scholarly journals Extents of Predictors for Land Surface Temperature Using Multiple Regression Model

2020 ◽  
Vol 2020 ◽  
pp. 1-10
Author(s):  
R. M. Yuvaraj

Land surface temperature (LST) is a key factor in numerous areas such as climate change, land use/land cover in the urban areas, and heat balance and is also a significant participant in the creation of climate models. Landsat data has given numerous possibilities to understand the land processes by means of remote sensing. The present study has been performed to identify the LST of the study region using Landsat 8 OLI/TIRS satellite images for two time periods in order to compare the data. The study also attempted to identify and predict the role and importance of NDVI, NDBI, and the slope of the region on LST. The study concludes that the maximum and minimum temperatures of 40.44 C and 20.78 C were recorded during the November month whereas the maximum and minimum LST for month March has increased to 42.44 C and 24.57 C respectively. The result indicates that LST is inversely proportional to NDVI (−6.369) and slope (−0.077) whereas LST is directly proportional to NDBI (+14.74). Multiple linear regression model has been applied to calculate the extents of NDVI, NDBI, and slope on the LST. It concludes that the increase in vegetation and slope would result in slight decrease in temperature whereas the increase in built-up will result in a huge increase in temperature.

2018 ◽  
Vol 55 (4C) ◽  
pp. 129
Author(s):  
Nguyen Bac Giang

This paper presents the analysis of the effect of urban green space types on land surface temperature in Hue city. Data are collected with temperature monitoring results from each green space type and the interpretation of surface temperature based on Landsat 8 satellite image data to determine temperatures at different times of the year. Results showed that there was a significant correlation between types of urban green space and the surface temperature. Types of green space with a large area and vegetation indexes have a greater effect on temperature than areas with a smaller green space do. Green space types including forest green space, dedicated green space and agriculture green space have the most effect on the surface temperature. The forest area has the greatest influence on the temperature with a temperature difference of more than 1.6 degrees Celsius at 9:00 in the daytime. Besides, the results extracted from satellite images also show that the area of urban green space going to be reduced makes a contribution to increase the surface temperature of urban areas. The study results have established foundation for planning the green spaces in climate change challenges in Hue City.


2021 ◽  
Vol 333 ◽  
pp. 02008
Author(s):  
Anna Gosteva ◽  
Sofia Ilina ◽  
Aleksandra Matuzko

The replacement of the natural landscape by artificial environment has led to changes in the ecosystem and physical properties of the surface, such as heat storage capacity, and thermal conductivity properties. These changes increase the difficulty of heat transfer between urban areas and the environment. Land surface temperature (LST) images from various satellites are widely used to represent urban thermal environments, which are more convenient and intuitive way. LST maps provide full spatial coverage, which distinguishes them from air temperature data obtained from meteorological stations. The study of LST according to the Landsat 8 data of Krasnoyarsk city over the past 10 years allowed the authors to talk about the observation of constant seasonal urban heat islands (UHI). For a more detailed consideration of the urban environment, this study further considers urban landscapes, thus the idea of local climate zone (LCZ) is introduced to study these diverse impacts in addition to the traditional map of LST. And analysis of the interaction of UHI and LCZ.


2021 ◽  
Vol 16 (3) ◽  
Author(s):  
Rajeev Shankhwar ◽  
Rajlakshmi Datta ◽  
Navendra Uniyal

Dehradun city is the capital of Uttarakhand state of India. Evidence from the past research and literature [e.g. CDP 2007, Singh et al 2013, Gupta et al 2014] shows that in the late 80s, Dehradun city was much greener compared to the present condition. In the current study, we tried to identify the correlation between land surface temperature (LST) with Forest cover density classes (FCDC) and built-up area with open land. The current study reveals that there is a relationship between FCDC and LST in the study area. The range of LST recorded is between 32.07 to 43.99 °C. Among all the classes, minimum LST record in VDF class is 32.07°C and maximum LST record in built-up area 43.99°C. The present study shows the importance of vegetation cover in urban areas to reduce LST, air temperature and maintain the urban microclimate as well as to help reduce air pollution.


2021 ◽  
Vol 13 (8) ◽  
pp. 1526
Author(s):  
Yaoyao Zheng ◽  
Yao Li ◽  
Hao Hou ◽  
Yuji Murayama ◽  
Ruci Wang ◽  
...  

The rapid urbanization worldwide has brought various environmental problems. The urban heat island (UHI) phenomenon is one of the most concerning issues because of its strong relation with daily lives. Water bodies are generally considered a vital resource to relieve the UHI. In this context, it is critical to develop a method for measuring the cooling effect and scale of water bodies in urban areas. In this study, West Lake and Xuanwu Lake, two famous natural inner-city lakes, are selected as the measuring targets. The scatter plot and multiple linear regression model were employed to detect the relationship between the distance to the lake and land surface temperature based on Landsat 8 Operational Land Imager/Thermal Infrared Sensor (OLI/TIRS) and Sentinel-2 data. The results show that West Lake and Xuanwu Lake massively reduced the land surface temperature within a few hundred meters (471 m for West Lake and 336 m for Xuanwu Lake) and have potential cooling effects within thousands of meters (2900 m for West Lake and 3700 m for Xuanwu Lake). The results provide insights for urban planners to manage tradeoffs between the large lake design in urban areas and the cooling effect demands.


Author(s):  
N. A. Isa ◽  
W. M. N. Wan Mohd ◽  
S. A. Salleh

A common consequence of rapid and uncontrollable urbanization is Urban Heat Island (UHI). It occurs due to the negligence on climate behaviour which degrades the quality of urban climate condition. Recently, addressing urban climate in urban planning through mapping has received worldwide attention. Therefore, the need to identify the significant factors is a must. This study aims to analyse the relationships between Land Surface Temperature (LST) and two urban parameters namely built-up and green areas. Geographical Information System (GIS) and remote sensing techniques were used to prepare the necessary data layers required for this study. The built-up and the green areas were extracted from Landsat 8 satellite images either using the Normalized Difference Built-Up Index (NDBI), Normalized Difference Vegetation Index (NDVI) or Modified Normalize Difference Water Index (MNDWI) algorithms, while the mono-window algorithm was used to retrieve the Land Surface Temperature (LST). Correlation analysis and Multi-Linear Regression (MLR) model were applied to quantitatively analyse the effects of the urban parameters. From the study, it was found that the two urban parameters have significant effects on the LST of Kuala Lumpur City. The built-up areas have greater influence on the LST as compared to the green areas. The built-up areas tend to increase the LST while green areas especially the densely vegetated areas help to reduce the LST within an urban areas. Future studies should focus on improving existing urban climatic model by including other urban parameters.


Author(s):  
M. Kim ◽  
K. Cho ◽  
H. Kim ◽  
Y. Kim

Abstract. Obtaining spatially continuous, high resolution thermal images is crucial in order to effectively analyze heat-related phenomena in urban areas and the inherent high spatial and temporal variations. Spatiotemporal Fusion (STF) methods can be applied to enhance spatial and temporal resolutions simultaneously, but most STF approaches for the generation of Land Surface Temperature (LST) have not focused specifically on urban regions. This study therefore proposes a two-phase approach using Landsat 8 and MODIS images acquired on a study area in Beijing to first, investigate the sharpening of the fine resolution image input with urban-related spectral indices and second, to explore the potential of implementing the sharpened results into the Spatiotemporal Adaptive Data Fusion Algorithm for Temperature Mapping (SADFAT) to generate high spatiotemporal resolution LST images in urban areas. For this test, five urban indices were selected based on their correlation with brightness temperature. In the thermal sharpening phase, the Fractional Urban Cover (FUC) index was able to delineate spatial details in urban regions whilst maintaining its correlation with the original brightness temperature image. In the STF phase however, FUC sharpened results returned relatively high levels of correlation coefficient values up to 0.689, but suffered from the highest Root Mean Squared Error (RMSE) and Average Absolute Difference (AAD) values of 4.260 K and 2.928 K, respectively. In contrast, Normalized Difference Building Index (NDBI) sharpened results recorded the lowest RMSE and AAD values of 3.126 K and 2.325 K, but also the lowest CC values. However, STF results were effective in delineating fine spatial details, ultimately demonstrating the potential of using sharpened urban or built-up indices as a means to generate sharpened thermal images for urban areas, as well as for input images in the SADFAT algorithm. The results from this study can be used to further improve STF approaches for daily and spatially continuous mapping of LST in urban areas.


Author(s):  
R. Bala ◽  
R. Prasad ◽  
V. P. Yadav ◽  
J. Sharma

<p><strong>Abstract.</strong> The temperature rise in urban areas has become a major environmental concern. Hence, the study of Land surface temperature (LST) in urban areas is important to understand the behaviour of different land covers on temperature. Relation of LST with different indices is required to study LST in urban areas using satellite data. The present study focuses on the relation of LST with the selected indices based on different land cover using Landsat 8 OLI (Operational Land Imager) and TIRS (Thermal Infrared Sensor) data in Varanasi, India. A regression analysis was done between LST and Normalized Difference Vegetation index (NDVI), Normalized Difference Soil Index (NDSI), Normalized Difference Built-up Index (NDBI) and Normalized Difference Water Index (NDWI). The non-linear relations of LST with NDVI and NDWI were observed, whereas NDBI and NDSI were found to show positive linear relation with LST. The correlation of LST with NDSI was found better than NDBI. Further analysis was done by choosing 25 pure pixels from each land cover of water, vegetation, bare soil and urban areas to determine the behaviour of indices on LST for each land cover. The investigation shows that NDSI and NDBI can be effectively used for study of LST in urban areas. However, NDBI can explain urban LST in the better way for the regions without water body.</p>


2021 ◽  
Vol 2 (1) ◽  
pp. 39-55
Author(s):  
Sheheryar Khan ◽  
Sajid Gul ◽  
Weidong Li

The Urban Heat Island (UHI) concept is one of the most serious ecological and social challenges of the urbanisation. As a result of these events, several man-made urban areas have displaced the rural areas with increased thermal conductivity surfaces, resulting in higher temperatures in the urban areas. Thus, this paper analyses the variations in Land Surface Temperature (LST) and the heat island area using Landsat 8 data and NPP VIIRS night-time light data. The data sources during 2013-2015 of Zhengzhou city, China, are selected to be a case study in this research work. According to the research, the economic centre of Zhengzhou city is shifting eastward, and the mean centre of urban area acquired from NPP VIIRS night-light data is extremely similar to the heat island area derived from Landsat 8 data. Also, the heat island areas obtained from the NPP VIIRS night-light data, and the yearbook data of Zhengzhou Bureau of Statistics are comparable with the accuracies of 96-99%. Hence, our proposed procedure can be implemented practically to point out the urban areas, to identify the UHI areas with high accuracies in other regions and also can be used to indicate how large the UHI effects on the urban area with increased population and industries.


Author(s):  
A. Karimi ◽  
P. Pahlavani ◽  
B. Bigdeli

Due to urbanization and changes in the urban thermal environment and because the land surface temperature (LST) in urban areas are a few degrees higher than in surrounding non-urbanized areas, identifying spatial factors affecting on LST in urban areas is very important. In this regard, due to the unique properties of spatial data, in this study, a geographically weighted regression (GWR) was used to identify effective spatial factors. The GWR is a suitable method for spatial regression issues, because it is compatible with two unique properties of spatial data, i.e. the spatial autocorrelation and spatial non-stationarity. In this study, the Landsat 8 satellite data on 18 August 2014 and Tehran land use data in 2006 was used for determining the land surface temperature and its effective factors. As a result, R<sup>2</sup> value of 0.765983 was obtained by taking the Gaussian kernel. The results showed that the industrial,military, transportation, and roads areas have the highest surface temperature.


Sign in / Sign up

Export Citation Format

Share Document