scholarly journals Fluid evolution from quartz veins in micaschists from the thermal aureole around the Acari batholith, Northeast Brazil

2021 ◽  
Vol 21 (4) ◽  
pp. 13-30
Author(s):  
Laécio Cunha de Souza ◽  
Regina Celia de Oliveira Brasil Delgado ◽  
Heitor Neves Maia
Keyword(s):  
Fluid Inclusions ◽  
Aqueous Fluid ◽  
Fluid Circulation ◽  
Two Phase ◽  
Quartz Veins ◽  
Melting Temperatures ◽  
Three Phase ◽  
Higher Temperature ◽  
Homogenization Temperatures ◽  
Liquid Vapor

Micaschists that host the Acari batholith (Ediacaran age, 572 to 577 My) are characterized by a large number of quartz veins. The veins are more abundant in higher-temperature metamorphic zones and, together with lower metamorphic zones, form an aureole centered in the batholith. Most of the fluid inclusions are two-phase (H2O-CO2 and liquid/vapor), but three-phase varieties (liquid/vapor/salt cubes; liquid/liquid/vapor) occur locally. The analyzed veins come from the biotite + chlorite + muscovite, biotite + garnet, cordierite + andalusite, and cordierite + sillimanite metamorphic zones. CO2 melting temperatures (TmCO2) vary from -62.6 to -56.7°C, suggesting CH4 and/or N2. Eutectic temperatures (Te) in quartz veins show average values of -30.8°C in the biotite + chlorite + muscovite and biotite + garnet zones, and -38.6°C in the cordierite + andalusite and cordierite + sillimanite zones. Ice-melting temperatures (Tmice) are lower in the higher-temperature metamorphic zones. The mode values are -3.8, -5.5, -5.6, and -7.3°C, corresponding respectively to the biotite + chlorite + muscovite, biotite + garnet, cordierite + andalusite, and cordierite + sillimanite zones. A fluid characterized by the H2O-Na-Cl (KCl)-MgCl2-FeCl2-CaCl2 system is defined by: Tmice from near -1.9 to -32°C, the presence of salt cubes mainly in the cordierite + andalusite and cordierite + sillimanite zones, and recorded eutectic temperatures (Te) from -16.5 to -59.1°C. In addition, total homogenization temperatures (Tht) ranging from 117 to 388°C were obtained for primary aqueous fluid inclusions. This indicates a long period of fluid circulation under conditions of falling temperatures. Our results are consistent with an increase in the salinity of the aqueous fluid across the thermal aureole toward the granitic batholith.

scholarly journals Genesis of the Longmendian Ag–Pb–Zn Deposit in Henan (Central China): Constraints from Fluid Inclusions and H–C–O–S–Pb Isotopes

Geofluids ◽  
2020 ◽  
Vol 2020 ◽  
pp. 1-21
Author(s):  
Xinglin Chen ◽  
Yongjun Shao ◽  
Chunkit Lai ◽  
Cheng Wang
Keyword(s):  
Fluid Inclusions ◽  
Central China ◽  
Granitic Magma ◽  
Two Phase ◽  
Quartz Veins ◽  
The North ◽  
Granitic Magmatism ◽  
Polymetallic Sulfides ◽  
Homogenization Temperatures ◽  
Stage 1

The Longmendian Ag–Pb–Zn deposit is located in the southern margin of the North China Craton, and the mineralization occurs mainly in quartz veins, altered gneissic wallrocks, and minor fault breccias in the Taihua Group. Based on vein crosscutting relations, mineral assemblages, and paragenesis, the mineralization can be divided into three stages: (1) quartz–pyrite, (2) quartz–polymetallic sulfides, and (3) quartz–carbonate–polymetallic sulfides. Wallrock alteration can be divided into three zones, i.e., chlorite–sericite, quartz–carbonate–sericite, and silicate. Fluid inclusions in all Stage 1 to 3 quartz are dominated by vapor-liquid two-phase aqueous type (W-type). Petrographic and microthermometric analyses of the fluid inclusions indicate that the homogenization temperatures of Stages 1, 2, and 3 are 198–332°C, 132–260°C, and 97–166°C, with salinities of 4.0–13.3, 1.1–13.1, and 1.9–7.6 wt% NaCleqv, respectively. The vapor comprises primarily H2O, with some CO2, H2, CO, N2, and CH4. The liquid phase contains Ca2+, Na+, K+, SO42−, Cl−, and F−. The sulfides have δ34S=–1.42 to +2.35‰ and 208Pb/204Pb=37.771 to 38.795, 207Pb/204Pb=15.388 to 15.686, and 206Pb/204Pb=17.660 to 18.101. The H–C–O–S–Pb isotope compositions indicate that the ore-forming materials may have been derived from the Taihua Group and the granitic magma. The fluid boiling and cooling and mixing with meteoric water may have been critical for the Ag–Pb–Zn ore precipitation. Geological and geochemical characteristics of the Longmendian deposit indicate that the deposit is best classified as medium- to low-temperature intermediate-sulfidation (LS/IS) epithermal-type, related to Cretaceous crustal-extension-related granitic magmatism.

scholarly journals Easily altered minerals and reequilibrated fluid inclusions provide extensive records of fluid and thermal history: gypsum pseudomorphs of the Tera Group, Tithonian-Berriasian, Cameros Basin

2012 ◽  
Vol 4 (2) ◽  
Author(s):  
Laura González-Acebrón ◽  
Robert Goldstein ◽  
Ramon Mas ◽  
Jose Arribas
Keyword(s):  
Fluid Inclusions ◽  
Thermal History ◽  
Isotopic Analysis ◽  
Northern Spain ◽  
Quartz Veins ◽  
Cameros Basin ◽  
Complex Fluid ◽  
Higher Temperature ◽  
Homogenization Temperatures ◽  
Lower Temperature

AbstractThis study reports a complex fluid and thermal history using petrography, electron microprobe, isotopic analysis and fluid inclusions in replacement minerals within gypsum pseudomorphs in Tithonian-Berriasian lacustrine deposits in Northern Spain. Limestones and dolostones, formed in the alkaline lakes, contain lenticularly shaped gypsum pseudomorphs, considered to form in an evaporative lake. The gypsum was replaced by quartz and non-ferroan calcite (Ca-2), which partially replaces the quartz. Quartz contains solid inclusions of a preexisting non-ferroan calcite (Ca-1), anhydrite and celestine.High homogenization temperatures (T h) values and inconsistent thermometric behaviour within secondary fluid inclusion assemblages in quartz (147–351°C) and calcite (108–352°C) indicate high temperatures after precipitation and entrapment of lower temperature FIAs. Th are in the same range as other reequilibrated fluid inclusions from quartz veins in the same area that are related to Cretaceous hydrothermalism.Gypsum was replaced by anhydrite, likely during early burial. Later, anhydrite was partially replaced by Ca-1 associated with intermediate burial temperatures. Afterward, both anhydrite and Ca-1 were partially replaced by quartz and this by Ca-2. All were affected during higher temperature hydrothermalism and a CO2-H2O fluid. Progressive heating and hydrothermal pulses, involving a CO2-H2O fluid, produce the reequilibration of the FIAs, which was followed by uplift and cooling.

scholarly journals Petrogenesis, Ore Mineralogy, and Fluid Inclusion Studies of the Tagu Sn–W Deposit, Myeik, Southern Myanmar

Minerals ◽  
2019 ◽  
Vol 9 (11) ◽  
pp. 654
Author(s):  
Kyaw Thu Htun ◽  
Kotaro Yonezu ◽  
Aung Zaw Myint ◽  
Thomas Tindell ◽  
Koichiro Watanabe
Keyword(s):  
Fluid Inclusions ◽  
Type A ◽  
Type B ◽  
Two Phase ◽  
Metasedimentary Rocks ◽  
Quartz Veins ◽  
Liquid Co2 ◽  
Type C ◽  
Homogenization Temperatures ◽  
Two Phases

Most of the granite-related Sn–W deposits in Myanmar are located in the Western Granitoid Province (WGP) of Southeast Asia. The Tagu deposit in the southern part of the WGP is a granite related Sn–W deposit. The biotite granite is composed of quartz, feldspars (plagioclase, orthoclase, and microcline), and micas (muscovite and biotite) and belongs to S-type peraluminous granite. Abundances of large-ion lithophile elements (LILEs), such as Rb, K, and Pb, coupled with the deficiency of high-field-strength elements (HFSEs), such as Nb, P, and Ti, indicate that the parental magma for the Tagu granite was derived from the lower continental crust at syn-collisional setting. Mineralized veins consist of early-formed oxide ore minerals, such as cassiterite and wolframite, which were followed by the formation of sulfide minerals. Three main types of fluid inclusions were distinguished from the mineralized quartz veins hosted by granite and metasedimentary rocks: Type-A—two phases, liquid (L) + vapor (V) aqueous inclusions; Type-B—two phases, vapor (V) + liquid (L) vapor-rich inclusions; And type-C—three phases, liquid + CO2-liquid + CO2-vapor inclusions. Quartz in the veins hosted in granite corresponding with earlier deposition contains type-A, type-B, and type-C fluid inclusions, whereas that in the veins hosted in metasedimentary rocks corresponding with later deposition contains only type-A fluid inclusions. The homogenization temperatures of type-A inclusions range from 140 °C to 330 °C (mode at 230 °C), with corresponding salinities from 1.1 wt.% to 8.9 wt.% NaCl equivalent for quartz veins hosted in metasedimentary rocks, and from 230 °C to 370 °C (mode at 280 °C), with corresponding salinities from 2.9 wt.% to 10.6 wt.% NaCl equivalents for quartz veins hosted in granite. The homogenization temperatures of type-B vapor-rich inclusions in quartz veins in granite range from 310 °C to 390 °C (mode at 350 °C), with corresponding salinities from 6.7 wt.% to 12.2 wt.% NaCl equivalent. The homogenization temperatures of type-C H2O–CO2–NaCl inclusions vary from 270 °C to 405 °C (mode at 330 °C), with corresponding salinities from 1.8 wt.% to 5.6 wt.% NaCl equivalent. The original ascending ore fluid was probably CO2-bearing fluid which evolved into two phase fluid by immiscibility due to pressure drop in the mineralization channels. Furthermore, the temperature and salinities of two-phase aqueous fluids were later most likely decreased by the mixing with meteoric water. The salinities of the type-B vapor-rich inclusions are higher than those of the type-C CO2-rich inclusions, which may have resulted from CO2 separation from the fluids. The escape of gases can lead to an increase in the salinity of the residual fluids. Therefore, the main ore-forming mechanisms of the Tagu Sn–W deposit are characterized by fluid immiscibility during an early stage, and fluid mixing with meteoric water in the late stage at a lower temperature.

Telluride Mineralogy of the Deer Horn Au-Ag-Te-(Bi-Pb-W) Deposit, British Columbia: Implications for the Generation of Tellurides

2021 ◽  
Author(s):  
Jordan A. Roberts ◽  
Lee A. Groat ◽  
Paul G. Spry ◽  
Jan Cempírek
Keyword(s):  
British Columbia ◽  
Fluid Inclusions ◽  
Hanging Wall ◽  
Oscillatory Zoning ◽  
Stage Iii ◽  
Fine Grained ◽  
Melting Temperatures ◽  
Homogenization Temperatures ◽  
Intrusive Suite ◽  
Cathodoluminescence Imaging

ABSTRACT The Deer Horn deposit, located 150 km south of Smithers in west-central British Columbia, is an Eocene polymetallic system enriched in Au-Ag-Te with lesser amounts of Bi-Pb-W; the Au and Ag are hosted in Te-bearing minerals and Ag-rich gold (Au-Ag alloy). A quartz-sulfide vein system containing the main zones of Au-Ag-Te mineralization and attendant sericite alteration occurs in the hanging wall of a local, spatially related thrust fault and is genetically related to the nearby Eocene Nanika granodiorite intrusive suite. Tellurium-bearing minerals commonly form isolated euhedral to subhedral grains or composite grains (up to 525 μm in size) of Ag-, Bi-, Pb-, and Au-rich tellurium-bearing minerals (e.g., hessite, tellurobismuthite, volynskite, altaite, and petzite). Panchromatic cathodoluminescence imaging revealed four generations of quartz. Within remnant cores of quartz I, local oscillatory zoning occurs in quartz II. Fine-grained veinlets of quartz III and IV crosscut quartz I and II, showing evidence of at least two deformation events; late-forming veinlets of calcite crosscut all generations of quartz. The tellurides and Ag-rich gold occur in stage III quartz. Three types of fluid inclusions were observed in stage III and IV quartz: (1) aqueous liquid and vapor inclusions (L-V); (2) aqueous carbonic inclusions (L-L-V); and (3) carbonic inclusions (vapor-rich). Primary fluid inclusions related to the telluride mineralization within quartz III were tested with microthermometry, along with a few primary inclusions from quartz IV. Homogenization temperatures are 130.0–240.5 °C for L-V inclusions and 268.0–336.4 °C for L-L-V inclusions. Aqueous carbonic inclusions had solid CO2 melting temperatures from –62.1 to –56.8 °C, indicating the presence of ≈1 to 30 mol.% dissolved methane in these inclusions. The Deer Horn Au-Ag-Te-(Bi-Pb-W) deposit is a reduced intrusion-related gold system characterized by sheeted veins, metal zoning, low salinity aqueous-carbonic fluids, and a genetic relationship to an Eocene granodiorite. Values of δ34S of pyrite vary from –1.6 to 1.6 per mil and are compatible with a magmatic source of sulfur.

Fluid flow and faulting history of the Iano tectonic window (Southern Tuscany, Italy).

2021 ◽  
Author(s):  
Paolo Fulignati ◽  
Martina Zucchi ◽  
Andrea Brogi ◽  
Enrico Capezzuoli ◽  
Domenico Liotta ◽  
...  
Keyword(s):  
Fluid Inclusions ◽  
Hydrothermal Fluids ◽  
Normal Faults ◽  
High Angle ◽  
Quartz Veins ◽  
History Of ◽  
Tectonic Window ◽  
Liquid Vapor

<p>In the Iano area (Southern Tuscany) a small tectonic window of Tuscan metamorphic units is observed. This belongs to the northernmost part of the so-called Mid-Tuscan ridge and, during Pliocene, formed a submarine high, now defining the easternmost shoulder of the Volterra Pliocene basin. The area gives the opportunity to investigate the complete cycle of negative inversion from crustal thickening to crustal thinning, which characterizes Southern Tuscany. Our new data focus on the western margin of the Iano ridge, and in particular on a system of high angle normal faults that represents the youngest structures of the investigated area. These structures, deformed low angle regional detachments locally juxtaposing the uppermost units of contractional nappe stack (the ophiolite-bearing Ligurian units), with the Tuscan metamorphic units, with an almost complete excision of at least 3.5 Km thick Mesozoic to Tertiary Tuscan nappe succession. The high angle normal faults show variable Plio-Quaternary vertical displacements from few meters to about 500 meters, and acted as pathways for the upwelling of hydrothermal fluids, as revealed by Pleistocene travertine deposits, hydrothermal alteration and occurrence of different generations of fluid inclusions in hydrothermal veins associated with these fault systems. Fluid inclusions were studied in quartz veins hosted in the Verrucano metasediments forming the top of the Tuscan metamorphic unit, as well as in some carbonate lithotypes (Cretaceous to Tertiary in age) of the overlying Tuscan Nappe. Two different kinds of fluid inclusions were documented. The Type 1 are multiphase (liquid + vapor + 1 daughter mineral) liquid-rich fluid inclusions whereas the Type 2 are two-phase (liquid + vapor) liquid-rich fluid inclusions. Type 1 fluid inclusions are primary in origin and were found only in quartz veins present in Verrucano metarudites, whereas Type 2 fluid inclusions occur in quartz veins present in both Verrucano phyllites and quartzites and in the carbonate units of the Tuscan Nappe. These are secondary and can be furthermore distinguished in two sub-populations (Type 2a and Type 2b) on the basis of petrographic observation and microthermometric data. Fluid inclusion investigation evidenced an evolution of the hydrothermal fluids from relatively high-T (~265°C) and hypersaline (35 wt.% NaCl<sub>equiv.</sub>) fluids trapped at about 100 MPa, to lower temperature (~195°C) and salinity (~9.5 wt.% NaCl<sub>equiv.</sub>) fluids, having circulated in the high-angle fault system. Based on the new data and a revision of the local tectonic setting a fluid-rock interaction history has been reconstructed with new hints and constraints for the Plio-Quaternary extensional history of the Volterra basin.</p>

scholarly journals Genetic aspects of barite mineralization related to rocks of the teschenite association in the Silesian Unit, Outer Western Carpathians, Czech Republic

2017 ◽  
Vol 68 (2) ◽  
pp. 119-129 ◽  
Author(s):  
Jakub Jirásek ◽  
Zdeněk Dolníček ◽  
Dalibor Matýsek ◽  
Tomáš Urubek
Keyword(s):  
Aqueous Fluid ◽  
Western Carpathians ◽  
Rock Matrix ◽  
Multiple Sources ◽  
Two Phase ◽  
Sulphur Isotope ◽  
Outer Western Carpathians ◽  
Supergene Processes ◽  
Homogenization Temperatures

AbstractBarite is a relatively uncommon phase in vein and amygdule mineralizations hosted by igneous rocks of the teschenite association in the Silesian Unit (Western Carpathians). In macroscopically observable sizes, it has been reported from 10 sites situated only in the Czech part of the Silesian Unit. Microscopic barite produced by the hydrothermal alteration of rock matrix and also by the supergene processes is more abundant. We examined four samples of barite by mineralogical and geochemical methods. Electron microprobe analyses proved pure barites with up to 0.038 apfu Sr and without remarkable internal zonation. Fluid inclusion and sulphur isotope data suggests that multiple sources of fluid components have been involved during barite crystallization. Barite contains primary and secondary aqueous all-liquid (L) or less frequent two-phase (L+V) aqueous fluid inclusions with variable salinity (0.4-2.9 wt. % NaCl eq.) and homogenization temperatures between 77 and 152 °C. The higher-salinity fluid endmember was probably Cretaceous seawater and the lower-salinity one was probably diagenetic water derived from surrounding flysch sediments during compaction and thermal alteration of clay minerals. The δ34S values of barite samples range between -1.0 ‰ and +16.4 ‰ CDT suggesting participation of two sources of sulphate, one with a near-zero δ34S values probably derived from wall rocks and another with high δ34S values being most probably sulphate from the Cretaceous seawater. All results underline the role of externally derived fluids during post-magmatic alteration of bodies of rock of the teschenite association.

Pressure-temperature-fluid constraints for the Emmaville-Torrington emerald deposit, New South Wales, Australia: Fluid inclusion and stable isotope studies

2012 ◽  
Vol 4 (2) ◽  
Author(s):  
Lara Loughrey ◽  
Dan Marshall ◽  
Peter Jones ◽  
Paul Millsteed ◽  
Arthur Main
Keyword(s):  
Fluid Inclusion ◽  
New South ◽  
Two Phase ◽  
Quartz Veins ◽  
South Wales ◽  
Three Phase ◽  
Liquid Portion ◽  
Isotope Studies ◽  
Two Fluid ◽  
Metasedimentary Sequence

AbstractThe Emmaville-Torrington emeralds were first discovered in 1890 in quartz veins hosted within a Permian metasedimentary sequence, consisting of meta-siltstones, slates and quartzites intruded by pegmatite and aplite veins from the Moule Granite. The emerald deposit genesis is consistent with a typical granite-related emerald vein system. Emeralds from these veins display colour zonation alternating between emerald and clear beryl. Two fluid inclusion types are identified: three-phase (brine+vapour+halite) and two-phase (vapour+liquid) fluid inclusions. Fluid inclusion studies indicate the emeralds were precipitated from saline fluids ranging from approximately 33 mass percent NaCl equivalent. Formational pressures and temperatures of 350 to 400 °C and approximately 150 to 250 bars were derived from fluid inclusion and petrographic studies that also indicate emerald and beryl precipitation respectively from the liquid and vapour portions of a two-phase (boiling) system. The distinct colour zonations observed in the emerald from these deposits is the first recorded emerald locality which shows evidence of colour variation as a function of boiling. The primary three-phase and primary two-phase FITs are consistent with alternating chromium-rich ‘striped’ colour banding. Alternating emerald zones with colourless beryl are due to chromium and vanadium partitioning in the liquid portion of the boiling system. The chemical variations observed at Emmaville-Torrington are similar to other colour zoned emeralds from other localities worldwide likely precipitated from a boiling system as well.

Chronology and orientation of N2–CH4, CO2-H2O, and H2O-rich fluid-inclusion trails in intrametamorphic quartz veins from the Cuiabá gold district, Brazil

1990 ◽  
Vol 54 (375) ◽  
pp. 245-255 ◽  
Author(s):  
C. J. S. de Alvarenga ◽  
M. Cathelineau ◽  
J. Dubessy
Keyword(s):  
Fluid Inclusion ◽  
Fluid Inclusions ◽  
Low Grade ◽  
Fluid Circulation ◽  
Raman Spectrometry ◽  
Mato Grosso ◽  
Spectrometry Analysis ◽  
Quartz Veins ◽  
Three Generations ◽  
Inclusion Trails

AbstractThe upper Proterozoic Cuiabá group of Mato Grosso, Brazil, is composed of low-grade clastic meta-sediments which have been folded by several successive tectonic events. Three generations of quartz veins are associated with the structural evolution of this area. The first veins are deformed by the main tectonic phases and show a complex deformational patterns. The second set is parallel to the cleavage and was formed syntectonically during the main folding phase, whilst the last quartz veins are related to a later stage of deformation. A systematic study of fluid inclusions in relation with a statistical study of microstructural markers (fluid inclusion trails, opened microcracks) was carried out on quartz veins from three localities. On the basis of microthermometric studies and Raman spectrometry analysis, four differents types of fluids have been distinguished, each trapped in specific fluid inclusion trails: (i) CO2-rich liquids and vapours (Lc, Vc) at Casa de Pedra, (ii) Lc and Vc inclusions with variable amounts of CO2, CH4, N2 in the vapour phase at BR-70, (iii) CH2-N2-rich vapours (Vn-m), and (iv) aqueous inclusions (L) with variable salinities representing the last fluid generations at all localities.At Casa de Pedra and BR-70, most fluids are observed within the three generations of quartz veins, indicating an important fluid circulation associated with the last phase of brittle deformation. Fluid inclusions of type (iii) and (iv) are oriented along several well defined directions. The study shows the importance of integrated microstructural and fluid-inclusion studies for understanding the geometry and chronology of fluid circulation.

scholarly journals Carbonic fluids in the Hamadi gold deposit, Sudan: origin and contribution to gold mineralization

2017 ◽  
Vol 54 (5) ◽  
pp. 494-511 ◽  
Author(s):  
Xi-hui Cheng ◽  
Jiu-hua Xu ◽  
Jian-xiong Wang ◽  
Qing-po Xue ◽  
Hui Zhang
Keyword(s):  
Gold Deposit ◽  
Melting Temperature ◽  
Fluid Inclusions ◽  
Gold Mineralization ◽  
Narrow Range ◽  
Shear Zones ◽  
Quartz Veins ◽  
Wide Range ◽  
Homogenization Temperatures ◽  
Gold Bearing

The Hamadi gold deposit is located in North Sudan, and occurs in the Neoproterozoic metamorphic strata of the Arabian–Nubian Shield. Two types of gold mineralization can be discerned: gold-bearing quartz veins and altered rock ores near ductile shear zones. The gold-bearing quartz veins are composed of white to gray quartz associated with small amounts of pyrite and other polymetallic sulfide minerals. Wall-rock alterations include mainly beresitization, epidotization, chloritization, and carbonatization. CO2-rich inclusions are commonly seen in gold-bearing quartz veins and quartz veinlets from gold-bearing altered rocks; these include mainly one-phase carbonic (CO2 ± CH4 ± N2) inclusions and CO2–H2O inclusions with CO2/H2O volumetric ratios of 30% to ∼80%. Laser Raman analysis does not show the H2O peak in carbonic inclusions. In quartz veins, the melting temperature of solid CO2 (Tm,CO2) of carbonic inclusions has a narrow range of −59.6 to −56.8 °C. Carbonic inclusions also have CO2 partial homogenization temperatures (Th,CO2) of −28.3 to +23.7 °C, with most of the values clustering between +4.0 and +20 °C; all of these inclusions are homogenized into the liquid CO2 state. The densities range from 0.73 to 1.03 g/cm3. XCH4 of carbonic fluid inclusions ranges from 0.004 to 0.14, with most XCH4 around 0.05. In CO2–H2O fluid inclusions, Tm,CO2 values are recorded mostly at around −57.5 °C. The melting temperature of clathrate is 3.8–8.9 °C. It is suggested that the lowest trapping pressures of CO2 fluids would be 100 to ∼400 MPa, on the basis of the Th,CO2 of CO2-bearing one-phase (LCO2) inclusions and the total homogenization temperatures (Th,tot) of paragenetic CO2-bearing two-phase (LCO2–LH2O) inclusions. For altered rocks, the Tm,CO2 of the carbonic inclusions has a narrow range of −58.4 to ∼−57.0 °C, whereas the Th,CO2 varies widely (−19 to ∼+29 °C). Most carbonic inclusions and the carbonic phases in the CO2–H2O inclusions are homogenized to liquid CO2 phases, which correspond to densities of 0.70 to ∼1.00 g/cm3. Fluid inclusions in a single fluid inclusion assemblage (FIA) have narrow Tm,CO2 and Th,CO2 values, but they vary widely in different FIAs and non-FIAs, which indicates that there was a wide range of trapping pressure and temperature (P–T) conditions during the ore-forming process in late retrograde metamorphism after the metamorphism peak period. The carbonic inclusions in the Hamadi gold deposit are interpreted to have resulted from unmixing of an originally homogeneous aqueous–carbonic mixture during retrogress metamorphism caused by decreasing P–T conditions. CO2 contributed to gold mineralization by buffering the pH range and increasing the gold concentration in the fluids.

Sign in / Sign up

Export Citation Format

Share Document