrasound-assisted aqua-mediated synthesis of multi-substituted tetrahydropyridine-3-carboxylates using N-carboxymethyl-3-pyridinium hydrogensulfate ([N-CH2CO2H-3-pic]+HSO4−) as a new efficient ionic liquid catalyst

2021 ◽  
Vol 3 (6) ◽  
Author(s):  
Kobra Nikoofar ◽  
Fatemeh Shahriyari
Keyword(s):  
Ionic Liquid ◽  
Reaction Times ◽  
Aromatic Aldehydes ◽  
Environmentally Benign ◽  
H Nmr ◽  
Sonic Waves ◽  
Ft Ir ◽  
High Yields ◽  
Work Up ◽  
C Nmr

AbstractA simple, straightforward, and ultrasound-promoted method for the preparation of some highly functionalized tetrahydropyridines reported via pseudo five-component reaction of (hetero)aromatic aldehydes, different anilines, and alkyl acetoacetates in the presence of [N-CH2CO2H-3-pic]+HSO4−, as a novel ionic liquid, in green aqueous medium. The IL was synthesized utilizing simple and easily-handled substrates and characterized by FT-IR, 1H NMR, 13C NMR, GC-MASS, FESEM, EDX, and TGA/DTG techniques. The procedure contains some highlighted aspects which are: (a) performing the MCR in the presence of aqua and sonic waves, as two main important and environmentally benign indexes in green and economic chemistry, (b) high yields of products within short reaction times, (c) convenient work-up procedure, (d) preparing the new IL via simple substrates and procedure.

Liquid crystalline polyureas with oligo(ethylene glycol) sequences

e-Polymers ◽  
2010 ◽  
Vol 10 (1) ◽  
Author(s):  
Shahram Mehdipour-Ataei ◽  
Leila Akbarian-Feizi
Keyword(s):  
Liquid Crystalline ◽  
Spectroscopic Method ◽  
Polymerization Reaction ◽  
X Ray Diffraction ◽  
Subsequent Reaction ◽  
Scanning Calorimetry ◽  
Polar Solvents ◽  
X Ray ◽  
H Nmr ◽  
Ft Ir

AbstractA diamine monomer containing ester, amide and ether functional groups was prepared and its polymerization reaction with different diisocyanates to give main chain poly(ester amide ether urea)s was investigated. The monomer was synthesized via reaction of terephthaloyl chloride with 4-hydroxybenzoic acid and subsequent reaction of the resulted diacid with 1,8-diamino-3,6-dioxaoctane. The polymers were characterized by FT-IR and 1H-NMR spectroscopic method and elemental analysis. The resulting polymers exhibited excellent solubility in polar solvents. Crystallinity of the resulted polymers was evaluated by wide-angle X-ray diffraction (WXRD) method, and they exhibited semi-crystalline patterns. The glass transition temperatures (Tg) of the polymers determined by differential scanning calorimetry (DSC) and dynamic mechanical thermal analysis (DMTA) were in the range of 88-112 °C. The temperatures for 10% weight loss (T10) from their thermogravimetric analysis (TGA) curves were found to be in the range of 297-312 °C in air. Also the prepared polyureas showed liquid crystalline character.

scholarly journals Synthesis, Characterization, and Antimicrobial Activity of Methyl-2-aminopyridine-4-carboxylate Derivatives

2013 ◽  
Vol 2013 ◽  
pp. 1-5 ◽  
Author(s):  
S. Nagashree ◽  
P. Mallu ◽  
L. Mallesha ◽  
S. Bindya
Keyword(s):  
Antimicrobial Activity ◽  
Spectral Studies ◽  
H Nmr ◽  
Chemical Structures ◽  
Elemental Analyses ◽  
Ft Ir

A series of methyl-2-aminopyridine-4-carboxylate derivatives,3a–f,were synthesized in order to determine theirin vitroantimicrobial activity. The chemical structures of the synthesized compounds were confirmed by elemental analyses, FT-IR, and1H NMR spectral studies. Among the synthesized compounds,3cand3dshowed good antimicrobial activity compared to other compounds in the series.

Synthesis of biomass based plasticizer from linoleic acid and cardanol for preparing durable PVC material

2021 ◽  
Author(s):  
Hongying Chu ◽  
Huabei Li ◽  
Xiaoyan Sun ◽  
Yaowang Zhang
Keyword(s):  
Thermal Stability ◽  
Linoleic Acid ◽  
Chemical Structure ◽  
Dioctyl Phthalate ◽  
H Nmr ◽  
Plasticized Pvc ◽  
Migration Resistance ◽  
Ft Ir ◽  
And Migration ◽  
Thermal Stability Of

Abstract In this paper, we synthesized a kind of bio-based plasticizer epoxidized linoleic acid cardanol ester(ELCE) from cardanol and linoleic acid. Its chemical structure was characterized with FT-IR and 1H NMR. Polyvinyl chloride(PVC) blends plasticized with ELCE were prepared via thermoplastic blending with torque rheometer. The performance including torque, mechanical property, thermal stability, plasticizing property and migration resistance of plasticized PVC blends were investigated and compared with plasticized PVC blends with commercial plasticizer dioctyl phthalate(DOP). The results showed that ELCE improved thermal stability of PVC blends. ELCE played more excellent plasticizing effect on PVC blends than DOP. The better solvent extraction resistance and volatile resistance of ELCE make it impossible to completely replace DOP in PVC products.

Synthesis, Characterization and Solution Properties of Novel Cationic Ester-Based Gemini Surfactants

2019 ◽  
Vol 233 (5) ◽  
pp. 707-720 ◽  
Author(s):  
Manorama Panda ◽  
Nazish Fatma ◽  
Mohammad Kamil
Keyword(s):  
Gemini Surfactants ◽  
Alkyl Chain ◽  
Solution Properties ◽  
H Nmr ◽  
Surfactant Solutions ◽  
Cationic Gemini Surfactants ◽  
Ft Ir ◽  
M 12 ◽  
Dimeric Surfactant ◽  
Ft Ir Spectroscopy

Abstract The present investigation involves the synthesis of a series of novel green ethylene oxide-linked diester-functionalized cationic gemini surfactants 2,2′-[(oxybis(ethane-1,2-diyl))bis(oxy)]bis(N-alkyl-N,N-dimethyl-2-oxoethanaminium) dichloride (Cm-DEG-Cm; m = 12, 14, 16). These compounds were characterized by 1H-NMR, MS-ESI (+), FT-IR spectroscopy and elemental analysis; their solution properties were evaluated by surface tension and rheology measurements. The dimeric surfactant, Cm-DEG-Cm, possesses improved physicochemical properties as compared to its monomeric counterpart. Much lower critical micelle concentration (cmc) makes the cationic gemini surfactants more useful for the biomedical, pharmaceutical, industrial and academic sectors. Longer the alkyl chain of surfactants lower are the cmc values, the order is C16-DEG-C16 < C14-DEG-C14 < C12-DEG-C12. For all the three synthesized gemini surfactants no cloud point was noticed in between the temperatures 0 °C to 100 °C at the concentrations 0.002 mM, 0.02 mM and 0.2 mM of the aqueous surfactant solutions which is a beneficial factor for the use of these amphiphiles in various areas of application.

Enhanced Thermal Stability of Esterified Lignin in Different Solvent Mediums

2018 ◽  
Vol 9 (1) ◽  
pp. 39-49 ◽  
Author(s):  
Sharifah Nurul Ain Syed Hashim ◽  
Sarani Zakaria ◽  
Chin Hua Chia ◽  
Sharifah Nabihah Syed Jaafar
Keyword(s):  
Thermal Stability ◽  
Alkaline Solution ◽  
Room Temperature ◽  
Hydroxyl Groups ◽  
Aqueous Alkaline Solution ◽  
Alkali Lignin ◽  
Weight Percentage ◽  
H Nmr ◽  
Ft Ir ◽  
Thermal Stability Of

In this study, soda alkali lignin from oil palm empty fruit bunch (EFB-AL) and kenaf core (KC-AL) are esterified with maleic anhydride under two different conditions, namely i) pyridine at temperature of 120°C for 3h and ii) aqueous alkaline solution at room temperature for 4h. As a result, the weight percentage gain (WPG) of the esterified EFB-AL (EFB-EL) and esterified KC-AL (KC-EL) in pyridine demonstrated a higher compared to aqueous alkaline solution. The FT-IR results of EFB-EL and KC-EL in both solvents exhibited some changes at the carbonyl and hydroxyl groups. Furthermore, the esterification process induced the carboxylic peak to appear in both alkali lignin samples. The outcome is confirmed by conducting H-NMR analysis, which demonstrated ester and carboxylic acid peaks within the spectral analysis. Finally, the TGA results showed both EFB-EL and KC-EL that are exposed to aqueous alkaline actually possessed better thermal stability and higher activation energy (Ea) compared to the esterified samples in pyridine.

Sign in / Sign up

Export Citation Format

Share Document