scholarly journals Fast Cylindrical Fitting Method Using Point Cloud’s Normals Estimation

2018 ◽  
Vol 2018 ◽  
pp. 1-7 ◽  
Author(s):  
Yunlong Wu ◽  
Qing Zhang ◽  
Shuxuan Zhang
Keyword(s):  
Coordinate Transformation ◽  
Point Cloud ◽  
Laser Scanning ◽  
Least Squares Method ◽  
Three Dimensional ◽  
Essential Step ◽  
Initial Values ◽  
Fitting Method ◽  
Marquardt Algorithm ◽  
Levenberg Marquardt

Cylindrical fitting is an essential step in Large Process Pipeline’s measurement process, and precision of initial values of cylindrical fitting is a key element in getting a correct fitting result. In order to get well initial values, covariance matrixes of all points in cylinder’s three-dimensional laser scanning point cloud should be firstly established to estimate normals of all points, and then cylinder’s axis vector can be calculated by using least squares method. Secondly, remaining parameters’ initial values of the cylinder can be got by coordinate transformation. Finally, Levenberg-Marquardt algorithm is used in iterative optimization process to get fitting result by using the above values as initial values. Experiments demonstrate that this method can get precise initial values of cylindrical fitting and improve the accuracy and speed of cylindrical fitting.

THE USING OF TERRESTRIAL LASER (POINT CLOUD) SCANNING TECHNOLOGIES ON URBAN SCALE: EXAMPLE OF THE HISTORICAL URBAN TEXTURE OF LAPSEKİ

2021 ◽  
Vol 0 (23) ◽  
pp. 0-0
Author(s):  
Hatice Çiğdem ZAĞRA ◽  
Sibel ÖZDEN
Keyword(s):  
Point Cloud ◽  
Laser Scanning ◽  
Three Dimensional ◽  
Terrestrial Laser Scanning ◽  
Traditional Methods ◽  
Life Project ◽  
Three Dimensional Models ◽  
Architectural Restoration ◽  
Cloud Technologies ◽  
Orthophoto Images

Aim: This study aims to comparatively evaluate the use potential of orthophoto images obtained by terrestrial laser scanning technologies on an urban scale through the "Old Lapseki Finds Life Project" prepared using terrestrial laser scanning technologies and the "Enez Historical City Square Project" prepared using traditional methods. Method: In the study, street improvement projects of 29.210 m2 Lapseki and 29.214 m2 Enez city designed on an urban scale were evaluated and compared with descriptive statistics based on different parameters. Results: In the study, it has been determined that terrestrial laser (point cloud) technologies are 99,9% accurate when compared to traditional methods, save time by 83,08% and reduce workforce by 80%. In addition, it has been determined that terrestrial laser scanning technologies accelerate project processes compared to traditional methods. Conclusion: In this study, the use of laser scanning technologies, which are basically reverse engineering applications, in architectural restoration projects, determination of the current situation and damage, architectural documentation of structures and preparation of three-dimensional models, in terms of efficiency in survey studies are evaluated. It has been observed that orthophoto images obtained by terrestrial laser scanning technologies in architectural relief-restoration-restitution projects have potentials' worth using in different stages of the project.

scholarly journals Network method for deformation analysis of three-dimensional point cloud with terrestrial laser scanning sensor

2018 ◽  
Vol 14 (11) ◽  
pp. 155014771881413 ◽  
Author(s):  
Xiangyang Xu ◽  
Hao Yang
Keyword(s):  
Point Cloud ◽  
Laser Scanning ◽  
Three Dimensional ◽  
Terrestrial Laser Scanning ◽  
Deformation Analysis ◽  
Transverse Displacement ◽  
Displacement Analysis ◽  
Accuracy Measurement ◽  
Network Method ◽  
Displacement Information

The complexity of structural materials is increasing the importance of the technology for high accuracy measurement. How to obtain the displacement information of structural feature points accurately and efficiently is the key issue of deformation analysis. In this article, displacement analysis of a composite arched structure is investigated based on the terrestrial laser scanning technique. A new method based on the measured point cloud is proposed to analyze the displacement of surficial points, resulting in not only the displacement size but also the displacement direction. The innovation lies in extracting the displacement information with a network and remapped point cloud, which is called the network method. The displacement map obtained demonstrates that the transverse displacement in the experiment plays an important role in the safety of the structure, which could not be observed and obtained by the surface approximation method. Therefore, the panorama- and pointwise displacement analysis technologies contribute to ensure the safety of increasingly complex constructions.

scholarly journals VISUALIZATION OF THE CONSTRUCTION OF ANCIENT ROMAN BUILDINGS IN OSTIA USING POINT CLOUD DATA

2017 ◽  
Vol XLII-2/W3 ◽  
pp. 345-352
Author(s):  
Y. Hori ◽  
T. Ogawa
Keyword(s):  
Point Cloud ◽  
Laser Scanning ◽  
Feature Matching ◽  
Three Dimensional ◽  
Point Clouds ◽  
Final Report ◽  
Point Cloud Data ◽  
Cloud Data ◽  
Coverage Accuracy ◽  
New Research

The implementation of laser scanning in the field of archaeology provides us with an entirely new dimension in research and surveying. It allows us to digitally recreate individual objects, or entire cities, using millions of three-dimensional points grouped together in what is referred to as "point clouds". In addition, the visualization of the point cloud data, which can be used in the final report by archaeologists and architects, should usually be produced as a JPG or TIFF file. Not only the visualization of point cloud data, but also re-examination of older data and new survey of the construction of Roman building applying remote-sensing technology for precise and detailed measurements afford new information that may lead to revising drawings of ancient buildings which had been adduced as evidence without any consideration of a degree of accuracy, and finally can provide new research of ancient buildings. We used laser scanners at fields because of its speed, comprehensive coverage, accuracy and flexibility of data manipulation. Therefore, we “skipped” many of post-processing and focused on the images created from the meta-data simply aligned using a tool which extended automatic feature-matching algorithm and a popular renderer that can provide graphic results.

scholarly journals Mobile Laser Scanning Data for the Evaluation of Pavement Surface Distress

2020 ◽  
Vol 12 (6) ◽  
pp. 942 ◽  
Author(s):  
Maria Rosaria De Blasiis ◽  
Alessandro Di Benedetto ◽  
Margherita Fiani
Keyword(s):  
Point Cloud ◽  
Laser Scanning ◽  
Road Traffic ◽  
Single Point ◽  
Three Dimensional ◽  
Point Clouds ◽  
Road Surface ◽  
Important Indicator ◽  
The Road ◽  
Laser Systems

The surface conditions of road pavements, including the occurrence and severity of distresses present on the surface, are an important indicator of pavement performance. Periodic monitoring and condition assessment is an essential requirement for the safety of vehicles moving on that road and the wellbeing of people. The traditional characterization of the different types of distress often involves complex activities, sometimes inefficient and risky, as they interfere with road traffic. The mobile laser systems (MLS) are now widely used to acquire detailed information about the road surface in terms of a three-dimensional point cloud. Despite its increasing use, there are still no standards for the acquisition and processing of the data collected. The aim of our work was to develop a procedure for processing the data acquired by MLS, in order to identify the localized degradations that mostly affect safety. We have studied the data flow and implemented several processing algorithms to identify and quantify a few types of distresses, namely potholes and swells/shoves, starting from very dense point clouds. We have implemented data processing in four steps: (i) editing of the point cloud to extract only the points belonging to the road surface, (ii) determination of the road roughness as deviation in height of every single point of the cloud with respect to the modeled road surface, (iii) segmentation of the distress (iv) computation of the main geometric parameters of the distress in order to classify it by severity levels. The results obtained by the proposed methodology are promising. The procedures implemented have made it possible to correctly segmented and identify the types of distress to be analyzed, in accordance with the on-site inspections. The tests carried out have shown that the choice of the values of some parameters to give as input to the software is not trivial: the choice of some of them is based on considerations related to the nature of the data, for others, it derives from the distress to be segmented. Due to the different possible configurations of the various distresses it is better to choose these parameters according to the boundary conditions and not to impose default values. The test involved a 100-m long urban road segment, the surface of which was measured with an MLS installed on a vehicle that traveled the road at 10 km/h.

scholarly journals Processing Chain for Estimation of Tree Diameter from GNSS-IMU-Based Mobile Laser Scanning Data

2019 ◽  
Vol 11 (6) ◽  
pp. 615 ◽  
Author(s):  
Juraj Čerňava ◽  
Martin Mokroš ◽  
Ján Tuček ◽  
Michal Antal ◽  
Zuzana Slatkovská
Keyword(s):  
Point Cloud ◽  
Laser Scanning ◽  
Forest Canopy ◽  
Point Clouds ◽  
Satellite System ◽  
Forest Road ◽  
Forest Mapping ◽  
Fitting Method ◽  
Progressive Technology ◽  
Global Navigation Satellite

Mobile laser scanning (MLS) is a progressive technology that has already demonstrated its ability to provide highly accurate measurements of road networks. Mobile innovation of the laser scanning has also found its use in forest mapping over the last decade. In most cases, existing methods for forest data acquisition using MLS result in misaligned scenes of the forest, scanned from different views appearing in one point cloud. These difficulties are caused mainly by forest canopy blocking the global navigation satellite system (GNSS) signal and limited access to the forest. In this study, we propose an approach to the processing of MLS data of forest scanned from different views with two mobile laser scanners under heavy canopy. Data from two scanners, as part of the mobile mapping system (MMS) Riegl VMX-250, were acquired by scanning from five parallel skid trails that are connected to the forest road. Misaligned scenes of the forest acquired from different views were successfully extracted from the raw MLS point cloud using GNSS time based clustering. At first, point clouds with correctly aligned sets of ground points were generated using this method. The loss of points after the clustering amounted to 33.48%. Extracted point clouds were then reduced to 1.15 m thick horizontal slices, and tree stems were detected. Point clusters from individual stems were grouped based on the diameter and mean GNSS time of the cluster acquisition. Horizontal overlap was calculated for the clusters from individual stems, and sufficiently overlapping clusters were aligned using the OPALS ICP module. An average misalignment of 7.2 mm was observed for the aligned point clusters. A 5-cm thick horizontal slice of the aligned point cloud was used for estimation of the stem diameter at breast height (DBH). DBH was estimated using a simple circle-fitting method with a root-mean-square error of 3.06 cm. The methods presented in this study have the potential to process MLS data acquired under heavy forest canopy with any commercial MMS.

Three Dimensional Modeling of Buildings Using Three Dimensional Laser Scanning Data

2012 ◽  
Vol 594-597 ◽  
pp. 2398-2401
Author(s):  
Dong Ling Ma ◽  
Jian Cui ◽  
Fei Cai
Keyword(s):  
Point Cloud ◽  
Laser Scanning ◽  
3D Visualization ◽  
Cloud Model ◽  
Three Dimensional ◽  
3D Models ◽  
Three Dimensional Modeling ◽  
Dimensional Modeling ◽  
Feature Lines ◽  
Point Cloud Model

This paper provides a scheme to construct three dimensional (3D) model fast using laser scanning data. In the approach, firstly, laser point cloud are scanned from different scan positions and the point cloud coming from neighbor scan stations are spliced automatically to combine a uniform point cloud model, and then feature lines are extracted through the point cloud, and the framework of the building are extracted to generate 3D models. At last, a conclusion can be drawn that 3D visualization model can be generated quickly using 3D laser scanning technology. The experiment result shows that it will bring the application model and technical advantage which traditional mapping way can not have.

scholarly journals 3D COMPARISON TOWARDS A COMPREHENSIVE ANALYSIS OF A BUILDING IN CULTURAL HERITAGE

2018 ◽  
Vol XLII-2 ◽  
pp. 1061-1066 ◽  
Author(s):  
I. Selvaggi ◽  
M. Dellapasqua ◽  
F. Franci ◽  
A. Spangher ◽  
D. Visintini ◽  
...  
Keyword(s):  
Cultural Heritage ◽  
Point Cloud ◽  
Laser Scanning ◽  
Three Dimensional ◽  
Deformation Analysis ◽  
Point Cloud Data ◽  
Cloud Data ◽  
Site Restoration ◽  
Close Range ◽  
Remote Sensing Techniques

Terrestrial remote sensing techniques, including both Terrestrial Laser Scanning (TLS) and Close-Range Photogrammetry (CRP), have been recently used in multiple applications and projects with particular reference to the documentation/inspection of a wide variety of Cultural Heritage structures.<br> The high density of TLS point cloud data allows to perform structure survey in an unprecedented level of detail, providing a direct solution for the digital three-dimensional modelling, the site restoration and the analysis of the structural conditions. Textural information provided by CRP can be used for the photorealistic representation of the surveyed structure. With respect to many studies, the combination of TLS and CRP techniques produces the best results for Cultural Heritage documentation purposes. Moreover, TLS and CRP point cloud data have been proved to be useful in the field of deformation analysis and structural health monitoring. They can be the input data for the Finite Element Method (FEM), providing some prior knowledge concerning the material and the boundary conditions such as constraints and loading.<br> The paper investigates the capabilities and advantages of TLS and CRP data integration for the three-dimensional modelling compared to a simplified geometric reconstruction. This work presents some results concerning the Baptistery of Aquileia in Italy, characterized by an octagonal plan and walls composed by masonry stones with good texture.

scholarly journals High resolution digital 3D modelling of subsurface morphological structures of Koutouki Cave, Greece

2020 ◽  
Vol 49 (2-3) ◽  
Author(s):  
Aliki Konsolaki ◽  
Emmanuel Vassilakis ◽  
Leonidas Gouliotis ◽  
Georgios Kontostavlos ◽  
Vassilis Giannopoulos
Keyword(s):  
Point Cloud ◽  
Laser Scanning ◽  
Open Space ◽  
Three Dimensional ◽  
Laser Scanner ◽  
Column Height ◽  
Indoor Environments ◽  
Terrain Analysis ◽  
Dimensional Measurements ◽  
Quantification Analysis

Remote sensing techniques and laser scanning technology have given us the opportunity to study indoor environments, such as caves, with their complex and unique morphology. In the presented case study, we used a handheld laser scanner for acquiring points with projected coordinate information (X, Y, Z) covering the entire show cave of Koutouki; including its hidden passages and dark corners. The point cloud covers the floor, the walls, and the roof of the cave, as well as the stalactites, stalagmites and the connected columns that constitute the decoration of the cave. The absolute and exact placement of the point cloud within a geographic reference frame gives us the opportunity for three-dimensional measurements and detailed visualization of the subsurface structures. Using open - source software, we managed to make a quantification analysis of the terrain and generated morphological and geometric features of the speleothems. We identified 55 columns by using digital terrain analysis and processed them statistically in order to correlate them to the frame of the cave development. The parameters that derived are the contours, each column height, the speleothem geometry and volume, as well as the volume of the open space cavity. We argue that by the demonstrated methodology, it is possible to identify with high accuracy and detail: the geomorphological features of a cave, an estimate of the speleogenesis, and the ability to monitor the evolution of a karstic system.Key words: cave, laser scanner, 3D representation, speleothems, SLAM.  

Sign in / Sign up

Export Citation Format

Share Document