scholarly journals High-Resolution Simulations of Lee Waves and Downslope Winds over the Sierra Nevada during T-REX IOP 6

2012 ◽  
Vol 51 (7) ◽  
pp. 1333-1352 ◽  
Author(s):  
Peter Sheridan ◽  
Simon Vosper
Keyword(s):  
High Resolution ◽  
Sierra Nevada ◽  
Cross Sections ◽  
Weather Prediction ◽  
Vertical Motion ◽  
Owens Valley ◽  
Downslope Winds ◽  
Lee Waves ◽  
Rotor Experiment ◽  
Intensive Observation

AbstractThe downslope windstorm during intensive observation period (IOP) 6 was the most severe that was detected during the Terrain-Induced Rotor Experiment (T-REX) in Owens Valley in the Sierra Nevada of California. Cross sections of vertical motion in the form of a composite constructed from aircraft data spanning the depth of the troposphere are used to link the winds experienced at the surface to the changing structure of the mountain-wave field aloft. Detailed analysis of other observations allows the role played by a passing occluded front, associated with the rapid intensification (and subsequent cessation) of the windstorm, to be studied. High-resolution, nested modeling using the Met Office Unified Model (MetUM) is used to study qualitative aspects of the flow and the influence of the front, and this modeling suggests that accurate forecasting of the timing and position of both the front and strong mountaintop winds is crucial to capture the wave dynamics and accompanying windstorm. Meanwhile, far ahead of the front, simulated downslope winds are shallow and foehnlike, driven by the thermal contrast between the upstream and valley air mass. The study also highlights the difficulties of capturing the detailed interaction of weather systems with large and complex orography in numerical weather prediction.

scholarly journals Diurnal Variation of Downslope Winds in Owens Valley during the Sierra Rotor Experiment

2008 ◽  
Vol 136 (10) ◽  
pp. 3760-3780 ◽  
Author(s):  
Qingfang Jiang ◽  
James D. Doyle
Keyword(s):  
Diurnal Variation ◽  
Numerical Simulations ◽  
Western Slope ◽  
Owens Valley ◽  
Mountain Waves ◽  
Downslope Winds ◽  
Wind Event ◽  
Downslope Wind ◽  
Rotor Experiment ◽  
The Impact

The impact of diurnal forcing on a downslope wind event that occurred in Owens Valley in California during the Sierra Rotors Project (SRP) in the spring of 2004 has been examined based on observational analysis and diagnosis of numerical simulations. The observations indicate that while the upstream flow was characterized by persistent westerlies at and above the mountaintop level the cross-valley winds in Owens Valley exhibited strong diurnal variation. The numerical simulations using the Coupled Ocean–Atmosphere Mesoscale Prediction System (COAMPS) capture many of the observed salient features and indicate that the in-valley flow evolved among three states during a diurnal cycle. Before sunrise, moderate downslope winds were confined to the western slope of Owens Valley (shallow penetration state). Surface heating after sunrise weakened the downslope winds and mountain waves and eventually led to the decoupling of the well-mixed valley air from the westerlies aloft around local noon (decoupled state). The westerlies plunged into the valley in the afternoon and propagated across the valley floor (in-valley westerly state). After sunset, the westerlies within the valley retreated toward the western slope, where the downslope winds persisted throughout the night.

Observations of Atmospheric Structure and Dynamics in the Owens Valley of California with a Ground-Based, Eye-Safe, Scanning Aerosol Lidar*

2009 ◽  
Vol 48 (7) ◽  
pp. 1483-1499 ◽  
Author(s):  
Stephan F. J. De Wekker ◽  
Shane D. Mayor
Keyword(s):  
Cross Sections ◽  
Time Lapse ◽  
Breaking Waves ◽  
Mountain Range ◽  
Owens Valley ◽  
Atmospheric Flows ◽  
Drainage Flows ◽  
Rotor Experiment ◽  
First Results ◽  
Atmospheric Phenomena

Abstract First results are presented from the deployment of the NCAR Raman-Shifted Eye-Safe Aerosol Lidar (REAL) in the Owens Valley of California during the Terrain-Induced Rotor Experiment (T-REX) in March and April 2006. REAL operated in range–height indicator (RHI) and plan position indicator (PPI) scanning modes to observe the vertical and horizontal structures of the aerosol and cloud distribution in a broad valley in the lee of a tall mountain range. The scans produce two-dimensional cross sections that when animated produce time-lapse visualizations of the microscale and mesoscale atmospheric structures and dynamics. The 2-month dataset includes a wide variety of interesting atmospheric phenomena. When the synoptic-scale flow is strong and westerly, the lidar data reveal mountain-induced waves, hydraulic jumps, and rotorlike circulations that lift aerosols to altitudes of more than 2 km above the valley. Shear instabilities occasionally leading to breaking waves were observed in cloud and aerosol layers under high wind conditions. In quiescent conditions, the data show multiple aerosol layers, upslope flows, and drainage flows interacting with valley flows. The results demonstrate that a rapidly scanning, eye-safe, ground-based aerosol lidar can be used to observe important features of clear-air atmospheric flows and can contribute to an improved understanding of mountain-induced meteorological phenomena. The research community is encouraged to use the dataset in support of their observational analysis and modeling efforts.

An Investigation of a Commercial Aircraft Encounter with Severe Clear-Air Turbulence over Western Greenland

2012 ◽  
Vol 51 (1) ◽  
pp. 42-53 ◽  
Author(s):  
R. D. Sharman ◽  
J. D. Doyle ◽  
M. A. Shapiro
Keyword(s):  
High Resolution ◽  
Prediction Models ◽  
Weather Prediction ◽  
Simulation Models ◽  
Wave Drag ◽  
Commercial Aircraft ◽  
Mountain Wave ◽  
Air Turbulence ◽  
Lee Waves ◽  
Horizontal Grid

AbstractThis study presents digital flight data recorder (DFDR) analyses and high-resolution numerical simulations relevant to a severe clear-air turbulence (CAT) encounter over western Greenland by a Boeing 777 aircraft at 10-km elevation at 1305 UTC 25 May 2010. The environmental flow was dominated by an extratropical cyclone to the southeast of the Greenland tip, resulting in easterly flow at all levels. The results of the analyses indicate that the CAT encounter was related to mountain-wave breaking on the western lee (downslope) of the Greenland plateau. The simulations were not of especially high resolution (5-km horizontal grid spacing) by today’s standards, yet the simulation results do produce large-amplitude lee waves and overturning in good agreement with the encounter location as indicated by the DFDR. The success of this and other simulations in reproducing mountain-wave turbulence (MWT) events suggests that operational implementation of high-resolution nonhydrostatic simulation models, possibly an ensemble of models, over MWT-prone areas could produce more reliable forecasts of MWT than are currently available using gravity-wave-drag or MWT-postprocessing algorithms derived from global weather prediction models of relatively coarse scale.

Vorticity from Line-of-Sight Lidar Velocity Scans

2009 ◽  
Vol 26 (12) ◽  
pp. 2683-2690 ◽  
Author(s):  
Martin Weissmann ◽  
Andreas Dörnbrack ◽  
James D. Doyle
Keyword(s):  
High Resolution ◽  
Numerical Simulations ◽  
Cross Sections ◽  
Polar Coordinates ◽  
Line Of Sight ◽  
Rotor Experiment ◽  
Vorticity Component ◽  
Wind Lidar ◽  
Spanwise Vorticity ◽  
Lidar Observations

Abstract A method is presented to compute the spanwise vorticity in polar coordinates from 2D vertical cross sections of high-resolution line-of-sight Doppler wind lidar observations. The method uses the continuity equation to derive the velocity component perpendicular to the observed line-of-sight velocity, which then yields the spanwise vorticity component. The results of the method are tested using a ground-based Doppler lidar, which was deployed during the Terrain-Induced Rotor Experiment (T-REX). The resulting fields can be used to identify and quantify the strength and size of vortices, such as those associated with atmospheric rotors. Furthermore, they may serve to investigate the dynamics and evolution of vortices and to evaluate numerical simulations. A demonstration of the method and comparison with high-resolution numerical simulations reveals that the derived vorticity can explain 66% of the mean-square vorticity fluctuations, has a reasonably skillful magnitude, exhibits no significant bias, and is in qualitative agreement with model-derived vorticity.

Lee-Wave Resonances over Double Bell-Shaped Obstacles

2009 ◽  
Vol 66 (5) ◽  
pp. 1205-1228 ◽  
Author(s):  
Vanda Grubišić ◽  
Ivana Stiperski
Keyword(s):  
Sierra Nevada ◽  
Lower Boundary ◽  
Vertical Wind Shear ◽  
Separation Distance ◽  
Wave Drag ◽  
Owens Valley ◽  
Lower Boundary Condition ◽  
Atmospheric Structure ◽  
Lee Waves ◽  
Lee Wave

Abstract Lee-wave resonance over double bell-shaped obstacles is investigated through a series of idealized high-resolution numerical simulations with the nonhydrostatic Coupled Ocean–Atmosphere Mesoscale Prediction System (COAMPS) model using a free-slip lower boundary condition. The profiles of wind speed and stability as well as terrain derive from observations of lee-wave events over the Sierra Nevada and Inyo Mountains from the recently completed Terrain-Induced Rotor Experiment (T-REX). Numerical experiments show that double bell-shaped obstacles promote trapped lee waves that are in general shorter than those excited by an isolated ridge. While the permissible trapped lee-wave modes are determined by the upstream atmospheric structure, primarily vertical wind shear, the selected lee-wave wavelengths for two obstacles that are close or equal in height are dictated by the discrete terrain spectrum and correspond to higher harmonics of the primary orographic wavelength, which is equal to the ridge separation distance. The exception is the smallest ridge separation distance examined, one that corresponds to the Owens Valley width and is closest to the wavelength determined by the given upstream atmospheric structure, for which the primary lee-wave and orographic wavelengths were found to nearly coincide. The influence two mountains exert on the overall lee-wave field is found to persist at very large ridge separation distances. For the nonlinear nonhydrostatic waves examined, the ridge separation distance is found to exert a much stronger control over the lee-wave wavelengths than the mountain half-width. Positive and negative interferences of lee waves, which can be detected through their imprint on wave drag and wave amplitudes, were found to produce appreciable differences in the flow structure mainly over the downstream peak, with negative interference characterized by a highly symmetric flow pattern leading to a low drag state.

Atmospheric Rotors and Severe Turbulence in a Long Deep Valley

2016 ◽  
Vol 73 (4) ◽  
pp. 1481-1506 ◽  
Author(s):  
Lukas Strauss ◽  
Stefano Serafin ◽  
Vanda Grubišić
Keyword(s):  
Sierra Nevada ◽  
Flow Separation ◽  
Owens Valley ◽  
Mountain Waves ◽  
Side Pressure ◽  
Thermally Driven ◽  
Rotor Experiment ◽  
Downslope Flow ◽  
Using Data ◽  
Turbulence Generation

Abstract The conceptual model of an atmospheric rotor is reexamined in the context of a valley, using data from the Terrain-Induced Rotor Experiment (T-REX) conducted in 2006 in the southern Sierra Nevada and Owens Valley, California. All T-REX cases with strong mountain-wave activity have been investigated, and four of them (IOPs 1, 4, 6, and 13) are presented in detail. Their analysis reveals a rich variety of rotorlike turbulent flow structures that may form in the valley during periods of strong cross-mountain winds. Typical flow scenarios in the valley include elevated turbulence zones, downslope flow separation at a valley inversion, turbulent interaction of in-valley westerlies and along-valley flows, and highly transient mountain waves and rotors. The scenarios can be related to different stages of the passage of midlatitude frontal systems across the region. The observations from Owens Valley show that the elements of the classic rotor concept are modulated and, at times, almost completely offset by dynamically and thermally driven processes in the valley. Strong lee-side pressure perturbations induced by large-amplitude waves, commonly regarded as the prerequisite for flow separation, are found to be only one of the factors controlling rotor formation and severe turbulence generation in the valley. Buoyancy perturbations in the thermally layered valley atmosphere appear to play a role in many of the observed cases. Based on observational evidence from T-REX, extensions to the classic rotor concept, appropriate for a long deep valley, are proposed.

scholarly journals Virtual and Real Topography for Flows across Mountain Ranges

2015 ◽  
Vol 54 (4) ◽  
pp. 723-731 ◽  
Author(s):  
Laurence Armi ◽  
Georg J. Mayr
Keyword(s):  
Sierra Nevada ◽  
Horizontal Scale ◽  
Strong Response ◽  
Mountain Ranges ◽  
Flow Response ◽  
Continental Divide ◽  
Weak Density ◽  
Rotor Experiment ◽  
Intensive Observation ◽  
Observation Period

AbstractA combination of real and virtual topography is shown to be crucial to describe the essentials of stratified flow over mountain ranges and leeside valleys. On 14 March 2006 [Intensive Observation Period 4 of the Terrain-Induced Rotor Experiment (T-REX)], a nearly neutral cloud-filled layer, capped by a strong density step, overflowed the Sierra Nevada and separated from the lee slope upon encountering a cooler valley air mass. The flow in this lowest layer was asymmetric across and hydraulically controlled at the crest with subcritical flow upstream and supercritical flow downstream. The density step at the top of this flowing layer formed a virtual topography, which descended 1.9 km and determined the horizontal scale and shape of the flow response aloft reaching into the stratosphere. A comparison shows that the 11 January 1972 Boulder, Colorado, windstorm case was similar: hydraulically controlled at the crest with the same strength and descent of the virtual topography. In the 18 February 1970 Boulder case, however, the layer beneath the stronger virtual topography was subcritical everywhere with a symmetric dip across the Continental Divide of only 0.5 km. In all three cases, the response and strength of the flow aloft depend on the virtual topography. The layer up to the next strong density step at or near the tropopause was hydraulically supercritical for the 18 February case, subcritical for the T-REX case, and critically controlled for the 11 January case, for which a weak density step and isolating layer aloft made possible the strong response aloft for which it is famous.

An Analysis of Dissociation of Molecules in a High Resolution Electron Microscope

1973 ◽  
Vol 31 ◽  
pp. 486-487
Author(s):  
Mihir Parikh
Keyword(s):  
Electron Microscope ◽  
High Resolution ◽  
Cross Sections ◽  
Resolving Power ◽  
Peak Intensity ◽  
Molecular Film ◽  
Resolution Electron ◽  
Dissociation Cross Section ◽  
High Resolution Electron Microscope ◽  
The Stability

It is well known that the resolution of bio-molecules in a high resolution electron microscope depends not just on the physical resolving power of the instrument, but also on the stability of these molecules under the electron beam. Experimentally, the damage to the bio-molecules is commo ly monitored by the decrease in the intensity of the diffraction pattern, or more quantitatively by the decrease in the peaks of an energy loss spectrum. In the latter case the exposure, EC, to decrease the peak intensity from IO to I’O can be related to the molecular dissociation cross-section, σD, by EC = ℓn(IO /I’O) /ℓD. Qu ntitative data on damage cross-sections are just being reported, However, the microscopist needs to know the explicit dependence of damage on: (1) the molecular properties, (2) the density and characteristics of the molecular film and that of the support film, if any, (3) the temperature of the molecular film and (4) certain characteristics of the electron microscope used

Comparison of ultra high resolution immersion lens CFESEM and TEM for imaging of semiconductor devices

1990 ◽  
Vol 48 (4) ◽  
pp. 622-623
Author(s):  
Terrence Reilly ◽  
Al Pelillo ◽  
Barbara Miner
Keyword(s):  
High Resolution ◽  
Sample Preparation ◽  
Cross Sections ◽  
Semiconductor Devices ◽  
Ion Milling ◽  
Observation Area ◽  
Transmission Electron ◽  
Milling Machines ◽  
Resolution Imaging ◽  
Electron Microscopes

The use of transmission electron microscopes (TEM) has proven to be very valuable in the observation of semiconductor devices. The need for high resolution imaging becomes more important as the devices become smaller and more complex. However, the sample preparation for TEM observation of semiconductor devices have generally proven to be complex and time consuming. The use of ion milling machines usually require a certain degree of expertise and allow a very limited viewing area. Recently, the use of an ultra high resolution "immersion lens" cold cathode field emission scanning electron microscope (CFESEM) has proven to be very useful in the observation of semiconductor devices. Particularly at low accelerating voltages where compositional contrast is increased. The Hitachi S-900 has provided comparable resolution to a 300kV TEM on semiconductor cross sections. Using the CFESEM to supplement work currently being done with high voltage TEMs provides many advantages: sample preparation time is greatly reduced and the observation area has also been increased to 7mm. The larger viewing area provides the operator a much greater area to search for a particular feature of interest. More samples can be imaged on the CFESEM, leaving the TEM for analyses requiring diffraction work and/or detecting the nature of the crystallinity.

Sign in / Sign up

Export Citation Format

Share Document