Description of the larva of Argia cuprea (Hagen, 1861) with notes on its phylogenetic affinities (Odonata: Coenagrionidae)

Zootaxa ◽  
2021 ◽  
Vol 5057 (3) ◽  
pp. 137-145
Author(s):  
RODOLFO NOVELO-GUTIÉRREZ ◽  
JOSÉ ANTONIO GÓMEZ-ANAYA
Keyword(s):  
Lateral Surface ◽  
Ventral Margin ◽  
Total Length ◽  
Phylogenetic Affinities

The larva of Argia cuprea (Hagen, 1861) is described and figured. It falls into the group of Argia larvae with prominent ligula and one palpal seta, but it differs from its closest relatives by a combination of features such as male gonapophyses reaching posterior ventral margin of S10; dorsal and ventral margin of paraproct with long, abundant, white, delicate setae on distal 0.40; tip of paraproct 20% its total length; lateral surface of paraproct with abundant spiniform setae restricted to the triangular, yellowish-brown, slightly sclerotized area along the inflated area. It appears closely related to A. oenea Hagen in Selys, 1865 and A. orichalcea Hagen in Selys, 1865 larvae.  

Early tetrapod jaws from the Late Devonian of Pennsylvania, USA

2000 ◽  
Vol 74 (2) ◽  
pp. 301-308 ◽  
Author(s):  
Edward B. Daeschler
Keyword(s):  
Lateral Surface ◽  
New Genus ◽  
Morphological Diversity ◽  
Late Devonian ◽  
New Taxon ◽  
Ventral Margin ◽  
New Genus And Species ◽  
Lower Jaw ◽  
Phylogenetic Resolution ◽  
Early Tetrapods

Recent paleontological fieldwork in the Upper Devonian Catskill Formation at Red Hill in Clinton County, Pennsylvania, USA, has produced a diverse assemblage of vertebrate fossils including early tetrapods. The tetrapod Hynerpeton bassetti was described from the site in 1994 and a recently recognized partial lower jaw of that taxon is described here. Additionally, this paper describes a new Late Devonian tetrapod, Densignathus rowei new genus and species, based on a well-preserved lower jaw. This new taxon is characterized by dramatic widening of the jaw anterior of the adductor fossa, a pronounced twist in the orientation of ventral margin of the jaw, an uninterrupted exposure of Meckelian bone on the mesial surface, and weakly-developed radiating ornament on the lateral surface of the infradentaries. Although phylogenetic resolution within stem tetrapods is lacking, Densignathus rowei, n. gen. and sp., informs several topics including the sequence of character acquisition in the lower jaw, morphological diversity, and paleoecology of the earliest tetrapods.

scholarly journals On a new species of Macrobrachium Spence Bate (Decapoda: Palaemonidae) from Ayeyarwady River, Myanmnar

2021 ◽  
Vol 13 (1) ◽  
pp. 17529-17536
Author(s):  
H.H.S. Myo ◽  
K.V. Jayachandran ◽  
K.L. Khin
Keyword(s):  
New Species ◽  
Maximum Size ◽  
Close Relation ◽  
Proximal Part ◽  
Distal Segment ◽  
Ventral Margin ◽  
Total Length ◽  
Wide Gap ◽  
A New Species ◽  
Antennular Peduncle

Macrobrachium myanmarum sp. nov. was found from near Min Kun (local name Min Gon) at Mandalay, Ayeyarwady (Irrawaddy) River (22.043N & 96.043E), Myanmar.  It is a small-sized prawn showing close relation with Arachnochium kulsiense (Jayachandran et al. 2007) and A. mirabile (Kemp 1917).  This species can at once be identified from both the species by the characters: medium-sized and highly-elevated and arched rostrum, extending as far as distal segment of antennular peduncle or behind, upper margin with 11–15 teeth of which three (rarely 4) teeth post-orbital; ventral margin without teeth (rarely one); second chelate legs unequal, right leg larger (sometimes left); major leg in which carpus with proximal part narrow and distal end broadened, subequal to merus, palm and fingers; propodus slightly more than the combined length of merus and carpus; fingers very slender, almost equal to palm, fixed finger a bit shorter than movable finger, cutting edges with 2–6 weak denticles at proximal cutting edges, distal denticle situated at about 1/3rd distance from base; ischium, merus, carpus, propodus, palm and dactylus in the ratio 9.62 : 19.25 : 24.06: 47.06 : 23.53 : 23.53, respectively (related to the total length of pereopod); minor leg with minute tubercles in larger specimens; ischium, merus, carpus, propodus, palm and fingers in the ratio 13.1 : 23.68 : 22.37 : 40.8 : 15.8 : 25.0, respectively (related to total length of pereopod); palm slightly swollen and shorter than fingers, fingers slender and curved with a wide gap when closed.  Maximum size recorded for the species is 56mm male and 44mm female.

Flagellar Attachment in Selected Trypanosomes

1973 ◽  
Vol 31 ◽  
pp. 496-497
Author(s):  
J. J. Paulin
Keyword(s):  
Cell Membrane ◽  
Lateral Surface ◽  
The Body ◽  
Flagellar Pocket ◽  
Integral Component ◽  
Free Flagellum ◽  
Flagellar Axoneme

Movement in epimastigote and trypomastigote stages of trypanosomes is accomplished by planar sinusoidal beating of the anteriorly directed flagellum and associated undulating membrane. The flagellum emerges from a bottle-shaped depression, the flagellar pocket, opening on the lateral surface of the cell. The limiting cell membrane envelopes not only the body of the trypanosome but is continuous with and insheathes the flagellar axoneme forming the undulating membrane. In some species a paraxial rod parallels the axoneme from its point of emergence at the flagellar pocket and is an integral component of the undulating membrane. A portion of the flagellum may extend beyond the anterior apex of the cell as a free flagellum; the length is variable in different species of trypanosomes.

OFFLINE YORÙBÁ HANDWRITTEN WORD RECOGNITION USING GEOMETRIC FEATURE EXTRACTION AND SUPPORT VECTOR MACHINE CLASSIFIER

2020 ◽  
Vol 5 (2) ◽  
pp. 504
Author(s):  
Matthias Omotayo Oladele ◽  
Temilola Morufat Adepoju ◽  
Olaide ` Abiodun Olatoke ◽  
Oluwaseun Adewale Ojo
Keyword(s):  
Support Vector Machine ◽  
Feature Extraction ◽  
Word Recognition ◽  
Support Vector Machine Classifier ◽  
Recognition Accuracy ◽  
Recognition System ◽  
Support Vector ◽  
Geometric Features ◽  
Total Length ◽  
Yoruba Language

Yorùbá language is one of the three main languages that is been spoken in Nigeria. It is a tonal language that carries an accent on the vowel alphabets. There are twenty-five (25) alphabets in Yorùbá language with one of the alphabets a digraph (GB). Due to the difficulty in typing handwritten Yorùbá documents, there is a need to develop a handwritten recognition system that can convert the handwritten texts to digital format. This study discusses the offline Yorùbá handwritten word recognition system (OYHWR) that recognizes Yorùbá uppercase alphabets. Handwritten characters and words were obtained from different writers using the paint application and M708 graphics tablets. The characters were used for training and the words were used for testing. Pre-processing was done on the images and the geometric features of the images were extracted using zoning and gradient-based feature extraction. Geometric features are the different line types that form a particular character such as the vertical, horizontal, and diagonal lines. The geometric features used are the number of horizontal lines, number of vertical lines, number of right diagonal lines, number of left diagonal lines, total length of all horizontal lines, total length of all vertical lines, total length of all right slanting lines, total length of all left-slanting lines and the area of the skeleton. The characters are divided into 9 zones and gradient feature extraction was used to extract the horizontal and vertical components and geometric features in each zone. The words were fed into the support vector machine classifier and the performance was evaluated based on recognition accuracy. Support vector machine is a two-class classifier, hence a multiclass SVM classifier least square support vector machine (LSSVM) was used for word recognition. The one vs one strategy and RBF kernel were used and the recognition accuracy obtained from the tested words ranges between 66.7%, 83.3%, 85.7%, 87.5%, and 100%. The low recognition rate for some of the words could be as a result of the similarity in the extracted features.

Analysis of compliance of box sizes to comfortable housing of highly productive cows

2020 ◽  
pp. 42-50
Author(s):  
V. Turlyun
Keyword(s):  
Free Movement ◽  
Research Results ◽  
Total Length ◽  
Genetic Potential ◽  
Productive Potential ◽  
The Difference

The analysis of some herds of imported cattle under the conditions of Russian farms had been shown that the genetic potential of imported cattle in many farms has being realized only by 57 %, with the output of up to 50 % of the cattle during the first 2 years. The reason for this is the discrepancy between the conditions of the biological needs of animals. In this regard, the study of factors that affect the provision of comfortable conditions for animals plays an important role. This is especially true for Holstein animals, which are more susceptible to various diseases. In accordance with the technological solutions used in modern large complexes, the loose housing method of maintenance is mainly used. This method allows the animal to move freely, providing access to the consumption of water and feed, as well as timely rest. This determines the importance of the requirements for the size of the boxes for the rest of animals, which should ensure dryness and cleanliness in the process of resting cows, prevent damage to animals, as well as the ability of other animals to displace each other. The crossbars should not interfere with the free movement of the cow in the process of lowering to the floor and getting up due to their flexibility. The dimensions of the boxes should be made taking into account the measurements of the animals’ torso, as well as the amplitude of movement in the process of lowering and rising. The purpose of the research was to study the size of boxes and their compliance with the biological needs of highly productive imported cattle. An analysis of the compliance of conditions for housing highly productive cattle of Canadian and Australian origin with their biological needs under the conditions of a mega farm has been presented in the paper. Calculation on the basis of measurements of animals has been shown that animals of the Canadian selection require boxes with a total length of at least 279 cm, Australian – 271 cm. The difference with the required width of the box has been also established. For the group of cows of Canadian selection it should be at least 120 cm, for the Australian – 114 cm. Research results have been shown that the discrepancy in the design of boxes for comfortable rest of animals is a deterrent to the realization of their genetic productive potential.

scholarly journals Different characteristics of infants diagnosed with congenital choledochal malformation prenatally or postnatally

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Wei Chen ◽  
Jia Geng ◽  
Ya-lan Tan ◽  
Lian Zhao ◽  
Hui-hui Jia ◽  
...  
Keyword(s):  
Histopathological Examination ◽  
Fibrous Tissue ◽  
Operation Time ◽  
Normal Diet ◽  
Treatment Regimens ◽  
Total Length ◽  
Time Required ◽  
Different Characteristics ◽  
Length Of Hospitalization ◽  
Choledochal Malformation

AbstractThe general condition, clinical and pathological characteristics, and treatment regimens of patients prenatally and postnatally diagnosed with congenital choledochal malformation (CM) were analyzed in order to investigate the clinical significance of early diagnosis, treatment, and intervention in CM. We retrospectively analyzed 33 children who were admitted to the Children’s Hospital of Soochow University between 1 March 2010 and 31 May 2019, and their diagnosis of CM was confirmed by radiological, surgical and pathological findings. All the patients were under 36 months of age. The patients were divided into prenatally diagnosed and postnatally diagnosed groups. There were 16 and 17 CM patients in the prenatally and postnatally diagnosed groups, respectively, with a preponderance of females in both groups. Compared with the prenatally diagnosed group, the postnatally diagnosed group had a higher incidence of abdominal pain and vomiting (p < 0.05) and higher AST, GGT, and TB levels (p < 0.05). Although postoperative histopathological examination showed inflammation in both groups, congestion in the cyst walls and fibrous tissue hyperplasia were more significant in the postnatally diagnosed group (p < 0.05). In addition, operation time, length of time required to resume a normal diet after surgery, and total length of hospitalization differed between the 2 groups (p < 0.05), with the prenatally diagnosed group having a relatively longer operation time and taking longer to resume a normal diet after surgery. However, the total length of hospitalization in the prenatally diagnosed group was shorter than that in the postnatally diagnosed group. Compared with prenatally diagnosed CM patients, more symptoms, greater severity of symptoms, and more time to recovery after surgery were observed in postnatally diagnosed CM patients.

scholarly journals Evaluation of the Quality of Irrigation Machinery by Monitoring Changes in the Coefficients of Uniformity and Non-Uniformity of Irrigation

Agronomy ◽  
2021 ◽  
Vol 11 (8) ◽  
pp. 1499
Author(s):  
Ján Jobbágy ◽  
Peter Dančanin ◽  
Koloman Krištof ◽  
Juraj Maga ◽  
Vlastimil Slaný
Keyword(s):  
Repeated Measurements ◽  
Joint Stock Company ◽  
Stock Company ◽  
Uniformity Coefficient ◽  
Quality Of Work ◽  
Total Length ◽  
Irrigation Uniformity ◽  
Wide Range ◽  
The Impact

Recently, the development of agricultural technology has been focused on achieving higher reliability and quality of work. The aim of the presented paper was to examine the possibilities of evaluating the quality of work of wide-area irrigation machinery by monitoring the coefficients of uniformity and non-uniformity of irrigation. The object of the research was pivot irrigation machinery equipped with sprinklers with a total length from 230 to 540 m. The commonly applied quality of work parameter for wide-range irrigators is the irrigation uniformity coefficient according to Heermann and Hein CUH. Work quality evaluations were also carried out through other parameters applicable in practice, such as irrigation uniformity coefficients calculated according to Christiansen CU, Wilcox and Swailes Cws, and our introduced parameters, the coefficient ar (derived from the degree of unevenness according to Oehler) and the degree of uniformity γr (derived from the degree of non-uniformity according to Voight). Other applied parameters for determining the quality of work of wide-range irrigation machinery were the coefficients of irrigation uniformity according to Hart and Reynolds CUhr, further according to Criddle CUcr and subsequently according to Beale and Howell CUbr. Next, the parameters of the non-uniformity coefficient according to Oehler a, the coefficient of variation according to Stefanelli Cv, the degree of non-uniformity according to Voigt γ and the degree of non-uniformity according to Hofmeister Ef were evaluated. Field tests were performed during the growing season of cultivated crops (potatoes, corn and sugar beet) in the village of Trakovice (agricultural enterprise SLOV-MART, southwest of the Slovakia) and in the district of Piešťany (Agrobiop, joint stock company). During the research, the inlet operating parameters (speed stage, inlet pressure, irrigation dose), technical parameters (number of sprayers, total length, number of chassis) and weather conditions (wind speed and temperature) were recorded. The obtained results were examined by one-way ANOVA analysis depending on the observed coefficient or input conditions and subsequently verified by Tukey and Duncan tests as needed. Irrigation uniformity values ranged from 67.58% (Cws) to 95.88% (CUbh) depending on the input conditions. Irrigation non-uniformity values ranged from 8.58 (a, Ef) to 32.42% (Cv). The results indicate a statistically significant effect of the site of interest and thus the impact of particular field conditions (p < 0.05). When evaluating the application of different coefficients of irrigation uniformity, the results showed a statistically significant effect only in the first test (p = 0.03, p < 0.05). During further repeated measurements, the quality of work increased due to the performed inspection of all sprayers and the reduction in the influence of the wind.

Sign in / Sign up

Export Citation Format

Share Document