scholarly journals Identification of Microseismic Signals Based on Multiscale Singular Spectrum Entropy

2020 ◽  
Vol 2020 ◽  
pp. 1-12
Author(s):  
Xingli Zhang ◽  
Zhenhua Zhao ◽  
Ruisheng Jia ◽  
Lianyue Cao
Keyword(s):  
Support Vector ◽  
Signal Identification ◽  
Identification Performance ◽  
Accurate Identification ◽  
Vibration Signals ◽  
Singular Spectrum ◽  
Mode Decomposition ◽  
Microseismic Events ◽  
Different Characteristics ◽  
Microseismic Signal

The accurate identification of effective microseismic events has great significance in the monitoring, early warning, and forecasting of rockburst hazards. However, the conventional identification methods have displayed difficulties in achieving satisfactory results. A microseismic signal identification method which combines variational mode decomposition (VMD) and multiscale singular spectrum entropy was proposed in this paper. The original signal was firstly broken down into a given number K variational mode components, which are ranked by frequency in descending order. Then, the characteristic pattern matrix was constructed according to the mode component signals, and the identification model of the microseismic signals based on the support vector machine was built by performing a multiscale singular spectrum entropy calculation of the collected vibration signals, constructing eigenvectors of signals. Finally, a comparative analysis of the microseismic events and blasting vibration signals in the experiment proved that the different characteristics of the two kinds of signals can be fully expressed by using multiscale singular spectrum entropy. Experimental results further confirmed the effective identification performance of this proposed method.

scholarly journals Fused Deep Features-Based Grape Varieties Identification Using Support Vector Machine

Agriculture ◽  
2021 ◽  
Vol 11 (9) ◽  
pp. 869
Author(s):  
Yun Peng ◽  
Shenyi Zhao ◽  
Jizhan Liu
Keyword(s):  
Support Vector Machine ◽  
Single Type ◽  
Support Vector ◽  
Svm Classifier ◽  
Identification Performance ◽  
Accurate Identification ◽  
Classification Feature ◽  
Deep Feature ◽  
Different Characteristics ◽  
Grape Varieties

Proper identification of different grape varieties by smart machinery is of great importance to modern agriculture production. In this paper, a fast and accurate identification method based on Canonical Correlation Analysis (CCA), which can fuse different deep features extracted from Convolutional Neural Network (CNN), plus Support Vector Machine (SVM) is proposed. In this research, based on an open dataset, three types of state-of-the-art CNNs, seven species of deep features, and a multi-class SVM classifier were studied. First, the images were resized to meet the input requirements of a CNN. Then, the deep features of the input images were extracted by a specific deep features layer of the CNN. Next, two kinds of deep features from different networks were fused by CCA to increase the effective classification feature information. Finally, a multi-class SVM classifier was trained with the fused features. When applied to an open dataset, the model outcome shows that the fused deep features with any combination can obtain better identification performance than by using a single type of deep feature. The fusion of fc6 (in AlexNet network) and Fc1000 (in ResNet50 network) deep features obtained the best identification performance. The average F1 Score of 96.9% was 8.7% higher compared to the best performance of a single deep feature, i.e., Fc1000 of ResNet101, which was 88.2%. Furthermore, the F1 Score of the proposed method is 2.7% higher than the best performance obtained by using a CNN directly. The experimental results show that the method proposed in this paper can achieve fast and accurate identification of grape varieties. Based on the proposed algorithm, the smart machinery in agriculture can take more targeted measures based on the different characteristics of different grape varieties for further improvement of the yield and quality of grape production.

scholarly journals Gearbox Fault Diagnosis Using Complementary Ensemble Empirical Mode Decomposition and Permutation Entropy

2016 ◽  
Vol 2016 ◽  
pp. 1-8 ◽  
Author(s):  
Liye Zhao ◽  
Wei Yu ◽  
Ruqiang Yan
Keyword(s):  
Fault Diagnosis ◽  
Empirical Mode Decomposition ◽  
Correlation Coefficients ◽  
Ensemble Empirical Mode Decomposition ◽  
Permutation Entropy ◽  
Support Vector ◽  
Svm Classifier ◽  
Intrinsic Mode Functions ◽  
Vibration Signals ◽  
Mode Decomposition

This paper presents an improved gearbox fault diagnosis approach by integrating complementary ensemble empirical mode decomposition (CEEMD) with permutation entropy (PE). The presented approach identifies faults appearing in a gearbox system based on PE values calculated from selected intrinsic mode functions (IMFs) of vibration signals decomposed by CEEMD. Specifically, CEEMD is first used to decompose vibration signals characterizing various defect severities into a series of IMFs. Then, filtered vibration signals are obtained from appropriate selection of IMFs, and correlation coefficients between the filtered signal and each IMF are used as the basis for useful IMFs selection. Subsequently, PE values of those selected IMFs are utilized as input features to a support vector machine (SVM) classifier for characterizing the defect severity of a gearbox. Case study conducted on a gearbox system indicates the effectiveness of the proposed approach for identifying the gearbox faults.

scholarly journals Mechanical Fault Diagnosis for HV Circuit Breakers Based on Ensemble Empirical Mode Decomposition Energy Entropy and Support Vector Machine

2015 ◽  
Vol 2015 ◽  
pp. 1-6 ◽  
Author(s):  
Jianfeng Zhang ◽  
Mingliang Liu ◽  
Keqi Wang ◽  
Laijun Sun
Keyword(s):  
Support Vector Machine ◽  
Fault Diagnosis ◽  
Circuit Breaker ◽  
Vibration Signal ◽  
Ensemble Empirical Mode Decomposition ◽  
Support Vector ◽  
Time Segment ◽  
Vibration Signals ◽  
Equal Time ◽  
Mode Decomposition

During the operation process of the high voltage circuit breaker, the changes of vibration signals can reflect the machinery states of the circuit breaker. The extraction of the vibration signal feature will directly influence the accuracy and practicability of fault diagnosis. This paper presents an extraction method based on ensemble empirical mode decomposition (EEMD). Firstly, the original vibration signals are decomposed into a finite number of stationary intrinsic mode functions (IMFs). Secondly, calculating the envelope of each IMF and separating the envelope by equal-time segment and then forming equal-time segment energy entropy to reflect the change of vibration signal are performed. At last, the energy entropies could serve as input vectors of support vector machine (SVM) to identify the working state and fault pattern of the circuit breaker. Practical examples show that this diagnosis approach can identify effectively fault patterns of HV circuit breaker.

scholarly journals Rolling Bearings Fault Diagnosis Based on Improved Complete Ensemble Empirical Mode Decomposition with Adaptive Noise, Nonlinear Entropy, and Ensemble SVM

2020 ◽  
Vol 10 (16) ◽  
pp. 5542 ◽  
Author(s):  
Rui Li ◽  
Chao Ran ◽  
Bin Zhang ◽  
Leng Han ◽  
Song Feng
Keyword(s):  
Fault Diagnosis ◽  
Empirical Mode Decomposition ◽  
Economic Loss ◽  
Ensemble Empirical Mode Decomposition ◽  
Support Vector ◽  
Rolling Bearings ◽  
Vibration Signals ◽  
Operational Conditions ◽  
Mode Decomposition ◽  
Adaptive Noise

Rolling bearings are fundamental elements that play a crucial role in the functioning of rotating machines; thus, fault diagnosis of rolling bearings is of great significance to reduce catastrophic failures and heavy economic loss. However, the vibration signals of rolling bearings are often nonlinear and nonstationary, resulting in difficulty for feature extraction and fault recognition. In this paper, a hybrid method for multiple fault diagnosis of rolling bearings is presented. The bearing vibration signals are decomposed with the improved complete ensemble empirical mode decomposition with adaptive noise (ICEEMDAN) to denoise and extract nonlinear entropy features. The nonlinear entropy features are further processed to select the more discriminative fault features and to reduce feature dimension. Then a multi-class intelligent recognition model based on ensemble support vector machine (ESVM) is constructed to diagnose different bearing fault modes as well as fault severities. The effectiveness of the proposed method is assessed via experimental case studies of rolling bearings under multiple operational conditions (i.e., speeds and loads). The results show that our method gives better diagnosis results as compared to some existing approaches.

A gearbox fault diagnosis method based on frequency-modulated empirical mode decomposition and support vector machine

2016 ◽  
Vol 232 (2) ◽  
pp. 369-380 ◽  
Author(s):  
Chao Zhang ◽  
Zhongxiao Peng ◽  
Shuai Chen ◽  
Zhixiong Li ◽  
Jianguo Wang
Keyword(s):  
Support Vector Machine ◽  
Fault Diagnosis ◽  
Empirical Mode Decomposition ◽  
Vibration Signal ◽  
Dynamic State ◽  
Support Vector ◽  
Intrinsic Mode Functions ◽  
Vibration Signals ◽  
Mode Decomposition ◽  
Diagnosis Method

During the operation process of a gearbox, the vibration signals can reflect the dynamic states of the gearbox. The feature extraction of the vibration signal will directly influence the accuracy and effectiveness of fault diagnosis. One major challenge associated with the extraction process is the mode mixing, especially under such circumstance of intensive frequency. A novel fault diagnosis method based on frequency-modulated empirical mode decomposition is proposed in this paper. Firstly, several stationary intrinsic mode functions can be obtained after the initial vibration signal is processed using frequency-modulated empirical mode decomposition method. Using the method, the vibration signal feature can be extracted in unworkable region of the empirical mode decomposition. The method has the ability to separate such close frequency components, which overcomes the major drawback of the conventional methods. Numerical simulation results showed the validity of the developed signal processing method. Secondly, energy entropy was calculated to reflect the changes in vibration signals in relation to faults. At last, the energy distribution could serve as eigenvector of support vector machine to recognize the dynamic state and fault type of the gearbox. The analysis results from the gearbox signals demonstrate the effectiveness and veracity of the diagnosis approach.

Study on Mechanical Fault Diagnosis Based on IMF Complexity Feature and Support Vector Machine

2012 ◽  
Vol 246-247 ◽  
pp. 37-42
Author(s):  
Wei Dong Liu ◽  
Hu Sheng Wu
Keyword(s):  
Support Vector Machine ◽  
Fault Diagnosis ◽  
Support Vector ◽  
Svm Classifier ◽  
Intrinsic Mode Functions ◽  
Mutual Correlation ◽  
Vibration Signals ◽  
Comparative Tests ◽  
Mode Decomposition ◽  
Diagnosis Method

According to the non-stationarity characteristics of the vibration signals from reciprocating machinery,a fault diagnosis method based on empirical mode decomposition,Lempel-Ziv complexity and support vector machine(SVM) is proposed.Firstly,the vibration signals were decomposed into a finite number of intrinsic mode functions(IMF), then choosed some IMF components with the criteria of mutual correlation coefficient between IMF components and denoised signal.Thirdly the complexity feature of each IMF component was calculated as faulty eigenvector and served as input of SVM classifier so that the faults of machine are classified.Practical experimental data is used to verify this method,and the diagnosis results and comparative tests fully validate its effectiveness and generalization abilities.

scholarly journals Fault Diagnosis of Hydraulic Pumps Using PSO-VMD and Refined Composite Multiscale Fluctuation Dispersion Entropy

2020 ◽  
Vol 2020 ◽  
pp. 1-13 ◽  
Author(s):  
Fuming Zhou ◽  
Xiaoqiang Yang ◽  
Jinxing Shen ◽  
Wuqiang Liu
Keyword(s):  
Particle Swarm Optimization ◽  
Fault Diagnosis ◽  
Particle Swarm ◽  
Support Vector ◽  
Dynamic Features ◽  
Complex Signals ◽  
Swarm Optimization ◽  
Vibration Signals ◽  
Mode Decomposition ◽  
Fault Recognition

Multiscale fluctuation dispersion entropy (MFDE) has been proposed to measure the dynamic features of complex signals recently. Compared with multiscale sample entropy (MSE) and multiscale fuzzy entropy (MFE), MFDE has higher calculation efficiency and better performance to extract fault features. However, when conducting multiscale analysis, as the scale factor increases, MFDE will become unstable. To solve this problem, refined composite multiscale fluctuation dispersion entropy (RCMFDE) is proposed and used to improve the stability of MFDE. And a new fault diagnosis method for hydraulic pumps using particle swarm optimization variational mode decomposition (PSO-VMD) and RCMFDE is proposed in this paper. Firstly, PSO-VMD is adopted to process the original vibration signals of hydraulic pumps, and the appropriate components are selected and reconstructed to get the denoised vibration signals. Then, RCMFDE is adopted to extract fault information. Finally, particle swarm optimization support vector machine (PSO-SVM) is adopted to distinguish different work states of hydraulic pumps. The experiments prove that the proposed method has higher fault recognition accuracy in comparison with MSE, MFE, and MFDE.

scholarly journals Machine Learning Based Identification of Microseismic Signals Using Characteristic Parameters

Sensors ◽  
2021 ◽  
Vol 21 (21) ◽  
pp. 6967
Author(s):  
Kang Peng ◽  
Zheng Tang ◽  
Longjun Dong ◽  
Daoyuan Sun
Keyword(s):  
Machine Learning ◽  
Logistic Regression ◽  
Random Forest ◽  
Decision Tree ◽  
Naive Bayes ◽  
Microseismic Monitoring ◽  
Signal Identification ◽  
Training Set ◽  
Microseismic Events ◽  
Microseismic Signal

Microseismic monitoring system is one of the effective means to monitor ground stress in deep mines. The accuracy and speed of microseismic signal identification directly affect the stability analysis in rock engineering. At present, manual identification, which heavily relies on manual experience, is widely used to classify microseismic events and blasts in the mines. To realize intelligent and accurate identification of microseismic events and blasts, a microseismic signal identification system based on machine learning was established in this work. The discrimination of microseismic events and blasts was established based on the machine learning framework. The microseismic monitoring data was used to optimize the parameters and validate the classification methods. Subsequently, ten machine learning algorithms were used as the preliminary algorithms of the learning layer, including the Decision Tree, Random Forest, Logistic Regression, SVM, KNN, GBDT, Naive Bayes, Bagging, AdaBoost, and MLP. Then, training set and test set, accounting for 50% of each data set, were prospectively examined, and the ACC, PPV, SEN, NPV, SPE, FAR and ROC curves were used as evaluation indexes. Finally, the performances of these machine learning algorithms in microseismic signal identification were evaluated with cross-validation methods. The results showed that the Logistic Regression classifier had the best performance in parameter identification, and the accuracy of cross-validation can reach more than 0.95. Random Forest, Decision Tree, and Naive Bayes also performed well in this data set. There were some differences in the accuracy of different classifiers in the training set, test set, and all data sets. To improve the accuracy of signal identification, the database of microseismic events and blasts should be expanded, to avoid the inaccurate data distribution caused by the small training set. Artificial intelligence identification methods, including Random Forest, Logistic Regression, Decision Tree, Naive Bayes, and AdaBoost algorithms, were applied to signal identification of the microseismic monitoring system in mines, and the identification results were consistent with the actual situation. In this way, the confusion caused by manual classification between microseismic events and blasts based on the characteristics of waveform signals is solved, and the required source parameters are easily obtained, which can ensure the accuracy and timeliness of microseismic events and blasts identification.

scholarly journals Application of SVM and SVD Technique Based on EMD to the Fault Diagnosis of the Rotating Machinery

2009 ◽  
Vol 16 (1) ◽  
pp. 89-98 ◽  
Author(s):  
Junsheng Cheng ◽  
Dejie Yu ◽  
Jiashi Tang ◽  
Yu Yang
Keyword(s):  
Fault Diagnosis ◽  
Feature Vector ◽  
Roller Bearing ◽  
Vibration Signal ◽  
Singular Values ◽  
Rotating Machinery ◽  
Support Vector ◽  
Intrinsic Mode Functions ◽  
Vibration Signals ◽  
Mode Decomposition

Targeting the characteristics that periodic impulses usually occur whilst the rotating machinery exhibits local faults and the limitations of singular value decomposition (SVD) techniques, the SVD technique based on empirical mode decomposition (EMD) is applied to the fault feature extraction of the rotating machinery vibration signals. The EMD method is used to decompose the vibration signal into a number of intrinsic mode functions (IMFs) by which the initial feature vector matrices could be formed automatically. By applying the SVD technique to the initial feature vector matrices, the singular values of matrices could be obtained, which could be used as the fault feature vectors of support vector machines (SVMs) classifier. The analysis results from the gear and roller bearing vibration signals show that the fault diagnosis method based on EMD, SVD and SVM can extract fault features effectively and classify working conditions and fault patterns of gears and roller bearings accurately even when the number of samples is small.

scholarly journals Rope Tension Fault Diagnosis in Hoisting Systems Based on Vibration Signals Using EEMD, Improved Permutation Entropy, and PSO-SVM

Entropy ◽  
2020 ◽  
Vol 22 (2) ◽  
pp. 209 ◽  
Author(s):  
Shaohua Xue ◽  
Jianping Tan ◽  
Lixiang Shi ◽  
Jiwei Deng
Keyword(s):  
Fault Diagnosis ◽  
Vibration Signal ◽  
Ensemble Empirical Mode Decomposition ◽  
Permutation Entropy ◽  
Support Vector ◽  
Sensitivity Index ◽  
Intrinsic Mode Functions ◽  
Vibration Signals ◽  
Mode Decomposition ◽  
New Perspective

Fault diagnosis of rope tension is significantly important for hoisting safety, especially in mine hoists. Conventional diagnosis methods based on force sensors face some challenges regarding sensor installation, data transmission, safety, and reliability in harsh mine environments. In this paper, a novel fault diagnosis method for rope tension based on the vibration signals of head sheaves is proposed. First, the vibration signal is decomposed into some intrinsic mode functions (IMFs) by the ensemble empirical mode decomposition (EEMD) method. Second, a sensitivity index is proposed to extract the main IMFs, then the de-noised signal is obtained by the sum of the main IMFs. Third, the energy and the proposed improved permutation entropy (IPE) values of the main IMFs and the de-noised signal are calculated to create the feature vectors. The IPE is proposed to improve the PE by adding the amplitude information, and it proved to be more sensitive in simulations of impulse detecting and signal segmentation. Fourth, vibration samples in different tension states are used to train a particle swarm optimization–support vector machine (PSO-SVM) model. Lastly, the trained model is implemented to detect tension faults in practice. Two experimental results validated the effectiveness of the proposed method to detect tension faults, such as overload, underload, and imbalance, in both single-rope and multi-rope hoists. This study provides a new perspective for detecting tension faults in hoisting systems.

Sign in / Sign up

Export Citation Format

Share Document