scholarly journals Yield and Growth Response of Maize (Zea mays L.) to Varietal and Nitrogen Application in the Guinea Savanna Agro-Ecology of Ghana

2021 ◽  
Vol 2021 ◽  
pp. 1-8
Author(s):  
Alhassan Bawa
Keyword(s):  
Grain Yield ◽  
Agronomic Traits ◽  
Growth Parameters ◽  
Block Design ◽  
Nitrogen Application ◽  
Maize Production ◽  
Guinea Savanna ◽  
Application Rates ◽  
Two Factors ◽  
Four Levels

Background and Objective. Maize is one of the oldest cultivated crops. It is the third most important cereal after wheat and rice globally. Compared to all other cereals, maize has the highest average yield per unit area. The objective of the research was to evaluate maize varietal response to different nitrogen fertilizer rates. Materials and Methods. The treatment consisted of two factors, namely six varieties of maize and four levels of nitrogen application rates. These were arranged in 6 × 4 factorial combinations and laid out using randomized complete block design (RCBD) with three replications. The data collected were subjected to combined analysis for variation in factorial experiments in RCBD using Genstat statistical package edition 18. The means were separated using Duncan’s multiple range test at a 5% probability level. Results. The study revealed that varieties, such as IWD-C3-SYN-F2 and OBATAMPA, produced the highest grain yield and growth parameters (agronomic traits) relative to other varieties. The maximum grain yield and biomass production also occurred at the nitrogen application rates of 90 and 120 kg N/ha. Conclusion. Varieties, such as IWD-C3-SYN-F2 and OBATAMPA, and N rate of 90 kg N/ha are, therefore, recommended to be used for maize production by the resource-poor farmers in the Guinea Savanna Agro-Ecology of Ghana.

scholarly journals Grain Yield of Maize Hybrids in Response to Inoculation with Azospirillum sp. under Nitrogen Limiting Conditions in Huaura, Peru

2020 ◽  
Vol 10 (1) ◽  
pp. 1
Author(s):  
Elin Teodoro-Cerna ◽  
Eroncio Mendoza-Nieto ◽  
Sergio Eduardo Contreras-Liza
Keyword(s):  
Grain Yield ◽  
Agronomic Traits ◽  
Block Design ◽  
N Fertilization ◽  
Corn Hybrids ◽  
Maize Production ◽  
Native Strain ◽  
Hybrid Corn ◽  
Nitrogen Levels ◽  
Hybrid Maize

This experiment was conducted to evaluate the effect of Azospirillum sp. inoculated with different nitrogen levels (0, 60, 90, 180 kg ha-1) on grain yield, yield components and agronomic traits of hybrid maize at the arid conditions of the central coast of Peru. The experimental design used was randomized complete block design with four replications per treatment, under the arrangement of subdivided plots, in which three corn hybrids were assigned to complete plots and four inoculant-N fertilization treatments, to the subplots. The results showed that for dose fertilization of 180 kg ha-1 of nitrogen (control), the grain yield of hybrid corn was similar as compared to 60-120 kg ha-1 N fertilization inoculated at 15 and 45 days with a native strain of Azospirillum sp., suggesting that the response in grain yield for hybrid corn can be balanced with nitrogen fertilization and inoculation with Azospirillum sp. 1x108 CFU mL-1 in conditions of arid soils, with possible impact on the use of this microorganism in the maize production system

scholarly journals Enhancing rice yield in acidic soil through liming and fertilizer management

2018 ◽  
Vol 16 (3) ◽  
pp. 357-365
Author(s):  
Syeda Ariana Ferdous ◽  
Mohammad Noor Hossain Miah ◽  
Mozammel Hoque ◽  
Sazzad Hossain ◽  
Ahmed Khairul Hasan
Keyword(s):  
Grain Yield ◽  
Crop Production ◽  
Growth Parameters ◽  
Block Design ◽  
Fertilizer Application ◽  
Chemical Fertilizer ◽  
Acidic Soil ◽  
Growth And Yield ◽  
Treatment Combination ◽  
Four Levels

The effect of lime and fertilizer application, as the management of soil acidity, on the growth and yield of rice cv. BRRI dhan50 was investigated during Aman rice season at the Agronomy Field Laboratory of Sylhet Agricultural University, Bangladesh. The experiment was consisted of two factors namely lime and fertilizer. There were four levels of lime (0, 0.50, 1.00, and 1.50 t ha–1 of CaCO3.MgCO3) and three levels of fertilizers (control, FYM @ 10 t ha–1, and chemical fertilizer @ 100-30-42-4-3-0.4 kg ha–1 of N-P-K-Ca-S-Zn). The experiment was laid out in a randomized complete block design with three replications where the unit plot size was 4.0 m x 2.5 m. Growth parameters, yield components and yield of BRRIdhan 50 rice increased with increasing lime rate in association of fertilizer in acidic soil. The highest grain yield (2.90 t ha–1) was recorded from the application of 1.50 t ha–1 lime and the lowest (2.06 t ha–1) was from control (0t ha–1), irrespective of fertilizer. On the other hand, the best effect of fertilizers on grain yield (3.08 t ha–1) was found with the application of FYM @ 10 t ha–1 and the lowest yield (1.59 t ha–1) was in control. The treatment combination of lime 1.50 t ha–1 and FYM (@ 10 t ha–1 produced the highest grain yield (3.60 t ha–1), which was followed by treatment combination of lime 1.50 t ha–1 and chemical fertilizer @ 100-30-42-4-3-0.4 kg ha–1 of N-P-K-Ca-S-Zn (3.28 t ha–1). Additionally, application of lime and FYM improved the soil fertility and properties of acidic soil for crop production by increasing the pH, organic matter and availability of some essential nutrients. From the study, it was indicated that both FYM and lime could affect to enhance the grain yield of rice in acidic soil. J. Bangladesh Agril. Univ. 16(3): 357–365, December 2018

scholarly journals Effect of different levels of nitrogen on growth and yield of hybrid maize (Zea mays L.) varieties

2021 ◽  
Vol 4 (2) ◽  
pp. 48-62
Author(s):  
Kripa Adhikari ◽  
Sudip Bhandari ◽  
Krishna Aryal ◽  
Mohan Mahato ◽  
Jiban Shrestha
Keyword(s):  
Grain Yield ◽  
Block Design ◽  
Growth And Yield ◽  
Maize Production ◽  
Factors Affecting ◽  
Net Returns ◽  
Maize Varieties ◽  
Maize Variety ◽  
Four Levels ◽  
Hybrid Maize

Nitrogen (N) fertilizer is considered as one of the most important factors affecting growth and grain yield of hybrid maize. This study was conducted to determine the effects of different rates of nitrogen and varieties on growth and yield of hybrid maize in Lamahi Municipality, Dang, Nepal from June to October, 2019. Three levels of hybrid maize varieties (10V10, Rajkumar F1 and NMH-731) and four levels of nitrogen (160, 180, 200 and 220 kg N ha-1) were evaluated using two factorial randomized complete block design with three replications. The results showed that grain yield and yield attributing traits of hybrid maize varieties increased with the increasing level of nitrogen from 160 to 220 kg ha-1. The application of nitrogen @ 220 kg N ha-1 produced the highest grain yield (10.07 t ha-1), cob length (16.33 cm), no of rows per cob (14.97), no of grains per row (33.37), cob diameter (4.54), thousand grain weight (276.77 g), stover yield (12.91 t ha-1), biological yield (23.00 t ha-1), harvest index (43.80), gross return (NRs. 208940 ha-1), net return (NRs.104488 ha-1) and B:C ratio (2.001). The hybrid maize variety 10V10 produced the highest grain yield (9.35 t ha-1), net returns (NRs. 91740.66 ha-1) and B:C ratio (1.91) accompanied by the highest cob length (16.25 cm), and as number of grains per row (32.35) as compared to other varieties. This study suggested that maize production can be maximized by cultivating hybrid maize variety 10V10 with the use of 220 kg N ha-1 in inner Terai region of Nepal.

scholarly journals Impact of Tillage and Vegetative Mulch on Growth and Yield of Maize under Ferralitic Soil Conditions in Southern Benin

2020 ◽  
pp. 26-36
Author(s):  
Mahugnon Socrate Agonvinon ◽  
Alladassi Felix Kouelo ◽  
Tobi Moriaque Akplo ◽  
Julien Avakoudjo ◽  
Pascal Houngnandan ◽  
...  
Keyword(s):  
Growth Rate ◽  
Grain Yield ◽  
Harvest Index ◽  
Growth Parameters ◽  
Block Design ◽  
Growth And Yield ◽  
Soil Conditions ◽  
No Tillage ◽  
Two Factors ◽  
Southern Benin

Aims: Crop production is exposed to climate change phenomenon resulting in change in rainfall amount and long drought spells. Good conservation practices are important in yield improvement. This study aims to assess the effect of tillage and vegetative mulch on maize growth rate, yield and harvest index in ferralitic soil of southern Benin. Study Design: The complete randomized block design (CRBD) with 4 repetitions was implemented. Place and Duration of Study: The experimental site is located at Allada, in southern Benin, and conducted between May 2017 and July 2017. Methodology: During this study, two factors were tested (Tillage and mulch) and 6 treatments have been obtained of combination of two factors level (No-tillage, tillage and 0%, 50%, 75% mulch). The growth parameters, yield parameters and harvest index were determined. Results: The results indicated that tillage and mulching significantly influenced the growth rate, leaf surface and leaf number of maize plants. Tillage increased to 54% the grain yield compared to no tillage whereas 50% and 75% mulch promoted the highest grain yield. Considering the combination of tillage and mulching, LM50 (Tillage + 50% mulch) and LM75 (Tillage + 75% mulch) treatments resulted in about 85% increase of grain yield compared to direct seeding without mulch. Conclusion: These results reflect the importance of soil cover in improving of maize productivity.

scholarly journals Integrating Soybean Residues With Nitrogen Fertilizer for Improved Maize Production in Eastern Uganda

2019 ◽  
Vol 11 (8) ◽  
pp. 206
Author(s):  
B. Sadina ◽  
A. Amoding ◽  
R. Amayo ◽  
M. Biruma
Keyword(s):  
Grain Yield ◽  
Block Design ◽  
Farming Systems ◽  
Crop Productivity ◽  
N Fertilizer ◽  
Maize Production ◽  
Ecological Zones ◽  
Maize Grain Yield ◽  
Maize Grain ◽  
Four Levels

Soybean has become one of the dominant crops in Ugandan farming systems; however the contribution of its residues to improve soil and crop productivity is less known. To investigate the role of soybean residues to enhance crop productivity, researcher-managed experiments were conducted for two seasons (2011B and 2012A) in Namayingo and Tororo districts, representing the L. Victoria crescent, and South-eastern L. Kyoga basin agro-ecological zones, respectively. Factorial treatments of three levels of soybean residues (0, 2 and 4 t ha-1) and four levels of N fertilizer (0, 30, 60 and 120 kg ha-1 N) in form of urea were applied in maize fields in a randomized complete block design so as to; determine the optimum nutrient combination for maize, and establish the added yield benefits, if any, of using soybean residues with N fertilizer in maize production. Site yields varied significantly (p < 0.001), with higher maize yields obtained in Namayingo compared to Tororo. Significantly (p < 0.05) higher maize grain yields were obtained with the highest nutrient input combinations of 2 t ha-1 residue and 60 kg ha-1 N (yield increment of 71.72% above the control) in Namayingo district and 4 t ha-1 residue combined with120 kg ha-1 N increased maize grain yield by 140.69% above the control in Tororo. The added maize grain yield benefits ranged from 2540 kg grain ha-1 to 3250 kg grain ha-1 in Namayingo and from 2000 kg grain ha-1 to 2310 kg grain ha-1 in Tororo. Combined use of soybean residue with N fertilizer has been found to have agronomic yield benefits to maize production.

scholarly journals Varietal performance of modern transplant Aman rice subjected to level of nitrogen application

2014 ◽  
Vol 12 (1) ◽  
pp. 55-60 ◽  
Author(s):  
MS Islam ◽  
SK Paul ◽  
MAR Sarkar
Keyword(s):  
Grain Yield ◽  
Block Design ◽  
Fertilizer Application ◽  
The Other ◽  
Growth And Yield ◽  
Nitrogen Application ◽  
Yield Attributes ◽  
Randomized Complete Block Design ◽  
Four Levels ◽  
Effect On Yield

An experiment was carried out at the Agronomy Field Laboratory, Bangladesh Agricultural University, Mymensingh during June to December 2012 with a view to finding out the effect of variety and nitrogen fertilizer application on the growth and yield of transplant Aman rice. The experiment comprised four varieties viz. BRRI dhan33, BRRI dhan34, BRRI dhan39 and BRRI dhan46, and four levels of nitrogen viz. control (no urea), prilled urea (50 kg N ha-1), one pellet (0.9g) of USG/4 hills of two adjacent rows (30 kg N ha-1) was applied at 10 DAT and two pellets of USG (0.9g each) one applied at 10 DAT and the other at 45 DAT/4 hills of two adjacent rows (60 kg N ha-1). The experiment was laid out in a randomized complete block design with three replications. Results of the experiment showed that variety and level of nitrogen application had significant effect on yield attributes and yield of transplant Aman rice. At maturity the tallest plant (122.60 cm) and the highest number total tillers hill-1 (12.72) were observed in two pellets of USG/4 hills providing 60 kg N ha-1. The highest number of tillers hill-1 (10.08) was obtained from BRRI dhan34 and the lowest one (9.88) from BRRI dhan33. The highest grain yield was obtained from BRRI dhan46 (4.56 t ha-1) and the lowest one (3.27 t ha-1) was obtained from BRRI dhan34. The interaction reveals that the highest grain yield (5.61 t ha-1) was obtained from the treatment combination of BRRI dhan46 with two pellets of USG (0.9g each) applied one at 10 DAT and the other at 45 DAT.DOI: http://dx.doi.org/10.3329/jbau.v12i1.21239 J. Bangladesh Agril. Univ. 12(1): 55-60, June 2014

scholarly journals Effects of row spacings and varieties on grain yield and economics of maize

2020 ◽  
Vol 3 (1) ◽  
pp. 209-218
Author(s):  
Saurabha Koirala ◽  
Akash Dhakal ◽  
Dhiraj Niraula ◽  
Sampurna Bartaula ◽  
Urbashi Panthi ◽  
...  
Keyword(s):  
Grain Yield ◽  
Plant Density ◽  
Block Design ◽  
Row Spacing ◽  
Plant Spacing ◽  
Thousand Grain Weight ◽  
Maize Production ◽  
Maize Varieties ◽  
Randomized Complete Block Design ◽  
Four Levels

Maize is the second most important crop of Nepal. The yield of the crop is low due to lack of appropriate plant density for the varieties. The field experiment was carried out to study the effect of different row spacings on different maize varieties at Deupur, Lamahi municipality of the dang district in province No. 5, Nepal during the rainy season from June to September, 2018. Four levels of spacings (boardcasting and three row spacings of 45, 60 and 75 cm) and two maize varieties (Rampur Composite and Arun-2) were evaluated using randomized complete block design with three replications. The highest grain yield was found in Rampur Composite and Arun-2 while they were planted with row spacing of 60 cm with plant to plant spacing of 25 cm. The highest grain yield, cob length, cob circumference, number of rows per cob, thousand grain weight  were reported when maize was planted in the  row spacing 60×25cm. Among the maize varieties, Rampur Composite produced the highest grain yield, cob length, cob circumference, number of rows per cob as compared to Arun-2. This study suggested that maize production can be maximized by cultivating maize varieties with row spacing of 60 cm with plant to plant spacing of 25 cm.

Evaluation of maize-soybean intercropping systems and fertilizer rates on maize grain yield using competitive indices

2020 ◽  
Vol 18 (1) ◽  
pp. 63-76
Author(s):  
F.O. Takim ◽  
J.O. Omeke ◽  
P. Tunku ◽  
J.A. Shebaya ◽  
G. Olaoye ◽  
...  
Keyword(s):  
Grain Yield ◽  
Crop Production ◽  
Production Efficiency ◽  
Cropping Systems ◽  
Block Design ◽  
Cost Ratio ◽  
Maize Crop ◽  
Maize Production ◽  
Guinea Savanna ◽  
Fertilizer Rates

Field trials were conducted in savanna ecologies of Nigeria during the 2015 and 2016 seasons using maize (PVA8) and soybean (TGX 1448-2E) intercropping systems with different fertilizer rates to evaluate the yield of maize and assess the best intercropping system for resource management. Single plant stands and two plants/stand and 2 arrangements of rows (one row on a ridge and two rows on a ridge) were used to impose maize plant densities evaluated in strip inter-crop with soybean. The trial was factorial, laid out in a randomized complete block design and replicated three times. Thus, 8 maize-soybean strip cropping systems and application of 3 NPK rates were evaluated at Saki-Oyo, Ilorin, and Nasarawa (southern Guinea savanna), Kaduna in the northern Guinea savanna, Funtua (Katsina) and Gusau (Zamfara) located within Sudan savanna ecologies of Nigeria. Data on yields and yield components were collected. The intercropping systems were assessed using existing intercropping indices such as Land Equivalent Ratio (LER), Relative Crowding Coefficient (K), Aggressivity (A), Competitive Ratio (CR), Actual Yield Loss (AYL), Intercropping Advantage (IA) and Monetary Advantage Index (MAI). The result showed that Nasarawa and Kaduna were most ideal locations for maize production in the Nigeria savannas. The highest grain yield of 4.04 tons/ha maize and 1.36 tons/ha soybean were obtained from seeding 1 plant/stand in 2-rows per ridge x 4 ridges of maize alternated with 2 rows of soybean with the application of NPK at 100:50:50. The LER was 1.11, AYL (1.10) and MAI (208) gave a profit of ₦312,102.00 (US$990.80) ha-1 with a benefit-cost ratio of 2.38 and production efficiency of 29.56%. The study concluded that, seeding 80% maize and 20% soybean per ha will lead to sustainable maize crop production with limited use of fertilizer. It can be adopted by the farmers in Nigeria savannas as a relatively profitable intercropping system. Keywords: Maize production, Ideal location, Fertilizer rate, Competitive indices, Savanna ecologies, Nigeria

scholarly journals Site-Specific Nutrient Management for Rainfed Maize in Western Mid-Hills of Nepal

2015 ◽  
Vol 3 (2) ◽  
pp. 227-231 ◽  
Author(s):  
Prakash Ghimire ◽  
Khem Raj Dahal ◽  
Santosh Marahatta ◽  
Krishna Devkota ◽  
Buddhi Raj Ghimire
Keyword(s):  
Nutrient Management ◽  
Block Design ◽  
Maize Production ◽  
Site Specific ◽  
Fertilizer Recommendation ◽  
Application Rates ◽  
Development Committee ◽  
Fertilization Practice ◽  
Village Development Committee ◽  
On Farm

 On-farm experiment was conducted in eight farmers’ field, of Khasyoli village development committee (952 to 1415 masl), Nepal, from April to September, 2011 to address the major constraint (nutrient management) to maize production through site-specific nutrient management (SSNM) as this approach is popular among scientists. The experiment comprised three nutrient omission plots (0N, 0P, and 0K), an ample NPK plot, and a farmers’ fertilization practice (FFP) plot, arranged in randomized complete block design. Farmers planted open pollinated variety (Manakamana-3) and managed in their way. Field-specific NPK application rates were calculated by considering nutrient demand, indigenous NPK supply and recovery efficiency of fertilizers. Grain yield in FFP (2.32 Mg/ha) and 0N (1.79 Mg/ha) plots differed significantly from each other and rest of the treatments, but was statistically similar among 0P (3.18 Mg/ha), 0K (3.40 Mg/ha) and ample NPK (3.38 Mg/ha) plots. Post-harvest grain and stover analysis revealed that indigenous NPK supply (20-71 kg N, 19-68 kg P2O5 and 51-164 kg K2O/ha) of soil vary among the farmers’ field. Moreover, soil was poor in indigenous N supply (42 kg/ha), but rich in indigenous P2O5 (35 kg/ha) and K2O (90 kg/ha) supply, on an average. As per the principles of SSNM, the initial fertilizer recommendation made can vary from 40-222 kg N, 0- 93 kg P2O5, and 0-50 kg K2O/ha. On an average, farmers may apply no or lower dose of P2O5 (18 kg/ha) and K2O (3 kg/ha) but need to significantly increase dose of N (143 kg/ha) fertilizer for enhancing soil and maize productivity.Int J Appl Sci Biotechnol, Vol 3(2): 227-231 DOI: http://dx.doi.org/10.3126/ijasbt.v3i2.12538   

scholarly journals SPRAY APPLICATIONS TO TOMATO PLANTS IN GREENHOUSES. PART 2: EFFECT OF SPRAY LANCE TYPE

2009 ◽  
Vol 40 (3) ◽  
pp. 49 ◽  
Author(s):  
Emanuele Cerruto ◽  
Giuseppe Emma ◽  
Giuseppe Manetto
Keyword(s):  
Block Design ◽  
The Body ◽  
Lower Limbs ◽  
Internal Layer ◽  
Protective Equipment ◽  
Body Parts ◽  
Tomato Plants ◽  
Application Rates ◽  
Two Factors ◽  
The Mean

The present paper reports the results of some spray application trials carried out in a greenhouse with full developed tomato plants to assess foliar deposition, ground losses, and dermal operator exposure when using handheld high pressure spray lances and when walking backwards during treatments. Two spray lance types (conventional with one nozzle and Yamaho C-6 with two steel nozzles, each with two orifices) and two working pressures (10 and 20 bar) were taken into consideration. An experimental design with two factors (spray lance and pressure) was adopted, arranged according to a randomised block design with three replicates. Volume application rates ranged from 775 up to 1252 L/ha, but all data were normalised to 1000 L/ha. The results showed no statistically significant differences in the mean foliar deposition between the two spray lances and the two working pressures. However, the higher pressure improved significantly the deposit into the internal layer of the canopy (+57%), whereas the Yamaho C-6 spray lance produced a higher deposit on the external layer at any pressure. The greatest differences between external and internal layer were mainly concentrated in the middle and high parts of the canopy, where there were 55 007_Cerruto(557)_49 18-11-2009 11:59 Pagina 55 the highest values of LAI and number of foliar layers. The fraction of the applied volume rate on the ground was on average 25 percent and it was affected only by the pressure value: it increased from 21.7 to 28.7 percent when the pressure increased from 10 to 20 bar, due mainly to the contribution of the conventional spray lance under the sprayed twin-rows. Finally, neither pressure nor spray lance type affected significantly the dermal operator exposure. Upper limbs accounted for 51 percent of the total exposure, while trunk and lower limbs accounted for 24 percent each. The body parts more exposed were the left arm and the hands, but also relatively high was the deposit on the respirator, so operators should ever wear appropriate personal protective equipment.

Sign in / Sign up

Export Citation Format

Share Document