Modeling and Estimation of Drain Current for Dual Metal Gate (Hf/AlNx) and Midgap Symmetric Double Gate (SDG) MOSFET

2010 ◽  
Vol 7 (10) ◽  
pp. 1941-1947
Author(s):  
S. K. Vishvakarma ◽  
A. K. Saxena ◽  
S. Dasgupta
2021 ◽  
pp. 421-429
Author(s):  
Achinta Baidya ◽  
Rajesh Saha ◽  
Amarnath Gaini ◽  
Chaitali Koley ◽  
Somen Debnath ◽  
...  

2006 ◽  
Vol 16 (01) ◽  
pp. 147-173
Author(s):  
YANGYUAN WANG ◽  
RU HUANG ◽  
JINFENG KANG ◽  
SHENGDONG ZHANG

In this paper field effect transistors (FETs) with new materials and new structures are discussed. A thermal robust HfN/HfO 2 gate stack, which can alleviate the confliction between high quality high k material and low EOT, is investigated. EOT of the gate stack can be scaled down to 0.65nm for MOS capacitor and 0.95nm for MOSFET with higher carrier mobility. A new dual metal gate/high k CMOS integration process was demonstrated based on a dummy HfN technique for better high k quality and metal gate integration. Several new double gate FETs are proposed and investigated, including vertical double gate device with an asymmetric graded lightly doped drain (AGLDD) for better short channel behavior, self-aligned electrically separable double gate device for dynamic threshold voltage operation, new 3-D CMOS inverter based on double gate structure and SOI substrate for compact configuration and new full-symmetric DGJFET for 10nm era with greatly relaxed requirement of silicon film thickness and device design simplification.


Author(s):  
K. E. Kaharudin ◽  
F. Salehuddin ◽  
A. S. M. Zain ◽  
Ameer F. Roslan

The junctionless MOSFET architectures appear to be attractive in realizing the Moore’s law prediction. In this paper, a comprehensive 2-D simulation on junctionless vertical double-gate MOSFET (JLDGVM) under geometric and process consideration was introduced in order to obtain excellent electrical characteristics. Geometrical designs such as channel length (Lch) and pillar thickness (Tp) were considered and the impact on the electrical performance was analyzed. The influence of doping concentration and metal gate work function (WF) were further investigated for achieving better performance. The results show that the shorter Lch can boost the drain current (ID) of n-JLDGVM and p-JLDGVM by approximately 68% and 70% respectively. The ID of the n-JLVDGM and p-JLVDGM could possibly boost up to 42% and 78% respectively as the Tp is scaled down from 11nm to 8nm. The channel doping (Nch) is also a critical parameter, affecting the electrical performance of both n-JLDGVM and p-JLDGVM in which 15% and 39% improvements are observed in their respective ID as the concentration level is increased from 1E18 to 9E18 atom/cm3. In addition, the adjustment of threshold voltage can be realized by varying the metal WF.


2021 ◽  
Author(s):  
Priyanka Karmakar ◽  
P K Sahu

Abstract A Silicon based Vertical Dual metal Double gate Tunnel FET (Si-VDMDGTFET) has been proposed and simulated in Sentaurus TCAD tool with improved DC and analog/RF characteristics. The vertical In-line tunneling dominates in the proposed device which results in better subthreshold slope (SS). The vertical in-line tunneling tunes the tunneling barrier and eventually controls the ON current. The dual metal gate and the heterogeneous gate stack oxide within the proposed device design gives the mouldability for controlling and improving the DC characteristics such as ON current, OFF current. The analog/RF behaviour of the proposed device has been calculated and compared with conventional lateral Silicon based dual metal double gate Tunnel FET furthermore it is seen that the proposed device outperforms the conventional lateral device.


2005 ◽  
Vol 8 (12) ◽  
pp. G333 ◽  
Author(s):  
Muhammad Mustafa Hussain ◽  
Naim Moumen ◽  
Joel Barnett ◽  
Jason Saulters ◽  
David Baker ◽  
...  

Sign in / Sign up

Export Citation Format

Share Document