scholarly journals Existence of solution to transpiration control problem

1992 ◽  
Vol 5 (4) ◽  
pp. 339-361 ◽  
Author(s):  
Guanstian Zhu ◽  
Jingang Wu ◽  
Benzhong Liang ◽  
Xinhua Ji ◽  
Xueshi Yang
Keyword(s):  
Numerical Calculation ◽  
Control Problem ◽  
High Speed ◽  
Practical Importance ◽  
Existence Of Solution ◽  
Dynamic Responses ◽  
Control Parameters ◽  
Mathematical Equations ◽  
The Given ◽  
High Speed Vehicle

Transpiration control can avoid change of the shape of a high-speed vehicle resulting from ablation of the nose, therefore also can avoid the change of the performance of Aerodynamics. Hence it is of practical importance. A set of mathematical equations and their boundary conditions are founded and justified by an example of non-ablation calculation in reference [1]. In [2], the ablation model is studied by the method of finite differences, the applicable margin of the equations is estimated through numerical calculation, and the dynamic responses of control parameters are analyzed numerically. In this paper we prove that the solution to transpiration control problem given in [1] exists uniquely under the assumption that the given conditions (i.e. given functions) are continuous.

Vibrations’ formation and transmission during high-speed trains’ operation

2017 ◽  
pp. 89-95
Author(s):  
Tamila Tytova ◽  
Aleksander Shashuryn ◽  
Konstantin Buzhynskiy ◽  
Valeriy Svetlov
Keyword(s):  
Calculation Method ◽  
High Speed ◽  
Practical Importance ◽  
Experimental Studies ◽  
Wave Impedance ◽  
Internal Loss ◽  
Vibration Attenuation ◽  
High Speed Trains ◽  
Vibration Wave ◽  
The Given

Objective: To determine the mechanisms of vibration’s occurrence and transmission during high-speed trains’ operation. Methods: The occurrence and transmission of vibration is calculated by means of vibration attenuation calculation method, which results from the extension of the vibration wave front in space, ground internal loss and elastic medium wave impedance. Results: Theoretical studies were generally confirmed by the results of experimental studies. Practical importance: Application of the given calculation method of vibration dumping in the early stages of high-speed railway lines construction, in order to predict the level of vibrations and select the means of level protection.

scholarly journals Droplet impact onto a spring-supported plate: analysis and simulations

2021 ◽  
Vol 128 (1) ◽  
Author(s):  
Michael J. Negus ◽  
Matthew R. Moore ◽  
James M. Oliver ◽  
Radu Cimpeanu
Keyword(s):  
High Speed ◽  
Flexible Substrate ◽  
Practical Importance ◽  
Hybrid Approach ◽  
Hydrodynamic Pressure ◽  
Analytical Framework ◽  
Canonical System ◽  
Linear Process ◽  
Plate Motion ◽  
The Impact

AbstractThe high-speed impact of a droplet onto a flexible substrate is a highly non-linear process of practical importance, which poses formidable modelling challenges in the context of fluid–structure interaction. We present two approaches aimed at investigating the canonical system of a droplet impacting onto a rigid plate supported by a spring and a dashpot: matched asymptotic expansions and direct numerical simulation (DNS). In the former, we derive a generalisation of inviscid Wagner theory to approximate the flow behaviour during the early stages of the impact. In the latter, we perform detailed DNS designed to validate the analytical framework, as well as provide insight into later times beyond the reach of the proposed analytical model. Drawing from both methods, we observe the strong influence that the mass of the plate, resistance of the dashpot, and stiffness of the spring have on the motion of the solid, which undergo forced damped oscillations. Furthermore, we examine how the plate motion affects the dynamics of the droplet, predominantly through altering its internal hydrodynamic pressure distribution. We build on the interplay between these techniques, demonstrating that a hybrid approach leads to improved model and computational development, as well as result interpretation, across multiple length and time scales.

The Engagement of Hybrid Ultra High Space Division Multiplexing with Maximum Time Division Multiplexing Techniques for High-Speed Single-Mode Fiber Cable Systems

2019 ◽  
Vol 0 (0) ◽  
Author(s):  
I. S. Amiri ◽  
P. G. Kuppusamy ◽  
Ahmed Nabih Zaki Rashed ◽  
P. Jayarajan ◽  
M. R. Thiyagupriyadharsan ◽  
...  
Keyword(s):  
Communication Systems ◽  
High Speed ◽  
Single Mode ◽  
Single Mode Fiber ◽  
Design Parameters ◽  
Control Parameters ◽  
Data Rates ◽  
Fiber Optic Communication ◽  
High Space ◽  
Optic Communication

AbstractHigh-speed single-mode fiber-optic communication systems have been presented based on various hybrid multiplexing schemes. Refractive index step and silica-doped germanium percentage parameters are also preserved during their technological boundaries of attention. It is noticed that the connect design parameters suffer more nonlinearity with the number of connects. Two different propagation techniques have been used to investigate the transmitted data rates as a criterion to enhance system performance. The first technique is soliton propagation, where the control parameters lead to equilibrium between the pulse spreading due to dispersion and the pulse shrinking because of nonlinearity. The second technique is the MTDM technique where the parameters are adjusted to lead to minimum dispersion. Two cases are investigated: no dispersion cancellation and dispersion cancellation. The investigations are conducted over an enormous range of the set of control parameters. Thermal effects are considered through three basic quantities, namely the transmission data rates, the dispersion characteristics, and the spectral losses.

scholarly journals Mobile and immobile boundaries in ferroelectric films

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
P. Yudin ◽  
K. Shapovalov ◽  
T. Sluka ◽  
J. Peräntie ◽  
H. Jantunen ◽  
...  
Keyword(s):  
Long Range ◽  
Domain Walls ◽  
Ferroelectric Properties ◽  
Practical Importance ◽  
Dynamic Responses ◽  
Ferroelectric Films ◽  
Domain Structures ◽  
Mobile Interfaces ◽  
Ferroelastic Domains ◽  
Viable Method

AbstractThe intrinsic mobile interfaces in ferroelectrics—the domain walls can drive and enhance diverse ferroelectric properties, essential for modern applications. Control over the motion of domain walls is of high practical importance. Here we analyse theoretically and show experimentally epitaxial ferroelectric films, where mobile domain walls coexist and interact with immobile growth-induced interfaces—columnar boundaries. Whereas these boundaries do not disturb the long-range crystal order, they affect the behaviour of domain walls in a peculiar selective manner. The columnar boundaries substantially modify the behaviour of non-ferroelastic domains walls, but have negligible impact on the ferroelastic ones. The results suggest that introduction of immobile boundaries into ferroelectric films is a viable method to modify domain structures and dynamic responses at nano-scale that may serve to functionalization of a broader range of ferroelectric films where columnar boundaries naturally appear as a result of the 3D growth.

scholarly journals Analysis study the used of Tuned Mass Damper (TMD) on an existing train bridge due to high speed train with moving mass load approach

2019 ◽  
Vol 258 ◽  
pp. 05005 ◽  
Author(s):  
Wivia Octarena Nugroho ◽  
Dina Rubiana Widarda ◽  
Oryza Herdha Dwyana
Keyword(s):  
High Speed ◽  
Tuned Mass Damper ◽  
Dynamic Responses ◽  
Mass Ratio ◽  
High Speed Train ◽  
Maximum Deformation ◽  
Mass Load ◽  
Mass Damper ◽  
Existing Bridges ◽  
Comfort Criteria

As the need of the train speed increased, the existing bridges need to be evaluated, especially in dynamic responses, which are deformation and acceleration. In this study, Cisomang Bridge is modeled and analyzed due to the high-speed train SJ X2 in varying speeds, 50 km/h, 100 km/h, 150 km/h, and 200 km/h. The used of tuned mass damper also will be varied on its setting and placing. The tuned mass dampers setting be varied based on the first or second natural frequency and the placing of tuned mass damper be varied based on maximum deformation of the first or second mode. Moreover, the tuned mass damper ratio will be varied 1% and 1.6%. For all speed variations, dynamic responses of structure without TMD still fulfil the Indonesian Government Criterion based on PM 60 - 2012 but do not meet requirement of comfort criteria based on DIN-Fachbericht 101. Furthermore, only for the speed train 50km/h dynamic responses of structure fulfil safety criteria based on Eurocode EN 1990:2002, whereas the other speed variations do not meet that requirement. In the use of TMD 1% mass ratio, the structure fulfils the safety criteria for all speed variations. In the use of TMD 1.6% mass ratio, all the structure fulfils the safety and comfort criteria except 100 km/h speed which only fulfils the safety criteria.

Numerical Calculation of Aerodynamic Noise for the Nose Cone Surface in High Speed Airflow Field

2014 ◽  
Vol 488-489 ◽  
pp. 886-891
Author(s):  
Ai Jian Zheng ◽  
Feng Niu ◽  
Hai Jiang Zhu
Keyword(s):  
Numerical Calculation ◽  
High Speed ◽  
Aerodynamic Noise ◽  
Element Analysis ◽  
Analysis Theory ◽  
Nose Cone ◽  
Flow Induced Noise ◽  
Airflow Field ◽  
Boundary Element Analysis ◽  
Acoustic Boundary Element

This paper presents two nose cones models and their numerical calculation of aerodynamic noise in high speed airflow field combining the analysis theory of fluid dynamics with the acoustic boundary element analysis method. The noise sound pressure levels (SPL) of these two models are calculated under the different speed airflow. And we compare the SPL of the better model with that of commercial nose cone models. These simulated results show that the aerodynamic noise of the nose cone with a ellipsoid head has lower flow-induced noise than that of commercial nose cone models at relative high air flow velocities at most frequencies.

Analysis, Design, and Optimization of High Speed Vehicle Suspensions Using State Variable Techniques

1974 ◽  
Vol 96 (2) ◽  
pp. 193-203 ◽  
Author(s):  
J. K. Hedrick ◽  
G. F. Billington ◽  
D. A. Dreesbach
Keyword(s):  
High Speed ◽  
Optimization Problems ◽  
Vertical Plane ◽  
Computer Application ◽  
Vehicle Suspension ◽  
State Variables ◽  
State Variable ◽  
Suspension Parameters ◽  
Suspension Model ◽  
High Speed Vehicle

This article applies state variable techniques to high speed vehicle suspension design. When a reasonably complex suspension model is treated, the greater adaptability of state variable techniques to digital computer application makes it more attractive than the commonly used integral transform method. A vehicle suspension model is developed, state variable techniques are applied, numerical methods are presented, and, finally, an optimization algorithm is chosen to select suspension parameters. A fairly complete bibliography is included in each of these areas. The state variable technique is illustrated in the solution of two suspension optimization problems. First, the vertical plane suspension of a high speed vehicle subject to guideway and aerodynamic inputs will be analyzed. The vehicle model, including primary and secondary suspension systems, and subject to both heave and pitch motions, has thirteen state variables. Second, the horizontal plane suspension of a high speed vehicle subject to guideway and lateral aerodynamic inputs is analyzed. This model also has thirteen state variables. The suspension parameters of both these models are optimized. Numerical results are presented for a representative vehicle, showing time response, mean square values, optimized suspension parameters, system eigenvalues, and acceleration spectral densities.

Sign in / Sign up

Export Citation Format

Share Document