A Multimoment Bulk Microphysics Parameterization. Part III: Control Simulation of a Hailstorm

2006 ◽  
Vol 63 (12) ◽  
pp. 3114-3136 ◽  
Author(s):  
J. A. Milbrandt ◽  
M. K. Yau
Keyword(s):  
Size Distribution ◽  
Prediction Models ◽  
Mesoscale Model ◽  
Weather Prediction ◽  
Cloud Microphysics ◽  
Added Value ◽  
Relative Dispersion ◽  
Continuous Increase ◽  
Surface Precipitation ◽  
Additional Information

With continuous increase in the resolution of operational numerical weather prediction models, grid-scale saturation schemes that model cloud microphysics are becoming increasingly important. In Parts I and II of this study, the importance of the relative dispersion of the hydrometeor size distribution in bulk microphysics parameterizations was demonstrated and a closure approach for a three-moment scheme was proposed. In this paper, the full three-moment version of the new multimoment scheme is tested in a 3D simulation of a severe hailstorm. The modeled microphysical fields are examined, with particular attention paid to the simulated hail fields including the maximum hail sizes at the ground. A mesoscale model was initialized using synoptic analyses and successively nested to a resolution of 1 km. When compared to observations of the real storm from a nearby radar, the simulated storm reproduced several of the observed characteristics including the direction and speed of propagation, a bounded weak echo region, hook echo, mesocyclone, and a suspended overhang region. The magnitudes of radar reflectivity and surface precipitation are also well simulated. The mass contents, total number concentrations, equivalent reflectivities, and mean mass diameters of each hydrometeor category in the model were examined. The spatial distributions of the various hydrometeors throughout the storm appeared realistic and their values were consistent with published observations from other storms. Using the three predicted parameters of the gamma size distribution for hail, a method was introduced to determine the maximum hail size simulated from a bulk scheme that is physically observable. The observed storm produced golf ball–sized hail while the simulation produced walnut-sized hail at approximately the same time and location. The results suggest that because of the additional information provided about the size distribution, there is added value in prognosing the relative dispersion parameter of a given hydrometeor category in a bulk scheme.

Temporal Changes in Wind as Objects for Evaluating Mesoscale Numerical Weather Prediction

2009 ◽  
Vol 24 (5) ◽  
pp. 1374-1389 ◽  
Author(s):  
Daran L. Rife ◽  
Christopher A. Davis ◽  
Jason C. Knievel
Keyword(s):  
Numerical Weather Prediction ◽  
Prediction Models ◽  
Mesoscale Model ◽  
Weather Prediction ◽  
Grid Point ◽  
Surface Wind ◽  
Temporal Changes ◽  
High Temporal Resolution ◽  
Numerical Weather ◽  
Wind Events

Abstract The study describes a method of evaluating numerical weather prediction models by comparing the characteristics of temporal changes in simulated and observed 10-m (AGL) winds. The method is demonstrated on a 1-yr collection of 1-day simulations by the fifth-generation Pennsylvania State University–National Center for Atmospheric Research Mesoscale Model (MM5) over southern New Mexico. Temporal objects, or wind events, are defined at the observation locations and at each grid point in the model domain as vector wind changes over 2 h. Changes above the uppermost quartile of the distributions in the observations and simulations are empirically classified as significant; their attributes are analyzed and interpreted. It is demonstrated that the model can discriminate between large and modest wind changes on a pointwise basis, suggesting that many forecast events have an observational counterpart. Spatial clusters of significant wind events are highly continuous in space and time. Such continuity suggests that displaying maps of surface wind changes with high temporal resolution can alert forecasters to the occurrence of important phenomena. Documented systematic errors in the amplitude, direction, and timing of wind events will allow forecasters to mentally adjust for biases in features forecast by the model.

scholarly journals Development of a hybrid variational-ensemble data assimilation technique for observed lightning tested in a mesoscale model

2014 ◽  
Vol 21 (5) ◽  
pp. 1027-1041 ◽  
Author(s):  
K. Apodaca ◽  
M. Zupanski ◽  
M. DeMaria ◽  
J. A. Knaff ◽  
L. D. Grasso
Keyword(s):  
Data Assimilation ◽  
Prediction Models ◽  
Mesoscale Model ◽  
Initial Conditions ◽  
Positive Impact ◽  
Weather Prediction ◽  
New Information ◽  
Forecasting System ◽  
Maximum Likelihood Ensemble Filter ◽  
The Impact

Abstract. Lightning measurements from the Geostationary Lightning Mapper (GLM) that will be aboard the Geostationary Operational Environmental Satellite – R Series will bring new information that can have the potential for improving the initialization of numerical weather prediction models by assisting in the detection of clouds and convection through data assimilation. In this study we focus on investigating the utility of lightning observations in mesoscale and regional applications suitable for current operational environments, in which convection cannot be explicitly resolved. Therefore, we examine the impact of lightning observations on storm environment. Preliminary steps in developing a lightning data assimilation capability suitable for mesoscale modeling are presented in this paper. World Wide Lightning Location Network (WWLLN) data was utilized as a proxy for GLM measurements and was assimilated with the Maximum Likelihood Ensemble Filter, interfaced with the Nonhydrostatic Mesoscale Model core of the Weather Research and Forecasting system (WRF-NMM). In order to test this methodology, regional data assimilation experiments were conducted. Results indicate that lightning data assimilation had a positive impact on the following: information content, influencing several dynamical variables in the model (e.g., moisture, temperature, and winds), and improving initial conditions during several data assimilation cycles. However, the 6 h forecast after the assimilation did not show a clear improvement in terms of root mean square (RMS) errors.

scholarly journals Aerosol–Cloud Interaction in Deep Convective Clouds over the Indian Peninsula Using Spectral (Bin) Microphysics

2017 ◽  
Vol 74 (10) ◽  
pp. 3145-3166 ◽  
Author(s):  
K. Gayatri ◽  
S. Patade ◽  
T. V. Prabha
Keyword(s):  
Size Distribution ◽  
Cloud Condensation Nuclei ◽  
Wrf Model ◽  
Cloud Droplet ◽  
Liquid Water Content ◽  
Cloud Microphysics ◽  
Large Area ◽  
Surface Precipitation ◽  
Aerosol Cloud ◽  
Bin Microphysics

Abstract The Weather Research and Forecasting (WRF) Model coupled with a spectral bin microphysics (SBM) scheme is used to investigate aerosol effects on cloud microphysics and precipitation over the Indian peninsular region. The main emphasis of the study is in comparing simulated cloud microphysical structure with in situ aircraft observations from the Cloud Aerosol Interaction and Precipitation Enhancement Experiment (CAIPEEX). Aerosol–cloud interaction over the rain-shadow region is investigated with observed and simulated size distribution spectra of cloud droplets and ice particles in monsoon clouds. It is shown that size distributions as well as other microphysical characteristics obtained from simulations such as liquid water content, cloud droplet effective radius, cloud droplet number concentration, and thermodynamic parameters are in good agreement with the observations. It is seen that in clouds with high cloud condensation nuclei (CCN) concentrations, snow and graupel size distribution spectra were broader compared to clouds with low concentrations of CCN, mainly because of enhanced riming in the presence of a large number of droplets with a diameter of 10–30 μm. The Hallett–Mossop ice multiplication process is illustrated to have an impact on snow and graupel mass. The changes in CCN concentrations have a strong effect on cloud properties over the domain, amounts of cloud water, and the glaciation of the clouds, but the effects on surface precipitation are small when averaged over a large area. Overall enhancement of cold-phase cloud processes in the high-CCN case contributed to slight enhancement (5%) in domain-averaged surface precipitation.

scholarly journals Sensitivity of Cloud-Resolving Simulations of Warm-Season Convection to Cloud Microphysics Parameterizations

2007 ◽  
Vol 135 (8) ◽  
pp. 2854-2868 ◽  
Author(s):  
Changhai Liu ◽  
Mitchell W. Moncrieff
Keyword(s):  
Large Scale ◽  
Prediction Models ◽  
Weather Prediction ◽  
Warm Season ◽  
Cloud Microphysics ◽  
Mixed Phase ◽  
Fine Grid ◽  
Upper Level ◽  
Heating Profiles ◽  
Microphysical Parameterization

Abstract This paper investigates the effects of cloud microphysics parameterizations on simulations of warm-season precipitation at convection-permitting grid spacing. The objective is to assess the sensitivity of summertime convection predictions to the bulk microphysics parameterizations (BMPs) at fine-grid spacings applicable to the next generation of operational numerical weather prediction models. Four microphysical parameterization schemes are compared: simple ice (Dudhia), four-class mixed phase (Reisner et al.), Goddard five-class mixed phase (Tao and Simpson), and five-class mixed phase with graupel (Reisner et al.). The experimentation involves a 7-day episode (3–9 July 2003) of U.S. midsummer convection under moderate large-scale forcing. Overall, the precipitation coherency manifested as eastward-moving organized convection in the lee of the Rockies is insensitive to the choice of the microphysics schemes, and the latent heating profiles are also largely comparable among the BMPs. The upper-level condensate and cloudiness, upper-level radiative cooling/heating, and rainfall spectrum are the most sensitive, whereas the domain-mean rainfall rate and areal coverage display moderate sensitivity. Overall, the three mixed-phase schemes outperform the simple ice scheme, but a general conclusion about the degree of sophistication in the microphysics treatment and the performance is not achievable.

scholarly journals Storm-Based Probabilistic Hail Forecasting with Machine Learning Applied to Convection-Allowing Ensembles

2017 ◽  
Vol 32 (5) ◽  
pp. 1819-1840 ◽  
Author(s):  
David John Gagne ◽  
Amy McGovern ◽  
Sue Ellen Haupt ◽  
Ryan A. Sobash ◽  
John K. Williams ◽  
...  
Keyword(s):  
Machine Learning ◽  
Size Distribution ◽  
Prediction Models ◽  
Weather Prediction ◽  
Radar Data ◽  
Object Identification ◽  
Atmospheric Conditions ◽  
Learning Models ◽  
Probabilistic Machine Learning ◽  
Machine Learning Models

Abstract Forecasting severe hail accurately requires predicting how well atmospheric conditions support the development of thunderstorms, the growth of large hail, and the minimal loss of hail mass to melting before reaching the surface. Existing hail forecasting techniques incorporate information about these processes from proximity soundings and numerical weather prediction models, but they make many simplifying assumptions, are sensitive to differences in numerical model configuration, and are often not calibrated to observations. In this paper a storm-based probabilistic machine learning hail forecasting method is developed to overcome the deficiencies of existing methods. An object identification and tracking algorithm locates potential hailstorms in convection-allowing model output and gridded radar data. Forecast storms are matched with observed storms to determine hail occurrence and the parameters of the radar-estimated hail size distribution. The database of forecast storms contains information about storm properties and the conditions of the prestorm environment. Machine learning models are used to synthesize that information to predict the probability of a storm producing hail and the radar-estimated hail size distribution parameters for each forecast storm. Forecasts from the machine learning models are produced using two convection-allowing ensemble systems and the results are compared to other hail forecasting methods. The machine learning forecasts have a higher critical success index (CSI) at most probability thresholds and greater reliability for predicting both severe and significant hail.

scholarly journals Hybrid variational-ensemble assimilation of lightning observations in a mesoscale model

2014 ◽  
Vol 1 (1) ◽  
pp. 917-952
Author(s):  
K. Apodaca ◽  
M. Zupanski ◽  
M. DeMaria ◽  
J. A. Knaff ◽  
L. D. Grasso
Keyword(s):  
Data Assimilation ◽  
Prediction Models ◽  
Mesoscale Model ◽  
Initial Conditions ◽  
Positive Impact ◽  
Weather Prediction ◽  
New Information ◽  
Forecasting System ◽  
Maximum Likelihood Ensemble Filter ◽  
The Impact

Abstract. Lightning measurements from the Geostationary Lightning Mapper (GLM) that will be aboard the Goestationary Operational Environmental Satellite – R Series will bring new information that can have the potential for improving the initialization of numerical weather prediction models by assisting in the detection of clouds and convection through data assimilation. In this study we focus on investigating the utility of lightning observations in mesoscale and regional applications suitable for current operational environments, in which convection cannot be explicitly resolved. Therefore, we examine the impact of lightning observations on storm environment. Preliminary steps in developing a lightning data assimilation capability suitable for mesoscale modeling are presented in this paper. World Wide Lightning Location Network (WWLLN) data was utilized as a proxy for GLM measurements and was assimilated with the Maximum Likelihood Ensemble Filter, interfaced with the Nonhydrostatic Mesoscale Model core of the Weather Research and Forecasting system (WRF-NMM). In order to test this methodology, regional data assimilation experiments were conducted. Results indicate that lightning data assimilation had a positive impact on the following: information content, influencing several dynamical variables in the model (e.g., moisture, temperature, and winds), improving initial conditions, and partially improving WRF-NMM forecasts during several data assimilation cycles.

scholarly journals A New Visibility Parameterization for Warm-Fog Applications in Numerical Weather Prediction Models

2006 ◽  
Vol 45 (11) ◽  
pp. 1469-1480 ◽  
Author(s):  
I. Gultepe ◽  
M. D. Müller ◽  
Z. Boybeyi
Keyword(s):  
Numerical Weather Prediction ◽  
Prediction Models ◽  
Mesoscale Model ◽  
Weather Prediction ◽  
Liquid Water Content ◽  
Parameterization Scheme ◽  
Numerical Weather ◽  
Time Period ◽  
Simulation Domain ◽  
Forecast Models

Abstract The objective of this work is to suggest a new warm-fog visibility parameterization scheme for numerical weather prediction (NWP) models. In situ observations collected during the Radiation and Aerosol Cloud Experiment, representing boundary layer low-level clouds, were used to develop a parameterization scheme between visibility and a combined parameter as a function of both droplet number concentration Nd and liquid water content (LWC). The current NWP models usually use relationships between extinction coefficient and LWC. A newly developed parameterization scheme for visibility, Vis = f (LWC, Nd), is applied to the NOAA Nonhydrostatic Mesoscale Model. In this model, the microphysics of fog was adapted from the 1D Parameterized Fog (PAFOG) model and then was used in the lower 1.5 km of the atmosphere. Simulations for testing the new parameterization scheme are performed in a 50-km innermost-nested simulation domain using a horizontal grid spacing of 1 km centered on Zurich Unique Airport in Switzerland. The simulations over a 10-h time period showed that visibility differences between old and new parameterization schemes can be more than 50%. It is concluded that accurate visibility estimates require skillful LWC as well as Nd estimates from forecasts. Therefore, the current models can significantly over-/underestimate Vis (with more than 50% uncertainty) depending on environmental conditions. Inclusion of Nd as a prognostic (or parameterized) variable in parameterizations would significantly improve the operational forecast models.

Evaluating Convective Initiation in High-Resolution Numerical Weather Prediction Models Using GOES-16 Infrared Brightness Temperatures

2021 ◽  
Vol 149 (4) ◽  
pp. 1153-1172
Author(s):  
David S. Henderson ◽  
Jason A. Otkin ◽  
John R. Mecikalski
Keyword(s):  
High Resolution ◽  
Prediction Models ◽  
Weather Prediction ◽  
Cloud Microphysics ◽  
Cloud Water ◽  
Convective Initiation ◽  
Model Simulations ◽  
Brightness Temperatures ◽  
Cloud Characteristics ◽  
Verification Methods

AbstractThe evolution of model-based cloud-top brightness temperatures (BT) associated with convective initiation (CI) is assessed for three bulk cloud microphysics schemes in the Weather Research and Forecasting Model. Using a composite-based analysis, cloud objects derived from high-resolution (500 m) model simulations are compared to 5-min GOES-16 imagery for a case study day located near the Alabama–Mississippi border. Observed and simulated cloud characteristics for clouds reaching CI are examined by utilizing infrared BTs commonly used in satellite-based CI nowcasting methods. The results demonstrate the ability of object-based verification methods with satellite observations to evaluate the evolution of model cloud characteristics, and the BT comparison provides insight into a known issue of model simulations producing too many convective cells reaching CI. The timing of CI from the different microphysical schemes is dependent on the production of ice in the upper levels of the cloud, which typically occurs near the time of maximum cloud growth. In particular, large differences in precipitation formation drive differences in the amount of cloud water able to reach upper layers of the cloud, which impacts cloud-top glaciation. Larger cloud mixing ratios are found in clouds with sustained growth leading to more cloud water lofted to the upper levels of the cloud and the formation of ice. Clouds unable to sustain growth lack the necessary cloud water needed to form ice and grow into cumulonimbus. Clouds with slower growth rates display similar BT trends as clouds exhibiting growth, which suggests that forecasting CI using geostationary satellites might require additional information beyond those derived at cloud top.

Convection is key to better polar low forecasts

2020 ◽  
Author(s):  
Matilda Hallerstig ◽  
Linus Magnusson ◽  
Erik Kolstad
Keyword(s):  
Prediction Models ◽  
Deterministic Model ◽  
Rapid Development ◽  
Weather Prediction ◽  
Model Performance ◽  
Horizontal Resolution ◽  
Added Value ◽  
Grid Spacing ◽  
Polar Lows ◽  
Polar Low

<p>ECMWF HRES and Arome Arctic are the operational Numerical Weather Prediction models that forecasters in northern Norway use to predict Polar lows in the Nordic and Barents Seas. These type of lows are small, but intense mesoscale cyclones with strong, gusty winds and heavy snow showers. They cause hazards like icing, turbulence, high waves and avalanches that threaten offshore activity and coastal societies in the area. Due to their small size and rapid development, medium range global models with coarser resolutions such as ECMWF have not been able to represent them properly. This was only possible with short range high resolution regional models like Arome. When ECMWF introduced their new HRES deterministic model with 9 km grid spacing, the potential for more precise polar low forecasts increased. Here we use case studies and sensitivity tests to examine the ability of ECMWF HRES to represent polar lows. We also evaluate what added value the Arome Arctic model with 2.5 km grid spacing gives. For verification, we use coastal meteorological stations and scatterometer winds. We found that convection has a greater impact on model performance than horizontal resolution. We also see that Arome Arctic produces higher wind speeds than ECMWF HRES. To improve performance during polar lows for models with a horizontal grid spacing less than 10 km, it is therefore more important to improve the understanding and formulation of convective processes rather than simply increasing horizontal resolution.</p>

scholarly journals Comparative Analysis of the Local Observation-Based (LOB) Method and the Nonparametric Regression-Based Method for Gridded Bias Correction in Mesoscale Weather Forecasting

2007 ◽  
Vol 22 (6) ◽  
pp. 1243-1256 ◽  
Author(s):  
Yulia R. Gel
Keyword(s):  
Comparative Analysis ◽  
Pacific Northwest ◽  
Bias Correction ◽  
Prediction Models ◽  
Weather Forecasting ◽  
Time Window ◽  
Mesoscale Model ◽  
Weather Prediction ◽  
Local Observation ◽  
A Site

Abstract The comparative analysis of three methods for objective grid-based bias removal in mesoscale numerical weather prediction models is considered. The first technique is the local observation-based (LOB) method that extends further the approaches of several recent studies and is focused on utilizing the information obtained from meteorological stations or neighbor grid points in the proximity of a site of interest. The bias at a site of interest might then be considered as a spatiotemporal function of the weighted information on the past biases observed in the cluster of neighbors during a certain time window. The second method is an extension of model output statistics (MOS), combining several modern multiple regression techniques such as the classification and regression trees (CARTs) and the alternative conditional expectation (ACE) and, therefore, is named the CART–ACE method. The CART–ACE method allows representing possible nonlinear aspects of the bias in a parsimonious linearized statistical model. Finally, the third considered method is a natural combination of the LOB and CART–ACE methods in which the information provided by the LOB method is interpreted as an extra predictor in the regression model of the CART–ACE method. The proposed methods are illustrated by a case study of an observation-based verification and bias correction of fifth-generation Pennsylvania State University–National Center for Atmospheric Research Mesoscale Model (MM5) 48-h surface temperature, that is, 2-m temperature, forecasts over the Pacific Northwest.

Sign in / Sign up

Export Citation Format

Share Document