scholarly journals A Natural Diffusion Distance and Equivalence of Local Convergence and Local Equicontinuity for a General Symmetric Diffusion Semigroup

2018 ◽  
Vol 2018 ◽  
pp. 1-9 ◽  
Author(s):  
Maxim J. Goldberg ◽  
Seonja Kim

In this paper, we consider a general symmetric diffusion semigroup Ttft≥0 on a topological space X with a positive σ-finite measure, given, for t>0, by an integral kernel operator: Ttf(x)≜∫X‍ρt(x,y)f(y)dy. As one of the contributions of our paper, we define a diffusion distance whose specification follows naturally from imposing a reasonable Lipschitz condition on diffused versions of arbitrary bounded functions. We next show that the mild assumption we make, that balls of positive radius have positive measure, is equivalent to a similar, and an even milder looking, geometric demand. In the main part of the paper, we establish that local convergence of Ttf to f is equivalent to local equicontinuity (in t) of the family Ttft≥0. As a corollary of our main result, we show that, for t0>0, Tt+t0f converges locally to Tt0f, as t converges to 0+. In the Appendix, we show that for very general metrics D on X, not necessarily arising from diffusion, ∫X‍ρt(x,y)D(x,y)dy→0  a.e., as t→0+. R. Coifman and W. Leeb have assumed a quantitative version of this convergence, uniformly in x, in their recent work introducing a family of multiscale diffusion distances and establishing quantitative results about the equivalence of a bounded function f being Lipschitz, and the rate of convergence of Ttf to f, as t→0+. We do not make such an assumption in the present work.

2002 ◽  
Vol 17 (20) ◽  
pp. 2769-2769
Author(s):  
B. C. NOLAN

We revisit the problem of the development of singularities in the gravitational collapse of an inhomogeneous dust sphere. As shown by Yodzis et al1, naked singularities may occur at finite radius where shells of dust cross one another. These singularities are gravitationally weak 2, and it has been claimed that at these singularities, the metric may be written in continuous form 2, with locally L∞ connection coefficients 3. We correct these claims, and show how the field equations may be reformulated as a first order, quasi-linear, non-conservative, non-strictly hyperbolic system. We discuss existence and uniqueness of generalized solutions of this system using bounded functions of bounded variation (BV) 4, where the product of a BV function and the derivative of another BV function may be interpreted as a locally finite measure. The solutions obtained provide a dynamical extension to the future of the singularity.


2019 ◽  
Vol 18 (03) ◽  
pp. 359-383
Author(s):  
L. Agud ◽  
J. M. Calabuig ◽  
E. A. Sánchez Pérez

Let [Formula: see text] be a finite measure space and consider a Banach function space [Formula: see text]. Motivated by some previous papers and current applications, we provide a general framework for representing reproducing kernel Hilbert spaces as subsets of Köthe–Bochner (vector-valued) function spaces. We analyze operator-valued kernels [Formula: see text] that define integration maps [Formula: see text] between Köthe–Bochner spaces of Hilbert-valued functions [Formula: see text] We show a reduction procedure which allows to find a factorization of the corresponding kernel operator through weighted Bochner spaces [Formula: see text] and [Formula: see text] — where [Formula: see text] — under the assumption of [Formula: see text]-concavity of [Formula: see text] Equivalently, a new kernel obtained by multiplying [Formula: see text] by scalar functions can be given in such a way that the kernel operator is defined from [Formula: see text] to [Formula: see text] in a natural way. As an application, we prove a new version of Mercer Theorem for matrix-valued weighted kernels.


Author(s):  
UN CIG JI ◽  
KALYAN B. SINHA

A stochastic integral representation in terms of generalized integral kernel operator is proved for a wide class of quantum martingales which includes regular martingales and the martingales determined by the second quantization of integral operators containing singular kernels.


1975 ◽  
Vol 18 (4) ◽  
pp. 475-478
Author(s):  
A. N. Al-Hussaini

Let (Ω, α, μ) be a σ-finite measure space. By Lp(Ω, α, μ) or Lp for short we denote the usual Banach space of pth power μ-integrable functions on Ω if 1≤p<+ ∞ and μ-essentially bounded functions on Ω, if p= +∞. In section (2) we characterize conditional expectation, by a method different than those used previously. Modulus of a given contraction is discussed in section (3). If the given contraction has a fixed point, then its modulus has a simple form (theorem 3.2).


2014 ◽  
Vol 2014 ◽  
pp. 1-6
Author(s):  
Brian Jefferies

A bounded linear operator T on a Hilbert space ℋ is trace class if its singular values are summable. The trace class operators on ℋ form an operator ideal and in the case that ℋ is finite-dimensional, the trace tr(T) of T is given by ∑jajj for any matrix representation {aij} of T. In applications of trace class operators to scattering theory and representation theory, the subject is complicated by the fact that if k is an integral kernel of the operator T on the Hilbert space L2(μ) with μ a σ-finite measure, then k(x,x) may not be defined, because the diagonal {(x,x)} may be a set of (μ⊗μ)-measure zero. The present note describes a class of linear operators acting on a Banach function space X which forms a lattice ideal of operators on X, rather than an operator ideal, but coincides with the collection of hermitian positive trace class operators in the case of X=L2(μ).


Author(s):  
C. Colliex ◽  
P. Trebbia

The physical foundations for the use of electron energy loss spectroscopy towards analytical purposes, seem now rather well established and have been extensively discussed through recent publications. In this brief review we intend only to mention most recent developments in this field, which became available to our knowledge. We derive also some lines of discussion to define more clearly the limits of this analytical technique in materials science problems.The spectral information carried in both low ( 0<ΔE<100eV ) and high ( >100eV ) energy regions of the loss spectrum, is capable to provide quantitative results. Spectrometers have therefore been designed to work with all kinds of electron microscopes and to cover large energy ranges for the detection of inelastically scattered electrons (for instance the L-edge of molybdenum at 2500eV has been measured by van Zuylen with primary electrons of 80 kV). It is rather easy to fix a post-specimen magnetic optics on a STEM, but Crewe has recently underlined that great care should be devoted to optimize the collecting power and the energy resolution of the whole system.


Author(s):  
J.P. Fallon ◽  
P.J. Gregory ◽  
C.J. Taylor

Quantitative image analysis systems have been used for several years in research and quality control applications in various fields including metallurgy and medicine. The technique has been applied as an extension of subjective microscopy to problems requiring quantitative results and which are amenable to automatic methods of interpretation.Feature extraction. In the most general sense, a feature can be defined as a portion of the image which differs in some consistent way from the background. A feature may be characterized by the density difference between itself and the background, by an edge gradient, or by the spatial frequency content (texture) within its boundaries. The task of feature extraction includes recognition of features and encoding of the associated information for quantitative analysis.Quantitative Analysis. Quantitative analysis is the determination of one or more physical measurements of each feature. These measurements may be straightforward ones such as area, length, or perimeter, or more complex stereological measurements such as convex perimeter or Feret's diameter.


2019 ◽  
Vol 28 (3) ◽  
pp. 660-672
Author(s):  
Suzanne H. Kimball ◽  
Toby Hamilton ◽  
Erin Benear ◽  
Jonathan Baldwin

Purpose The purpose of this study was to evaluate the emotional tone and verbal behavior of social media users who self-identified as having tinnitus and/or hyperacusis that caused self-described negative consequences on daily life or health. Research Design and Method An explanatory mixed-methods design was utilized. Two hundred “initial” and 200 “reply” Facebook posts were collected from members of a tinnitus group and a hyperacusis group. Data were analyzed via the LIWC 2015 software program and compared to typical bloggers. As this was an explanatory mixed-methods study, we used qualitative thematic analyses to explain, interpret, and illustrate the quantitative results. Results Overall, quantitative results indicated lower overall emotional tone for all categories (tinnitus and hyperacusis, initial and reply), which was mostly influenced by higher negative emotion. Higher levels of authenticity or truth were found in the hyperacusis sample but not in the tinnitus sample. Lower levels of clout (social standing) were indicated in all groups, and a lower level of analytical thinking style (concepts and complex categories rather than narratives) was found in the hyperacusis sample. Additional analysis of the language indicated higher levels of sadness and anxiety in all groups and lower levels of anger, particularly for initial replies. These data support prior findings indicating higher levels of anxiety and depression in this patient population based on the actual words in blog posts and not from self-report questionnaires. Qualitative results identified 3 major themes from both the tinnitus and hyperacusis texts: suffering, negative emotional tone, and coping strategies. Conclusions Results from this study suggest support for the predominant clinical view that patients with tinnitus and hyperacusis have higher levels of anxiety and depression than the general population. The extent of the suffering described and patterns of coping strategies suggest clinical practice patterns and the need for research in implementing improved practice plans.


1976 ◽  
Vol 36 (02) ◽  
pp. 430-440 ◽  
Author(s):  
A Marmur ◽  
E Ruckenstein ◽  
S. R Rakower

SummaryA model is suggested which assumes that the rate of deposition of cells is determined both by hydrodynamic factors and by Brownian motion over the potential barrier caused by London and double-layer forces in the immediate vicinity of the deposition surface. The height of the barrier in the potential energy of interaction between blood cells and various surfaces is analyzed in relation to the physical properties of the cells, surfaces, and solutions. Based on this analysis, the adhesion of platelets to injured blood vessel walls and to non-biologic materials, the lack of adhesion of red blood cells under the same conditions, the mechanism of ADP induced aggregation and the interaction with blood flow are explained. The qualitative predictions of the model are substantiated by available experimental information. Quantitative results are presented in terms of a time constant, which typifies a period of contact with a surface, during which appreciable deposition occurs.


Sign in / Sign up

Export Citation Format

Share Document