9-(10-phenylanthracen-9-yl)-Benzo[b]Fluoreno[3,4-d] Thiophene Derivatives for Blue Organic Light-Emitting Diodes

2021 ◽  
Vol 21 (7) ◽  
pp. 3914-3918
Author(s):  
Beomsu Jang ◽  
Giwoong Han ◽  
Kiju Kim ◽  
Hakjun Lee ◽  
Youngkwan Kim ◽  
...  
Keyword(s):  
Power Efficiency ◽  
Light Emitting Diodes ◽  
Organic Light Emitting Diodes ◽  
Blue Fluorescence ◽  
Light Emitting ◽  
Emissive Layer ◽  
Organic Light ◽  
Thiophene Derivatives ◽  
Cie Coordinates ◽  
Luminance Efficiency

In this study, two blue fluorescence materials using phenylanthracene-substituted fluorene derivatives were synthesized and characterized for organic light-emitting diodes (OLEDs). To study their electroluminescent properties, OLED devices were fabricated using these two materials as emissive layer (EML). A device using 7,7-diphenyl-9-(10-phenylanthracen-9-yl)-7H-benzo[b]fluoreno[3,4-d]thiophene in emitting layer showed the highest value of EQE value which is 3.51%. It also showed the luminance efficiency of 3.22 cd/A and power efficiency of 2.89 lm/W with the CIE coordinates (0.15, 0.09).

9-(10-phenylanthracen-9-yl)-7H-Fluoreno[4, 3-b]Benzofuran Derivatives for Blue Organic Light-Emitting Diodes

2021 ◽  
Vol 16 (5) ◽  
pp. 844-848
Author(s):  
Beomsu Jang ◽  
Giwoong Han ◽  
Kiju Kim ◽  
Hakjun Lee ◽  
Young Kwan Kim ◽  
...  
Keyword(s):  
Quantum Efficiency ◽  
External Quantum Efficiency ◽  
Power Efficiency ◽  
Light Emitting Diodes ◽  
Organic Light Emitting Diodes ◽  
Maximum Luminance ◽  
Light Emitting ◽  
Emissive Layer ◽  
Organic Light ◽  
Luminance Efficiency

In this study, two blue fluorescent using phenylanthracene-substituted furan derivatives were synthesized for organic light-emitting diodes (OLEDs) and subsequently characterized. To study the electroluminescent properties of the materials, OLED devices were fabricated using these two materials as an emissive layer (EML). The device using 7,7-diphenyl-9-(10-phenylanthracen-9-yl)-7H-fluoreno[4,3-b]benzofuran in the emitting layer showed the highest external quantum efficiency (EQE) value, 3.10%. It also showed the maximum luminance efficiency of 2.41 cd/A and maximum power efficiency of 1.90 lm/W with CIE coordinates of (0.15, 0.08).

Power-efficient solution-processed red organic light-emitting diodes based on an exciplex host and a novel phosphorescent iridium complex

2016 ◽  
Vol 4 (24) ◽  
pp. 5787-5794 ◽  
Author(s):  
Xuejing Liu ◽  
Bing Yao ◽  
Zilong Zhang ◽  
Xiaofei Zhao ◽  
Baohua Zhang ◽  
...  
Keyword(s):  
Power Efficiency ◽  
Efficient Solution ◽  
Light Emitting Diodes ◽  
Organic Light Emitting Diodes ◽  
Iridium Complex ◽  
Solution Processed ◽  
Power Efficient ◽  
Light Emitting ◽  
Organic Light ◽  
Cie Coordinates

A novel red heteroleptic iridium complex, Ir(DPA-Flpy-CF3)2acac, was synthesized and whose corresponding solution-processed PhOLED shows a record power efficiency of 44.5 lm W−1 with CIE coordinates of (0.64, 0.36).

Effect of Li2O/Al Cathode in Alq3 Based Organic Light-Emitting Diodes

2008 ◽  
Vol 8 (9) ◽  
pp. 4684-4687 ◽  
Author(s):  
Eun Chul Shin ◽  
Hui Chul Ahn ◽  
Wone Keun Han ◽  
Tae Wan Kim ◽  
Won Jae Lee ◽  
...  
Keyword(s):  
Power Efficiency ◽  
Light Emitting Diodes ◽  
Organic Light Emitting Diodes ◽  
Light Emitting ◽  
Turn On ◽  
Organic Light ◽  
Maximum Current ◽  
The One ◽  
Luminance Efficiency ◽  
A Current

An effect of bilayer cathode Li2O/Al was studied in Alq3 based organic light-emitting diodes with a variation of Li2O layer thickness. The current-luminance-voltage characteristics of ITO/TPD/Alq3/Li2O/Al device were measured at ambient condition to investigate the effect of Li2O/Al. It was found that when the thickness of Li2O layer is in the range of 0.5∼1 nm, there are improvements in luminance, efficiency, and turn-on voltage of the device. A current density and a luminance are increased by about 100 times, a turn-on voltage is lowered from 6 V to 3 V, a maximum current efficiency is improved by a factor of 2.3, and a maximum power efficiency is improved by a factor of 3.2 for a device with a use of thin Li2O layer compared to those of the one without the Li2O layer. These improvements are thought to be due to a lowering of electron-barrier height for electron injection from the cathode to the emissive layer.

Organic light-emitting diodes with hydrogenated In-doped ZnO thin films as transparent conductive electrodes

2008 ◽  
Vol 23 (6) ◽  
pp. 1674-1681 ◽  
Author(s):  
Young Ran Park ◽  
Young Sung Kim
Keyword(s):  
Power Efficiency ◽  
Light Emitting Diodes ◽  
Control Device ◽  
Hydrogen Gas ◽  
Organic Light Emitting Diodes ◽  
Light Emitting ◽  
Organic Light ◽  
Doped Zno ◽  
Transparent Conductive Electrodes ◽  
Luminance Efficiency

Hydrogenated In-doped ZnO (ZIO:H) films grown at different ratios, R, of hydrogen to argon were deposited at a substrate temperature of 100 °C for the organic light-emitting diodes (OLEDs). The OLEDs with the ZIO:H (R = 0.08) anode achieved a maximum luminance efficiency of 3.4 cd/A and a power efficiency of 0.6 lm/W, which are as good as the values of the control device fabricated on a tin-doped indium oxide (ITO) anode. This indicates that the efficiency of the OLEDs is critically affected by the ratio of injected hydrogen gas during the deposition of the ZIO and that the ZIO:H developed herein is promising as an alternative to conventional ITO.

Blue Fluorescent Organic Light-Emitting Diodes Using 11,11-Dimethyl-3-(10-phenylanthracen-9-yl)-11H-Indeno[1,2-b]Quinoline Derivatives

2020 ◽  
Vol 20 (8) ◽  
pp. 4652-4656
Author(s):  
Junyoung Moon ◽  
Jinho Lee ◽  
Ki Ju Kim ◽  
Hakjun Lee ◽  
Young Kwan Kim ◽  
...  
Keyword(s):  
Indium Tin Oxide ◽  
Power Efficiency ◽  
Light Emitting Diodes ◽  
Coupling Reaction ◽  
Organic Light Emitting Diodes ◽  
Blue Fluorescence ◽  
Suzuki Coupling Reaction ◽  
Light Emitting ◽  
Organic Light ◽  
20 Nm

In this study, we designed and synthesized two blue fluorescence materials using phenylanthracenesubstituted-indenoquinoline derivatives by Suzuki coupling reaction for organic light-emitting diodes (OLEDs). In order to study their electroluminescent properties, we fabricated the OLED devices using these two materials as emissive layer (EML) with the following sequence: indium-tin-oxide (ITO, 180 nm)/4,4′,4″-tris[2-naphthyl(phenyl)-amino]triphenylamine (2-TNATA, 30 nm)/N,N′-diphenyl-N,N′-(2-napthyl)-(1,1′-phenyl)-4,4′-diamine (NPB, 20 nm)/Blue emitting materials (20 nm)/4,7-Diphenyl-1,10-phenanthroline (Bphen, 30 nm)/lithium quinolate (Liq, 2 nm)/Al (100 nm). In particular, a device using 11,11-dimethyl-3-(10-phenylanthracen-9-yl)-11H-Indeno[1,2-b]quinoline in emitting layer showed luminous efficiency, power efficiency, and external quantum efficiency of 2.18 cd/A, 1.10 lm/W, 2.20% at 20 mA/cm2, respectively, with Commission Internationale d’Énclairage (CIE) coordinates of (0.15, 0.11) at 8.0 V.

Improve the Charge Balance of White Phosphorescent Organic Light Emitting Diodes Using Co-Doped Electron Transport Layer in Emitting Layer

2011 ◽  
Vol 287-290 ◽  
pp. 3051-3055
Author(s):  
Yu Sheng Tsai ◽  
Lin Ann Hong ◽  
Fuh Shyang Juang ◽  
Kuang Chih Lai ◽  
Chang Jun Lai ◽  
...  
Keyword(s):  
Electron Transport ◽  
Power Efficiency ◽  
Light Emitting Diodes ◽  
Hole Transport ◽  
Organic Light Emitting Diodes ◽  
Electron Transport Layer ◽  
Driving Voltage ◽  
Light Emitting ◽  
Organic Light ◽  
Luminance Efficiency

White phosphorescent organic light-emitting diodes (WPHOLED) with high efficiency and low driving voltage were achieved by incorporating an electron transport material (3TPYMB) into a hole transport-type host (TCTA) as a mixed-host structure. For electrons, the emitting layer is nearly barrier-free until they reach the region of exciton formation, which keeps the driving voltage low. Therefore, improved the charge carrier balance within the emitting layer and enhanced the power efficiency of device. White PHOLED at a luminance of 1000 cd/m2 shown a driving voltage of 4.38 V, luminance efficiency of 36.1 cd/A, and power efficiency of 26.4 lm/W was observed. Furthermore, the power efficiency can be improved to 34.27 lm/W, and luminance efficiency to 46.7 cd/A by attaching a brightness enhancement film (BEF).

7,7-Dimethyl-9-(10-phenylanthracen-9-yl)-7H-Benzo[b] Fluoreno[3,4-d]Thiophene Derivatives for Blue Fluorescent Organic Light-Emitting Diodes

2021 ◽  
Vol 21 (9) ◽  
pp. 4665-4669
Author(s):  
Jin Ho Lee ◽  
Gi Woong Han ◽  
Ki Ju Kim ◽  
Hakjun Lee ◽  
Young Kwan Kim ◽  
...  
Keyword(s):  
Quantum Efficiency ◽  
External Quantum Efficiency ◽  
Power Efficiency ◽  
Luminous Efficiency ◽  
Organic Light Emitting Diodes ◽  
Blue Fluorescence ◽  
Light Emitting ◽  
Organic Light ◽  
Anthracene Derivatives ◽  
Thiophene Derivatives

In this study, we designed and synthesized two blue fluorescence materials using 7,7-dimethyl-9-(10-phenylanthracen-9-yl)-7H-benzo[b]fluoreno[3,4-d]thiophene substituted anthracene derivatives. To characterize their electroluminescent properties, we fabricated the OLED devices using these two emitting materials. Particularly, a device using 7,7-dimethyl-9-(10-phenylanthracen-9-yl)-7Hbenzo[ b]fluoreno[3,4-d]thiophene showed maximum values of luminous efficiency, power efficiency, and external quantum efficiency of 2.42 cd/A, 1.48 lm/W, 3.08% at 20 mA/cm2, respectively with CIE (x, y) coordinates of (0.15, 0.09) at 8.0 V.

scholarly journals Management of Exciton for Highly-Efficient Hybrid White Organic Light-Emitting Diodes with a Non-Doped Blue Emissive Layer

Molecules ◽  
2019 ◽  
Vol 24 (22) ◽  
pp. 4046
Author(s):  
Wei Luo ◽  
Xing Chen ◽  
Shuang-Qiao Sun ◽  
Yi-Jie Zhang ◽  
Tong-Tong Wang ◽  
...  
Keyword(s):  
Power Efficiency ◽  
High Efficiency ◽  
Light Emitting Diodes ◽  
Fluorescent Dyes ◽  
Organic Light Emitting Diodes ◽  
Superior Performance ◽  
Emission Region ◽  
Light Emitting ◽  
Emissive Layer ◽  
Organic Light

Hybrid white organic light-emitting diodes (WOLEDs) have drawn great attention both for display and solid-state lighting purposes because of the combined advantages of desirable stability of fluorescent dyes and high efficiency of phosphorescent materials. However, in most WOLEDs, obtaining high efficiency often requires complex device structures. Herein, we achieved high-efficiency hybrid WOLEDs using a simple but efficacious structure, which included a non-doped blue emissive layer (EML) to separate the exciton recombination zone from the light emission region. After optimization of the device structure, the WOLEDs showed a maximum power efficiency (PE), current efficiency (CE), and external quantum efficiency (EQE) of 82.3 lm/W, 70.0 cd/A, and 22.2%, respectively. Our results presented here provided a new option for promoting simple-structure hybrid WOLEDs with superior performance.

Interface and thickness tuning for blade coated small-molecule organic light-emitting diodes with high power efficiency

2013 ◽  
Vol 114 (12) ◽  
pp. 123101 ◽  
Author(s):  
Yu-Fan Chang ◽  
Yu-Chian Chiu ◽  
Hao-Wen Chang ◽  
Yi-Siang Wang ◽  
Yi-Lun Shih ◽  
...  
Keyword(s):  
Small Molecule ◽  
High Power ◽  
Power Efficiency ◽  
Light Emitting Diodes ◽  
Organic Light Emitting Diodes ◽  
Light Emitting ◽  
Organic Light ◽  
High Power Efficiency
Sign in / Sign up

Export Citation Format

Share Document