scholarly journals The Accumulation Characteristics of the Paleozoic Reservoir in the Central-Southern Ordos Basin Recorded by Organic Inclusions

Geofluids ◽  
2021 ◽  
Vol 2021 ◽  
pp. 1-17
Author(s):  
Ruijing Zhu ◽  
Rongxi Li ◽  
Xiaoli Wu ◽  
Xiaoli Qin ◽  
Bangsheng Zhao ◽  
...  
Keyword(s):  
Natural Gas ◽  
Fluid Inclusion ◽  
Fluid Inclusions ◽  
Early Phase ◽  
Ordos Basin ◽  
Carbonate Reservoir ◽  
Source Rocks ◽  
Late Triassic ◽  
Hydrocarbon Generation ◽  
Accumulation Characteristics

The Permian tight clastic reservoir and Ordovician carbonate reservoir were developed in the central-southern Ordos Basin. This study investigated the fluid inclusion petrography, diagenetic fluid characteristics, formation process of natural gas reservoir, source rock characteristics, and reservoir accumulation characteristics of these Paleozoic strata by petrographic observations, scanning electron microscope imaging, fluid inclusion homogenization temperature, salinity, laser Raman spectrum, and gas chromatograph analyses. The results have suggested two phases of fluid inclusions in both the Permian sandstone and the Ordovician Majiagou Formation dolomite reservoirs, and the fluid inclusions recorded the history from the early thermal evolution of hydrocarbon generation to the formation, migration, and accumulation of natural gas. The early-phase inclusions show weak yellow fluorescence and recorded the early formation of liquid hydrocarbons, while the late-phase inclusions are nonfluorescent natural gas inclusions distributed in the late tectonic fractures and recorded the late accumulation of natural gas. The brine systems of the Permian and Ordovician fluid inclusions are, respectively, dominated by CaCl2-H2O and MgCl2-NaCl-H2O. The diagenetic fluids were in the ranges of medium-low temperature and moderate-low salinity. The natural gas hydrocarbon source rocks in the Ordos Basin include both the Permian coal-bearing rocks and the Ordovician carbonates. The process of the early-phase liquid hydrocarbon formation and migration into the reservoir corresponded to 220 Ma (Late Triassic). The late large-scale migration and accumulation of natural gas occurred at 100 Ma (early Late Cretaceous), which was close to the inclusion Rb/Sr isochron age of 89.18 Ma, indicating that the natural gas accumulation was related to the Yanshanian tectonic movement.

scholarly journals Natural gas migration and accumulation model and favorable exploration targets in Ordovician dolomite in Jingxi, Ordos Basin

2017 ◽  
Vol 36 (3) ◽  
pp. 373-387
Author(s):  
Jingdong Liu ◽  
Youlu Jiang ◽  
Xinshe Liu ◽  
Rongwei Zhu
Keyword(s):  
Natural Gas ◽  
Ordos Basin ◽  
Source Rocks ◽  
Late Triassic ◽  
Gas Migration ◽  
Formation Model ◽  
Long Distance ◽  
Gas Reservoir ◽  
Upper Paleozoic ◽  
Bottom To Top

The Ordovician dolomite reservoir in Ma55–Ma510 sub-members in Jingxi in Ordos Basin is a newly discovered field with multiple natural gas pools. The gas accumulation patterns of the reservoir are unclear. Considering the geological background, the genesis, migration, and accumulation of natural gas in Jingxi were studied systematically, and favorable exploration targets were predicted. Natural gas in Ma55–Ma510 sub-members is a mixture of Upper Paleozoic and Ordovician products. The Upper Paleozoic coaliferous gas was mainly expulsed downward through the hydrocarbon-providing window where the coal-bearing source rocks made contact with the dolomite reservoirs. The gas then migrated from west to east and accumulated under the condition of lithology variation. The Ordovician petroliferous gas mainly migrated from bottom to top through fractures and mixed with the coaliferous gas in Ma55–Ma510 sub-members. The natural gas reservoir formation model was summarized as the migration of gas over a short distance and partial charging into the dolomite reservoirs from the Late Triassic to Middle Jurassic, and the migration of gas over a long distance and massive charging into the dolomite reservoirs during the Late Cretaceous. Ma55 and Ma56 sub-members are the focus of further exploration, and petroliferous gas in Ma57–Ma510 sub-members deserves attention. The dolomite reservoirs of the hydrocarbon-providing windows and the east of these locations are the favorable exploration targets.

scholarly journals Natural Gas Accumulation Characteristics in the Linxing Area, Ordos Basin, NW China: Revealed from the Integrated Study of Fluid Inclusions and Basin Modeling

Geofluids ◽  
2020 ◽  
Vol 2020 ◽  
pp. 1-28
Author(s):  
Yong Shu ◽  
Shuxun Sang ◽  
Yuxiang Lin ◽  
Huiming Zheng
Keyword(s):  
Natural Gas ◽  
Fluid Inclusions ◽  
Thermal Evolution ◽  
Ordos Basin ◽  
Petrographic Analysis ◽  
Basin Modeling ◽  
Gas Accumulation ◽  
Upper Paleozoic ◽  
Gradual Process ◽  
Accumulation Characteristics

The Linxing area is located in the north of the eastern margin of the Ordos Basin, which has great resource potential for tight gas. In this paper, fluid inclusion analysis and basin modeling are the main means to clarify the gas accumulation mechanism of the Upper Paleozoic in the Linxing area. Petrographic analysis shows that fluid inclusions can be classified into 5 types: aqueous inclusions, hydrocarbon-bearing aqueous inclusions, hydrocarbon inclusions, crystal-bearing aqueous inclusions, and aqueous-carbonic inclusions. According to the statistical analysis of homogenization temperature and salinity of fluid inclusions, combined with the burial-thermal evolution, the study area was divided into 3 areas: the inner-magma baking area, the middle-anomal thermal area, and the outer-normal thermal area. The gas accumulation characteristics are differences among the 3 areas, the closer to Zijinshan magmatic pluton, the earlier gas accumulation period; and the vertical gas accumulation in the inner-magma baking area and the middle-anomal thermal area was not a slow and gradual process from bottom to top. The period from the Middle Jurassic to the Early Cretaceous is the key period for rapid pressure accumulation in the Upper Paleozoic reservoirs, which is consistent with the period of natural gas accumulation. The area near the Zijinshan magmatic pluton was the high fluid potential area during the gas accumulation period, which indicates that natural gas and other fluids migrated from Zijinshan magmatic pluton to the surrounding area. It is concluded that in the Linxing area, the Zijinshan magmatic pluton had a significant impact on natural gas accumulation, and the natural gas accumulation model under the control of magmatic thermal-tectonic effect was proposed.

scholarly journals The Evolution of Diagenetic Fluids and Accumulation Characteristics of Tight Sandstone Reservoir in Upper Paleozoic, Southwestern Ordos Basin

Geofluids ◽  
2021 ◽  
Vol 2021 ◽  
pp. 1-20
Author(s):  
Ruijing Zhu ◽  
Rongxi Li ◽  
Xiaoli Wu ◽  
Xiaoli Qin ◽  
Bangsheng Zhao ◽  
...  
Keyword(s):  
Natural Gas ◽  
Clay Minerals ◽  
Ordos Basin ◽  
Source Rocks ◽  
Fluid Inclusion Study ◽  
Hydrocarbon Accumulation ◽  
Tight Sandstone ◽  
Upper Paleozoic ◽  
Two Stages ◽  
Accumulation Characteristics

The Upper Paleozoic in the southwestern Ordos Basin has significant potential for natural gas exploration. This study investigated the diagenetic fluid evolution and hydrocarbon accumulation characteristics of He 8 section from Permian Lower Shihezi formation and Shan 1 section from Shanxi formation tight sandstone reservoirs by petrographic observation, scanning electron microscope imaging, fluid inclusion study, and laser Raman spectrum analysis. The results show that He 8 section and Shan 1 section reservoirs are mainly composed of quartz sandstone, subordinate arkose quartz sandstone, and lithic quartz sandstone, with minor lithic sandstone and lithic arkose sandstone. The major pores are intergranular dissolved pores. The main diagenetic minerals include quartz overgrowth, siliceous cement, carbonate cement, illite, montmorillonite, and mixed-layer clay minerals. The overall diagenetic features show strong compaction, multistage siliceous and calcareous cements, and abundant clay minerals, strong dissolution, and well-developed fractures. Two stages of fluid inclusions developed in the He 8 and Shan 1 sections recorded the migration and accumulation of the early-stage and late-stage natural gas, respectively. The reservoir in the study area experienced early and late diagenetic stages, and its formation was simultaneous with or after its densification. The diagenetic environment changed from alkaline to acidic and again into alkaline. There are two stages of fluid activities in the study area, namely, the early diagenetic stage corresponding to hydrocarbon generation and migration and the late diagenetic stage corresponding to hydrocarbon accumulation. This study suggests that Upper Paleozoic natural gas migrated into the reservoir in Weibei Uplift, Yishan Slope, and Tianhuan Depression tectonic units during 220-197 Ma, and the large-scale migration and accumulation occurred in these tectonic units at different times. No natural gas was generated in the west margin of the basin because the temperatures of the hydrocarbon source rocks in the Upper Paleozoic were below the gas window.

scholarly journals Fluid inclusions in buried quartz of the Yanchang sandstone in the Jiyuan area, Ordos Basin, China: Implications for basin evolution and petroleum accumulation

2020 ◽  
pp. 014459872097451
Author(s):  
Wenqi Jiang ◽  
Yunlong Zhang ◽  
Li Jiang
Keyword(s):  
Fluid Inclusions ◽  
Ordos Basin ◽  
Homogenization Temperature ◽  
Burial Depth ◽  
Hydrocarbon Generation ◽  
Rock Interaction ◽  
Yanchang Formation ◽  
Reflection Data ◽  
And Migration ◽  
Vitrinite Reflection

A fluid inclusion petrographic and microthermometric study was performed on the sandstones gathered from the Yanchang Formation, Jiyuan area of the Ordos Basin. Four types of fluid inclusions in quartz can be recognized based on the location they entrapped. The petrographic characteristics indicate that fluid inclusions in quartz overgrowth and quartz fissuring-I were trapped earlier than that in quartz fissuring-IIa and fissuring-IIb. The homogenization temperature values of the earlier fluid inclusions aggregate around 80 to 90°C; exclusively, it is slightly higher in Chang 6 member, which approaches 95°C. The later fluid inclusions demonstrate high homogenization temperatures, which range from 100 to 115°C, and the temperatures are slightly higher in Chang 9 member. The calculated salinities show differences between each member, including their regression characteristics with burial depth. Combining with the vitrinite reflection data, the sequence and parameters of fluid inclusions indicate that the thermal history of the Yanchang formation mostly relied on burial. Salinity changes were associated with fluid-rock interaction or fluid interruption. Hydrocarbon contained fluid inclusions imply that hydrocarbon generation and migration occurred in the Early Cretaceous. The occurrence of late fluid inclusions implied that quartz cement is a reservoir porosity-loose factor.

scholarly journals Light hydrocarbon geochemical characteristics and their application in Upper Paleozoic, Shenmu gas field, Ordos Basin

2016 ◽  
Vol 35 (1) ◽  
pp. 103-121 ◽  
Author(s):  
Wenxue Han ◽  
Shizhen Tao ◽  
Guoyi Hu ◽  
Weijiao Ma ◽  
Dan Liu ◽  
...  
Keyword(s):  
Natural Gas ◽  
Ordos Basin ◽  
Light Hydrocarbon ◽  
Source Rocks ◽  
Higher Plant ◽  
Gas Field ◽  
Gas Source ◽  
Upper Paleozoic ◽  
Methyl Cyclohexane ◽  
Normal Stage

Light hydrocarbon has abundant geochemical information, but there are few studies on it in Shenmu gas field. Taking Upper Paleozoic in Shenmu gas field as an example, authors use gas chromatography technology to study light hydrocarbon systematically. The results show that (1) The Shenmu gas field is mainly coal-derived gas, which is mixed by partial oil-derived gas due to the experiment data. (2) Based on K1, K2 parameter and Halpern star chart, the Upper Paleozoic gas in Shenmu gas field belongs to the same petroleum system and the depositional environment of natural gas source rocks should be homologous. (3) The source rocks are mainly from terrestrial higher plant origins and belong to swamp facies humic due to methyl cyclohexane index and Mango parameter intersection chart, which excluded the possibility of the Upper Paleozoic limestone as source rocks. (4) The isoheptane ranges from 1.45 to 2.69 with an average of 2.32, and n-heptane ranges from 9.48 to 17.68% with an average of 11.71%, which is below 20%. The maturity of Upper Paleozoic gas in Shenmu gas field is low-normal stage, which is consistent with Ro data. (5) The Upper Paleozoic natural gas in the Shenmu gas field did not experience prolonged migration or secondary changes, thus can be analyzed by light hydrocarbon index precisely.

scholarly journals Fluid geochemistry of the Jurassic Ahe Formation and implications for reservoir formation in the Dibei area, Tarim Basin, northwest China

2018 ◽  
Vol 36 (4) ◽  
pp. 801-819 ◽  
Author(s):  
Shuangfeng Zhao ◽  
Wen Chen ◽  
Zhenhong Wang ◽  
Ting Li ◽  
Hongxing Wei ◽  
...  
Keyword(s):  
Natural Gas ◽  
Tarim Basin ◽  
Oil And Gas ◽  
Northwest China ◽  
Source Rocks ◽  
Coal Measure ◽  
Hydrocarbon Generation ◽  
Gas Reservoirs ◽  
Isotopic Analyses ◽  
Jurassic Coal

The condensate gas reservoirs of the Jurassic Ahe Formation in the Dibei area of the Tarim Basin, northwest China are typical tight sandstone gas reservoirs and contain abundant resources. However, the hydrocarbon sources and reservoir accumulation mechanism remain debated. Here the distribution and geochemistry of fluids in the Ahe gas reservoirs are used to investigate the formation of the hydrocarbon reservoirs, including the history of hydrocarbon generation, trap development, and reservoir evolution. Carbon isotopic analyses show that the oil and natural gas of the Ahe Formation originated from different sources. The natural gas was derived from Jurassic coal measure source rocks, whereas the oil has mixed sources of Lower Triassic lacustrine source rocks and minor amounts of coal-derived oil from Jurassic coal measure source rocks. The geochemistry of light hydrocarbon components and n-alkanes shows that the early accumulated oil was later altered by infilling gas due to gas washing. Consequently, n-alkanes in the oil are scarce, whereas naphthenic and aromatic hydrocarbons with the same carbon numbers are relatively abundant. The fluids in the Ahe Formation gas reservoirs have an unusual distribution, where oil is distributed above gas and water is locally produced from the middle of some gas reservoirs. The geochemical characteristics of the fluids show that this anomalous distribution was closely related to the dynamic accumulation of oil and gas. The period of reservoir densification occurred between the two stages of oil and gas accumulation, which led to the early accumulated oil and part of the residual formation water being trapped in the tight reservoir. After later gas filling into the reservoir, the fluids could not undergo gravity differentiation, which accounts for the anomalous distribution of fluids in the Ahe Formation.

scholarly journals Study on Geochemical Characteristics of tight sandstone gas accumulation in Linxing area

2020 ◽  
Vol 206 ◽  
pp. 01017
Author(s):  
Yangbing Li ◽  
Weiqiang Hu ◽  
Xin Chen ◽  
Litao Ma ◽  
Cheng Liu ◽  
...  
Keyword(s):  
Source Rock ◽  
Ordos Basin ◽  
Source Rocks ◽  
Hydrocarbon Generation ◽  
Light Hydrocarbons ◽  
Tight Sandstone ◽  
Source Type ◽  
Reservoir Type ◽  
Sandstone Reservoir ◽  
Main Component

Based on the comprehensive analysis of the characteristics of tight sandstone gas composition, carbon isotope, light hydrocarbons and source rocks in Linxing area of Ordos Basin, the reservoir-forming model of tight sandstone gas in this area is discussed. The study shows that methane is the main component of tight sandstone gas, with low contents of heavy hydrocarbons and non-hydrocarbons, mainly belonging to dry gas in the Upper Paleozoic in Linxing area. The values of δ13C1, δ13C2 and δ13C3 of natural gas are in the ranges of -45.6‰ ~ -32.9‰, -28.9‰ ~ -22.3‰ and -26.2‰~ -19.1‰, respectively. The carbon isotopic values of alkane gas show a general trend of positive carbon sequence. δ13C1 value is less than -30‰, with typical characteristics of organic genesis. There is a certain similarity in the composition characteristics of light hydrocarbons. The C7 series show the advantage of methylhexane, while the C5-7 series mainly shows the advantage of isoalkane. The tight sandstone gas in this area is mainly composed of mature coal-derived gas, containing a small amount of coal-derived gas and oil-type gas mixture. According to the mode of hydrocarbon generation, diffusion and migration of source rocks in Linxing area, the tight sandstone gas in the study area can be divided into three types of reservoir-forming assemblages: the upper reservoir type of the far-source type (upper Shihezi formation-shiqianfeng formation sandstone reservoir-forming away from source rocks), the upper reservoir type of the near-source type ( the Lower Shihezi formation sandstone reservoir-outside the source rock), and the self-storage type of the source type (Shanxi formation-Taiyuan formation source rock internal sand reservoir).

Hydrocarbon fluid inclusions in the Argo salt, offshore Canadian Atlantic margin

2013 ◽  
Vol 50 (6) ◽  
pp. 607-635 ◽  
Author(s):  
Yawooz A. Kettanah
Keyword(s):  
Fluid Inclusions ◽  
Fluorescent Microscopy ◽  
Freezing Temperature ◽  
Homogenization Temperature ◽  
Source Rocks ◽  
Late Triassic ◽  
Peritectic Temperature ◽  
Petroleum Systems ◽  
Initial Melting ◽  
Atlantic Margin

Fluid inclusions hosted in rock salt from the Triassic Argo Formation in the Canadian Atlantic continental margin were studied to investigate the nature and origin of petroleum fluids in them. Inclusions were studied in two wells: Glooscap-C63 and Weymouth-A45. The pillow-shaped salt body intersected by the Glooscap-C63 well is autochthonous, and the salt is transparent and colorless compared with that in the allochthonous, canopy–diaper-shaped body cut by the Weymouth-A45 well which is translucent and buff-colored. Aqueous (AFI), petroleum (PFI), and heterogeneously trapped, mixed petroleum – aqueous (MFI) fluid inclusions were identified using transmitted and fluorescent microscopy, and representative samples were analyzed microthermometrically. Petroleum-bearing fluid inclusions (PFI and MFI) are more common and contain more concentrated petroleum phases in the allochthonous salts of Weymouth-A45 well. Based on microthermometric studies, the AFI and MFI in Glooscap-C63 salt mostly belong to NaCl–H2O and NaCl–H2O–petroleum systems, respectively; in contrast, those of Weymouth-A45 belong to NaCl–MgCl2–H2O and (or) NaCl–CaCl2–H2O and NaCl–MgCl2–H2O–petroleum and (or) NaCl–CaCl2–H2O–petroleum systems, respectively. Each of the AFI, PFI, and MFI types consists of different phases. The medians of Tf (freezing temperature), Tim (initial melting temperature), Te (Eutectic temperature), Tm (final melting (peritectic) temperature), and Th (homogenization temperature) in the AFI and MFI in the salts of Glooscap-C63 well are (−82, −75 °C), (−39, −38 °C), (−25, −24 °C), (−1.8, −3 °C), and (291, 287 °C), respectively. The corresponding medians for the Weymouth-A45 well are (−71, −78 °C), (−52, −52 °C), (−37, −38 °C), (−2.7, −3 °C), and (122, 20 °C), respectively. The median Th of PFI in Glooscap-C63 and Weymouth-A45 salts are 79 and 23 °C, respectively. The most probable source rocks for the petroleum are the shales of the Late Triassic – Early Jurassic Eurydice Formation which is widely distributed at depth underlying the Argo salt.

Sign in / Sign up

Export Citation Format

Share Document