scholarly journals Interview with Stuart Walker

2017 ◽  
Vol 24 (43) ◽  
pp. 12
Author(s):  
Marilia Riul ◽  
Ingrid Moura Wanderley ◽  
Maria Cecilia Loschiavo dos Santos
Keyword(s):  
Product Design ◽  
Solid Waste ◽  
Mass Production ◽  
Social System ◽  
Design Research ◽  
National Policy ◽  
Human Values ◽  
Research Centre ◽  
Design For Sustainability ◽  
The University

Stuart Walker is Professor of Design for Sustainability and Co-Director of the Imagination Lancaster design research Centre at Lancaster University. Focused on design for sustainability; product aesthetics and meaning; practice-based design research and product design that explores and expresses both human values and notions of spirituality. He was interviewed in his second visit to Brazil to attend the Conference and Workshop "Design and the national policy of solid waste: dialogues on sustainability," held in the Sustainability Laboratory (Lassu) at the University of São Paulo (USP) in 2013, an activity of the research project sponsored by CNPq: Product design, sustainability and national policy on solid waste, coordinated by Professor Maria Cecilia Loschiavo dos Santos. Through the suggested questions, Professor Stuart Walker built a severe critique of our social system of mass production and reminded us that values really matter to our journey.

Microwave Modified Timber: Collaborative Research Integrating Product Design for New Materials Development

2011 ◽  
Vol 284-286 ◽  
pp. 615-619 ◽  
Author(s):  
Christine Thong ◽  
Simon Jackson
Keyword(s):  
Product Design ◽  
Collaborative Research ◽  
Design Research ◽  
Research Centre ◽  
Commercial Application ◽  
New Materials ◽  
Materials Development ◽  
Early Integration ◽  
Development Processes

The process of new materials development traditionally employs science and engineering based inquiry in the initial phases. This paper explores how product design can help determine the feasibility of new materials for commercial application earlier and provide benefits of reduced timeframes, cost and risk factors. It discusses a case study of new materials development based on Microwave Modified Timber Technology, set in the context of an Australian Collaborative Research Centre (CRC) for Wood Innovations. The study supports benefits in early integration of product design research into new materials development processes.

scholarly journals Brazilian National Solid Waste Policy Applied As a Tool to Enhance an University Campus Waste Management

2017 ◽  
Vol 7 (3) ◽  
pp. 101
Author(s):  
Rodrigo Martins Moreira ◽  
Tiago Balieiro Cetrulo ◽  
Alejandra Daniela Mendizabal-Cortes ◽  
Natalia Molina Cetrulo ◽  
Tadeu Fabrício Malheiros
Keyword(s):  
Waste Management ◽  
Solid Waste ◽  
Solid Waste Management ◽  
National Policy ◽  
Sao Paulo ◽  
São Paulo ◽  
Structured Interviews ◽  
Ex Post ◽  
Waste Policy ◽  
The University

The aim of this work is to discuss the Brazilian National Solid Waste Policy potential to enhance Brazilian universities waste management by analyzing the University of São Paulo, Campus of São context in accordance with the national policy requirements. Universities in Brazil lack a legal instrument to strengthen its waste management, which brings this paper innovation by applying the Brazilian waste policy as a standardization instrument to adapt waste management at Brazilian higher education institutions. The research used a descriptive and qualitative approach, data were collected from literature review, university documents and semi structured interviews, a case study approach is used to analyze the campus solid waste management activities, procedures and operations inherent the. The main findings conclude that University of São Paulo waste policy is being deployed, based on Brazilian Solid Waste National Policy requirements, confirming it translation into a potential framework tool to support decision making for adequacy of environmentally sound management of Brazilian. Further studies are required ex-post the policy enactment to assess the impacts of the waste policy at the university impacts.

Some aspects of the idea of unity V. Solovyov and the present

2000 ◽  
pp. 20-25
Author(s):  
O. O. Romanovsky
Keyword(s):  
Nineteenth Century ◽  
National Policy ◽  
The State ◽  
Place Of Residence ◽  
The Government ◽  
The University ◽  
Temporary Closure

In the second half of the nineteenth century, the nature of the national policy of Russia is significantly changing. After the events of 1863 in Poland (the Second Polish uprising), the government of Alexander II gradually abandoned the dominant idea of ​​anathematizing, whose essence is expressed in the domination of the principle of serving the state, the greatness of the empire. The tsar-reformer deliberately changes the policy of etatamism into the policy of state ethnocentrism. The manifestation of such a change is a ban on teaching in Polish (1869) and the temporary closure of the University of Warsaw. At the end of the 60s, the state's policy towards a five million Russian Jewry was radically revised. The process of abolition of restrictions on travel, education, place of residence initiated by Nicholas I, was provided reverse.

Towards an interdisciplinary knowledge exchange model

2019 ◽  
Vol 2 (1) ◽  
Author(s):  
Santiago DE FRANCISCO ◽  
Diego MAZO
Keyword(s):  
Design Research ◽  
Knowledge Exchange ◽  
Academic Research ◽  
Innovation Process ◽  
The United States ◽  
Design Environment ◽  
Interdisciplinary Knowledge ◽  
One Year ◽  
The University ◽  
Common Situation

Universities and corporates, in Europe and the United States, have come to a win-win relationship to accomplish goals that serve research and industry. However, this is not a common situation in Latin America. Knowledge exchange and the co-creation of new projects by applying academic research to solve company problems does not happen naturally.To bridge this gap, the Design School of Universidad de los Andes, together with Avianca, are exploring new formats to understand the knowledge transfer impact in an open innovation network aiming to create fluid channels between different stakeholders. The primary goal was to help Avianca to strengthen their innovation department by apply design methodologies. First, allowing design students to proposed novel solutions for the traveller experience. Then, engaging Avianca employees to learn the design process. These explorations gave the opportunity to the university to apply design research and academic findings in a professional and commercial environment.After one year of collaboration and ten prototypes tested at the airport, we can say that Avianca’s innovation mindset has evolved by implementing a user-centric perspective in the customer experience touch points, building prototypes and quickly iterate. Furthermore, this partnership helped Avianca’s employees to experience a design environment in which they were actively interacting in the innovation process.

Implantação do aterro sanitário no município de Marituba-PA e os efeitos sobre as comunidades do entorno

2020 ◽  
Author(s):  
Moisés Rita Vasconcelos Júnior
Keyword(s):  
Solid Waste ◽  
Environmental Impacts ◽  
Urban Policy ◽  
National Policy ◽  
Policy Instruments ◽  
Social Impacts ◽  
Point Of View ◽  
Metropolitan Region ◽  
Technical Standards ◽  
Non Governmental Organizations

The municipality of Marituba, Metropolitan Region of Belém - RMB, has suffered environmental impacts due to irregularities in the landfill operation implemented in 2015, which triggered social impacts perceived by all the population, including neighboring municipalities, such as Ananindeua and Belém Protests were carried out by the Movement Outside the Garbage that is constituted by the dwellings of the surrounding neighborhoods to the place where the embankment is located, of owners of commercial activities linked to the tourism and Non Governmental Organizations that interrupted several times the transit of the main route that interconnects the seven municipalities of the RMB and the entrance of the embankment, in order to draw the attention of the municipal public power to the problems that the population would have been facing ever since. From this, the following questions arose: What social impacts would people be making in these protests? Would such problems be directly related to the activities carried out in the landfill? And finally, what are the actions of the public authority and the company that manages the enterprise in the management of these social impacts? The relevance of this study concerns not only the identification of social impacts considering the fragility of this approach in the Environmental Impact Studies and concomitantly in the Reports of Environmental Impacts, but also, from the point of view of the debate about the licensing process of enterprises of this nature and employment and the need for the joint use of environmental and urban policy instruments, considering that RMB municipalities have not yet used sustainable alternatives for the reduction of solid waste produced in their territories, as well as the reduction of environmental impacts caused by dumps , and in the case of Marituba, of the landfill that operates outside the standards established by the Brazilian Association of Technical Standards - ABNT, which is responsible for the management and treatment of solid waste and the National Policy on Solid Waste - PNRSN.

scholarly journals Sustainable Tourism Product Development: An Application of Product Design Concepts

2021 ◽  
Vol 13 (14) ◽  
pp. 7957
Author(s):  
Marco Haid ◽  
Julia N. Albrecht
Keyword(s):  
Product Design ◽  
Sustainable Tourism ◽  
Sustainable Product Design ◽  
Structured Interviews ◽  
Design Concepts ◽  
Design For Sustainability ◽  
Tourism Product ◽  
German Speaking ◽  
Multiple Characteristics ◽  
Sustainable Product

This study examines sustainable tourism products in tourism destinations. Based on concepts of sustainable product design, our study proposes a framework for sustainable tourism products by adapting an existing Design for Sustainability Framework to consider and analyze the characteristics and themes of sustainable (tourism) products as well as their impact and scope. Using a pragmatic qualitative approach, 15 semi-structured interviews with destination managers from the German-speaking Alpine region formed the empirical basis of the study. The results emphasize key themes and multiple characteristics associated with sustainable tourism products in tourist destinations, addressing all sustainability components and design innovation levels. This study is the first to apply existing sustainable product design concepts to destination contexts and discuss their applicability for sustainable tourism products. For practitioners, this study provides support for the development of sustainable tourism products and contributes to a better understanding of the effects and levels of these products as well as sustainability marketing.

scholarly journals Up Close: Center for Advanced Materials at Lawrence Berkeley Laboratory

MRS Bulletin ◽  
1986 ◽  
Vol 11 (4) ◽  
pp. 27-27 ◽  
Author(s):  
John J. Gilman
Keyword(s):  
Materials Science ◽  
Magnetic Moments ◽  
National Laboratory ◽  
National Policy ◽  
Chemical Properties ◽  
Educational Process ◽  
University Of California ◽  
Advanced Materials ◽  
Lawrence Berkeley Laboratory ◽  
The University

The boundaries between the present performance of materials and the requirements of device designers have for centuries been moving forward. The steps taken to draw these two together are sometimes large; more often they are small. As they occur, we find materials that are stronger, have larger magnetic moments, have higher electron mobilities, etc. Each time the property profile improves, understanding of the physical and chemical properties advances, and new engineering devices based on the improved profile are invented and developed.The purpose of the Center for Advanced Materials (CAM) at the Lawrence Berkeley Laboratory (LBL) is to enhance the inter-play between advances in the property profiles of materials and advances in the chemical and physical understanding of them. For this purpose, the location of CAM can be described as ideal. The proximity of this national laboratory to the campus of the University of California at Berkeley provides an unusually rich intellectual setting for the Center. It also provides unique opportunities for the University students and faculty who conduct materials-related research. Indeed, the arrangement should be a model for similar organizations, and it represents a solid method for strengthening materials science and technology throughout the nation.National policy in critical materials has given the national laboratories—including LBL—strong direction and incentive to collaborate with industry and the research universities. This incentive led to the establishment of CAM in order to build on the symbiosis between LBL and the University of California at Berkeley. It strives to extend this symbiosis by bringing industry into the ongoing educational process and by making its special facilities more readily available to industrial researchers.

Concrete Production of Hot Asphalt Using Recycled Aggregates CDW

2016 ◽  
Vol 881 ◽  
pp. 346-350 ◽  
Author(s):  
Luzana Leite Brasileiro ◽  
Fátima Maria de Souza Pereira ◽  
Pablo de Abreu Vieira ◽  
José Milton Elias de Matos
Keyword(s):  
Solid Waste ◽  
National Policy ◽  
Mechanical Tests ◽  
Construction And Demolition Waste ◽  
Recycled Aggregate ◽  
Recycled Aggregates ◽  
Demolition Waste ◽  
Final Destination ◽  
Natural Aggregate ◽  
Concrete Production

Every year, there is a considerable increase in the exploitation of deposits to supply the market for aggregates. On the other hand, so does the production of solid waste from construction and demolition waste (CDW). In 2010 Brazil approved the PNRS (National Policy on Solid Waste), which sets out how the country should have their waste, encouraging recycling and sustainability. As an alternative to the above problem, this paper aims to investigate the feasibility of partial and total replacement of the asphalt concrete aggregates by recycled aggregates from CDW in order to reduce the environmental impacts caused by the operation of quarries and give an adequate final destination the residue produced by man in construction. Were carried out five (05) projects mixture of: the first (parameter of our research) used only natural aggregates (0% CDW) in the second, third and fourth replaced 25%, 50% and 75% respectively of natural aggregate by the recycled aggregate and the fifth and last, used only recycled aggregates (100% CDW). They carried out the characterization of the aggregates by means of physico-chemical and mechanical, analyzing them with reference based on specific standards paving. For mixtures, they calculated the volumetric parameters and performed mechanical tests of tensile strength and stability. The results indicate that the recycled aggregate, in a defined proportion, can replace the natural aggregate in the flexible pavements

What Can We Learn From Trustworthy Data? An Interview With John Wills Lloyd

2020 ◽  
pp. 105345122096310
Author(s):  
Kristin L. Sayeski
Keyword(s):  
Learning Disabilities ◽  
Best Practice ◽  
Design Research ◽  
Single Case ◽  
Professional Organizations ◽  
Professor Emeritus ◽  
University Of Virginia ◽  
Single Case Design ◽  
Design Research Methodology ◽  
The University

John Wills Lloyd is Professor Emeritus at the University of Virginia and co-editor of Exceptional Children. He earned his PhD from the University of Oregon and spent most of his career at the University of Virginia. Dr. Lloyd has been an integral part of many professional organizations, including the Council for Exceptional Children’s Division for Learning Disabilities, where he served as president and later as the executive director, and the Division for Research. Dr. Lloyd’s work has focused on the identification of effective instructional practices, best-practice in single-case design research methodology, and facilitating a deeper understanding of learning disabilities. He has produced numerous scholarly articles, foundational textbooks, and web-based materials that continue to inform readers about effective practice in special education.

ADHD, Self-Harm, and the Importance of Early Childhood Intervention - In Conversation with Dr. Melissa Mulraney

2021 ◽  
Keyword(s):  
Child Mental Health ◽  
Associate Editor ◽  
Mental Health Research ◽  
Social Neuroscience ◽  
Early Childhood Intervention ◽  
Research Centre ◽  
Senior Lecturer ◽  
Childhood Intervention ◽  
Self Harm ◽  
The University

In this podcast, we talk to Dr. Melissa Mulraney, Senior Lecturer and co-leader of the Child Mental Health Research Centre at the Institute for Social Neuroscience in Melbourne, Australia, Honorary Research Fellow at the Murdoch Children's Research Institute in the Department of Paediatrics at the University of Melbourne, and Associate Editor of CAMH.

Sign in / Sign up

Export Citation Format

Share Document