scholarly journals Behavior of Hybrid CFRP Laminated Thin-Walled Beams: Experimental, Numerical, and Analytical Evaluations

2021 ◽  
Vol 2021 ◽  
pp. 1-12
Author(s):  
A. M. Yosri ◽  
Gouda M. Ghanem ◽  
Mohamed A. E. Salama ◽  
Majed Alzara ◽  
Mohamed A. Farouk ◽  
...  
Keyword(s):  
Experimental Results ◽  
Fiber Reinforced Polymer ◽  
Core Material ◽  
Steel Beams ◽  
Specific Strength ◽  
Reinforced Polymer ◽  
Load Carrying ◽  
Hybrid Beams ◽  
Thin Walled ◽  
Strength And Stiffness

The aim of this paper is to assess the structural behavior of hybrid thin-walled beams which were fabricated using laminated carbon fiber reinforced polymer (CFRP). Seven hybrid (CFRP) I-beams were fabricated, instrumented, then have been tested under monotonic four-point loading in order to evaluate their behavior up to failure. In constructing the I-beam specimens which were evaluated in this study, plywood core was implemented on both the web and flanges. Several important parameters were conducted in this study considering changing both of the ply orientations and stacking sequences of laminated fibers, also changing the shear span-to-depth ratio (a/d) of the specimens. The experimental results showed that stacking sequence is the most significant parameter that influences both flexural strength and stiffness of the hybrid beams. Also, the experimental results promoted the effectiveness of the core material for enhancing the flexure (bending) stiffness of beams. Then, these results were compared with a previous simulated study which used the finite element modeling to model the beams. Also, in order to evaluate the efficiency of the CRFP beams, the results were compared to similar steel beams having the same dimensions of the CFRP beams. As compared to steel beams, the load carrying capacity of the laminated beams is being high compared with steel beams when taking into consideration their specific strength ratio.

Square Short Wood Columns Strengthened with FRP Sheets under Compressive Load

2012 ◽  
Vol 256-259 ◽  
pp. 1008-1011
Author(s):  
Yan Mei Zhu ◽  
Shu Cheng Yuan ◽  
Min Hou ◽  
Qing Yuan Wang
Keyword(s):  
Ultimate Strength ◽  
Failure Modes ◽  
Compressive Loading ◽  
Compressive Load ◽  
Fiber Reinforced Polymer ◽  
Test Results ◽  
Reinforced Polymer ◽  
Load Carrying ◽  
Strength And Stiffness ◽  
Wood Columns

This paper presents the experimental results of the wood columns externally strengthened with fiber reinforced polymer (FRP) subjected to axial compressive loading. In total, 14 square short wood columns were made, which were reinforced by FRP in two reinforcing arrangements. The main parameters studied in the test were (1) the strengthening materials, i.e. carbon FRP (CFRP), basalt FRP (BFRP) and aramid FRP (AFRP); (2) the reinforcing arrangements, i.e. the full wrapping of FRP and the partial reinforcing arrangement; (3) the layers of FRP sheets applied, i.e. one, two and three. The ultimate strength, load-axial displacements curves, load-strain relationships, and the failure modes of all the columns were presented. The test results show that both types of the reinforcing arrangements could increase the ultimate strength and stiffness of the columns tested greatly. The columns strengthened with two layers of FRP sheets gave higher load carrying capacities when compared to the columns strengthened with one or three layers of FRP sheets. The result confirms that the more layers of FRP sheets, the higher of load carrying capacity; however, the adverse results were shown when three layers of FRP sheets applied. Finally, the result also showed that the full wrapping reinforcing arrangement is more effective than the partial one in enhancing the stiffness.

EXPERIMENTAL INVESTIGATION OF CFRP STRENGTHENED I-SHAPED COLD FORMED STEEL BEAMS

2017 ◽  
Vol 79 (5) ◽  
Author(s):  
Nahushananda Chakravarthy ◽  
Sivakumar Naganathan ◽  
Jonathan Tan Hsien Aun ◽  
Sreedhar Kalavagunta ◽  
Kamal Nasharuddin Mustapha ◽  
...  
Keyword(s):  
Carrying Capacity ◽  
Experimental Results ◽  
Steel Beams ◽  
Load Carrying Capacity ◽  
Load Carrying ◽  
Length Width ◽  
Cold Formed Steel ◽  
Formed Channel ◽  
Hot Rolled ◽  
Hot Rolled Steel

Cold formed steel differ from hot rolled steel by its lesser thickness and weight. The cold formed steel applicable in roof purlin, pipe racks and wall panels etc. Due its lesser wall thickness the cold formed steel member subjected to buckling. The enhancement of load carrying capacity of the cold formed steel member can be achieved by external strengthening of CFRP. In this study cold formed channel members connected back to back to form I shaped cross section using screws. These built up beam members were 300mm, 400mm and 500mm in length with 100mm screw spacing and edge distance of 50mm were chosen for testing. CFRP fabric cut according to length, width of built up beams and wrapped outer surface of beam using epoxy resin. Experiments were carried out in two sets firstly plain built up beams and secondly CFRP wrapped beams. The test results shows that increased load carrying capacity and reduction in deflection due to CFRP strengthening. Experimental results were compared with AISI standards which are in good agreement. Experimental results shows that CFRP strengthening is economic and reliable.

Experimental study on the axial compression performance of GFRP-reinforced concrete square columns

2018 ◽  
Vol 22 (7) ◽  
pp. 1554-1565 ◽  
Author(s):  
Jianwei Tu ◽  
Kui Gao ◽  
Lang He ◽  
Xinping Li
Keyword(s):  
Carrying Capacity ◽  
Ultimate Load ◽  
Fiber Reinforced Polymer ◽  
Load Carrying Capacity ◽  
Longitudinal Reinforcement ◽  
Rc Columns ◽  
Compression Performance ◽  
Reinforced Polymer ◽  
Load Carrying ◽  
Ultimate Load Carrying Capacity

At present, extensive studies have been conducted relative to the topic of fiber-reinforced polymer(FRP)- reinforced concrete (RC) flexural members, and many design methods have also been introduced. There have, however, been few studies conducted on the topic of FRP-RC compression members. In light of this, eight glass-fiber-reinforced polymer (GFRP)-RC square columns (200×200×600 mm) were tested in order to investigate their axial compression performance. These columns were reinforced with GFRP longitudinal reinforcement and confined GFRP stirrup. These experiments investigated the effects of the longitudinal reinforcement ratio, stirrup configuration (spirals versus hoops) and spacing on the load-carrying capacity and failure modes of GFRP-RC rectangular columns. The test results indicate that the load-carrying capacity of longitudinal GFRP bars accounted for 3%-7% of the ultimate load-carrying capacity of the columns. The ultimate load-carrying capacity of RC columns confined with GFRP spirals increased by 0.8%-1.6% with higher ductility, compared to GFRP hoops. Reducing the stirrup spacing may prevent the buckling failure of the longitudinal bars and increase the ductility and load-carrying capacity of the GFRP-RC columns. It has been found that setting the GFRP compressive strength to 35% of the GFRP maximum tensile strength yields a reasonable estimate of ultimate load-carrying capacity of GFRP-RC columns.

Structural Performance of Fiber-Reinforced Polymer Honeycomb Sandwich Panels: Evaluation of Size Effect and Wrap Strengthening

2003 ◽  
Vol 1845 (1) ◽  
pp. 191-199 ◽  
Author(s):  
Ondrej Kalny ◽  
Robert J. Peterman ◽  
Guillermo Ramirez ◽  
C. S. Cai ◽  
Dave Meggers
Keyword(s):  
Carrying Capacity ◽  
Ultimate Load ◽  
Sandwich Panels ◽  
Fiber Reinforced Polymer ◽  
Load Carrying Capacity ◽  
Flexural Capacity ◽  
Reinforced Polymer ◽  
Load Carrying ◽  
Honeycomb Sandwich ◽  
Ultimate Load Carrying Capacity

Stiffness and ultimate load-carrying capacities of glass fiber-reinforced polymer honeycomb sandwich panels used in bridge applications were evaluated. Eleven full-scale panels with cross-section depths ranging from 6 to 31.5 in. (152 to 800 mm) have been tested to date. The effect of width-to-depth ratio on unit stiffness was found to be insignificant for panels with a width-to-depth ratio between 1 and 5. The effect of this ratio on the ultimate flexural capacity is uncertain because of the erratic nature of core-face bond failures. A simple analytical formula for bending and shear stiffness, based on material properties and geometry of transformed sections, was found to predict service-load deflections within 15% accuracy. Although some factors influencing the ultimate load-carrying capacity were clearly identified in this study, a reliable analytical prediction of the ultimate flexural capacity was not attained. This is because failures occur in the bond material between the outer faces and core, and there are significant variations in bond properties at this point due to the wet lay-up process, even for theoretically identical specimens. The use of external wrap layers may be used to shift the ultimate point of failure from the bond (resin) material to the glass fibers. Wrap serves to strengthen the relatively weak core–face interface and is believed to bring more consistency in determining the ultimate load-carrying capacity.

scholarly journals Flexural strengthening of Reinforced Concrete (RC) Beams Retrofitted with Corrugated Glass Fiber Reinforced Polymer (GFRP) Laminates

2015 ◽  
Vol 2 (1) ◽  
Author(s):  
N. Aravind ◽  
Amiya K. Samanta ◽  
Dilip Kr. Singha Roy ◽  
Joseph V. Thanikal
Keyword(s):  
Reinforced Concrete ◽  
Carrying Capacity ◽  
Fiber Reinforced Polymer ◽  
Load Carrying Capacity ◽  
Rc Beams ◽  
Glass Fiber Reinforced Polymer ◽  
Flexural Strengthening ◽  
Reinforced Polymer ◽  
Glass Fiber Reinforced ◽  
Load Carrying

AbstractStrengthening the structural members of old buildings using advanced materials is a contemporary research in the field of repairs and rehabilitation. Many researchers used plain Glass Fiber Reinforced Polymer (GFRP) sheets for strengthening Reinforced Concrete (RC) beams. In this research work, rectangular corrugated GFRP laminates were used for strengthening RC beams to achieve higher flexural strength and load carrying capacity. Type and dimensions of corrugated profile were selected based on preliminary study using ANSYS software. A total of twenty one beams were tested to study the load carrying capacity of control specimens and beams strengthened with plain sheets and corrugated laminates using epoxy resin. This paper presents the experimental and theoretical study on flexural strengthening of Reinforced Concrete (RC) beams using corrugated GFRP laminates and the results are compared. Mathematical models were developed based on the experimental data and then the models were validated.

Influence of graphene fillers on vibration characteristics of tapered hybrid GFRP composite beams under elevated temperature condition: Numerical and experimental study

2021 ◽  
pp. 107754632110457
Author(s):  
Akshay Pawgi ◽  
Akshay Bharadwaj Krishna ◽  
Shikhar Gupta ◽  
Paul Praveen A ◽  
Ananda Babu Arumugam ◽  
...  
Keyword(s):  
Glass Fiber ◽  
Weight Fraction ◽  
Composite Beams ◽  
Fiber Reinforced Polymer ◽  
Fiber Reinforced ◽  
Glass Fiber Reinforced Polymer ◽  
Polymer Hybrid ◽  
Reinforced Polymer ◽  
Glass Fiber Reinforced ◽  
Hybrid Beams

In this study, numerically and experimentally the dynamic characteristics of graphene-reinforced glass fiber–reinforced polymer hybrid uniform and thickness tapered laminated composite beams were investigated. First, the graphene-epoxy nanocomposite solution without and with 0.25, 0.50, and 0.75 wt.% of graphene reinforcement is prepared by the heat shearing technique and then used for the fabrication of glass fiber–reinforced polymer hybrid uniform and thickness tapered composite beams using the hand lay-up method. The elastic properties of the hybrid beams were evaluated using the impulse excitation of vibration technique (ASTM E1876-15) under elevated temperature. Further, the numerical and experimental modal analysis of the hybrid beams with uniform and tapered configurations were conducted with variation in wt.% of graphene particles under fixed-fixed and fixed–free end supports. The results reveal that the natural frequencies of the glass fiber–reinforced polymer hybrid uniform and tapered configurations with 0.25 wt.% of graphene are greater than those of the glass fiber–reinforced polymer beams without graphene reinforcement and observed lesser for 0.5 and 0.75 wt.% of graphene under fixed-fixed and fixed-free end supports, respectively, due to unavoidable agglomeration effects. Furthermore, the parametric study was performed with the influence of weight fraction of graphene and temperature on the transverse response of the tapered composite beam. Hence, it can be concluded that the use of graphene filler in the glass fiber–reinforced polymer composites in the tapered composite beams improves the bending natural frequencies significantly when the weight fraction of the graphene is used lesser as agglomeration is unavoidable in practical condition. Therefore, the comprehensive numerical and experimental work presented in this study will be useful to the designers while using graphene fillers to improve the bending characteristics of the tapered composite beams.

scholarly journals Simplified Material Solution for Orthotropic Symmetrical GFRP Laminates for Structural Facades

2019 ◽  
Vol 2019 ◽  
pp. 1-15
Author(s):  
Yuchao Zhao ◽  
Xu Jiang ◽  
Qilin Zhang ◽  
Xuhong Qiang
Keyword(s):  
Design Theory ◽  
High Strength ◽  
Fiber Reinforced Polymer ◽  
Free Form ◽  
Reinforced Polymer ◽  
Glass Fiber Reinforced ◽  
Complex Design ◽  
Low Weight ◽  
Strength And Stiffness ◽  
Material Solution

GFRP (glass-fiber-reinforced polymer), as a composite material, possesses many favorable properties including high strength and low weight and is amenable to unique processing methods; therefore, it is a potential free-form surface material. However, the complex design theory owing to anisotropy limits its application. Thus, a simplified material solution becomes significant. In this study, the strength and stiffness of orthotropic symmetrical GFRP laminates are derived theoretically, and a simplified material solution is proposed to simplify the anisotropy as isotropy. Then, using the numerical simulation of an actual orthotropic symmetrical GFRP laminate free-form facade structure, the effectiveness of the simplified material solution is analyzed and evaluated. This solution can provide guidance for similar GFRP facades and further promote the application of GFRP in engineering.

scholarly journals Shear deformable super-convergent finite element for steel beams strengthened with glass-fiber reinforced polymer (GFRP) plate

2019 ◽  
Vol 46 (4) ◽  
pp. 338-351
Author(s):  
Phe Van Pham ◽  
Magdi Mohareb ◽  
Amir Fam
Keyword(s):  
Finite Element ◽  
Glass Fiber ◽  
Shear Deformation ◽  
Fiber Reinforced Polymer ◽  
Steel Beams ◽  
Fiber Reinforced ◽  
Glass Fiber Reinforced Polymer ◽  
Reinforced Polymer ◽  
Glass Fiber Reinforced ◽  
Partial Interaction

The present study investigates the flexural behaviour of steel beams strengthened by adhesively bonding a glass-fiber reinforced polymer (GFRP) plate to one of the flanges. The model captures shear deformation effects and partial interaction between the steel and GFRP owing to the relative flexibility of the adhesive. A general closed form solution is first developed for the governing coupled system of differential equations. The solution is then used to formulate mechanics-based shape functions and develop a finite element with superior convergence characteristics. The model is used to investigate the response of multi-span continuous beams, determine the strength gained by GFRP strengthening, and quantify shear deformation effects on the response of strengthened beams. A technique capturing partial interaction effects is devised to characterize the flexural strength of Class 3 strengthened beams. A classification limit for strengthened Class 3 sections is also proposed within the framework of the Canadian Standard CAN-CSA S16 (2014).

scholarly journals Influence of ties on the behavior of short reinforced concrete columns strengthened by external CFRP

2018 ◽  
Vol 162 ◽  
pp. 04005
Author(s):  
Kaiss Sarsam ◽  
Raid Khalel ◽  
Mohammed Hadi
Keyword(s):  
Carrying Capacity ◽  
Concrete Columns ◽  
Fiber Reinforced Polymer ◽  
Carbon Fiber Reinforced Polymer ◽  
Load Carrying Capacity ◽  
Cfrp Sheets ◽  
Reinforced Polymer ◽  
Load Carrying ◽  
The Difference ◽  
Normal Strength

An experimental study was carried out to investigate the behavior of normal strength reinforce concret (RC) circular short column strengthned with “carbon fiber reinforced polymer (CFRP) sheets”. Three series comprising totally of (15) specimens loaded until failure under concentric compresion load. Strengthening was varied by changing the number of CFRP strips, spacing and wrapping methods. The findings of this research can be summarized as follows: for the columns without CFRP, the influence of the tie spacing was significant: compared with 130 mm tie spacing, dropping the spacing to 100 mm and 70 mm increased the load carrying capacity by 18% and 26%, respectively. The columns with less internal confinement (lesser amount of ties) were strengthened more significantly by the CFRP than the ones with greater amount of internal ties. As an example of the varying effectiveness of the fully wrapped CFRP, the column with ties at 130 mm was strengthened by 90% with the CFRP. In contrast, the ones with 70 mm spaced ties only increased in strength with CFRP by 66%. Compared with the control specimen (no CFRP), the same amount of CFRP when used as hoop strips led to more strengthening than using CFRP as a spiral strip- the former led to nearly 9% more strengthening than the latter in the case of 130 mm spaced internal steel ties. In the case of 100 mm internal steel ties, the difference (between the hoops & spiral CFRP strengthening) is close to 4%. In contrast, there is no difference between the two methods of strengthening in the heavily tied columns (70 mm tied spacing).

Sign in / Sign up

Export Citation Format

Share Document