An Eco-Friendly Procedure for Preparation of Activated Carbon as a Capture Material of Heavy Metals in Wastewater

2020 ◽  
Vol 12 (8) ◽  
pp. 1157-1163
Author(s):  
Foziah F. Al-Fawzan
Keyword(s):  
Electron Microscopy ◽  
Heavy Metals ◽  
Activated Carbon ◽  
Contact Time ◽  
Heavy Elements ◽  
Surface Scanning ◽  
Dried Fruits ◽  
Initial Concentration ◽  
Synthetic Adsorbents ◽  
Scanning Electron

This study aims to prepare an activated carbon from environmentally and inexpensive materials such as banana peels. The synthetic activated carbon has been employed in the capture of heavy elements e.g., copper (Cu), zinc (Zn) and cadmium (Cd) ions from wastewater. The spectroscopic (Fourier-transform infrared; FTIR) and morphological surface (scanning electron microscopy; SEM) investigations of the activated carbon were assigned. Adsorption of mentioned heavy metals upon the activated carbon studies were performed with different parameters such as effect of contact time, initial concentration of the heavy metal and pH (2–10) of the solution. A comparison of the adsorption capacity of the synthetic activated carbon (dried banana peels) with different adsorbents previously used (dried fruits peels) for Cu(II), Zn(II) and Cd(II) ions removal from wastewater streams shows its observable efficiency over many other treated and untreated natural and synthetic adsorbents. The Cu(II) ions showed the highest removal efficiency followed by Cd(II) then Zn(II) ions.

scholarly journals ADSORPTION OF PHENOL POLLUTANTS FROM AQUEOUS SOLUTION USING Ca-BENTONITE/CHITOSAN COMPOSITE

2015 ◽  
Vol 22 (2) ◽  
pp. 233 ◽  
Author(s):  
Poedji Loekitowati Hariani ◽  
Fatma Fatma ◽  
Fahma Riyanti ◽  
Hesti Ratnasari
Keyword(s):  
Electron Microscopy ◽  
Aqueous Solution ◽  
Contact Time ◽  
Batch Adsorption ◽  
Shrimp Waste ◽  
Initial Concentration ◽  
X Ray ◽  
Chitosan Composite ◽  
Scanning Electron

Phenolic compounds areorganic pollutants that are toxic and carcinogenic.The presence of phenol in the environmentcan be adverse to humanand the environmentalsystem. One methodthat iseffective toreduce thephenolisadsorption. In this study, the adsorption of phenol in aqueous solution using Ca-bentonite/chitosan composite was investigated. Chitosan is the deacetylation product of chitin from shrimp waste. Characterization of Ca-bentonite/chitosan composite was done by using Fourier Transform Infrared (FTIR) and Scanning Electron Microscopy-Energy Dispersive X Ray Spectroscopy (SEM-EDX). Batch adsorption studies were performed to evaluate the effects of some parameters such as initial concentration of phenol, composite weight, pH and contact time. The results showed that FTIR spectra of Ca-bentonite/chitosan composite presented the characteristic of peak of Ca-bentonite and chitosan that confirmed the successful synthesis of composite. The SEM-EDX characterizationresultsshowedCa-bentonite surfacecoverage by chitosanand the presence ofcarbonandnitrogenelementsinCa-bentonite/chitosancompositeindicated that chitosan had bonded with bentonite. The optimum condition of adsorption of Ca-bentonite/chitosan to phenol was obtained at 125 mg.L-1 of concentration in which the weight of composite was 1.0 g, the pH of solution was 7, the contact time was 30 minutes, and the capacity of adsorption was 12.496 mg.g-1.

scholarly journals Acinetobacter tandoii ZM06 Assists Glutamicibacter nicotianae ZM05 in Resisting Cadmium Pressure to Preserve Dipropyl Phthalate Biodegradation

2021 ◽  
Vol 9 (7) ◽  
pp. 1417
Author(s):  
Xuejun Wang ◽  
Si Shen ◽  
Hao Wu ◽  
Haixia Wang ◽  
Lvjing Wang ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Heavy Metals ◽  
Microbial Consortia ◽  
Environmental Media ◽  
Degrading Bacterium ◽  
Coculture System ◽  
Heavy Metals Contamination ◽  
Metabolite Inhibition ◽  
Comparative Transcriptomic Analysis ◽  
Scanning Electron

Dipropyl phthalate (DPrP) coexists with cadmium as cocontaminants in environmental media. A coculture system including the DPrP-degrading bacterium Glutamicibacter nicotianae ZM05 and the nondegrading bacterium Acinetobacter tandoii ZM06 was artificially established to degrade DPrP under Cd(II) stress. Strain ZM06 relieved the pressure of cadmium on strain ZM05 and accelerated DPrP degradation in the following three ways: first, strain ZM06 adsorbed Cd(II) on the cell surface (as observed by scanning electron microscopy) to decrease the concentration of Cd(II) in the coculture system; second, the downstream metabolites of ZM05 were utilized by strain ZM06 to reduce metabolite inhibition; and third, strain ZM06 supplied amino acids and fatty acids to strain ZM05 to relieve stress during DPrP degradation, which was demonstrated by comparative transcriptomic analysis. This study provides an elementary understanding of how microbial consortia improve the degradation efficiency of organic pollutants under heavy metals contamination.

Evaluation of computer-controlled SEM in the study of metal-contaminated soils

2003 ◽  
Vol 67 (2) ◽  
pp. 219-231 ◽  
Author(s):  
H. W. Langmi ◽  
J. Watt
Keyword(s):  
Electron Microscopy ◽  
Heavy Metals ◽  
Contaminated Soils ◽  
X Ray ◽  
Computer Controlled ◽  
Weathering Crusts ◽  
Individual Particles ◽  
Element Mapping ◽  
Scanning Electron

Computer-controlled scanning electron microscopy (CCSEM) has been assessed for the determination of form and size distribution of heavy metals in urban contaminated soils. Metal distributions within individual particles were determined using X-ray element mapping. The sites selected for study were (1) around a landfill site, previously a colliery in Wolverhampton, UK and (2) a private garden adjacent to a railway in Nottingham, UK. Backscattered thresholding techniques were used to isolate the Pb-containing categories. The classification results for both Wolverhampton and Nottingham soils were generally similar but more Pb-containing classes were observed for the Nottingham samples when a comparison was made between results of the same size fractions. However, difficulties with the technique arose when particles showing chemically similar weathering crusts were assigned to the same class, despite having different internal compositions. The CCSEM data therefore need to be interpreted with caution and their application limited to situations in which particle internal complexity is not an issue.

Removal of Geosmin by Powered Activated Carbon as an Emergency Method

2014 ◽  
Vol 587-589 ◽  
pp. 616-619
Author(s):  
Zheng Wang ◽  
Dong Zhang ◽  
Ping Xia ◽  
Hui Ye ◽  
Wen Qi Zhou
Keyword(s):  
Activated Carbon ◽  
Contact Time ◽  
Adsorption Efficiency ◽  
Initial Concentration ◽  
Application Point ◽  
Removal Efficiencies

The removal of geosmin by powered activated carbon (PAC) was studied at laboratory to select suitable PAC type and the removal efficiencies of geosmin by PAC in different application point as an emergency method were evaluated. The adsorption efficiency of coal-based PAC on geosmin was superior to that of bamboo-based PAC. The contact time and PAC dose were two important factors that affect the removal effect of geosmin. Geosmin could be controled below 10ng/L at 200ng/L of initial concentration.

scholarly journals Phenol removal from aqueous solution using silica and activated carbon derived from rice husk

2019 ◽  
Vol 14 (4) ◽  
pp. 897-907 ◽  
Author(s):  
Hosseinali Asgharnia ◽  
Hamidreza Nasehinia ◽  
Roohollah Rostami ◽  
Marziah Rahmani ◽  
Seyed Mahmoud Mehdinia
Keyword(s):  
Aqueous Solution ◽  
Activated Carbon ◽  
Water Treatment ◽  
Organic Pollutants ◽  
Rice Husk ◽  
Contact Time ◽  
Adsorption Process ◽  
Phenol Removal ◽  
Initial Concentration ◽  
Maximum Removal

Abstract Phenol and its derivatives are organic pollutants with dangerous effects, such as poisoning, carcinogenicity, mutagenicity, and teratogenicity in humans and other organisms. In this study, the removal of phenol from aqueous solution by adsorption on silica and activated carbon of rice husk was investigated. In this regard, the effects of initial concentration of phenol, pH, dosage of the adsorbents, and contact time on the adsorption of phenol were investigated. The results showed that the maximum removal of phenol by rice husk silica (RHS) and rice husk activated carbon (RHAC) in the initial concentration of 1 mgL−1 phenol, 2 gL−1 adsorbent mass, 120 min contact time, and pH 5 (RHS) or pH 6 (RHAC) were obtained up to 91% and 97.88%, respectively. A significant correlation was also detected between increasing contact times and phenol removal for both adsorbents (p < 0.01). The adsorption process for both of the adsorbents was also more compatible with the Langmuir isotherm. The results of this study showed that RHS and RHAC can be considered as natural and inexpensive adsorbents for water treatment.

Sorption of Methylene Blue and Acid Orange 7 onto Ananas comosus Peels and Leaves Based Activated Carbon

2013 ◽  
Vol 330 ◽  
pp. 112-116 ◽  
Author(s):  
Nabilah A. Lutpi ◽  
N. Najihah Jamil ◽  
C.K. Kairulazam C.K. Abdullah ◽  
Yee Shian Wong ◽  
Soon An Ong ◽  
...  
Keyword(s):  
Methylene Blue ◽  
Activated Carbon ◽  
Contact Time ◽  
Time Effect ◽  
Ananas Comosus ◽  
Acid Orange 7 ◽  
Initial Concentration ◽  
Adsorbent Dosage ◽  
Acid Orange ◽  
Percentage Removal

The adsorption of Methylene Blue (MB) and Acid Orange 7 (AO7) dye onto Ananas Comosus Mixed Peels and Leaves (ACMPL) were carried out by conducting four different parameters such as initial concentration, pH, dosage of adsorbent, and contact time. Effect of initial concentration for both dyes showed that higher initial concentration would take longer contact time to attain equilibrium due to higher amount of adsorbate molecules. The effect of pH showed highest percentage removal for MB is at pH 9 which is 95.81%. Meanwhile for AO7 the highest percentage removal is 31.06% at pH 3. The percentage removal of MB had reached the equilibrium at dosage 0.5g while AO7 keep increasing with the increment of adsorbent dosage. The percentage removal of MB and AO7 had increased until hour 2.5 which was from 72.5% to 86.93% and 19.441% to 36.89% respectively and reached equilibrium at 3 hour contact time.

Biopolymer Encapsulation of PEI-Derivatives for Heavy Metal Sorption

2015 ◽  
Vol 1130 ◽  
pp. 529-532
Author(s):  
Caroline Bertagnolli ◽  
Thierry Vincent ◽  
Eric Guibal
Keyword(s):  
Electron Microscopy ◽  
Heavy Metal ◽  
Scanning Electron Microscopy ◽  
Composite Materials ◽  
Metal Sorption ◽  
Initial Concentration ◽  
Heavy Metal Sorption ◽  
Maximum Sorption ◽  
Complex Solutions ◽  
Scanning Electron

Composite materials have been synthesized by alginate or chitosan encapsulation of polyethylenimine (PEI) derivatives (obtained by glutaraldehyde grafting of histidine and carbon disulfide). Discrete or agglomerated PEI-derivative particles are immobilized in the macroporous network of biopolymer matrix (as shown by scanning electron microscopy and SEM-EDX analysis). The effect of pH and initial concentration on Zn (II) and Cu (II) sorption performance were analyzed. The incorporation of PEI-derivatives biopolymer matrix improves sorption performance in complex solutions (doped with CaCl2) compared to pristine biopolymer. Maximum sorption capacities range from 0.64 to 1 mmol L-1 for Zn (II) and from 1.13 to 1.67 mmol L-1 for Cu (II).

Sign in / Sign up

Export Citation Format

Share Document