Ophthalmic Delivery of Riboflavin Loaded Nanoparticulate Suspension in Keratoconus: A Preclinical Study in Rabbit Model

2021 ◽  
Vol 17 (9) ◽  
pp. 1866-1873
Author(s):  
Ling Zhang ◽  
Chunlai Fang ◽  
Qiong Wu
Keyword(s):  
Spherical Surface ◽  
Rabbit Model ◽  
Preclinical Study ◽  
Solvent Evaporation Method ◽  
Experimental Animals ◽  
Ophthalmic Administration ◽  
Draize Test ◽  
Ophthalmic Delivery ◽  
Probe Sonication

The present investigation undertakes the formulation of nanoparticulate suspension of Riboflavin to treat keratoconus disease by applying it to the infected mice corneas. The nanoparticles of Riboflavin were prepared using single solvent evaporation method and later formulated as suspension using continuous probe sonication method. Then, both riboflavin nanoparticles and suspension were evaluated for various parameters. The nanoparticles showed smooth and spherical surface with in vitro drug release up to 77.89%. The drug content was found to be 97.23%–98.89%. The suspension was found to be visually clear with pH ranging from 6 to 7. The drug entrapment was found to be from 76.37% to 97.34%. Since there was no hemolytic activity, this formulation was suitable for ophthalmic administration. The Draize test confirmed the non-irritant, non-itchy nature of formulation. The prepared formulations, such as nanoparticulate gel and suspension, were found to be significantly efficacious in experimental animals.

scholarly journals Development of Triamcinolone Acetonide-Loaded Microemulsion as a Prospective Ophthalmic Delivery System for Treatment of Uveitis: In Vitro and In Vivo Evaluation

Pharmaceutics ◽  
2021 ◽  
Vol 13 (4) ◽  
pp. 444
Author(s):  
Alaa Mahran ◽  
Sayed Ismail ◽  
Ayat A. Allam
Keyword(s):  
Triamcinolone Acetonide ◽  
Delivery System ◽  
Histopathological Examination ◽  
Rabbit Model ◽  
Subconjunctival Injection ◽  
In Vivo Evaluation ◽  
Ternary Phase Diagrams ◽  
Ophthalmic Delivery

Treatment of uveitis (i.e., inflammation of the uvea) is challenging due to lack of convenient ophthalmic dosage forms. This work is aimed to determine the efficiency of triamcinolone acetonide (TA)-loaded microemulsion as an ophthalmic delivery system for the treatment of uveitis. Water titration method was used to construct different pseudo-ternary phase diagrams. Twelve microemulsion formulations were prepared using oleic acid, Cremophor EL, and propylene glycol. Among all tested formulations, Formulation F3, composed of oil: surfactant-co-surfactant (1:1): water (15:35:50% w/w, respectively), was found to be stable and showed acceptable pH, viscosity, conductivity, droplet size (211 ± 1.4 nm), and zeta potential (−25 ± 1.7 mV) and almost complete in vitro drug release within 24 h. The in vivo performance of the optimized formulation was evaluated in experimentally uveitis-induced rabbit model and compared with a commercial TA suspension (i.e., Kenacort®-A) either topically or by subconjunctival injection. Ocular inflammation was evaluated by clinical examination, white blood cell count, protein content measurement, and histopathological examination. The developed TA-loaded microemulsion showed superior therapeutic efficiency in the treatment of uveitis with high patient compliance compared to commercial suspension. Hence, it could be considered as a potential ocular treatment option in controlling of uveitis.

Preparation and in vitro Evaluation of Bioadhesive Microparticulate System

1970 ◽  
Vol 1 (3) ◽  
pp. 257-266
Author(s):  
Nagda C. D. ◽  
Chotai N. P. ◽  
Patel S. B. ◽  
Soni T. J ◽  
Patel U. L
Keyword(s):  
Drug Loading ◽  
In Vitro Release ◽  
Phenyl Acetic Acid ◽  
Solvent Evaporation Method ◽  
Elimination Half ◽  
Release Studies ◽  
Differential Scanning Colorimetry ◽  
Polymer Interactions ◽  
Vitro Release

Aceclofenac (ACE) is NSAIDs of a phenyl acetic acid class. It is indicated in arthritis and osteoarthritis, rheumatoid arthritis, ankylosing spondylitis. It has short elimination half life of 4 hours. The objective of the study is to design, characterize and evaluate bioadhesive microspheres of ACE employing carbopol (CP) as bioadhesive polymer. Bioadhesive microspheres of ACE were prepared by solvent evaporation method. The prepared microspheres were free flowing and spherical in shape and characterized for drug loading, mucoadhesion test, infrared spectroscopy (IR), differential scanning colorimetry (DSC) and scanning electron microscopy (SEM). The in-vitro release studies were performed using pH 6.8 phosphate buffer. The drug loaded microspheres in a ratio of 1:5 showed 47% of drug entrapment; percentage mucoadhesion was 81% and 89% release in 10 h. The infrared spectra and DSC showed stable character of aceclofenac in the drug loaded microspheres and revealed the absence of drug-polymer interactions. SEM studies showed that the microspheres are spherical and porous in nature. The in vitro release profiles from microspheres of different polymer-drug ratios followed Higuchi model.

scholarly journals Pharmacodynamic, pharmacokinetic, and phase 1a study of bisthianostat, a novel histone deacetylase inhibitor, for the treatment of relapsed or refractory multiple myeloma

2021 ◽  
Author(s):  
Yu-bo Zhou ◽  
Yang-ming Zhang ◽  
Hong-hui Huang ◽  
Li-jing Shen ◽  
Xiao-feng Han ◽  
...  
Keyword(s):  
Multiple Myeloma ◽  
Drug Targets ◽  
Single Agent ◽  
Hdac Inhibitors ◽  
Preclinical Study ◽  
Parp Cleavage ◽  
Rpmi 8226 ◽  
Ongoing Phase

AbstractHDAC inhibitors (HDACis) have been intensively studied for their roles and potential as drug targets in T-cell lymphomas and other hematologic malignancies. Bisthianostat is a novel bisthiazole-based pan-HDACi evolved from natural HDACi largazole. Here, we report the preclinical study of bisthianostat alone and in combination with bortezomib in the treatment of multiple myeloma (MM), as well as preliminary first-in-human findings from an ongoing phase 1a study. Bisthianostat dose dependently induced acetylation of tubulin and H3 and increased PARP cleavage and apoptosis in RPMI-8226 cells. In RPMI-8226 and MM.1S cell xenograft mouse models, oral administration of bisthianostat (50, 75, 100 mg·kg-1·d-1, bid) for 18 days dose dependently inhibited tumor growth. Furthermore, bisthianostat in combination with bortezomib displayed synergistic antitumor effect against RPMI-8226 and MM.1S cell in vitro and in vivo. Preclinical pharmacokinetic study showed bisthianostat was quickly absorbed with moderate oral bioavailability (F% = 16.9%–35.5%). Bisthianostat tended to distribute in blood with Vss value of 0.31 L/kg. This distribution parameter might be beneficial to treat hematologic neoplasms such as MM with few side effects. In an ongoing phase 1a study, bisthianostat treatment was well tolerated and no grade 3/4 nonhematological adverse events (AEs) had occurred together with good pharmacokinetics profiles in eight patients with relapsed or refractory MM (R/R MM). The overall single-agent efficacy was modest, stable disease (SD) was identified in four (50%) patients at the end of first dosing cycle (day 28). These preliminary in-patient results suggest that bisthianostat is a promising HDACi drug with a comparable safety window in R/R MM, supporting for its further phase 1b clinical trial in combination with traditional MM therapies.

scholarly journals β-elemene alleviates airway stenosis via the ILK/Akt pathway modulated by MIR143HG sponging miR-1275

2021 ◽  
Vol 26 (1) ◽  
Author(s):  
Guoying Zhang ◽  
Cheng Xue ◽  
Yiming Zeng
Keyword(s):  
Cell Cycle ◽  
Cell Viability ◽  
Cell Model ◽  
Protective Efficacy ◽  
Rabbit Model ◽  
Akt Pathway ◽  
Loss Of Function ◽  
Airway Stenosis

Abstract Background We have previously found that β-elemene could inhibit the viability of airway granulation fibroblasts and prevent airway hyperplastic stenosis. This study aimed to elucidate the underlying mechanism and protective efficacy of β-elemene in vitro and in vivo. Methods Microarray and bioinformatic analysis were used to identify altered pathways related to cell viability in a β-elemene-treated primary cell model and to construct a β-elemene-altered ceRNA network modulating the target pathway. Loss of function and gain of function approaches were performed to examine the role of the ceRNA axis in β-elemene's regulation of the target pathway and cell viability. Additionally, in a β-elemene-treated rabbit model of airway stenosis, endoscopic and histological examinations were used to evaluate its therapeutic efficacy and further verify its mechanism of action. Results The hyperactive ILK/Akt pathway and dysregulated LncRNA-MIR143HG, which acted as a miR-1275 ceRNA to modulate ILK expression, were suppressed in β-elemene-treated airway granulation fibroblasts; β-elemene suppressed the ILK/Akt pathway via the MIR143HG/miR-1275/ILK axis. Additionally, the cell cycle and apoptotic phenotypes of granulation fibroblasts were altered, consistent with ILK/Akt pathway activity. In vivo application of β-elemene attenuated airway granulation hyperplasia and alleviated scar stricture, and histological detections suggested that β-elemene's effects on the MIR143HG/miR-1275/ILK axis and ILK/Akt pathway were in line with in vitro findings. Conclusions MIR143HG and ILK may act as ceRNA to sponge miR-1275. The MIR143HG/miR-1275/ILK axis mediates β-elemene-induced cell cycle arrest and apoptosis of airway granulation fibroblasts by modulating the ILK/Akt pathway, thereby inhibiting airway granulation proliferation and ultimately alleviating airway stenosis.

scholarly journals 64Cu-ATSM/64Cu-Cl2 and their relationship to hypoxia in glioblastoma: a preclinical study

2019 ◽  
Vol 9 (1) ◽  
Author(s):  
Elodie A. Pérès ◽  
Jérôme Toutain ◽  
Louis-Paul Paty ◽  
Didier Divoux ◽  
Méziane Ibazizène ◽  
...  
Keyword(s):  
Ex Vivo ◽  
In Vitro Study ◽  
Tumor Location ◽  
Preclinical Study ◽  
Significant Rise ◽  
Lower Oxygen ◽  
Cu Complexes ◽  
Ex Vivo Study

Abstract Background Diacetyl-bis(N4-methylthiosemicarbazone), labeled with 64Cu (64Cu-ATSM) has been suggested as a promising tracer for imaging hypoxia. However, various controversial studies highlighted potential pitfalls that may disable its use as a selective hypoxic marker. They also highlighted that the results may be tumor location dependent. Here, we first analyzed uptake of Cu-ATSM and its less lipophilic counterpart Cu-Cl2 in the tumor over time in an orthotopic glioblastoma model. An in vitro study was also conducted to investigate the hypoxia-dependent copper uptake in tumor cells. We then further performed a comprehensive ex vivo study to compare 64Cu uptake to hypoxic markers, specific cellular reactions, and also transporter expression. Methods μPET was performed 14 days (18F-FMISO), 15 days (64Cu-ATSM and 64Cu-Cl2), and 16 days (64Cu-ATSM and 64Cu-Cl2) after C6 cell inoculation. Thereafter, the brains were withdrawn for further autoradiography and immunohistochemistry. C6 cells were also grown in hypoxic workstation to analyze cellular uptake of Cu complexes in different oxygen levels. Results In vivo results showed that Cu-ASTM and Cu-Cl2 accumulated in hypoxic areas of the tumors. Cu-ATSM also stained, to a lesser extent, non-hypoxic regions, such as regions of astrogliosis, with high expression of copper transporters and in particular DMT-1 and CTR1, and also characterized by the expression of elevated astrogliosis. In vitro results show that 64Cu-ATSM showed an increase in the uptake only in severe hypoxia at 0.5 and 0.2% of oxygen while for 64Cu-Cl2, the cell retention was significantly increased at 5% and 1% of oxygen with no significant rise at lower oxygen percentages. Conclusion In the present study, we show that Cu-complexes undoubtedly accumulate in hypoxic areas of the tumors. This uptake may be the reflection of a direct dependency to a redox metabolism and also a reflection of hypoxic-induced overexpression of transporters. We also show that Cu-ATSM also stained non-hypoxic regions such as astrogliosis.

The Use of an Opacitometer to Compare the In Vitro Cornea Opacifying Effects of Timolol With and Without Benzalkonium Chloride

1991 ◽  
Vol 19 (2) ◽  
pp. 263-270
Author(s):  
Haruyoshi Igarashi ◽  
Yasunaga Katsuta ◽  
Yoshiharu Nakazato ◽  
Tohru Kawasaki
Keyword(s):  
Benzalkonium Chloride ◽  
Additive Effects ◽  
Timolol Maleate ◽  
Epithelial Surface ◽  
Endothelial Surface ◽  
Draize Test ◽  
Corneal Opacities

We have evaluated a new in vitro opacitometer method as an alternative to the in vivo Draize test for ocular irritancy. Several concentrations of timolol maleate (timolol) with or without 0.005% benzalkonium chloride were applied to porcine isolated corneas which were either intact or with the epithelium, endothelium, or both epithelium and endothelium removed. Corneal opacities were measured using an opacitometer. In general, timolol with benzalkonium chloride caused a greater degree of opacity to develop in the cornea than did timolol alone. At the lower concentrations of timolol, the increased opacity probably represented additive effects of the two compounds. However, at the highest concentration of timolol (5 x 10 2M), there was an enhanced opacification in the presence of benzalkonium chloride, which may have been due to an increase in penetration, particularly through the epithelium. Timolol caused a greater degree of opacity to develop in the isolated intact porcine corneas when the drug was applied to the endothelial surface, than when applied to the epithelial surface or to both the epithelial and endothelial surfaces. However, timolol with benzalkonium chloride caused a greater degree of opacity in the intact cornea, when the drug was applied to both surfaces than when it was applied only to the epithelial or the endothelial surface.

scholarly journals Melt-Cast Films Significantly Enhance Triamcinolone Acetonide Delivery to the Deeper Ocular Tissues

Pharmaceutics ◽  
2019 ◽  
Vol 11 (4) ◽  
pp. 158
Author(s):  
Akshaya Tatke ◽  
Narendar Dudhipala ◽  
Karthik Janga ◽  
Bhavik Soneta ◽  
Bharathi Avula ◽  
...  
Keyword(s):  
Triamcinolone Acetonide ◽  
Polymer Matrix ◽  
Rabbit Model ◽  
In Vivo Studies ◽  
Invasive Technique ◽  
Content Uniformity ◽  
Scanning Calorimetry ◽  
Ocular Tissues

Delivering an effective drug load to the posterior section of the ocular tissues, while using a non-invasive technique, has always been a challenge. In this regard, the goal of the present study was to develop sustained release triamcinolone acetonide (TA) loaded polymeric matrix films for ocular delivery. The TA-films were prepared in two different polymer matrices, with drug loadings of 10% and 20% w/w, and they were evaluated for ocular distribution in vivo in a conscious rabbit model. A 4% w/v TA suspension (TA-C) was used as a control for in vitro and in vivo studies. The TA-films, prepared with melt-cast technology, used polyethylene oxide (PEO) and Soluplus® as the polymer matrix. The films were evaluated with respect to assay, content uniformity, excipient interaction, and permeability across isolated rabbit sclera. The distribution of TA in the ocular tissues, post topical administration, was determined in New Zealand male albino rabbits as a function of dose, and was compared against TA-C. The assay of the 10% and 20% w/w film was in the range from 70–79% and 92–94% for the Soluplus® and PEO films, respectively, and content uniformity was in the range of 95–103% for both the films. The assay of the TA from Soluplus® films was less compared with the PEO films and showed an interaction with TA, as revealed by Differential Scanning Calorimetry (DSC). Hence, Soluplus® films were not selected for further studies. No interaction was observed between the drug and PEO polymer matrix. The enhancement of trans-scleral flux and permeability of TA was about 1.16 and 1.33-folds, respectively, from the 10% w/w PEO and 3.5 and 2.12-folds, respectively, from the 20% w/w PEO films, as compared with TA-C formulations. The in vivo studies demonstrate that significantly higher TA levels were observed in the anterior and posterior segments of the eye at the end of 6h with the PEO films. Therefore, the PEO based polymeric films were able to deliver TA into the back of the eye efficiently and for prolonged periods.

scholarly journals Comparison of Borate Bioactive Glass and Calcium Sulfate as Implants for the Local Delivery of Teicoplanin in the Treatment of Methicillin-Resistant Staphylococcus aureus-Induced Osteomyelitis in a Rabbit Model

2015 ◽  
Vol 59 (12) ◽  
pp. 7571-7580 ◽  
Author(s):  
Wei-Tao Jia ◽  
Qiang Fu ◽  
Wen-Hai Huang ◽  
Chang-Qing Zhang ◽  
Mohamed N. Rahaman
Keyword(s):  
Staphylococcus Aureus ◽  
Bioactive Glass ◽  
Calcium Sulfate ◽  
Rabbit Model ◽  
Local Delivery ◽  
Methicillin Resistant ◽  
Content Type ◽  
Borate Bioactive Glass ◽  
Phosphate Buffered Saline

ABSTRACTThere is growing interest in biomaterials that can cure bone infection and also regenerate bone. In this study, two groups of implants composed of 10% (wt/wt) teicoplanin (TEC)-loaded borate bioactive glass (designated TBG) or calcium sulfate (TCS) were created and evaluated for their ability to release TECin vitroand to cure methicillin-resistantStaphylococcus aureus(MRSA)-induced osteomyelitis in a rabbit model. When immersed in phosphate-buffered saline (PBS), both groups of implants provided a sustained release of TEC at a therapeutic level for up to 3 to 4 weeks while they were gradually degraded and converted to hydroxyapatite. The TBG implants showed a longer duration of TEC release and better retention of strength as a function of immersion time in PBS. Infected rabbit tibiae were treated by debridement, followed by implantation of TBG or TCS pellets or intravenous injection with TEC, or were left untreated. Evaluation at 6 weeks postimplantation showed that the animals implanted with TBG or TCS pellets had significantly lower radiological and histological scores, lower rates of MRSA-positive cultures, and lower bacterial loads than those preoperatively and those of animals treated intravenously. The level of bone regeneration was also higher in the defects treated with the TBG pellets. The results showed that local TEC delivery was more effective than intravenous administration for the treatment of MRSA-induced osteomyelitis. Borate glass has the advantages of better mechanical strength, more desirable kinetics of release of TEC, and a higher osteogenic capacity and thus could be an effective alternative to calcium sulfate for local delivery of TEC.

Sign in / Sign up

Export Citation Format

Share Document