The Role of Surface Heat Fluxes on the Size of Typhoon Megi (2016)

2021 ◽  
Author(s):  
Li-Zhi Shen ◽  
Chun-Chieh Wu ◽  
Falko Judt
Keyword(s):  
Heat Flux ◽  
Surface Heat Flux ◽  
Inner Core ◽  
Outer Region ◽  
Outer Core ◽  
Surface Heat ◽  
Core Region ◽  
Heat Fluxes ◽  
Secondary Circulation ◽  
Surface Heat Fluxes

AbstractThis study attempts to understand how surface heat fluxes in different storm regions affect tropical cyclone (TC) size. The Advanced Research Weather Research and Forecasting (ARW-WRF) model (version 3.5.1) is used to simulate Typhoon Megi (2016). A series of numerical experiments are carried out, including a control simulation and several sensitivity experiments with surface heat fluxes suppressed in different TC regions [to mimic the reduction of the Wind-Induced Surface Heat Exchange (WISHE) feedback in the inner and/or outer core]. The results show that with surface heat fluxes suppressed in the entire domain, the TC tends to be smaller. Meanwhile, the TC size is more sensitive to the surface heat flux change in the outer core than to that in the inner core. Suppressing surface heat fluxes can weaken the rainbands around the suppressed area, which in turn slows down the secondary circulation. When the surface heat flux is suppressed in the inner-core region, the weakening of the secondary circulation associated with the diminished inner rainbands is limited to the inner core region, and only slightly affects the absolute angular momentum import from the outer region, thus having negligible impact on TC size. However, suppression of surface heat fluxes in the outer-core region leads to less active outer rainbands and a more substantial weakening of secondary circulation. This results in less absolute momentum import from the outer region, and in turn, a smaller TC.

The Impact of Outer-Core Surface Heat Fluxes on the Convective Activities and Rapid Intensification of Tropical Cyclones

2020 ◽  
Vol 77 (11) ◽  
pp. 3907-3927
Author(s):  
Chin-Hsuan Peng ◽  
Chun-Chieh Wu
Keyword(s):  
Inner Core ◽  
Surface Wind ◽  
Outer Core ◽  
Surface Heat ◽  
Heat Fluxes ◽  
Intensity Change ◽  
Rapid Intensification ◽  
Core Surface ◽  
Surface Heat Fluxes ◽  
The Impact

AbstractThe rapid intensification (RI) of Typhoon Soudelor (2015) is simulated using a full-physics model. To investigate how the outer-core surface heat fluxes affect tropical cyclone (TC) structure and RI processes, a series of numerical experiments are performed by suppressing surface heat fluxes between various radii. It is found that a TC would become quite weaker when the surface heat fluxes are suppressed outside the radius of 60 or 90 km [the radius of maximum surface wind in the control experiment (CTRL) at the onset of RI is roughly 60 km]. However, interestingly, the TC would experience stronger RI when the surface heat fluxes are suppressed outside the radius of 150 km. For those sensitivity experiments with capped surface heat fluxes, the members with greater intensification rate show stronger inner-core mid- to upper-level updrafts and higher heating efficiency prior to the RI periods. Although the outer-core surface heat fluxes in these members are suppressed, the inner-core winds become stronger, extracting more ocean energy from the inner core. Greater outer-core low-level stability in these members results in aggregation of deep convection and subsequent generation and concentration of potential vorticity inside the inner core, thus confining the strongest winds therein. The abovementioned findings are also supported by partial-correlation analyses, which reveal the positive correlation between the inner-core convection and subsequent 6-h intensity change, and the competition between the inner-core and outer-core convections (i.e., eyewall and outer rainbands).

Dynamic Calibration of a Coaxial Thermocouples for Short Duration Transient Measurements

2013 ◽  
Vol 135 (12) ◽  
Author(s):  
Rakesh Kumar ◽  
Niranjan Sahoo
Keyword(s):  
Heat Flux ◽  
Finite Element ◽  
Heat Conduction ◽  
Surface Heat Flux ◽  
Surface Heat ◽  
Heat Fluxes ◽  
Dynamic Calibration ◽  
One Dimensional ◽  
Surface Heat Fluxes ◽  
Heat Loads

Coaxial thermocouple sensors are suitable for measuring highly transient surface heat fluxes because the response times of these sensors are very small (∼0.1 ms). These robust sensors have the flexibility of mounting them directly on the surface of any geometry. So, they have been routinely used in ground-based impulse facilities as temperature sensors where rapid changes in heat loads are expected on aerodynamic models. Subsequently, the surface heat fluxes are predicted from the transient temperatures by appropriate one-dimensional heat conduction modeling for semi-infinite body. In this backdrop, the purpose of this work is to design and fabricate K-type coaxial thermocouples in-house and calibrate them under similar nature of heat loads by using simple laboratory instruments. Here, two methods of dynamic calibration of coaxial thermocouples have been discussed, where the known step loads are applied through radiation and conduction modes of heat transfer. Using appropriate one dimensional heat conduction modeling, the surface heat fluxes are predicted from the measured temperature histories and subsequently compared with the input heat loads. The recovery of surface heat flux from laser based calibration experiment under-predicts by 4% from its true input heat load. Similarly, recovery of surface heat flux from the conduction mode calibration experiments under-predicts 6% from its true input value. Further, finite-element based numerical study is performed on the coaxial thermocouple model to obtain surface temperatures with same heat loads as used in the experiments. The recovery of surface temperatures from finite element simulation is achieved within an accuracy of ±0.3% from the experiment.

scholarly journals Assessment of Roughness Length Schemes Implemented within the Noah Land Surface Model for High-Altitude Regions

2014 ◽  
Vol 15 (3) ◽  
pp. 921-937 ◽  
Author(s):  
Donghai Zheng ◽  
Rogier van der Velde ◽  
Zhongbo Su ◽  
Martijn J. Booij ◽  
Arjen Y. Hoekstra ◽  
...  
Keyword(s):  
Heat Flux ◽  
High Altitude ◽  
Land Surface ◽  
Land Surface Model ◽  
Surface Heat ◽  
Heat Fluxes ◽  
Surface Model ◽  
Surface Heat Fluxes ◽  
Noah Land Surface Model ◽  
Better Than

ABSTRACT Current land surface models still have difficulties with producing reliable surface heat fluxes and skin temperature (Tsfc) estimates for high-altitude regions, which may be addressed via adequate parameterization of the roughness lengths for momentum (z0m) and heat (z0h) transfer. In this study, the performance of various z0h and z0m schemes developed for the Noah land surface model is assessed for a high-altitude site (3430 m) on the northeastern part of the Tibetan Plateau. Based on the in situ surface heat fluxes and profile measurements of wind and temperature, monthly variations of z0m and diurnal variations of z0h are derived through application of the Monin–Obukhov similarity theory. These derived values together with the measured heat fluxes are utilized to assess the performance of those z0m and z0h schemes for different seasons. The analyses show that the z0m dynamics are related to vegetation dynamics and soil water freeze–thaw state, which are reproduced satisfactorily with current z0m schemes. Further, it is demonstrated that the heat flux simulations are very sensitive to the diurnal variations of z0h. The newly developed z0h schemes all capture, at least over the sparse vegetated surfaces during the winter season, the observed diurnal variability much better than the original one. It should, however, be noted that for the dense vegetated surfaces during the spring and monsoon seasons, not all newly developed schemes perform consistently better than the original one. With the most promising schemes, the Noah simulated sensible heat flux, latent heat flux, Tsfc, and soil temperature improved for the monsoon season by about 29%, 79%, 75%, and 81%, respectively. In addition, the impact of Tsfc calculation and energy balance closure associated with measurement uncertainties on the above findings are discussed, and the selection of the appropriate z0h scheme for applications is addressed.

Two- and Three-Dimensional Cloud-Resolving Model Simulations of the Mesoscale Enhancement of Surface Heat Fluxes by Precipitating Deep Convection

2006 ◽  
Vol 19 (1) ◽  
pp. 139-149 ◽  
Author(s):  
Xiaoqing Wu ◽  
Stephen Guimond
Keyword(s):  
Heat Flux ◽  
Latent Heat ◽  
Deep Convection ◽  
Three Dimensional ◽  
Surface Heat ◽  
Heat Fluxes ◽  
Total Flux ◽  
Surface Heat Fluxes ◽  
Cloud Resolving Model ◽  
2D And 3D

Abstract Two-dimensional (2D) and three-dimensional (3D) cloud-resolving model (CRM) simulations are conducted to quantify the enhancement of surface sensible and latent heat fluxes by tropical precipitating cloud systems for 20 days (10–30 December 1992) during the Tropical Ocean Global Atmosphere Coupled Ocean–Atmosphere Response Experiment (TOGA COARE). The mesoscale enhancement appears to be analogous across both 2D and 3D CRMs, with the enhancement for the sensible heat flux accounting for 17% of the total flux for each model and the enhancement for the latent heat flux representing 18% and 16% of the total flux for 2D and 3D CRMs, respectively. The convection-induced gustiness is mainly responsible for the enhancement observed in each model simulation. The parameterization schemes of the mesoscale enhancement by the gustiness in terms of convective updraft, downdraft, and precipitation, respectively, are examined using each version of the CRM. The scheme utilizing the precipitation was found to yield the most desirable estimations of the mean fluxes with the smallest rms error. The results together with previous findings from other studies suggest that the mesoscale enhancement of surface heat fluxes by the precipitating deep convection is a subgrid process apparent across various CRMs and is imperative to incorporate into general circulation models (GCMs) for improved climate simulation.

The progress on the observation and modeling of surface heat fluxes and evapotranspiration over heterogeneous landscapes of the Third Pole region

2020 ◽  
Author(s):  
Yaoming Ma
Keyword(s):  
Heat Flux ◽  
Latent Heat Flux ◽  
Land Surface ◽  
Sensible Heat Flux ◽  
Surface Heat ◽  
Heat Fluxes ◽  
Sensible Heat ◽  
Surface Heat Fluxes ◽  
The Third ◽  
Land Surface Heat Fluxes

<p>The exchange of heat and water vapor between land surface and atmosphere over the Third Pole region (Tibetan Plateau and nearby surrounding region) plays an important role in Asian monsoon, westerlies and the northern hemisphere weather and climate systems. Supported by various agencies in the People’s Republic of China, a Third Pole Environment (TPE) observation and research Platform (TPEORP) is now implementing over the Third Pole region. The background of the establishment of the TPEORP, the establishing and monitoring plan of long-term scale (5-10 years) of it will be shown firstly. Then the preliminary observational analysis results, such as the characteristics of land surface energy fluxes partitioning and the turbulent characteristics will also been shown in this study. Then, the parameterization methodology based on satellite data and the atmospheric boundary layer (ABL) observations has been proposed and tested for deriving regional distribution of net radiation flux, soil heat flux, sensible heat flux and latent heat flux (evapotranspiration (ET)) and their variation trends over the heterogeneous landscape of the Tibetan Plateau (TP) area. To validate the proposed methodology, the ground measured net radiation flux, soil heat flux, sensible heat flux and latent heat flux of the TPEORP are compared to the derived values. The results showed that the derived land surface heat fluxes over the study areas are in good accordance with the land surface status. These parameters show a wide range due to the strong contrast of surface feature. And the estimated land surface heat fluxes are in good agreement with ground measurements, and all the absolute percent difference in less than 10% in the validation sites. The sensible heat flux has increased slightly and the latent heat flux has decreased from 2001 to 2016 over the TP. It is therefore conclude that the proposed methodology is successful for the retrieval of land surface heat fluxes and ET over heterogeneous landscape of the TP area. Further improvement of the methodology and its applying field over the whole Third Pole region and Pan-Third Pole region were also discussed.</p>

scholarly journals Simulations of Processes Associated with the Fast Warming Rate of the Southern Midlatitude Ocean

2010 ◽  
Vol 23 (1) ◽  
pp. 197-206 ◽  
Author(s):  
Wenju Cai ◽  
Tim Cowan ◽  
Stuart Godfrey ◽  
Susan Wijffels
Keyword(s):  
Twentieth Century ◽  
Heat Flux ◽  
Surface Heat Flux ◽  
Heat Content ◽  
Surface Heat ◽  
Heat Fluxes ◽  
Ekman Transport ◽  
Content Increase ◽  
Intergovernmental Panel ◽  
Zonal Distribution

Abstract Significant warming has occurred across many of the world’s oceans throughout the latter part of the twentieth-century. The increase in the oceanic heat content displays a considerable spatial difference, with a maximum in the 35°–50°S midlatitude band. The relative importance of wind and surface heat flux changes in driving the warming pattern is the subject of much debate. Using wind, oceanic temperature, and heat flux outputs from twentieth-century multimodel experiments, conducted for the Fourth Assessment Report (AR4) of the Intergovernmental Panel on Climate Change (IPCC), the authors were able to reproduce the fast, deep warming in the midlatitude band; however, this warming is unable to be accounted for by local heat flux changes. The associated vertical structure and zonal distribution are consistent with a Sverdrup-type response to poleward-strengthening winds, with a poleward shift of the Southern Hemisphere (SH) supergyre and the Antarctic Circumpolar Current. However, the shift is not adiabatic and involves a net oceanic heat content increase over the SH, which can only be forced by changes in the net surface heat flux. Counterintuitively, the heat required for the fast, deep warming is largely derived from the surface heat fluxes south of 50°S, where the surface flux into the ocean is far larger than that of the midlatitude band. The heat south of 50°S is advected northward by an enhanced northward Ekman transport induced by the poleward-strengthening winds and penetrates northward and downward along the outcropping isopycnals to a depth of over 1000 m. However, because none of the models resolve eddies and given that eddy fluxes could offset the increase in the northward Ekman transport, the heat source for the fast, deep warming in the midlatitude band could be rather different in the real world.

scholarly journals Determination of land surface heat fluxes over heterogeneous landscape of the Tibetan Plateau by using the MODIS and in-situ data

2011 ◽  
Vol 11 (7) ◽  
pp. 19617-19638 ◽  
Author(s):  
Y. Ma ◽  
L. Zhong ◽  
B. Wang ◽  
W. Ma ◽  
X. Chen ◽  
...  
Keyword(s):  
Heat Flux ◽  
Tibetan Plateau ◽  
Land Surface ◽  
Surface Heat ◽  
Heat Fluxes ◽  
The Tibetan Plateau ◽  
Surface Heat Fluxes ◽  
In Situ Data ◽  
Plateau Area

Abstract. In this study, a parameterization methodology based on MODIS (Moderate Resolution Imaging Spectroradiometer) and in-situ data is proposed and tested for deriving the regional surface reflectance, surface temperature, net radiation flux, soil heat flux, sensible heat flux and latent heat flux over heterogeneous landscape. As a case study, the methodology was applied to the Tibetan Plateau area. Four images of MODIS data (30 January 2007, 15 April 2007, 1 August 2007 and 25 October 2007) were used in this study for the comparison among winter, spring, summer and autumn. The derived results were also validated by using the "ground truth" measured in the stations of the Tibetan Observation and Research Platform (TORP). The results show that the derived surface variables (surface reflectance and surface temperature) and surface heat fluxes (net radiation flux, soil heat flux, sensible heat flux and latent heat flux) in four different seasons over the Tibetan Plateau area are in good accordance with the land surface status. These parameters show a wide range due to the strong contrast of surface features over the Tibetan Plateau. Also, the estimated land surface variables and surface heat fluxes are in good agreement with the ground measurements, and all their absolute percent difference (APD) is less than 10 % in the validation sites. It is therefore concluded that the proposed methodology is successful for the retrieval of land surface variables and surface heat fluxes using the MODIS and in-situ data over the Tibetan Plateau area. The shortage and further improvement of the methodology were also discussed.

scholarly journals Extratropical cyclone induced sea surface temperature anomalies in the 2013/14 winter

2019 ◽  
Author(s):  
Helen F. Dacre ◽  
Simon A. Josey ◽  
Alan L. M. Grant
Keyword(s):  
Heat Flux ◽  
North Atlantic ◽  
Surface Heat Flux ◽  
Cold Front ◽  
Winter Season ◽  
Surface Heat ◽  
Heat Fluxes ◽  
Sea Surface ◽  
Extratropical Cyclones ◽  
Sst Cooling

Abstract. The 2013/14 winter averaged sea surface temperature (SST) was anomalously cool in the mid-North Atlantic region. This season was also unusually stormy with extratropical cyclones passing over the mid-North Atlantic every 3 days. However, the processes by which cyclones contribute towards seasonal SST anomalies are not fully understood. In this paper a cyclone identification and tracking method is combined with ECMWF atmosphere and ocean reanalysis fields to calculate cyclone-relative net surface heat flux anomalies and resulting SST changes. Anomalously large negative heat fluxes are located behind the cyclones cold front resulting in anomalous cooling up to 0.2 K/day when the cyclones are at maximum intensity. This extratropical cyclone induced cold wake extends along the cyclones cold front but is small compared to climatological variability. To investigate the potential cumulative effect of the passage of multiple cyclone induced SST cooling in the same location we calculate Earth-relative net surface heat flux anomalies and resulting SST changes for the 2013/2014 winter period. Anomalously large winter averaged negative heat fluxes occur in a zonally orientated band extending across the North Atlantic between 40–60° N. The anomaly associated with cyclones is estimated using a cyclone masking technique which encompasses each cyclone centre and its trailing cold front. North Atlantic extratropical cyclones in the 2013/14 winter season account for 78 % of the observed net surface heat flux in the mid- North Atlantic and net surface heat fluxes in the 2013/14 winter season account for 70 % of the observed cooling in the mid-North Atlantic. Thus extratropical cyclones play a major role in determining the extreme 2013/2014 winter season SST cooling.

scholarly journals Estimating surface fluxes over middle and upper streams of the Heihe River Basin with ASTER imagery

2009 ◽  
Vol 6 (3) ◽  
pp. 4619-4635 ◽  
Author(s):  
W. Ma ◽  
Y. Ma ◽  
Z. Hu ◽  
B. Su ◽  
J. Wang ◽  
...  
Keyword(s):  
Heat Flux ◽  
Land Surface ◽  
Sensible Heat Flux ◽  
Surface Heat ◽  
Surface Fluxes ◽  
Heat Fluxes ◽  
Heihe River ◽  
Surface Heat Fluxes ◽  
Aster Data ◽  
Land Surface Heat Fluxes

Abstract. Surface fluxes are important boundary conditions for climatological modeling and the Asian monsoon system. Recent availability of high-resolution, multi-band imagery from the ASTER (Advanced Space-borne Thermal Emission and Reflection Radiometer) sensor has enabled us to estimate surface fluxes to bridge the gap between local scale flux measurements using micrometeorological instruments and regional scale land-atmosphere exchanges of water and heat fluxes that are fundamental for the understanding of the water cycle in the Asian monsoon system. A Surface Energy Balance System (SEBS) method based on ASTER data and field observations has been proposed and tested for deriving net radiation flux (Rn), soil heat flux (G0), sensible heat flux (H) and latent heat flux (λ E) over heterogeneous land surface in this paper. As a case study, the methodology was applied to the experimental area of the WATER (Watershed Allied Telemetry Experimental Research), located at the mid-to-upstream sections of the Heihe River, northwest China. The ASTER data of 3 May and 4 June in 2008 was used in this paper for the case of mid-to-upstream sections of the Heihe River Basin. To validate the proposed methodology, the ground-measured land surface heat fluxes (net radiation flux (Rn), soil heat flux (G0), sensible heat flux (H) and latent heat flux (λ E)) were compared to the ASTER derived values. The results show that the derived surface variables and land surface heat fluxes in different months over the study area are in good accordance with the land surface status. It is therefore concluded that the proposed methodology is successful for the retrieval of land surface heat fluxes using the ASTER data and filed observation over the study area.

The Role of Low-Level Flow Direction on Tropical Cyclone Intensity Changes in a Moderate-Sheared Environment

2021 ◽  
Author(s):  
Tsung-Yung Lee ◽  
Chun-Chieh Wu ◽  
Rosimar Rios-Berrios
Keyword(s):  
Inner Core ◽  
Deep Layer ◽  
Surface Heat ◽  
Heat Fluxes ◽  
Background Flow ◽  
Surface Heat Fluxes ◽  
Low Level ◽  
Flow Profiles ◽  
Group Experiences ◽  
The Impact

AbstractThe impact of low-level flow (LLF) direction on the intensification of intense tropical cyclones under moderate deep-layer shear is investigated based on idealized numerical experiments. The background flow profiles are constructed by varying the LLF direction with the same moderate deep-layer shear. When the maximum surface wind speed of the simulation without background flow reaches 70 knots, the background flow profiles are imposed. After a weakening period in the first 12 h, the members with upshear-left-pointing LLF (fast-intensifying group) intensify faster between 12–24 h than those members (slow-intensifying group) with downshear-right-pointing LLF. The fast-intensifying group experiences earlier development of inner-core structures after 12 h, such as potential vorticity below the mid-troposphere, upper-level warm core, eyewall axisymmmetrization, and moist entropy gradient, while the inner-core features of the slow-intensifying group remain relatively weak and asymmetric. The FI group experiences smaller tilt increase and stronger mid-level PV ring development. The upshear-left convection during 6–12 h is responsible for the earlier development of the inner core by reducing ventilation, providing axisymmetric heating and benefiting the eyewall development. The LLF of the fast-intensifying group enhances surface heat fluxes in the downshear side, resulting in higher energy supply to the upshear-left convection from the boundary layer. In all, this study provides new insights on the impact of LLF direction on intense storms under moderate shear by modulating the surface heat fluxes and eyewall convection.

Sign in / Sign up

Export Citation Format

Share Document