Highly Modified Asphalt Binder for Asphalt Crack Relief Mix

2017 ◽  
Vol 2630 (1) ◽  
pp. 110-117 ◽  
Author(s):  
Matheus S. Gaspar ◽  
Kamilla L. Vasconcelos ◽  
Amanda H. M. da Silva ◽  
Liedi L. B. Bernucci
Keyword(s):  
Hot Mix Asphalt ◽  
Asphalt Binder ◽  
Asphalt Mixture ◽  
Bending Test ◽  
Asphalt Binders ◽  
Reflective Cracking ◽  
Modified Asphalt ◽  
Asphalt Overlay ◽  
Modified Asphalt Binder ◽  
Styrene Butadiene

Reflective cracking is a common issue with respect to rehabilitated asphalt pavements, especially when the rehabilitation is done by applying a hot-mix asphalt overlay on the existing damaged pavement. Several approaches can be adopted to delay reflective cracking. They include an increase of the overlay thickness and the use of a stress relief asphalt mixture (SRAM), which is a fine-graded, flexible, and thin asphalt interlayer. Because the efficiency of a SRAM is highly related to the properties of the asphalt binder used in the mixture, it is of interest to use a highly modified asphalt (HiMA) binder. This paper describes a field test comprising three sections at BR-116 (a heavily trafficked highway in Brazil). One of the rehabilitation strategies used for a cracked asphalt pavement was a 2.5-cm SRAM (produced with a HiMA binder) and 5-cm styrene–butadiene–styrene (SBS) hot-mix asphalt (HMA). The other two strategies were to apply SBS HMA overlays of different thicknesses (7.5 cm and 10.5 cm). The aim was to evaluate and compare the capability of these solutions to control reflective cracking. Rheological properties and multiple stress creep and recovery tests were performed on the asphalt binders, and the semicircular bending test was performed on the asphalt mixtures. The surface conditions were monitored, and the results for each section were compared. After a 29-month period, the section that received the interlayer had the lowest cracked area and showed better resistance than the overlays did to reflective cracking and better maintenance of the original thickness of the pavement.

scholarly journals Effect of PolyPhosphoric Acid on Rutting Resistance of Asphalt Concrete Mixture

2019 ◽  
Vol 5 (9) ◽  
pp. 1929-1940
Author(s):  
Hussein Burhan Raof ◽  
Mohammed Qadir Ismael
Keyword(s):  
Asphalt Binder ◽  
Asphalt Mixture ◽  
Evaluation Process ◽  
Asphalt Binders ◽  
Rutting Resistance ◽  
Ambient Temperatures ◽  
Modified Asphalt ◽  
Modified Asphalt Binder ◽  
Tracking Device ◽  
Wheel Tracking

The action of high repeated trucks load associated with dramatically elevated ambient temperatures leads to the most harmful distress in asphalt pavements occurred in Iraq known as rutting. Essentially, it is produced from the accumulation of irrecoverable strains, which mainly occurred in the asphalt layers. That visually demonstrated as a longitudinal depression in the wheel paths as well as small upheavals to the sides. Poly Phosphoric Acid (PPA) has been used as a means of producing modified asphalt binders and the interest to use it has increased in recent years. The PPA provides modified asphalt binder, which is relatively cheaply produced compared to polymer-modified asphalt. In this paper, PPA was used by three-percentages 1, 2 and 3 % of the weight of asphalt binder. Two asphalt binder grades were used in this study, 40-50 and 60 -70.  The evaluation process based on conducting Marshall Test, Compressive strength test and the Wheel Tracking test. The optimum asphalt content was determined for eight asphalt mixture. The results of the index of retained strength of modified asphalt were slightly increased compared with conventional mixtures. The rut depth was determined by using wheel tracking device at different temperature (45 and 55 ºC) for each asphalt mixture under 10000 cycles and the results showed that modified asphalt with PPA produced mixtures with more rutting resistance than conventional asphalt mixture. Moreover, the effect of PPA on rutting resistance for asphalt grade 60-70 was higher than asphalt grade 40-50.

scholarly journals Evaluation of High-Performance Asphalt Binders Modified with SBS, SIS, and GTR

2019 ◽  
Vol 2019 ◽  
pp. 1-11 ◽  
Author(s):  
Hyun Hwan Kim ◽  
Mithil Mazumder ◽  
Moon-Sup Lee ◽  
Soon-Jae Lee
Keyword(s):  
High Performance ◽  
Asphalt Binder ◽  
Microstructural Analysis ◽  
Asphalt Binders ◽  
Creep Recovery ◽  
Rotational Viscometer ◽  
Modified Asphalt ◽  
Modified Asphalt Binder ◽  
Polymer Modified Asphalt ◽  
Styrene Butadiene

In this study, performance properties of polymer-modified asphalt (PMA) binders are evaluated depending on ground tire rubber (GTR) and styrene-isoprene-styrene (SIS). Styrene-butadiene-styrene- (SBS-) modified asphalt binder of PG 76-22 is used as a base binder to manufacture the rubberized PMA binder. The rubberized PMA binders are blended using SIS modifier. The binders were artificially short-term and long-term aged using rolling thin-film oven (RTFO) and pressure aging vessel (PAV) procedures. Superpave binder tests were conducted on the binders through rotational viscometer (RV), dynamic shear rheometer (DSR), and bending beam rheometer (BBR). Furthermore, multiple stress creep recovery (MSCR) test and atomic force microscopy (AFM) microstructural analysis were performed. The results of this study indicated that (1) the viscosity properties seem to be highly dependent on GTR and SIS contents, (2) the addition of SIS is observed to have a significant effect on improving the rutting performances of rubberized PMA binders, (3) the cracking properties are considered to be improved significantly through SIS modification, and (4) in general, the rubberized PMA binders with SIS showed the best performance for rutting and cracking among all the binders used in this study.

scholarly journals Influence of the Skid Resistance of Ultrathin Wearing Course with Various Types of Asphalt Binders

2020 ◽  
Vol 2020 ◽  
pp. 1-12
Author(s):  
Hongfu Liu ◽  
Teng Guo ◽  
Chenxi Yang ◽  
Yunyong Huang ◽  
Xuelian Li
Keyword(s):  
Asphalt Binder ◽  
Asphalt Mixture ◽  
Asphalt Binders ◽  
Asphalt Pavements ◽  
Skid Resistance ◽  
Modified Asphalt ◽  
Vehicle Loading ◽  
Before And After ◽  
Warm Mix Additives ◽  
Styrene Butadiene

Ultrathin wearing course (UTWC) has been widely applied in both asphalt pavements preventive maintenance and functional overlay. This study’s objective is to evaluate the influence of different modified asphalt binders with warm mix additives on the skid resistance of UTWC and to reveal the attenuation law of skid resistance of UTWC. Three types of modified asphalt binders (Styrene-Butadiene-Styrene- (SBS-) modified asphalt, Acrylester Rubber- (AR-) modified asphalt, and SinoTPS-modified asphalt) and sasobit warm mix asphalt additive were selected to prepare asphalt mixtures. The Model Mobile Load Simulator 3 (MMLS3) was used to simulate repeated vehicle loading and abrasion. The British Pendulum Number (BPN) and Mean Texture Depth (MTD) were chosen to evaluate the skid resistance of the UTWC. The Analysis of Range (ANOR) and Analysis of Variance (ANOVA) were used to verify the significance of asphalt binder on the antiskid performance of the UTWC. ANOR and ANOVA show that the influence of different modified asphalt binders on the skid resistance of the UTWC is significant. The SinoTPS modified asphalt mixture can maintain high texture roughness before and after abrasion, providing excellent and durable skid resistance. The influence of the addition of a warm mixing additive on the skid resistance of UTWC is not significant, and changes in microtexture mainly reflect its impact on antiskid performance. The decay curve of three modified asphalt binders of the skid resistance of the UTWC can be well fitted into an exponential function. The conclusion will play an essential role in selecting the asphalt binder in a UTWC to improve the antiskid performance.

scholarly journals A Review on Improving Asphalt Pavement Service Life Using Gilsonite-Modified Bitumen

2021 ◽  
Vol 13 (12) ◽  
pp. 6634
Author(s):  
Hayder Al Hawesah ◽  
Monower Sadique ◽  
Clare Harris ◽  
Hassan Al Nageim ◽  
Karl Stopp ◽  
...  
Keyword(s):  
Rheological Properties ◽  
Hot Mix Asphalt ◽  
Asphalt Binder ◽  
Asphalt Mixture ◽  
Asphalt Mixtures ◽  
Asphalt Binders ◽  
Modified Bitumen ◽  
Dry Process ◽  
Modified Asphalt ◽  
Wet Process

Hot mix asphalt has various benefits such as good workability and durability. It is one of the most general materials used as asphalt mixtures in road pavements. Asphalt mixtures and binders can be improved by modifying them with various additives. Gilsonite is a natural asphalt hydrocarbon which may be used as an additive to hot mix asphalt. It is used as an asphalt binder modifier (wet process) and an asphalt mixture modifier (dry process) to improve the properties of the mix. It provides the option of improved rheological properties, stability, strength rutting resistance and moisture sensitivity. This paper examines the current research relating to the use of gilsonite to improve the asphalt properties (binder and mixture). The rheological properties of the modified asphalt binders and mechanical properties of the modified asphalt mixtures will be reviewed. The influence of adding gilsonite individually or combined with other additives will be discussed. Furthermore, assessment of the environmental and economic perspectives of the studied asphalt along with some suggestions to improve the asphalt binders and mixtures will be explored.

Performance of Nanomodified Asphalt Binder and Mixture

2013 ◽  
Vol 721 ◽  
pp. 219-223
Author(s):  
Bang Yan Tang ◽  
Hui Yao ◽  
Yu Feng ◽  
Xu Dong Hu
Keyword(s):  
Resilient Modulus ◽  
Asphalt Binder ◽  
Asphalt Mixture ◽  
Asphalt Binders ◽  
Test Results ◽  
Modified Asphalt ◽  
Cleavage Strength ◽  
Modified Asphalt Binder ◽  
Overall Performance ◽  
Water Susceptibility

The nanopowdered VP108 was selected and applied into the base asphalt binder and mixture. The Marshall binder and mixture tests were conducted to evaluate the mechanical and pavement performance of base and VP108 modified asphalt binders and mixtures. The test results present that the penetration, softening point, penetration index and ductility of VP108 modified asphalt binder improved compared to the base asphalt binder. The mixture test results display that the compression strength, water susceptibility, resilient modulus and cleavage strength of VP108 modified asphalt mixture enhance compared to the base asphalt mixture. Therefore, the overall performance of VP108 modified asphalt binder and mixture improves compared to the base asphalt binder and mixture, such as the high temperature performance, resilient modulus and water resistance property.

Investigation of Rheological Characteristics of Carbon Fiber Modified Asphalt Binder

2014 ◽  
Vol 599 ◽  
pp. 182-186 ◽  
Author(s):  
Ling Pang ◽  
Peng Wang ◽  
Bo Li ◽  
Pan Pan ◽  
Shao Peng Wu
Keyword(s):  
Carbon Fiber ◽  
Dimensional Space ◽  
Asphalt Binder ◽  
Asphalt Mixture ◽  
Interface Reaction ◽  
Space Structure ◽  
Asphalt Binders ◽  
Rheological Characteristics ◽  
Modified Asphalt ◽  
Modified Asphalt Binder

The performance of asphalt concrete is strongly dependent on the rheological properties of asphalt binders. In this paper, PAN carbon fiber was employed to improve the conductivity of asphalt mixture. To better understand the performance of conductive asphalt mixture, the present study investigated the rheological characteristics of asphalt binders containing PAN carbon fiber. Additionally, scanning electron microscopy (SEM) was used to elucidate the microstructure and interface reaction between the asphalt and the PAN carbon fiber. Experimental results showed that carbon fibers in the asphalt can overlap each other and form a three-dimensional space structure, which could transfer and buffer the stress. Moreover, the addition of PAN carbon fiber increases the complex shear modulus of modified asphalt binders, which means higher resistance to the permanent deformation. Furthermore, the reduction of phase angle implied the increment of elastic portion in the visco-elastic of carbon modified asphalt binder.

scholarly journals Evaluating the Rheological, Chemical and Morphological Properties of SBS Modified Asphalt-Binder under Multiple Aging and Rejuvenation Cycles

2021 ◽  
Vol 11 (19) ◽  
pp. 9242
Author(s):  
Xiaobing Chen ◽  
Yunfeng Ning ◽  
Yongming Gu ◽  
Ronglong Zhao ◽  
Jinhu Tong ◽  
...  
Keyword(s):  
Asphalt Binder ◽  
Morphological Properties ◽  
Asphalt Binders ◽  
Laboratory Simulation ◽  
Fatigue Properties ◽  
Type I ◽  
Modified Asphalt ◽  
Modified Asphalt Binder ◽  
Microscopic Morphology ◽  
Sbs Modified Asphalt

To investigate the influence of multiple cycles of aging and rejuvenation on the rheological, chemical, and morphological properties of styrene–butadiene–styrene (SBS)-modified asphalt-binders, the asphalt-binders were aged using two laboratory simulation methods, namely a rolling thin film oven (RTFO) test for short-term aging and pressure aging vessel (PAV) for long-term aging. The asphalt-binders were then rejuvenated with three types of rejuvenators (Type I, II, and III) with different dosages (i.e., 6%, 10%, and 14% for the first, second, and third rejuvenation, respectively). A dynamic shear rheometer (DSR) was then used to analyze the effect of rejuvenators on the rheological properties of all the asphalt-binders. The changes in the functional groups and microscopic morphology in the process of multiple aging and rejuvenation cycles were studied using Fourier transform infrared (FTIR) and atomic force microscopy (AFM). The results indicated that the three rejuvenators could soften the stiffness and restore the microstructures of the aged asphalt-binders in the process of repeated aging and rejuvenation from DSR and AFM testing. Considering the rutting and fatigue properties, the Type I rejuvenator exhibited the potential to achieve the desired rejuvenation effects under multiple rejuvenation cycles. During the multiple aging and rejuvenation cycles, the aging resistance of SBSMA decreased gradually from the FTIR results. This inherently limited the number of repeated rejuvenation cycles. This research is conducive to promoting the application of repeated penetrating rejuvenation.

scholarly journals Evaluation of Selected Performance Properties of Nanoclay-Modified Asphalt Binders

2019 ◽  
Vol 271 ◽  
pp. 03006
Author(s):  
Mohammad N. Hassan ◽  
M M Tariq Morshed ◽  
Zahid Hossain
Keyword(s):  
Colloidal Stability ◽  
Asphalt Binder ◽  
Weather Conditions ◽  
Good Alternative ◽  
Asphalt Binders ◽  
Chemical Compositions ◽  
Modified Asphalt ◽  
Adverse Weather ◽  
Modified Asphalt Binder ◽  
Improved Performance

Asphalt binders are often modified with additives such as acid, polymer, or a combination of multiple additives to achieve improved performance to sustain heavy loads and adverse weather conditions. According to some previous researches, nanoclay can be a good alternative of currently practiced Styrene-Butadiene-Styrene (SBS) modification, and the former is expected to reduce the overall cost of the asphalt binder. Three types of nanoclay (Cloisite 10A, 11B, and 15A) were blended with asphalt binders prepared from two different sources (Arabian Crude and Canadian Crude). A blending protocol has been developed to blend nanoclay with the base binders. Mechanical properties including viscosity, rutting parameter have undergone significant changes after the nanoclay modification. It was also observed that nanoclay modified binders offer different moisture susceptibility while bonding with different aggregates; the nanoclay modified asphalt binder exhibits better bonding with gravel than sandstone. Mechanistic properties such as viscosity and rutting parameter are found to be highly correlated with the chemical compositions. Binders from the Canadian crude showed more colloidal stability than binders from the Arabian crude after nanoclay modification.

Sign in / Sign up

Export Citation Format

Share Document