scholarly journals Dynamic Response of Wheel-Rail Interaction at Rail Weld in High-Speed Railway

2017 ◽  
Vol 2017 ◽  
pp. 1-11 ◽  
Author(s):  
Boyang An ◽  
Ping Wang ◽  
Jieling Xiao ◽  
Jingmang Xu ◽  
Rong Chen
Keyword(s):  
Dynamic Response ◽  
High Speed ◽  
Element Model ◽  
Short Wave ◽  
Rolling Contact ◽  
High Speed Railway ◽  
Quantitative Expression ◽  
High Frequency Excitation ◽  
Frequency Excitation ◽  
Continuously Welded Rail

As a main part of continuously welded rail track, rail weld widely exists in high-speed railway. However, short-wave irregularities can easily initiate and develop in rail weld due to the limitation of welding technology and thus rail weld has been a main high-frequency excitation and is responsible for deterioration of track components. This work reports a 3D finite element model of wheel-rail rolling contact which can simulate dynamic wheel-rail interaction at arbitrary contact geometry up to 400 km/h. This model is employed to investigate dynamic response of wheel-rail interaction at theoretical and measured rail weld, including wheel-rail force and axle-box acceleration. These simulation results, combined with Quality Index (QI) method, are used to develop a quantitative expression, which can be easily applied for evaluating rail weld deterioration based on measured rail profiles and axle-box acceleration.

PFC’s Application on the Dynamic Response Analysis of High Speed Railway Ballastless Subgrade

2014 ◽  
Vol 505-506 ◽  
pp. 9-14
Author(s):  
Li Jing Wen He ◽  
Quan Mei Gong
Keyword(s):  
Dynamic Response ◽  
High Speed ◽  
Goodness Of Fit ◽  
Bottom Layer ◽  
Element Model ◽  
Particle Flow Code ◽  
Response Analysis ◽  
Biaxial Test ◽  
High Speed Railway ◽  
Ballastless Track

The biaxial test on ballastless track subgrade material of surface layer and bottom layer of subgrade was established using the particle flow code(PFC). Based on the micro parameter gotten from the biaxial test, a two-dimensional discrete element model of slab Ballastless Track subgrade is modeled. The dynamic response under dynamic load was calculated. A comparison of simulation results and the field measured data shows goodness of fit which provides a new way of simulation on dynamic response of high speed railway subgrade.

scholarly journals The Influence of an Integration Time Step on Dynamic Calculation of a Vehicle-Track-Bridge under High-Speed Railway

Mathematics ◽  
2021 ◽  
Vol 9 (4) ◽  
pp. 431
Author(s):  
Junjie Ye ◽  
Hao Sun
Keyword(s):  
High Speed ◽  
Coupled Model ◽  
Short Wave ◽  
Integration Time ◽  
Vertical Acceleration ◽  
Dynamic Calculation ◽  
Time Step ◽  
High Speed Railway ◽  
Track Irregularity ◽  
Track Bridge

In order to study the influence of an integration time step on dynamic calculation of a vehicle-track-bridge under high-speed railway, a vehicle-track-bridge (VTB) coupled model is established. The influence of the integration time step on calculation accuracy and calculation stability under different speeds or different track regularity states is studied. The influence of the track irregularity on the integration time step is further analyzed by using the spectral characteristic of sensitive wavelength. According to the results, the disparity among the effect of the integration time step on the calculation accuracy of the VTB coupled model at different speeds is very small. Higher speed requires a smaller integration time step to keep the calculation results stable. The effect of the integration time step on the calculation stability of the maximum vertical acceleration of each component at different speeds is somewhat different, and the mechanism of the effect of the integration time step on the calculation stability of the vehicle-track-bridge coupled system is that corresponding displacement at the integration time step is different. The calculation deviation of the maximum vertical acceleration of the car body, wheel-sets and bridge under the track short wave irregularity state are greatly increased compared with that without track irregularity. The maximum vertical acceleration of wheel-sets, rails, track slabs and the bridge under the track short wave irregularity state all show a significant declining trend. The larger the vibration frequency is, the smaller the range of integration time step is for dynamic calculation.

Effect of rail pad stiffness on the wheel/rail force intensity in a railway slab track with short-wave irregularity

2019 ◽  
Vol 233 (10) ◽  
pp. 1038-1049 ◽  
Author(s):  
Amin Khajehdezfuly
Keyword(s):  
High Frequency ◽  
Critical Speed ◽  
Concrete Slab ◽  
Low Frequency ◽  
Short Wave ◽  
Vehicle Speed ◽  
Frequency Range ◽  
Slab Track ◽  
High Frequency Excitation ◽  
Frequency Excitation

In this paper, a two-dimensional numerical model is developed to investigate the effect of rail pad stiffness on the wheel/rail force in a slab track with harmonic irregularity. The model consists of a vehicle, nonlinear Hertz spring, rail, rail pad, concrete slab, resilient layer, concrete base, and subgrade. The rail is simulated using the Timoshenko beam element for considering the effects of high-frequency excitation produced by short-wave irregularity. The results obtained from the model are compared with those available in the literature and from the field to prove the validity of the model. Through a parametric study, the effect of variations in rail pad stiffness, vehicle speed, and harmonic irregularity on the wheel/rail force is investigated. For the slab track without any irregularity, the wheel/rail force is at maximum when the vehicle speed reaches the critical speed. As the rail pad stiffness increases, the critical speed increases. When the amplitude of irregularity is high, wheel jumping phenomenon may occur. In this situation, as the vehicle speed and rail pad stiffness are increased, the dynamic wheel/rail force is increased. In the low-frequency range, the wheel/rail force increases as the rail pad stiffness increases. In the high-frequency range, the wheel/rail force increases as the rail pad stiffness is decreased.

scholarly journals Effect of Bridge-Pier Differential Settlement on the Dynamic Response of a High-Speed Railway Train-Track-Bridge System

2017 ◽  
Vol 2017 ◽  
pp. 1-13 ◽  
Author(s):  
Xiaohui Zhang ◽  
Yao Shan ◽  
Xinwen Yang
Keyword(s):  
Dynamic Response ◽  
High Speed ◽  
Tensile Force ◽  
Differential Settlement ◽  
Bridge Pier ◽  
Vertical Acceleration ◽  
Train Track ◽  
Allowable Limit ◽  
High Speed Railway ◽  
Track Bridge

A model based on the theory of train-track-bridge coupling dynamics is built in the article to investigate how high-speed railway bridge pier differential settlement can affect various railway performance-related criteria. The performance of the model compares favorably with that of a 3D finite element model and train-track-bridge numerical model. The analysis of the study demonstrates that all the dynamic response for a span of 24 m is slightly larger than that for a span of 32 m. The wheel unloading rate increases with pier differential settlement for all of the calculation conditions considered, and its maximum value of 0.695 is well below the allowable limit. Meanwhile, the vertical acceleration increases with pier differential settlement and train speed, respectively, and the values for a pier differential settlement of 10 mm and speed of 350 km/h exceed the maximum allowable limit stipulated in the Chinese standards. On this basis, a speed limit for the exceeding pier differential settlement is determined for comfort consideration. Fasteners that had an initial tensile force due to pier differential settlement experience both compressive and tensile forces as the train passes through and are likely to have a lower service life than those which solely experience compressive forces.

Quick assessment of high-speed railway bridges based on a non-dimensional parameter representation

2017 ◽  
Vol 20 (11) ◽  
pp. 1623-1631 ◽  
Author(s):  
Patrick Salcher ◽  
Christoph Adam
Keyword(s):  
Dynamic Response ◽  
High Speed ◽  
Response Assessment ◽  
Engineering Practice ◽  
Characteristic Parameters ◽  
Dimensional Parameter ◽  
High Speed Railway ◽  
Railway Bridges ◽  
Parameter Representation ◽  
Bridge Model

The objective of this study is to provide the engineering practice with a tool for simplified dynamic response assessment of high-speed railway bridges in the pre-design phase. To serve this purpose, a non-dimensional representation of the characteristic parameters of the train–bridge interaction problem is described and extended based on a beam bridge model subjected to the static axle loads of the crossing high-speed train. The non-dimensional parameter representation is used to discuss several code-related design issues. It is revealed that in an admitted parameter domain, a code-regulated static assessment of high-speed railway bridges may under-predict the actual dynamic response. Furthermore, the minimum mass of a bridge as a function of the characteristic parameters is presented to comply with the maximum bridge acceleration specified in standards.

Sign in / Sign up

Export Citation Format

Share Document