scholarly journals Self-Assembled Nanoscaled Metalloporphyrin for Optical Detection of Dimethylmethylphosphonate

2019 ◽  
Vol 2019 ◽  
pp. 1-9 ◽  
Author(s):  
Mingbo Wu ◽  
Hongsheng Yang ◽  
He Wei ◽  
Xueli Hu ◽  
Bo Qu ◽  
...  
Keyword(s):  
Self Assembly ◽  
Metal Ion ◽  
Density Functional ◽  
Detection Limits ◽  
Functional Materials ◽  
Binding Energies ◽  
Central Metal ◽  
Mixed Solution ◽  
Functional Theory ◽  
Axial Ligands

The self-assembly approach has been widely adopted in the effort to design and prepare functional materials. Herein, we report the synthesis and optical properties of metalloporphyrin nanoparticles. Nanoscaled particles of 5,10,15,20-tetraphenylporphyrin manganese (MnTPP) and 5,10,15,20-tetraphenylporphyrin indium (InTPP) were produced in the water/dimethylsulfoxide (DMSO) mixed solution by self-assembly approach. The absorbance intensity at the characteristic peak of the monomeric and nanoscaled metalloporphyrins decreased when they interact with dimethylmethylphosphonate (DMMP). Detection limits of MnTPP and InTPP nanoparticles to DMMP were 10−9 and 10−10 L/L, respectively, and detection limits of monomeric MnTPP and InTPP to DMMP were 10−6 and 10−7 L/L, respectively. Density functional theory (DFT) calculations on MnTPP and InTPP with DMMP as axial ligands had been performed in the B3LYP/6-31g (d) approximation. Their optimized geometries and binding energies were found to depend very strongly on the central metal ion, and InTPP was more sensitive for DMMP detection in contract to MnTPP. All the experimental and theoretical results demonstrated that nanoscaled metalloporphyrin have potential prospects in determination for public safety.

Electronic structures, spectroscopic properties, and reaction activities of porphyrins with alkali metal ions: density functional theory approach to the central metal effects

2012 ◽  
Vol 16 (07n08) ◽  
pp. 927-934 ◽  
Author(s):  
Luyang Zhao ◽  
Dongdong Qi ◽  
Lijuan Zhang ◽  
Ming Bai ◽  
Xue Cai
Keyword(s):  
Density Functional Theory ◽  
Alkali Metal ◽  
Metal Ions ◽  
Metal Ion ◽  
Density Functional ◽  
State Transitions ◽  
Theory Approach ◽  
Central Metal ◽  
Functional Theory ◽  
Molecular Stability

Density functional theory (DFT) calculation method was employed to investigate a series of nine alkali metal porphyrins (alk-Pors), namely HLiPor , HNaPor , HKPor , Li2Por , LiNaPor , LiKPor , Na2Por , NaKPor , and K2Por . These molecules show different configurations depending on different metal ions which locate over the central hole of the porphyrin ligand. Alk-Pors with larger-radius metal ion have smaller binding energy and thus is more difficult to keep stable. Further detailed molecular stability analysis was carried out by noncovalent interaction and electrostatic interaction via RDG and NBO charge distribution. UV-vis spectra of these nine compounds also show different spectral shapes depending on the central metals, and the dominant state transitions with high degeneracy are revealed to be influenced by high molecular symmetric order. Finally their difference in reactivity due to the electronegativity of central metals and the nature of porphyrin rings are predicted by electrostatic potential and Fukui functions.

The role of the metal ion in the photophysical behavior of Co(II), Ni(II), and Cu(II) octabutoxynaphthalocyanines: insights from ultra-fast time-resolved spectroscopy and DFT/TDDFT calculations

2010 ◽  
Vol 14 (08) ◽  
pp. 689-700 ◽  
Author(s):  
Giampaolo Ricciardi ◽  
Alexandra V. Soldatova ◽  
Angela Rosa
Keyword(s):  
Density Functional Theory ◽  
Metal Ion ◽  
Density Functional ◽  
Transient Absorption ◽  
Density Functional Theory Calculations ◽  
Fast Time ◽  
Central Metal ◽  
Functional Theory ◽  
Time Resolved ◽  
Deactivation Mechanism

The photo-deactivation mechanism of the MNc(OBu)8 (M = Co, Ni, Cu) series of complexes is reviewed, with special emphasis on the role played by the central metal. Ultra-fast transient absorption experiments and Density Functional Theory and time-dependent Density Functional Theory calculations consistently show that the central metal modifies the photo-deactivation mechanism of the investigated complexes by inducing substantial changes in the nature and energy of the excited states lying between the photo-generated state and the ground state.

scholarly journals H2O coordination in macropa complexes of f elements (Ac, La, Lu): feasibility of the 11th coordination site

2021 ◽  
Author(s):  
Attila Kovács ◽  
Zoltán Varga
Keyword(s):  
Aqueous Solution ◽  
Metal Ion ◽  
Density Functional ◽  
Molecular Level ◽  
Density Functional Theory Calculations ◽  
Functional Theory ◽  
Coordination Site ◽  
Additional Ligand ◽  
Ligand Coordination ◽  
Bonding Properties

AbstractThe feasibility of an additional ligand coordination at the 11th coordination site of actinium, lanthanum, and lutetium ions in 10-fold coordinated macropa complexes has been studied by means of density functional theory calculations. The study covered the two main macropa conformers, Δ(δλδ)(δλδ) and Δ(λδλ)(λδλ), favoured by larger (Ac3+, La3+) and smaller (Lu3+) ions, respectively. At the molecular level, the coordination of H2O is the most favourable to the largest Ac3+ while only slightly less to La3+. Protonation of the picoline arms enhances the coordination by shifting the metal ion closer to the open site of the ligand. The choice of macropa conformer has only a slight influence on the strength and bonding properties of the H2O coordination. Aqueous solution environment decreases considerably the energy gain of H2O coordination at the 11th coordination site.

scholarly journals A Comparative Study of Oxygen and Hydrogen Adsorption on Strained and Alloy-Supported Pt(111) Monolayers

2021 ◽  
Vol 7 (7) ◽  
pp. 101
Author(s):  
Ian Shuttleworth
Keyword(s):  
Comparative Study ◽  
Density Functional ◽  
Hydrogen Adsorption ◽  
Binding Energies ◽  
High Symmetry ◽  
Density Functionals ◽  
Functional Theory ◽  
Ligand Effects ◽  
Ferromagnetic Alloys ◽  
Depth Study

A comparative study of the unreacted and reacted uniaxially strained Pt(111) and the layered (111)-Pt/Ni/Pt3Ni and (111)-Pt/Ni/PtNi3 surfaces has been performed using density functional theory (DFT). An in-depth study of the unreacted surfaces has been performed to evaluate the importance of geometric, magnetic and ligand effects in determining the reactivity of these different Pt surfaces. An analysis of the binding energies of oxygen and hydrogen over the high-symmetry binding positions of all surfaces has been performed. The study has shown that O and H tend to bind more strongly to the (111)-Pt/Ni/Pt3Ni surface and less strongly to the (111)-Pt/Ni/PtNi3 surface compared to binding on the equivalently strained Pt(111) surfaces. Changes in the surface magnetisation of the surfaces overlaying the ferromagnetic alloys during adsorption are discussed, as well as the behaviour of the d-band centre across all surfaces, to evaluate the potential mechanisms for these differences in binding. An accompanying comparison of the accessible density functionals has been included to estimate the error in the computational binding energies.

A DFT study of spherands containing five anisyl groups — Highly preorganized to bind the alkali metal

2006 ◽  
Vol 84 (8) ◽  
pp. 1045-1049 ◽  
Author(s):  
Shabaan AK Elroby ◽  
Kyu Hwan Lee ◽  
Seung Joo Cho ◽  
Alan Hinchliffe
Keyword(s):  
Density Functional Theory ◽  
Binding Energy ◽  
Density Functional ◽  
Ionic Radius ◽  
Binding Energies ◽  
Cavity Size ◽  
X Ray Diffraction ◽  
Functional Theory ◽  
X Ray ◽  
Good Agreement

Although anisyl units are basically poor ligands for metal ions, the rigid placements of their oxygens during synthesis rather than during complexation are undoubtedly responsible for the enhanced binding and selectivity of the spherand. We used standard B3LYP/6-31G** (5d) density functional theory (DFT) to investigate the complexation between spherands containing five anisyl groups, with CH2–O–CH2 (2) and CH2–S–CH2 (3) units in an 18-membered macrocyclic ring, and the cationic guests (Li+, Na+, and K+). Our geometric structure results for spherands 1, 2, and 3 are in good agreement with the previously reported X-ray diffraction data. The absolute values of the binding energy of all the spherands are inversely proportional to the ionic radius of the guests. The results, taken as a whole, show that replacement of one anisyl group by CH2–O–CH2 (2) and CH2–S–CH2 (3) makes the cavity bigger and less preorganized. In addition, both the binding and specificity decrease for small ions. The spherands 2 and 3 appear beautifully preorganized to bind all guests, so it is not surprising that their binding energies are close to the parent spherand 1. Interestingly, there is a clear linear relation between the radius of the cavity and the binding energy (R2 = 0.999).Key words: spherands, preorganization, density functional theory, binding energy, cavity size.

scholarly journals Self-assembly of N-heterocyclic carbenes on Au(111)

2021 ◽  
Vol 12 (1) ◽  
Author(s):  
Alex Inayeh ◽  
Ryan R. K. Groome ◽  
Ishwar Singh ◽  
Alex J. Veinot ◽  
Felipe Crasto de Lima ◽  
...  
Keyword(s):  
Self Assembly ◽  
Density Functional ◽  
Surface Coverage ◽  
High Mobility ◽  
Heterocyclic Carbenes ◽  
Scanning Tunneling ◽  
Tunneling Microscopy ◽  
Surface Geometry ◽  
Functional Theory ◽  
Interesting Alternative

AbstractAlthough the self-assembly of organic ligands on gold has been dominated by sulfur-based ligands for decades, a new ligand class, N-heterocyclic carbenes (NHCs), has appeared as an interesting alternative. However, fundamental questions surrounding self-assembly of this new ligand remain unanswered. Herein, we describe the effect of NHC structure, surface coverage, and substrate temperature on mobility, thermal stability, NHC surface geometry, and self-assembly. Analysis of NHC adsorption and self-assembly by scanning tunneling microscopy and density functional theory have revealed the importance of NHC-surface interactions and attractive NHC-NHC interactions on NHC monolayer structures. A remarkable way these interactions manifest is the need for a threshold NHC surface coverage to produce upright, adatom-mediated adsorption motifs with low surface diffusion. NHC wingtip structure is also critical, with primary substituents leading to the formation of flat-lying NHC2Au complexes, which have high mobility when isolated, but self-assemble into stable ordered lattices at higher surface concentrations. These and other studies of NHC surface chemistry will be crucial for the success of these next-generation monolayers.

STRUCTURES, ELECTRONIC AND MAGNETIC PROPERTIES OF C20 FULLERENES DOPED TRANSITION METAL ATOMS M@C20 (M = Fe, Co, Ti, V)

2010 ◽  
Vol 21 (12) ◽  
pp. 1469-1477 ◽  
Author(s):  
M. SAMAH ◽  
B. BOUGHIDEN
Keyword(s):  
Density Functional Theory ◽  
Magnetic Moment ◽  
Density Functional ◽  
Binding Energies ◽  
Functional Theory ◽  
Magnetic Dipoles ◽  
Metal Atoms ◽  
Transition Metal Atoms ◽  
Semiconductor Behavior ◽  
Co Doped

Structures, binding energies, magnetic and electronic properties endohedrally doped C 20 fullerenes by metallic atoms ( Fe , Co , Ti and V ) have been obtained by pseudopotential density functional theory. All M @ C 20, except Co @ C 20, are more stable than the undoped C 20 cage. The magnetic moment values are 1 and 2μB. These values and semiconductor behavior give to these compounds interesting feature in several technological applications. Titanium doped C 20 has a same magnetic moment than the isolated Ti atom. Hybridization process in the Co doped C 20 fullerene is most strong than in other doped cages. Electrical and magnetic dipoles calculated in the iron doped C 20 are very strong compared with other clusters.

First-Principles Analysis on Interaction between Dopant (Ga, Sb) and Contamination Metal Atoms in Ge Crystals

2013 ◽  
Vol 205-206 ◽  
pp. 417-421
Author(s):  
Tatsunori Yamato ◽  
Koji Sueoka ◽  
Takahiro Maeta
Keyword(s):  
First Principles ◽  
Density Functional ◽  
Density Functional Theory Calculations ◽  
Binding Energies ◽  
Functional Theory ◽  
Substitutional Site ◽  
Metal Impurities ◽  
Metal Atoms ◽  
Total Energies ◽  
Group 3

The lowest energetic configurations of metal impurities in 4throw (Sc - Zn), 5throw (Y - Cd) and 6throw (Hf - Hg) elements in Ge crystals were determined with density functional theory calculations. It was found that the substitutional site is the lowest energetic configuration for most of the calculated metals in Ge. The most stable configurations of dopant (Ga, Sb) - metal complexes in Ge crystals were also investigated. Following results were obtained. (1) For Ga dopant, 1st neighbor T-site is the most stable for metals in group 3 to 7 elements while substitutional site next to Ga atom is the most stable for metals in group 8 to 12 elements. (2) For Sb dopant, substitutional site next to Sb atom is the most stable for all calculated metals. Binding energies of the interstitial metalMiwith the substitutional dopantDswere obtained by the calculated total energies. The calculated results for Ge were compared with those for Si.

Sign in / Sign up

Export Citation Format

Share Document