Purification of Laser Synthesized SWCNTs by Different Methods: A Comparative Study

2008 ◽  
Vol 8 (11) ◽  
pp. 6023-6030
Author(s):  
Letlhogonolo Matlhoko ◽  
Sreejarani K. Pillai ◽  
Suprakas Sinha Ray ◽  
Willem G. Augustyn ◽  
Mathew Moodley
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Gas Phase ◽  
Single Walled Carbon Nanotubes ◽  
Transmission Electron ◽  
Phase Oxidation ◽  
Gas Phase Oxidation ◽  
Walled Carbon Nanotubes ◽  
Scanning Electron

A comparison of different purification procedures for single walled carbon nanotubes (SWCNTs) synthesized by laser-vapourization has been presented. The methods involved gas-phase oxidation by calcination, liquid-phase oxidation by H2O2, hydrothermal treatment and acid refluxing in HCl. Sample purity is documented with Raman spectroscopy, Transmission electron microscopy, Scanning electron microscopy and thermogravimetric analysis. Multi-spot analyses were done to check the homogeneity of the purified samples. Different purification processes produced SWCNT material with purity in the range of 48–78%. Raman and TEM results suggested that prolonged calcination results in selective etching of larger diameter nanotubes. SEM and TGA analyses showed increase in density of SWCNTs with better oxidation resistance after purification.

scholarly journals Boosting the Adhesivity of π-Conjugated Polymers by Embedding Platinum Acetylides towards High-Performance Thermoelectric Composites

Polymers ◽  
2019 ◽  
Vol 11 (4) ◽  
pp. 593 ◽  
Author(s):  
Tao Wan ◽  
Xiaojun Yin ◽  
Chengjun Pan ◽  
Danqing Liu ◽  
Xiaoyan Zhou ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Conjugated Polymers ◽  
High Performance ◽  
Single Walled Carbon Nanotubes ◽  
Strong Interactions ◽  
Transmission Electron ◽  
Higher Power ◽  
Walled Carbon Nanotubes ◽  
Scanning Electron

Single-walled carbon nanotubes (SWCNTs) incorporated with π-conjugated polymers, have proven to be an effective approach in the production of advanced thermoelectric composites. However, the studied polymers are mainly limited to scanty conventional conductive polymers, and their performances still remain to be improved. Herein, a new planar moiety of platinum acetylide in the π-conjugated system is introduced to enhance the intermolecular interaction with the SWCNTs via π–π and d–π interactions, which is crucial in regulating the thermoelectric performances of SWCNT-based composites. As expected, SWCNT composites based on the platinum acetylides embedded polymers displayed a higher power factor (130.7 ± 3.8 μW·m−1·K−2) at ambient temperature than those without platinum acetylides (59.5 ± 0.7 μW·m−1·K−2) under the same conditions. Moreover, the strong interactions between the platinum acetylide-based polymers and the SWCNTs are confirmed by scanning electron microscopy (SEM) and transmission electron microscopy (TEM) measurements.

Preparation of Single-Walled Carbon Nanotubes from Starch by Arc Discharge

2012 ◽  
Vol 454 ◽  
pp. 63-66
Author(s):  
Xia Yuan ◽  
Yu Liang An ◽  
Chen Zhang ◽  
Hong Chao Sui
Keyword(s):  
Electron Microscopy ◽  
Carbon Nanotubes ◽  
Scanning Electron Microscopy ◽  
Arc Discharge ◽  
Single Walled Carbon Nanotubes ◽  
Single Walled Carbon ◽  
Transmission Electron ◽  
Walled Carbon Nanotubes ◽  
Discharge Method ◽  
Scanning Electron

Single-walled carbon nanotubes (SWNTs) have been successfully prepared from starch by arc discharge technique. The SWNTs products were characterized by scanning electron microscopy, transmission electron microscopy and Raman spectroscopy. The growth mechanism of the SWNTs was discussed in terms of the starch. The results demonstrate that starch is one of the suitable precursor for making SWNTs by arc discharge method.

Investigation of Interfacial Interaction and Microstructure for Epoxy/CNTs Nanocomposites by PALS

2008 ◽  
Vol 607 ◽  
pp. 183-185
Author(s):  
Wei Zhou ◽  
Shao Jie Yue ◽  
Jun Jun Wang ◽  
Bo Wang ◽  
Ya Ping Zheng
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Interfacial Interaction ◽  
Glass Transition Temperatures ◽  
Transmission Electron ◽  
Multi Walled Carbon Nanotubes ◽  
Walled Carbon Nanotubes ◽  
Scanning Electron ◽  
Volume Size

Epoxy nanocomposites with multi-walled carbon nanotubes (MWNTs) were prepared. The interaction between MWNTs and epoxy matrix and microstructure were systematically investigated by transmission electron microscopy (TEM), scanning electron microscopy (SEM) and the positron annihilation technology (PAT) respectively. The glass transition temperatures were determined by the variation of the free volume size.

Fabrication of a vertically aligned carbon nanotube electrode and its modification by nanostructured MnO2 for supercapacitors

2009 ◽  
Vol 81 (12) ◽  
pp. 2317-2325 ◽  
Author(s):  
Wei-De Zhang ◽  
Jin Chen
Keyword(s):  
Electron Microscopy ◽  
Carbon Nanotubes ◽  
Scanning Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Room Temperature ◽  
Transmission Electron ◽  
Multi Walled Carbon Nanotubes ◽  
Vertically Aligned ◽  
Walled Carbon Nanotubes ◽  
Scanning Electron

Strongly bonded arrays of vertically aligned, multi-walled carbon nanotubes (MWNTs) have been successfully grown on Ta foils, and provide a convenient basis for fabricating electrodes with high conductivity and stability. The MWNT arrays were further coated by nanostructured MnO2 through reacting with KMnO4 solution at room temperature. The morphology of the MnO2/MWNT nanocomposite was characterized by scanning electron microscopy (SEM) and transmission electron microscopy (TEM). It was found that the MnO2 is a beehive-like nanostructure that is homogeneously and densely coated on the surface of the MWNTs. The capacitance of the MWNT electrode was significantly increased from 0.14 to 6.81 mF cm–2 after being modified with nanostructured MnO2, that is, the mass-specific capacitance of the bare and MnO2-modified MWNTs was about 33 and 446 F g–1, respectively. The MnO2/MWNT nanocomposite on Ta foils could be potential for developing a supercapacitor.

Single walled 0.4 nm carbon nanotube bundles prepared by pyrolysis of n-hexane catalyzed by ferrocene

2003 ◽  
Vol 772 ◽  
Author(s):  
Qixiang Wang ◽  
Guoqing Ning ◽  
Fei Wei ◽  
Guohua Luoa
Keyword(s):  
Electron Microscopy ◽  
Carbon Nanotubes ◽  
Scanning Electron Microscopy ◽  
Vapor Deposition ◽  
Chemical Vapor ◽  
Single Walled Carbon Nanotubes ◽  
Nanotube Bundles ◽  
Transmission Electron ◽  
Walled Carbon Nanotubes ◽  
Scanning Electron

AbstractBundles of single walled 0.4 nm carbon nanotubes were prepared by chemical vapor deposition using n-hexane as carbon source catalyzed by ferrocene with additives of thiophene at 1373 K. 8 cm long rope of single walled carbon nanotubes with diameters of 0.8-1.18 nm was also synthesized. The products were characterized by scanning electron microscopy, high resolution transmission electron microscopy and Raman spectroscopy.

Two- or three-way observations of the identical cell elements within the same sections by LM, TEM and/or SEM

1978 ◽  
Vol 36 (2) ◽  
pp. 82-83 ◽  
Author(s):  
Nakazo Watari ◽  
Yasuaki Hotta ◽  
Yoshio Mabuchi
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Fine Structure ◽  
Light Microscopy ◽  
Thin Sections ◽  
Transmission Electron ◽  
Identical Cell ◽  
Electron Microscopes ◽  
Scanning Electron

It is very useful if we can observe the identical cell elements within the same sections by light microscopy (LM), transmission electron microscopy (TEM) and/or scanning electron microscopy (SEM) sequentially, because, the cell fine structure can not be indicated by LM, while the color is; on the other hand, the cell fine structure can be very easily observed by EM, although its color properties may not. However, there is one problem in that LM requires thick sections of over 1 μm, while EM needs very thin sections of under 100 nm. Recently, we have developed a new method to observe the same cell elements within the same plastic sections using both light and transmission (conventional or high-voltage) electron microscopes.In this paper, we have developed two new observation methods for the identical cell elements within the same sections, both plastic-embedded and paraffin-embedded, using light microscopy, transmission electron microscopy and/or scanning electron microscopy (Fig. 1).

Comparative Study of the Fine Morphology of Sensory Receptors in Aspidogaster conchicola and Cotylaspis insignis

1972 ◽  
Vol 30 ◽  
pp. 150-151
Author(s):  
Venita F. Allison ◽  
J. E. Ubelaker ◽  
J. H. Martin
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Nervous System ◽  
Osmic Acid ◽  
Sensory Receptors ◽  
Transmission Electron ◽  
Sensory Structures ◽  
Fine Morphology ◽  
Scanning Electron

It has been suggested that parasitism results in a reduction of sensory structures which concomitantly reflects a reduction in the complexity of the nervous system. The present study tests this hypothesis by examining the fine morphology and the distribution of sensory receptors for two species of aspidogastrid trematodes by transmission and scanning electron microscopy. The species chosen are an ectoparasite, Cotylaspis insignis and an endoparasite, Aspidogaster conchicola.Aspidogaster conchicola and Cotylaspis insignis were obtained from natural infections of clams, Anodonta corpulenta and Proptera purpurata. The specimens were fixed for transmission electron microscopy in phosphate buffered paraformaldehyde followed by osmic acid in the same buffer, dehydrated in an ascending series of ethanol solutions and embedded in Epon 812.

Anisotropic Membranes as Substrates for Sem

1976 ◽  
Vol 34 ◽  
pp. 444-445
Author(s):  
Thomas P. Turnbull ◽  
W. F. Bowers
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
High Flow ◽  
Polymer Chemistry ◽  
Surface Porosity ◽  
Transmission Electron ◽  
Pore Texture ◽  
Spongy Layer ◽  
Scanning Electron

Until recently the prime purposes of filters have been to produce clear filtrates or to collect particles from solution and then remove the filter medium and examine the particles by transmission electron microscopy. These filters have not had the best characteristics for scanning electron microscopy due to the size of the pores or the surface topography. Advances in polymer chemistry and membrane technology resulted in membranes whose characteristics make them versatile substrates for many scanning electron microscope applications. These polysulphone type membranes are anisotropic, consisting of a very thin (0.1 to 1.5 μm) dense skin of extremely fine, controlled pore texture upon a much thicker (50 to 250μm), spongy layer of the same polymer. Apparent pore diameters can be controlled in the range of 10 to 40 A. The high flow ultrafilters which we are describing have a surface porosity in the range of 15 to 25 angstrom units (0.0015-0.0025μm).

Digital imaging: When should one take the plunge?

1996 ◽  
Vol 54 ◽  
pp. 602-603
Author(s):  
John F. Mansfield
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Optical Microscopy ◽  
Digital Imaging ◽  
Storage Devices ◽  
Major Benefit ◽  
Transmission Electron ◽  
New Instrument ◽  
Scanning Electron

The current imaging trend in optical microscopy, scanning electron microscopy (SEM) or transmission electron microscopy (TEM) is to record all data digitally. Most manufacturers currently market digital acquisition systems with their microscope packages. The advantages of digital acquisition include: almost instant viewing of the data as a high-quaity positive image (a major benefit when compared to TEM images recorded onto film, where one must wait until after the microscope session to develop the images); the ability to readily quantify features in the images and measure intensities; and extremely compact storage (removable 5.25” storage devices which now can hold up to several gigabytes of data).The problem for many researchers, however, is that they have perfectly serviceable microscopes that they routinely use that have no digital imaging capabilities with little hope of purchasing a new instrument.

Sign in / Sign up

Export Citation Format

Share Document