scholarly journals Deposition of Gold Nanoparticles via Galvanic Replacement in DMSO and Their Influence on Formation of Silicon Nanostructures

2019 ◽  
Vol 2019 ◽  
pp. 1-7 ◽  
Author(s):  
Mariana Shepida ◽  
Orest Kuntyi ◽  
Stepan Nichkalo ◽  
Galyna Zozulya ◽  
Sergiy Korniy

The process of gold nanoparticle (AuNP) precipitation on the silicon (Si) surface by galvanic replacement (GR) in dimethyl sulfoxide (DMSO) solution depending on the concentration of H[AuCl4], temperature, and duration was investigated. It is established that with an increase in the concentration of [AuCl4]− ions (from 2 to 8 mM H[AuCl4]), both the size of AuNPs and their surface coverage density are increased. It is demonstrated that an increase in temperature causes the size of AuNPs to increase from 40 to 80 nm at 40°C to 80–120 and 120–160 nm at 50 and 60°C, respectively. As the duration of the GR process increases, there is a tendency of the particle size growth. Under the studied deposition conditions, the organic aprotic solvent medium contributes to the formation of spherical AuNPs with 2D substrate filling. It is established that the AuNPs deposited on the silicon surface catalyze the process of metal-assisted chemical etching (MacEtch), which makes it possible to obtain Si nanostructures in the form of nanowire arrays.

2021 ◽  
Author(s):  
Jeffery Alexander Powell

Raman spectroscopy is a powerful tool for detection of chemical and bioanalytes but lacks enhancement required to detect these analytes at the ultrahigh sensitivity needed for many applications. Surface enhanced Raman Scattering is a technique by which an analyte signal can become greatly enhanced and, near single molecule sensitivity, is achievable. Currently, SERS-based detection platforms currently rely on noble metal nanostructures as primary enhancing sources for the detection of chemical and bioanalytes but have significant limitations in terms of reproducibility and biocompatibility. Recent research has shown that semiconductors have the ability to exhibit SERS enhancing characteristics that can potentially supplant the use of noble metals without the limitations associated with noble metal nanomaterials. This thesis presents, the generation of three-dimensional self-assembled hybrid silicon nanostructures though a laser-ion plume formation mechanism. These Si nanostructures exhibit high sensitivity SERS enhancement characteristics which can be applied for chemical and biosensing applications. In this thesis, the Raman enhancing characteristics of the hybrid Si nanostructures are examined and correlated to the unique physical morphology and material chemistry of these nanostructures. These Si nanostructures are shown to be comprised of individual Si nanospheroids that have fused to form a highly 3D nanoweb-like self-assembled nanostructures. It is also shown that these nanospheroids are composed of both amorphous and polycrystalline sub-regions, which can only be generated within an ion-plume formed by a femtosecond pulsed laser. By programming the laser, the nanostructure morphology and hybrid nature can be manipulated and optimized. These Si nanostructures are shown to be highly sensitive as SERS platforms for chemical analytes. In addition, it is shown that with the application of noble metal nanoparticles on the surface of the 3D hybrid silicon nanowebs structures, an additional enhancement boost can be optimized for the detection of chemical molecules. With this, the dual contribution to the SERS sensitivity from both the primary Si nanostructures and the secondary noble metal nanostructures can be used to detect the presence of a biomolecule analyte is shown. To delve deeper into how these hybrid Si nanostructures cause SERS enhancement of bioanalytes, the Si ion interactions within the laser-ion plume were manipulated to induce quantum-scale defects within the hybrid Si nanospheroids. By creating both an inert and oxygenated laser-ion plumes the formation of sub-nanograins within the nanospheroids and sub-nanovoids on the nanospheroid surface is shown to significantly enhance the detection of bioanalyte signal for multiple biomolecules which act as signals for various diseases. Based on the results in this thesis, it has been proven that Si-based nanostructures have the capacity to be used as sole SERS enhancing sources for chemical and biomolecule analytes.


2019 ◽  
Vol 53 (4) ◽  
pp. 576
Author(s):  
Ю.А. Жарова ◽  
В.А. Толмачев ◽  
С.И. Павлов

AbstractThis study consisting of two parts is concerned with the features of the three-stage process of the metal-assisted chemical etching (MACE) of silicon. This process is used to fabricate silicon nanostructures. In the first part of this work, a layer of self-assembled Ag nanoparticles chemically deposited from a solution on the surface of single-crystal silicon (c-Si) (MACE stage 1) was studied, and the second part includes of investigation of Si nanostructures formed in stages 2 and 3. By means of spectroscopic ellipsometry (in the range of wavelengths λ = 250–900 nm), the pseudodielectric functions of the nanostructures were determined and compared for all the three stages of the MACE process. In addition, for the Si nanostructures, the parameters of layers (the thickness and void fraction) were calculated in the context of the multilayer optical model, with the use of Bruggeman’s effective-medium approximation and fitting procedures.


2019 ◽  
Vol 7 (40) ◽  
pp. 6247-6256
Author(s):  
Binbin Chu ◽  
Sicong Wu ◽  
Xiaoyuan Ji ◽  
Runzhi Chen ◽  
Bin Song ◽  
...  

A facile microwave-assisted synthetic approach enables the fabrication of different-dimensional Si nanostructures with unique optical merits for cancer therapy.


1993 ◽  
Vol 298 ◽  
Author(s):  
Fereydoon Namavar ◽  
R.F. Pinizzotto ◽  
H. Yang ◽  
N. Kalkhoran ◽  
P. Maruska

AbstractHigh resolution cross-sectional electron microscopy and electron diffraction of an np heterojunction porous Si device, capable of emitting light at visible wavelengths, clearly indicates the presence of Si nanostructures within the quantum size regime. These results indicate that the quantum confinement effect is at least partially responsible for photoluminescence at visible wavelengths.


1995 ◽  
Vol 405 ◽  
Author(s):  
Yoshihiko Kanemitsu

AbstractWe discuss the mechanism of red luminescence from surface-oxidized Si nanostructures. The interface state between crystalline Si and SiO2 surface layer plays an essential role in efficient visible luminescence. The crystalline Si nanostructures with a disorder potential of interface states show complicated luminescence properties.


2015 ◽  
Vol 7 (17) ◽  
pp. 7177-7185 ◽  
Author(s):  
Danielle N. Bassanese ◽  
Arianne Soliven ◽  
Xavier A. Conlan ◽  
R. Andrew Shalliker ◽  
Neil W. Barnett ◽  
...  

A multi-location peak parking protocol was developed for a non-destructive assessment of the axial heterogeneity of in situ modified monoliths. This was tested on a column with a surface coverage density gradient along the length of the monolithic rod. Qualitative changes in band broadening were observed and were consistent with theoretical studies.


Author(s):  
Xing Fang ◽  
Changying Zhao ◽  
Hua Bao

The optical performance of four lattice crystalline silicon nanostructures, i.e., cylinder nanowire arrays, cylinder nanohole arrays, square nanowire arrays and square nanohole arrays is numerically investigated in this paper. The method of rigorous coupled-wave analysis (RCWA), an efficient and accurate computational tool, is used to calculate the optical absorption for the lattice constant from 100 nm to 1500 nm. The results indicate that the lattice constant is the foremost structure parameter to determine the ultimate efficiency, and the ultimate efficiencies are reached at the lattice constant around 600 nm. The optimal filling ratio of square nanowire arrays is the lowest among the four nonostructures, whereas the cylinder nanohole arrays exhibit a broad range of optimal filling ratios. Lower optimal filling ratios implies that the nanostructures cost less raw material while maintain the high ultimate efficiencies. The high ultimate efficiency of all structures can be achieved over a large range of incident angles, even the efficiency will slowly decrease as the incident angle increases.


2020 ◽  
Vol 0 (0) ◽  
Author(s):  
Ramuvel Muthuvel ◽  
Manimaran Arunachalam ◽  
Vinayagar Karanthamalai ◽  
Ragavendran Venkatesan ◽  
Vishnukanthan Venkatachalapathy ◽  
...  

AbstractThe present work discusses the systematic study of mechanical properties of the silicon nanostructures formed by metal assisted chemical etching (MACE). Silver electrolyte solution, along with hydrogen fluoride, was utilized in formation of silicon nanostructures. An optimized condition of etching time and silver electrolyte concentration were utilized to obtain high aspect ratio, defect-free and high density nanowire arrays on Si wafers. The as-prepared silicon nanostructures (SiNS) were investigated by Scanning electron microscopy (SEM) and nano indentation technique to bring out the morphological and mechanical properties. Further, the variation in optical properties of the bulk silicon and Si nanowire arrays were also investigated to determine the formation of nanostructures.


Sign in / Sign up

Export Citation Format

Share Document