scholarly journals Landslide Susceptibility Mapping in Darjeeling Himalayas, India

2018 ◽  
Vol 2018 ◽  
pp. 1-17 ◽  
Author(s):  
Amit Chawla ◽  
Sowmiya Chawla ◽  
Srinivas Pasupuleti ◽  
A. C. S. Rao ◽  
Kripamoy Sarkar ◽  
...  
Keyword(s):  
Information System ◽  
Geographic Information System ◽  
Landslide Susceptibility ◽  
Remote Sensing Data ◽  
Geographic Information ◽  
Landslide Susceptibility Mapping ◽  
Support Vector ◽  
Susceptibility Map ◽  
Landslide Susceptibility Map ◽  
Swarm Optimization

Landslide susceptibility map aids decision makers and planners for the prevention and mitigation of landslide hazard. This study presents a methodology for the generation of landslide susceptibility mapping using remote sensing data and Geographic Information System technique for the part of the Darjeeling district, Eastern Himalaya, in India. Topographic, earthquake, and remote sensing data and published geology, soil, and rainfall maps were collected and processed using Geographic Information System. Landslide influencing factors in the study area are drainage, lineament, slope, rainfall, earthquake, lithology, land use/land cover, fault, valley, soil, relief, and aspect. These factors were evaluated for the generation of thematic data layers. Numerical weight and rating for each factor was assigned using the overlay analysis method for the generation of landslide susceptibility map in the Geographic Information System environment. The resulting landslide susceptibility zonation map demarcated the study area into four different susceptibility classes: very high, high, moderate, and low. Particle Swarm Optimization-Support Vector Machine technique was used for the prediction and classification of landslide susceptibility classes, and Genetic Programming method was used to generate models and to predict landslide susceptibility classes in conjunction with Geographic Information System output, respectively. Genetic Programming and Particle Swarm Optimization-Support Vector Machine have performed well with respect to overall prediction accuracy and validated the landslide susceptibility model generated in the Geographic Information System environment. The efficiency of the landslide susceptibility zonation map was also confirmed by correlating the landslide frequency between different susceptible classes.

scholarly journals Landslide susceptibility mapping by using a geographic information system (GIS) along the China–Pakistan Economic Corridor (Karakoram Highway), Pakistan

2019 ◽  
Vol 19 (5) ◽  
pp. 999-1022 ◽  
Author(s):  
Sajid Ali ◽  
Peter Biermanns ◽  
Rashid Haider ◽  
Klaus Reicherter
Keyword(s):  
Information System ◽  
Geographic Information System ◽  
Landslide Susceptibility ◽  
Slope Angle ◽  
Active Faults ◽  
Geographic Information ◽  
Susceptibility Mapping ◽  
Landslide Susceptibility Mapping ◽  
Susceptibility Map ◽  
Karakoram Highway

Abstract. The Karakoram Highway (KKH) is an important route, which connects northern Pakistan with Western China. Presence of steep slopes, active faults and seismic zones, sheared rock mass, and torrential rainfall make the study area a unique geohazards laboratory. Since its construction, landslides constitute an appreciable threat, having blocked the KKH several times. Therefore, landslide susceptibility mapping was carried out in this study to support highway authorities in maintaining smooth and hazard-free travelling. Geological and geomorphological data were collected and processed using a geographic information system (GIS) environment. Different conditioning and triggering factors for landslide occurrences were considered for preparation of the susceptibility map. These factors include lithology, seismicity, rainfall intensity, faults, elevation, slope angle, aspect, curvature, land cover and hydrology. According to spatial and statistical analyses, active faults, seismicity and slope angle mainly control the spatial distribution of landslides. Each controlling parameter was assigned a numerical weight by utilizing the analytic hierarchy process (AHP) method. Additionally, the weighted overlay method (WOL) was employed to determine landslide susceptibility indices. As a result, the landslide susceptibility map was produced. In the map, the KKH was subdivided into four different susceptibility zones. Some sections of the highway fall into high to very high susceptibility zones. According to results, active faults, slope gradient, seismicity and lithology have a strong influence on landslide events. Credibility of the map was validated by landslide density analysis (LDA) and receiver operator characteristics (ROC), yielding a predictive accuracy of 72 %, which is rated as satisfactory by previous researchers.

scholarly journals Landslide Susceptibility Mapping Using the Slope Unit for Southeastern Helong City, Jilin Province, China: A Comparison of ANN and SVM

Symmetry ◽  
2020 ◽  
Vol 12 (6) ◽  
pp. 1047 ◽  
Author(s):  
Chenglong Yu ◽  
Jianping Chen
Keyword(s):  
Influencing Factors ◽  
Landslide Susceptibility ◽  
Jilin Province ◽  
Landslide Susceptibility Mapping ◽  
Support Vector ◽  
Susceptibility Map ◽  
Landslide Susceptibility Map ◽  
Slope Unit ◽  
Svm Model ◽  
Very High

The purpose of this study is to produce a landslide susceptibility map of Southeastern Helong City, Jilin Province, Northeastern China. According to the geological hazard survey (1:50,000) project of Helong city, a total of 83 landslides were mapped in the study area. The slope unit, which is classified based on the curvature watershed method, is selected as the mapping unit. Based on field investigations and previous studies, three groups of influencing Factors—Lithological factors, topographic factors, and geological environment factors (including ten influencing factors)—are selected as the influencing factors. Artificial neural networks (ANN’s) and support vector machines (SVM’s) are introduced to build the landslide susceptibility model. Five-fold cross-validation, the receiver operating characteristic curve, and statistical parameters are used to optimize model. The results show that the SVM model is the optimal model. The landslide susceptibility maps produced using the SVM model are classified into five grades—very high, high, moderate, low, and very low—and the areas of the five grades were 127.43, 151.60, 198.77, 491.19, and 506.91 km2, respectively. The very high and high susceptibility areas included 79.52% of the total landslides, demonstrating that the landslide susceptibility map produced in this paper is reasonable. Consequently, this study can serve as a guide for landslide prevention and for future land planning in the southeast of Helong city.

scholarly journals A Novel Hybrid Method for Landslide Susceptibility Mapping-Based GeoDetector and Machine Learning Cluster: A Case of Xiaojin County, China

2021 ◽  
Vol 10 (2) ◽  
pp. 93
Author(s):  
Wei Xie ◽  
Xiaoshuang Li ◽  
Wenbin Jian ◽  
Yang Yang ◽  
Hongwei Liu ◽  
...  
Keyword(s):  
Machine Learning ◽  
Hybrid Method ◽  
Roc Curve ◽  
Landslide Susceptibility ◽  
Susceptibility Mapping ◽  
Assessment Model ◽  
Landslide Susceptibility Mapping ◽  
Support Vector ◽  
Susceptibility Map ◽  
Area Index

Landslide susceptibility mapping (LSM) could be an effective way to prevent landslide hazards and mitigate losses. The choice of conditional factors is crucial to the results of LSM, and the selection of models also plays an important role. In this study, a hybrid method including GeoDetector and machine learning cluster was developed to provide a new perspective on how to address these two issues. We defined redundant factors by quantitatively analyzing the single impact and interactive impact of the factors, which was analyzed by GeoDetector, the effect of this step was examined using mean absolute error (MAE). The machine learning cluster contains four models (artificial neural network (ANN), Bayesian network (BN), logistic regression (LR), and support vector machines (SVM)) and automatically selects the best one for generating LSM. The receiver operating characteristic (ROC) curve, prediction accuracy, and the seed cell area index (SCAI) methods were used to evaluate these methods. The results show that the SVM model had the best performance in the machine learning cluster with the area under the ROC curve of 0.928 and with an accuracy of 83.86%. Therefore, SVM was chosen as the assessment model to map the landslide susceptibility of the study area. The landslide susceptibility map demonstrated fit with landslide inventory, indicated the hybrid method is effective in screening landslide influences and assessing landslide susceptibility.

scholarly journals Incorporating Landslide Spatial Information and Correlated Features among Conditioning Factors for Landslide Susceptibility Mapping

2021 ◽  
Vol 13 (11) ◽  
pp. 2166
Author(s):  
Xin Yang ◽  
Rui Liu ◽  
Mei Yang ◽  
Jingjue Chen ◽  
Tianqiang Liu ◽  
...  
Keyword(s):  
Land Use ◽  
Hybrid Model ◽  
Landslide Susceptibility ◽  
Spatial Information ◽  
Landslide Susceptibility Mapping ◽  
Ratio Method ◽  
Support Vector ◽  
Susceptibility Map ◽  
Conditioning Factors ◽  
Proposed Model

This study proposed a new hybrid model based on the convolutional neural network (CNN) for making effective use of historical datasets and producing a reliable landslide susceptibility map. The proposed model consists of two parts; one is the extraction of landslide spatial information using two-dimensional CNN and pixel windows, and the other is to capture the correlated features among the conditioning factors using one-dimensional convolutional operations. To evaluate the validity of the proposed model, two pure CNN models and the previously used methods of random forest and a support vector machine were selected as the benchmark models. A total of 621 earthquake-triggered landslides in Ludian County, China and 14 conditioning factors derived from the topography, geological, hydrological, geophysical, land use and land cover data were used to generate a geospatial dataset. The conditioning factors were then selected and analyzed by a multicollinearity analysis and the frequency ratio method. Finally, the trained model calculated the landslide probability of each pixel in the study area and produced the resultant susceptibility map. The results indicated that the hybrid model benefitted from the features extraction capability of the CNN and achieved high-performance results in terms of the area under the receiver operating characteristic curve (AUC) and statistical indices. Moreover, the proposed model had 6.2% and 3.7% more improvement than the two pure CNN models in terms of the AUC, respectively. Therefore, the proposed model is capable of accurately mapping landslide susceptibility and providing a promising method for hazard mitigation and land use planning. Additionally, it is recommended to be applied to other areas of the world.

Sign in / Sign up

Export Citation Format

Share Document