scholarly journals Effect of Annular Gas-Liquid Two-Phase Flow on Dynamic Characteristics of Drill String

2021 ◽  
Vol 2021 ◽  
pp. 1-13
Author(s):  
Baojin Wang ◽  
Zhongyang Wang ◽  
Liuci Wang ◽  
Pengyu Sun
Keyword(s):  
Natural Gas ◽  
Flow Velocity ◽  
Dynamic Characteristics ◽  
Gas Flow ◽  
Two Phase Flow ◽  
Drilling Fluid ◽  
Equivalent Stress ◽  
Drill String ◽  
Phase Flow ◽  
Two Phase

Natural gas hydrate (NGH) is a kind of new type green energy source with giant reserves which has been thought of highly by energy explorers in the world. However, NGH breaks down to produce some natural gas that enters the annulus and flows together with the drilling fluid. The gas-liquid two-phase flow can have an impact on the work of the drill string. Therefore, it is important to study gas-liquid two-phase flow in the annulus on the dynamic characteristics of the drill string. In this article, taking a single drill string as the research object, a fluid-structure coupled finite element mathematical model of two-phase flow in the annulus and drill string is established based on computational fluid dynamics and computational structural dynamics theory. The finite element numerical simulation method is used to analyze the influence of drilling fluid and natural gas in the annulus on the dynamic characteristics of the drill string. The simulation analysis shows the following: (1) The motion of drilling fluid or natural gas in the annulus will reduce the natural frequency of the drill string, and the drilling fluid has a greater impact on the natural frequency of the drill string. (2) When single-phase drilling fluid flows in the annulus, the displacement peak in different directions, maximum equivalent stress, and strain of the drill string increase with the increase of the drilling fluid flow velocity or pressure, and the drilling fluid pressure has a more significant effect. (3) When the gas-liquid two-phase fluid flows in the annulus, the displacement peak, maximum equivalent stress, velocity amplitude, and acceleration amplitude of the drill string all increase with the natural gas flow velocity and natural gas content increase, and the natural gas flow velocity has a more significant effect.

The influence of the Stokes and Archimedes forces on the stability of a two-phase flow

2003 ◽  
Vol 3 ◽  
pp. 266-270
Author(s):  
B.H. Khudjuyerov ◽  
I.A. Chuliev
Keyword(s):  
Spectral Method ◽  
Stability Region ◽  
Gas Flow ◽  
Two Phase Flow ◽  
Solid Phase ◽  
Stability Characteristic ◽  
Phase Flow ◽  
Two Phase ◽  
The Stability

The problem of the stability of a two-phase flow is considered. The solution of the stability equations is performed by the spectral method using polynomials of Chebyshev. A decrease in the stability region gas flow with the addition of particles of the solid phase. The analysis influence on the stability characteristic of Stokes and Archimedes forces.

Experimental, Numerical, and Statistical Investigation of Two Phase Flow in a Cylindrical Perforation Tunnel

2021 ◽  
Author(s):  
Ekhwaiter Abobaker ◽  
Abadelhalim Elsanoose ◽  
Mohammad Azizur Rahman ◽  
Faisal Khan ◽  
Amer Aborig ◽  
...  
Keyword(s):  
Numerical Simulation ◽  
Steady State ◽  
Statistical Analysis ◽  
Flow Rate ◽  
Gas Flow ◽  
Two Phase Flow ◽  
Phase Flow ◽  
Gas Flow Rate ◽  
Two Phase ◽  
Flow Through

Abstract Perforation is the final stage in well completion that helps to connect reservoir formations to wellbores during hydrocarbon production. The drilling perforation technique maximizes the reservoir productivity index by minimizing damage. This can be best accomplished by attaining a better understanding of fluid flows that occur in the near-wellbore region during oil and gas operations. The present work aims to enhance oil recovery by modelling a two-phase flow through the near-wellbore region, thereby expanding industry knowledge about well performance. An experimental procedure was conducted to investigate the behavior of two-phase flow through a cylindrical perforation tunnel. Statistical analysis was coupled with numerical simulation to expand the investigation of fluid flow in the near-wellbore region that cannot be obtained experimentally. The statistical analysis investigated the effect of several parameters, including the liquid and gas flow rate, liquid viscosity, permeability, and porosity, on the injection build-up pressure and the time needed to reach a steady-state flow condition. Design-Expert® Design of Experiments (DoE) software was used to determine the numerical simulation runs using the ANOVA analysis with a Box-Behnken Design (BBD) model and ANSYS-FLUENT was used to analyses the numerical simulation of the porous media tunnel by applying the volume of fluid method (VOF). The experimental data were validated to the numerical results, and the comparison of results was in good agreement. The numerical and statistical analysis demonstrated each investigated parameter’s effect. The permeability, flow rate, and viscosity of the liquid significantly affect the injection pressure build-up profile, and porosity and gas flow rate substantially affect the time required to attain steady-state conditions. In addition, two correlations obtained from the statistical analysis can be used to predict the injection build-up pressure and the required time to reach steady state for different scenarios. This work will contribute to the clarification and understanding of the behavior of multiphase flow in the near-wellbore region.

An Evaluation of Existing Two-Phase Flow Correlations for Use With ASME Sharp Edge Metering Orifices

1977 ◽  
Vol 99 (3) ◽  
pp. 343-347 ◽  
Author(s):  
L. T. Smith ◽  
J. W. Murdock ◽  
R. S. Applebaum
Keyword(s):  
Natural Gas ◽  
Data Base ◽  
Root Mean Square ◽  
Two Phase Flow ◽  
Salt Water ◽  
Sharp Edge ◽  
Phase Flow ◽  
Mean Square ◽  
Two Phase ◽  
Liquid Flows

The two-phase flow correlations developed by Murdock, James, Marriott, and Smith and Leang are evaluated for the case of flow through sharp edge measuring orifices which physically meet ASME standards for flow measurement. The evaluation is based on two sets of consistent orifice flow data. The first data base consists of 34 test points for the flow of steam-water mixtures. The second data base consists of 81 data points for the flow of air-water, natural gas-water, natural gas-salt water, and natural gas-distillate mixtures. The root mean square fractional deviation of each correlation is used to determine its predictive reliability. Computed root mean square fraction deviations for steam-water flows are: James, ±0.081; Marriott, ±0.114; Murdock, ±0.141; Smith and Leang, ±0.218. For the case of gas-liquid flows, the values are: Murdock, ±0.074; James, ±0.178; Smith and Leang, ±0.183; Marriott, ±0.458.

Development of Models Correlating Vibration Excitation Forces to Dynamic Characteristics of Two-Phase Flow in a Tube Bundle

2007 ◽  
Author(s):  
C. Zhang ◽  
M. J. Pettigrew ◽  
N. W. Mureithi
Keyword(s):  
Dynamic Characteristics ◽  
Two Phase Flow ◽  
Tube Bundle ◽  
Flow Path ◽  
Main Flow ◽  
Phase Flow ◽  
Two Phase ◽  
Drag Forces ◽  
Vibration Excitation ◽  
Lift Forces

Recent experiments reveal that somewhat unexpected but significant quasi-periodic forces in both the drag and lift directions existed in a rotated triangular tube bundle subjected to two-phase cross flow. The quasi-periodic drag forces appear to be related to the momentum flux fluctuations in the main flow path between the cylinders. The quasi-periodic lift forces, on the other hand, are mostly correlated to the oscillation in the wake of the cylinders. The objective of this work is to develop semi-analytical models for correlating vibration excitation forces to dynamic characteristics of two-phase flow in a rotated triangular tube bundle and understanding the nature of vibration excitation forces. The relationships between the lift or drag forces and the dynamic characteristics of two-phase flow are established through fluid mechanics momentum equations. A model has been developed to correlate the void fraction fluctuation in the main flow path and the dynamic drag forces. A second model has been developed for correlating the oscillation in the wake of the cylinders and the dynamic lift forces. Although still preliminary, each model can predict the corresponding forces relatively well.

Sign in / Sign up

Export Citation Format

Share Document