scholarly journals Gradation Design and Performance Evaluation of High Viscosity Asphalt Mixtures

2020 ◽  
Vol 2020 ◽  
pp. 1-14
Author(s):  
Xudong Hu ◽  
Sheng Li ◽  
Hui Yao ◽  
Hui Wang ◽  
Mei Xu ◽  
...  
Keyword(s):  
Low Temperature ◽  
Permanent Deformation ◽  
Asphalt Binder ◽  
Asphalt Mixture ◽  
High Viscosity ◽  
Superior Performance ◽  
Test Analysis ◽  
Modified Asphalt ◽  
Modified Asphalt Binder ◽  
And Performance

The property of asphalt binder plays an important role in the performance of asphalt mixture. The natural rubber additive (NRA) was recommended as a modifier in the preparation of high viscosity asphalt (HVA) binder. Then, the gradation named LASTIKA-13 was adopted to design the high viscosity asphalt mixture (HVAM) according to the orthogonal test analysis and the optimized gradation. The performance of the proposed HVAM was evaluated through a series tests including the permanent deformation at high temperature, moisture stability, low-temperature cracks, and bending fatigue test. The results indicate that the proposed modified asphalt binder shows a comparable property with the conventional modified asphalt binder. The proposed HVAM with the NRA modifier has a superior performance to other conventional mixtures in the temperature susceptibility and resistance to moisture damage. Furthermore, the proposed HVAM was less sensitive to the temperature change and has good performance in terms of resistance to low-temperature cracks, bonding characteristics, and fatigue behaviors.

scholarly journals Preparation and Performance Analysis of High-Viscosity and Elastic Recovery Modified Asphalt Binder

2019 ◽  
Vol 2019 ◽  
pp. 1-16 ◽  
Author(s):  
Liangchen Qu ◽  
Yingli Gao ◽  
Hui Yao ◽  
Dandan Cao ◽  
Ganpeng Pei ◽  
...  
Keyword(s):  
High Temperature ◽  
Low Temperature ◽  
Elastic Recovery ◽  
Asphalt Binder ◽  
Temperature Stability ◽  
Crumb Rubber ◽  
High Viscosity ◽  
High Temperature Stability ◽  
Modified Asphalt ◽  
And Performance

This study presented the preparation and performance of a kind of high viscosity and elastic recovery asphalt (HVERA) by using some modifiers. The performance of styrene-butadiene-styrene (SBS), rock asphalt (RA), crumb rubber (CR), and stabilizing agent (SA) for different modifiers was investigated by conventional binder test. Effects of modifiers on the high- and low-temperature properties of HVERA were investigated. The dynamic viscosity (DV) test, dynamic shear rheometer (DSR), and bending beam rheometer (BBR) analysis indicated that the high- and low-temperature rheological properties of asphalt were improved attribute to the addition of mixture of modifiers. Meanwhile, the short-term aging and long-term aging were simulated by rolling thin film oven (RTFO) and pressure aging vessel (PAV) tests. Furthermore, the Fourier transform infrared spectroscopy (FTIR) and scanning electron microscope (SEM) measurements were conducted for obtaining the mechanism and microstructure distribution of the modified asphalt binders. From the test results in this study, it was evident that the addition of SBS, RA, CR, and SA into a neat asphalt binder could both significantly improve the viscosity of the binder at high temperature and lower the creep stiffness at low temperature, which was beneficial to better both high-temperature stability and low-temperature cracking resistance of asphalt pavements. It was proved that the high temperature grade of HVERA could be increased by increasing of RA and a proper percentage of modifiers could be improved by the low temperature grade of HVERA.

scholarly journals Mechanics and Pavement Properties Research of Nanomaterial Modified Asphalt

2012 ◽  
Vol 5 ◽  
pp. 259-264 ◽  
Author(s):  
Shang Jiang Chen ◽  
Xiao Ning Zhang
Keyword(s):  
Low Temperature ◽  
Resilient Modulus ◽  
Asphalt Binder ◽  
Asphalt Mixture ◽  
Test Results ◽  
Modified Asphalt ◽  
Cleavage Strength ◽  
Modified Asphalt Binder ◽  
Powdered Rubber ◽  
Temperature Crack

Nanomaterials (nano powdered rubber VP401, VP501 and sepiolite and CaCo3 composites) were selected to improve the high-temperature and low-temperature performance of asphalt binder. Nanomaterial modified asphalt was prepared using the high shear machine. Laboratory experiments of asphalt binder and asphalt mixture were conducted to evaluate the properties of modified asphalt binder, including the penetration, ductility, softening point, viscosity, and etc. Also, asphalt mixture tests were carried out, such as the cleavage strength test, resilient modulus test, rutting test, water stability test and etc. Based on the test results, asphalt binder modified by 1% nano powdered rubber VP401 has better performance resistance to low temperature crack and rutting, compared to other nanomaterial modified asphalt binder.

Experimental Study on Pavement Performance of SEBS Modified Asphalt Mixture

2010 ◽  
Vol 168-170 ◽  
pp. 906-911
Author(s):  
Chuan Feng Zheng ◽  
Lei Wang ◽  
Da Jun Zhao
Keyword(s):  
Asphalt Binder ◽  
Asphalt Mixture ◽  
Pavement Performance ◽  
Moisture Susceptibility ◽  
Modified Asphalt ◽  
Modified Asphalt Binder ◽  
Beam Bending ◽  
And Performance ◽  
Wheel Tracking ◽  
Sbs Modified Asphalt

pavement performance of SEBS modified asphalt mixture are analyzed. Dynamic shear rhometer(DSR) experiments were performed to evaluate the rheology properties of SEBS modified asphalt binder and performance of SEBS modified asphalt mixture was evaluated based on laboratory experiments, experiments included: wheel tracking, moisture susceptibility, low-temperature beam bending and fatigue. The results shows that the rheology properties of SEBS modified asphalt binder are more ideal than SBS modified asphalt binder on anti-fatigue effect. Tensile stress ratio(TSR) of SEBS modified asphalt mixture increases 5.0%, tensile strength increases 6.1% and tensile strain increases 19.8%, though the dynamic stability(DS) decreases 3.1%, the fatigue life-span increases significantly compared with SBS modified asphalt mixture. It means that pavement performance of SEBS modified asphalt mixture is better than SBS modified asphalt mixture, and it is more applicable to be utilized in highway engineerings and some special engineerings such as bridge deck pavement that need anti-fatigue performance.

scholarly journals Studying the Properties of SBS/Rice Husk Ash-Modified Asphalt Binder and Mixture

2020 ◽  
Vol 2020 ◽  
pp. 1-11
Author(s):  
Zhen Lu ◽  
Aimin Sha ◽  
Wentong Wang ◽  
Junfeng Gao
Keyword(s):  
Low Temperature ◽  
Rice Husk ◽  
Softening Point ◽  
Rice Husk Ash ◽  
Asphalt Binder ◽  
Asphalt Mixture ◽  
Modified Asphalt ◽  
Temperature Performance ◽  
Modified Asphalt Binder ◽  
Rotational Viscosity

Sustainable materials in the field of road pavement have become a research direction in recent years. In this study, the rice husk ash with small dosage of styrene-butadiene-styrene (SBS) was added as a bioadditive into the base asphalt to modify its properties. Different contents (0, 2, 5, 10, and 15%) of rice husk ash (RHA) and 1% of SBS were selected to prepare the modified asphalt. Penetration, softening point, ductility, rotational viscosity test, and temperature sweep test were conducted to investigate the properties of SBS/RHA-modified asphalt binder. Rutting test, moisture susceptibility, and low-temperature cracking were utilized to evaluate the performances of SBS/RHA-modified asphalt mixture. The results showed that the penetration decreased and the softening point and rotational viscosity enhanced while the ductility slightly decreased with the incorporation of rice husk ash. The SBS/RHA-modified asphalt mixture had better high-temperature performance than that of the virgin asphalt mixture but slightly lower moisture stability and low temperature performance. The tensile strength ratio of the virgin and modified asphalt mixture met the requirement of specification. The tensile strain of mixture SR15 was lower than the requirement for the asphalt mixtures on the basis of the specification. For the SBS/RHA-modified asphalt binder based on the comprehensive properties, the content of rice husk ash should not be higher than 15%.

scholarly journals Evaluation of High-Temperature and Low-Temperature Performances of Lignin–Waste Engine Oil Modified Asphalt Binder and Its Mixture

Materials ◽  
2021 ◽  
Vol 15 (1) ◽  
pp. 52
Author(s):  
Xue Xue ◽  
Junfeng Gao ◽  
Jiaqing Wang ◽  
Yujing Chen
Keyword(s):  
High Temperature ◽  
Low Temperature ◽  
Asphalt Binder ◽  
Asphalt Mixture ◽  
Engine Oil ◽  
Bending Beam Rheometer ◽  
Modified Asphalt ◽  
Waste Engine Oil ◽  
Modified Asphalt Binder ◽  
Maximum Tensile Strain

This research aims to explore the high-temperature and low-temperature performances of lignin–waste engine oil-modified asphalt binder and its mixture. For this research, the lignin with two contents (4%, 6%) and waste engine oil with two contents (3%, 5%) were adopted to modify the control asphalt binder (PG 58-28). The high-temperature rheological properties of the lignin–waste engine oil-modified asphalt binder were investigated by the viscosity obtained by the Brookfield viscometer and the temperature sweep test by the dynamic shear rheometer. The low-temperature rheological property of the lignin–waste engine oil-modified asphalt binder was evaluated by the stiffness and m-value at two different temperatures (−18 °C, −12 °C) obtained by the bending beam rheometer. The high-temperature and the low-temperature performances of the lignin–waste engine oil-modified asphalt mixture were explored by the rutting test and low-temperature bending beam test. The results displayed that the rotational viscosity and rutting factor improved with the addition of lignin and decreased with the incorporation of waste engine oil. Adding the lignin into the control asphalt binder enhanced the elastic component while adding the waste engine oil lowered the elastic component of the asphalt binder. The stiffness of asphalt binder LO60 could not meet the requirement in the specification, but the waste engine oil made it reach the requirement based on the bending beam rheometer test. The waste engine oil could enhance the low-temperature performance. The dynamic stabilities of LO40- and LO60-modified asphalt mixture increased by about 9.05% and 17.41%, compared to the control mixture, respectively. The maximum tensile strain of LO45 and LO65 increased by 16.39% and 25.28% compared to that of LO40 and LO60, respectively. The high- and low-temperature performances of the lignin–waste engine oil-modified asphalt LO65 was higher than that of the control asphalt. The dynamic stability had a good linear relationship with viscosity, the rutting factor of the unaged at 58 °C, and the rutting factor of the aged at 58 °C, while the maximum tensile strain had a good linear relationship with m-value at −18 °C. This research provides a theoretical basis for the further applications of lignin–waste engine oil-modified asphalt.

scholarly journals MECHANICAL PERFORMANCE OF ASPHALT MIXTURE CONTAINING CUP LUMP RUBBER

2019 ◽  
Vol 81 (6) ◽  
Author(s):  
Norfazira Mohd Azahar ◽  
Norhidayah Abdul Hassan ◽  
Ramadhansyah Putra Jaya ◽  
Hasanan Md. Nor ◽  
Mohd Khairul Idham Mohd Satar ◽  
...  
Keyword(s):  
Mechanical Performance ◽  
Resilient Modulus ◽  
Permanent Deformation ◽  
Asphalt Binder ◽  
Asphalt Mixture ◽  
Modified Asphalt ◽  
Dynamic Creep ◽  
Aging Conditions ◽  
Public Work Department ◽  
Indirect Tensile

The use of cup lump rubber as an additive in asphalt binder has recently become the main interest of the paving industry. The innovation helps to increase the natural rubber consumption and stabilize the rubber price. This study evaluates the mechanical performance of cup lump rubber modified asphalt (CMA) mixture in terms of resilient modulus, dynamic creep and indirect tensile strength under aging conditions. The CMA mixture was prepared using dense-graded Marshall-designed mix and the observed behavior was compared with that of conventional mixture. From the results, both mixtures passed the volumetric properties as accordance to Malaysian Public Work Department (PWD) specification. The addition of cup lump rubber provides better resistance against permanent deformation through the enhanced properties of resilient modulus and dynamic creep. Furthermore, the resilient modulus of CMA mixture performed better under aging conditions.  

Research on the Application of Recycled PE in High Modulus Asphalt Mixture

2011 ◽  
Vol 287-290 ◽  
pp. 1155-1163
Author(s):  
Shao Long Huang ◽  
Fan Shen ◽  
Qing Jun Ding
Keyword(s):  
Molecular Weight ◽  
Dynamic Modulus ◽  
Asphalt Binder ◽  
Asphalt Mixture ◽  
High Temperature Deformation ◽  
Temperature Deformation ◽  
High Modulus ◽  
Normal Mixture ◽  
Modified Asphalt ◽  
Modified Asphalt Binder

In this paper, recycled PE was added directly to the asphalt mixture to prepare high modulus asphalt mixture. To study the influence of the dosage and molecular weight of recycled PE on the performance of asphalt mixture, three kinds of recycled PE with different molecular weight and three asphalt binders (Conventional, SBS Modified and PE Modified) were used to prepare eight kinds of asphalt mixture. Various tests, including dynamic modulus, wheel tracking and Lottman test, were conducted to evaluate the performance of them. The results showed that 1) the dynamic modulus of asphalt mixture modified by recycled PE is higher than the normal mixture and mixture prepared with SBS modified asphalt binder; 2) adding recycled PE directly into the asphalt mixture during mixing is more effective than preparing asphalt mixture with PE modified asphalt binder in making high modulus asphalt mixture; 3) the recycled PE used to produce high modulus asphalt mixture should have certain big molecular weight, more than 27,000, and the dosage of recycled PE should be no less than 0.4% of the total weight of asphalt mixture. The performance tests indicted the good high temperature deformation resistance property of asphalt mixture modified by recycled PE.

Highly Modified Asphalt Binder for Asphalt Crack Relief Mix

2017 ◽  
Vol 2630 (1) ◽  
pp. 110-117 ◽  
Author(s):  
Matheus S. Gaspar ◽  
Kamilla L. Vasconcelos ◽  
Amanda H. M. da Silva ◽  
Liedi L. B. Bernucci
Keyword(s):  
Hot Mix Asphalt ◽  
Asphalt Binder ◽  
Asphalt Mixture ◽  
Bending Test ◽  
Asphalt Binders ◽  
Reflective Cracking ◽  
Modified Asphalt ◽  
Asphalt Overlay ◽  
Modified Asphalt Binder ◽  
Styrene Butadiene

Reflective cracking is a common issue with respect to rehabilitated asphalt pavements, especially when the rehabilitation is done by applying a hot-mix asphalt overlay on the existing damaged pavement. Several approaches can be adopted to delay reflective cracking. They include an increase of the overlay thickness and the use of a stress relief asphalt mixture (SRAM), which is a fine-graded, flexible, and thin asphalt interlayer. Because the efficiency of a SRAM is highly related to the properties of the asphalt binder used in the mixture, it is of interest to use a highly modified asphalt (HiMA) binder. This paper describes a field test comprising three sections at BR-116 (a heavily trafficked highway in Brazil). One of the rehabilitation strategies used for a cracked asphalt pavement was a 2.5-cm SRAM (produced with a HiMA binder) and 5-cm styrene–butadiene–styrene (SBS) hot-mix asphalt (HMA). The other two strategies were to apply SBS HMA overlays of different thicknesses (7.5 cm and 10.5 cm). The aim was to evaluate and compare the capability of these solutions to control reflective cracking. Rheological properties and multiple stress creep and recovery tests were performed on the asphalt binders, and the semicircular bending test was performed on the asphalt mixtures. The surface conditions were monitored, and the results for each section were compared. After a 29-month period, the section that received the interlayer had the lowest cracked area and showed better resistance than the overlays did to reflective cracking and better maintenance of the original thickness of the pavement.

Sign in / Sign up

Export Citation Format

Share Document