Toward standards in practices and techniques on ootaxonomy in the Pieridae (Lepidoptera: Papilionoidea)

Zootaxa ◽  
2021 ◽  
Vol 4985 (3) ◽  
Author(s):  
SANDRA NIEVES-URIBE ◽  
JORGE LLORENTE-BOUSQUETS ◽  
ADRIÁN FLORES-GALLARDO

We present a proposal on the standards used on ootaxonomy practices and techniques in the butterfly family Pieridae Duponchel (Lepidoptera: Papilionoidea) in five stages: 1) getting the specimens, 2) integration into a collection, 3) dissections to recover the exochorion, 4) elaboration of images of it, and 5) the preparation of its description with the necessary diagrams and tabulations. Also, we present the detailed techniques applied in observation and graphic representation, based on the methylene blue staining techniques and those required for the use with the scanning electron microscope (SEM). We compare the result of the standardized techniques with those from macro photography, drawings, and photographs with SEM—all of them found in books with descriptions and images of eggs of the Pieridae. We present a glossary and general aspects of the exochorion in the Pieridae as an Appendix to this article. Standardized techniques show more accurate and extensive character retrieval for systematics. For the scale in which they work, these techniques recovered more information than those present from oviposited eggs, where the exochorionic base is not seen. Also, the descriptions contain detailed data on more structures—which are comparable to each other—than are absent in the references mentioned. We present the recovered characters with the techniques found in the literature as three synthetically supplementary materials.

1989 ◽  
Vol 67 (6) ◽  
pp. 1739-1743 ◽  
Author(s):  
W. A. Charlton ◽  
A. D. Macdonald ◽  
U. Posluszny ◽  
C. P. Wilkins

Various staining techniques for apices destined for epi-illumination light microscopy are described and discussed. Appropriate modifications to photographic procedures are described. A technique is described for the subsequent observation of specimens in a scanning electron microscope fitted with a cryo-stage.


2020 ◽  
Vol 12 (1) ◽  
Author(s):  
Suaib Suaib ◽  
Henry Aritonang ◽  
Harry S. J. Koleangan

ABSTRAKTelah dilakukan penelitian tentang kemampuan fotokatalis nanopartikel CoFe2O4 dalam mendegradasi zat warna sintetik Methylene Blue (MB) menggunakan metode kopresipitasi. Nanopartikel tersebut dikarakterisasi menggunakan X-Ray Diffractometry (XRD), Scanning Electron Microscope (SEM) dan spektroskopi UV-vis. Kemampuan fotokatalis dilakukan melalui penentuan konsentrasi Methylene Blue yang tersisa setelah waktu kontak nanopartikel CoFe2O4 dengan larutan Methylene Blue 5 ppm yang disinari sinar UV-A selama 30, 45, 60, 90 dan 120 menit.  Penentuan konsentrasi dihitung berdasarkan absorbansi yang didapatkan dari hasil pembacaan uji Spektrofotometri UV-vis lalu digunakan rumus menghitung % degradasi. Hasil penelitian menunjukkan bahwa kemampuan fotokatalis paling baik adalah nanopartikel CoFe2O4 dengan nilai % degradasi untuk variasi waktu penyinaran 60 menit adalah sebesar 40,72 %. ABSTRACTA research on the ability of CoFe2O4 nanoparticles degradation of as photocatalyst to dyemethylene Blue(MB) synthetic using coprecipitation method. The nanoparticles were characterized using X-ray diffractometry (XRD), Scanning Electron Microscope (SEM) and UV-Vis spectroscopy. The ability of the photocatalyst is done by determining the concentration of Methylene Blue residu after contact time of CoFe2O4 nanoparticleswith a solution of Methylene Blue 5 ppm irradiated UV-A for 30, 45, 60, 90 and 120 minutes. Determining the concentration is calculated based on the absorbance obtained from the results of analysis UV-vis spectrophotometry and then used a formula calculating the% degradation. The results showed that ability is the best photocatalyst CoFe2O4 nanoparticles with the value of% degradation for variations in exposure time of 60 minutes is equal to 40.72 %. 


Author(s):  
Hanh

In this work, the hydrothermal growth of ZnO nanorods (NRs) on plastic PVC substrate is presented. It was shown that ZnO NRs with high density and high crystallinity can be successfully grown by implementing saturated nutrition solution of zinc nitrate hexahydrate (Zn[NO3]2·6H2O) and hexamethylenetetramine (C6H12N4) without the assistance of a seed layer. The morphologies of the ZnO nanorods investigated by scanning electron microscope (SEM) demonstrated hexagonal structures. The crystallinity of the ZnO NRs was studied by photoluminescence (PL) spectroscopy. The as-grown ZnO NRs were then utilized for photocatalytic degradation of methylene blue.


2019 ◽  
Vol 9 (7) ◽  
pp. 813-820
Author(s):  
Junxia Zhang ◽  
Zehua Wang ◽  
Binwu Wang ◽  
Xiaopeng Song

An experimental method was applied to prepare nanographene, in which its surface feature was analyzed using scanning electron microscope and Fourier infrared ray analyzer. A methylene blue (MB) solution was adopted to measure the molecule adsorption of nanographene and graphite and demonstrated that nanographene had more molecule adsorption than that by graphite. As the concentration of MB solution increased, the molecule adsorption of nanographene ascended. As the stirring time of a magnetic stirrer decreased, the molecule adsorption of nanographene in the MB solution increased significantly. Meanwhile, the increment in the absorption amount of graphite reduced. As the dosage of nanographene and graphite increased, the absorption capacity of nanographene reached a peak value of 40 mg, which was two- or threefold higher than that of graphite. Hence, nanographene has higher molecule adsorption capacity than graphite.


In this scenario, the photocatalyst Ag/Nd2O3-ZnO (ANZ) are prepared under hydrothermal method and the complete build was confirmed by X-ray diffractometer, Scanning electron microscope with EDX spectroscopy. From the results, the crystalline structure was confirmed by PXRD spectroscopy. And in the SEM, spherical with sponge-like clustered morphology structure was shown and the presenting elements are confirmed by EDX spectroscopy. The suitable light needed for the degradation was selected by DRS-UV spectroscopy. The dye Methylene blue (MB) is degraded under visible light within 30 minutes with the efficiency of 98.12%. The catalyst is further analysed optimized concentration, different catalyst loading, and the catalyst efficiency was analyzed by reusability study. From the recyclability, the catalyst is stable up to the fifth run. Besides, the photocatalytic study the catalyst is analysed antibacterial activity. For the results, the Bacillus bacteria having more antibacterial activity compared to E.coli bacteria.


1987 ◽  
Vol 65 (5) ◽  
pp. 888-892 ◽  
Author(s):  
J. A. Traquair

The scanning electron microscope and a backscattered electron detector were used for the first time to identify calcium oxalate in leaf tissues after labelling crystals with silver. Freehand sections fixed in formalin – acetic acid – alcohol or glutaraldehyde were treated with 5% acetic acid to remove background calcium carbonate and calcium phosphate and were silver stained by calcium-substitution techniques. Two standard staining techniques, Pizzolato (AgNO3–H2O2) and Yasue (AgNO3 – rubeanic acid) tests, were compared. Druses and raphides were identified morphologically and histochemically in the leaves of Anthurium scherzeranum and Dieffenbachia maculata. The Pizzolato procedure was the best method for staining calcium oxalate for scanning electron microscope studies. Excessive deposition of granular material in the Yasue staining method tended to obscure crystal morphology in scanning electron microscope preparations.


1989 ◽  
Vol 4 ◽  
pp. 351-355
Author(s):  
Walter C. Sweet

In the last two decades, scanning electron miocroscopy has come to be the technique of choice in studies of microfossil structure and morphology. Scanning electron microscope (SEM) photomicrographs are easy to produce, have great depth of field, and resolve minute details over a wide range of magnifications. Hence photomicrographs of images produced in a SEM are now more widely used than ordinary photographs in the illustration of microfossils. Techniques for preparation, mounting and manipulation of specimens in the SEM vary with the instrument available, aims of the study, and skill of the operator. Hence attention is directed here primarily to general aspects of SEM technique.


2020 ◽  
Vol 12 (2) ◽  
Author(s):  
David Tjiang ◽  
Henry F. Aritonang ◽  
Harry S. J. Koleangan

ABSTRAKTelah dilakukan penelitian tentang kemampuan fotodegradasi zat warna sintetik Methylene Blue dengan menggunakan nanopartikel Ag/CoFe2O4 dengan variasi perbandingan mol AgNO3:(Co(NO3)2.6H2O): (Fe(NO3)3.9H2O)= 0,3:0,7:2 dan jumlah ekstrak daun binahong (Anredera cordifolia (Ten) Steenis) yang ditambahkan 10 mL. Material tersebut dikarakterisasi menggunakan X-Ray Diffractometry (XRD), Scanning Electron Microscope (SEM) dan spektroskopi UV-vis. Kemampuan fotodegradasi dilakukan melalui penentuan konsentrasi Methylene Blue (konsentrasi awal 5 ppm) yang tersisa setelah berinteraksi dengan nanopartikel Ag/CoFe2O4 yang disinari sinar UV-A selama 30, 60, 120 dan 150 menit. Penentuan konsentrasi dihitung berdasarkan absorbansi yang didapatkan dari hasil pembacaan uji Spektrofotometri UV-vis, lalu digunakan rumus menghitung persen degradasi. Hasil penelitian menunjukkan bahwa yang memiliki kemampuan fotodegradasi paling baik adalah nanopartikel Ag/CoFe2O4 (0,3 : 0,7 : 2) mol dengan waktu kontak 120 menit, yaitu dengan nilai persen degradasi sebesar 44,84 %. ABSTRACTA research on photodegradation ability Methylene Blue dye synthetic by using Ag/CoFe2O4 nanoparticles with a mole ratio variation AgNO3 : (Co(NO3)2.6H2O) : (Fe(NO3)3.9H2O)= 0,3:0,7:2 and the amount of binahong (Anredera cordifolia (Ten) Steenis) leaf extract added 10 mL. These materials were characterized using X-Ray Diffractometry (XRD), Scanning Electron Microscope (SEM) and UV-vis Spectroscopy. Ability photodegradation done by determining the concentration of Methylene Blue is residue after the interaction with Ag/CoFe2O4 nanoparticles with irradiated UV-A for 30, 60, 120 and 150 minutes. Determining the concentration is calculated based on the absorbance obtained from the results of the analysis of UV-vis Spectrophotometry and then used a formula calculating the percent degradation. The results showed that the ability is best photodegradation Ag/CoFe2O4 nanoparticles (0,3: 0,7: 2) moles with a contact time of 120 minutes with a degradation value of 44.84%.


2011 ◽  
Vol 233-235 ◽  
pp. 623-626 ◽  
Author(s):  
Ling Xin ◽  
Bo Liu ◽  
Jiu Hong Ai ◽  
Jian Cheng Deng

Novel netlike nano-TiO2 was successfully prepared using polylatic acid (PLA) as a new template, and in particular, it was recyclable as photocatalyst. The products obtained at various temperatures were characterized by scanning electron microscope (SEM), transmission electron microscope (TEM) and powder X-ray diffraction (XRD). Besides, the products have an excellent photocatalysis to methyl orange (MO) and methylene blue (MB).


Sign in / Sign up

Export Citation Format

Share Document