scholarly journals Use of Ensemble Forecasts to Investigate Synoptic Influences on the Structural Evolution and Predictability of Hurricane Alex (2016) in the Midlatitudes

2018 ◽  
Vol 146 (10) ◽  
pp. 3143-3162 ◽  
Author(s):  
Juan Jesús González-Alemán ◽  
Jenni L. Evans ◽  
Alex M. Kowaleski

Abstract Hurricane Alex was an extremely rare hurricane event, the first North Atlantic hurricane to form in January since 1938. Alex developed from an extratropical low pressure system that formed over the western North Atlantic basin, and then underwent tropical transition after moving to the eastern basin. It subsequently underwent anomalous extratropical transition (ET) just north of the Azores Islands. We examine the factors affecting Alex’s structural evolution and the predictability of that evolution. Potential scenarios of structural development are identified from a 51-member forecast ensemble from the European Centre for Medium-Range Weather Forecasts Ensemble Prediction System (ECMWF-EPS), initialized at 0000 UTC 10 January 2016. The EPS forecasts are clustered using a regression mixture model based on the storm’s path through the cyclone phase space. Composite maps constructed from these clusters are used to investigate the role of synoptic-scale features on the evolving structure of Hurricane Alex as it interacted with the midlatitude flow. Results suggest that the crucial factor affecting this interplay was the behavior of a large extratropical cyclone and its associated cold front and likely warm conveyor belt upstream of Alex; the intensity of these structures determined whether Alex underwent a typical cold-core ET (as observed) or a warm-seclusion ET. The clustering and compositing methodology proposed not only provides a nuanced analysis of the ensemble forecast variability, helping forecasters to analyze the predictability of future complex tropical–midlatitude interactions, but also presents a method to investigate probable causes of different processes occurring in cyclones.

2015 ◽  
Vol 8 (7) ◽  
pp. 2355-2377 ◽  
Author(s):  
M. Rautenhaus ◽  
C. M. Grams ◽  
A. Schäfler ◽  
R. Westermann

Abstract. We present the application of interactive three-dimensional (3-D) visualization of ensemble weather predictions to forecasting warm conveyor belt situations during aircraft-based atmospheric research campaigns. Motivated by forecast requirements of the T-NAWDEX-Falcon 2012 (THORPEX – North Atlantic Waveguide and Downstream Impact Experiment) campaign, a method to predict 3-D probabilities of the spatial occurrence of warm conveyor belts (WCBs) has been developed. Probabilities are derived from Lagrangian particle trajectories computed on the forecast wind fields of the European Centre for Medium Range Weather Forecasts (ECMWF) ensemble prediction system. Integration of the method into the 3-D ensemble visualization tool Met.3D, introduced in the first part of this study, facilitates interactive visualization of WCB features and derived probabilities in the context of the ECMWF ensemble forecast. We investigate the sensitivity of the method with respect to trajectory seeding and grid spacing of the forecast wind field. Furthermore, we propose a visual analysis method to quantitatively analyse the contribution of ensemble members to a probability region and, thus, to assist the forecaster in interpreting the obtained probabilities. A case study, revisiting a forecast case from T-NAWDEX-Falcon, illustrates the practical application of Met.3D and demonstrates the use of 3-D and uncertainty visualization for weather forecasting and for planning flight routes in the medium forecast range (3 to 7 days before take-off).


2019 ◽  
Vol 34 (3) ◽  
pp. 617-634 ◽  
Author(s):  
Maxime Taillardat ◽  
Anne-Laure Fougères ◽  
Philippe Naveau ◽  
Olivier Mestre

Abstract To satisfy a wide range of end users, rainfall ensemble forecasts have to be skillful for both low precipitation and extreme events. We introduce local statistical postprocessing methods based on quantile regression forests and gradient forests with a semiparametric extension for heavy-tailed distributions. These hybrid methods make use of the forest-based outputs to fit a parametric distribution that is suitable to model jointly low, medium, and heavy rainfall intensities. Our goal is to improve ensemble quality and value for all rainfall intensities. The proposed methods are applied to daily 51-h forecasts of 6-h accumulated precipitation from 2012 to 2015 over France using the Météo-France ensemble prediction system called Prévision d’Ensemble ARPEGE (PEARP). They are verified with a cross-validation strategy and compete favorably with state-of-the-art methods like analog ensemble or ensemble model output statistics. Our methods do not assume any parametric links between the variables to calibrate and possible covariates. They do not require any variable selection step and can make use of more than 60 predictors available such as summary statistics on the raw ensemble, deterministic forecasts of other parameters of interest, or probabilities of convective rainfall. In addition to improvements in overall performance, hybrid forest-based procedures produced the largest skill improvements for forecasting heavy rainfall events.


2003 ◽  
Vol 10 (6) ◽  
pp. 463-468 ◽  
Author(s):  
G. Pellerin ◽  
L. Lefaivre ◽  
P. Houtekamer ◽  
C. Girard

Abstract. Ensemble forecasts are run operationally since February 1998 at the Canadian Meteorological Centre, with outputs up to ten days. The ensemble size was increased from eight to sixteen members in August 1999. The method of producing the perturbed analyses consists of running independent assimilation cycles that use perturbed sets of observations and are driven by eight different models, mainly different in their physical parameterizations. Perturbed analyses are doubled by taking opposite pairs. A multi-model approach is then used to obtain the forecasts. The ensemble output has been used to generate several products. In view of increasing computing facilities, the ensemble prediction system horizontal resolution was increased to TL149 in June 2001. Heights at 500 hPa and mean sea-level pressure maps are regularly used. Charts of precipitation with the probability of precipitation being above various thresholds are also produced at each run. The probabilistic forecast of the 24-h accumulated precipitation has shown skill as demonstrated by the relative operating characteristic (ROC). Verifications of the ensemble forecasts will be presented.


2013 ◽  
Vol 26 (19) ◽  
pp. 7525-7540 ◽  
Author(s):  
Øyvind Breivik ◽  
Ole Johan Aarnes ◽  
Jean-Raymond Bidlot ◽  
Ana Carrasco ◽  
Øyvind Saetra

Abstract A method for estimating return values from ensembles of forecasts at advanced lead times is presented. Return values of significant wave height in the northeast Atlantic, the Norwegian Sea, and the North Sea are computed from archived +240-h forecasts of the ECMWF Ensemble Prediction System (EPS) from 1999 to 2009. Three assumptions are made: First, each forecast is representative of a 6-h interval and collectively the dataset is then comparable to a time period of 226 years. Second, the model climate matches the observed distribution, which is confirmed by comparing with buoy data. Third, the ensemble members are sufficiently uncorrelated to be considered independent realizations of the model climate. Anomaly correlations of 0.20 are found, but peak events (>P97) are entirely uncorrelated. By comparing return values from individual members with return values of subsamples of the dataset it is also found that the estimates follow the same distribution and appear unaffected by correlations in the ensemble. The annual mean and variance over the 11-yr archived period exhibit no significant departures from stationarity compared with a recent reforecast; that is, there is no spurious trend because of model upgrades. The EPS yields significantly higher return values than the 40-yr ECMWF Re-Analysis (ERA-40) and ECMWF Interim Re-Analysis (ERA-Interim) and is in good agreement with the high-resolution 10-km Norwegian Reanalyses (NORA10) hindcast, except in the lee of unresolved islands where EPS overestimates and in enclosed seas where it has low bias. Confidence intervals are half the width of those found for ERA-Interim because of the magnitude of the dataset.


2003 ◽  
Vol 10 (3) ◽  
pp. 261-274 ◽  
Author(s):  
A. Montani ◽  
C. Marsigli ◽  
F. Nerozzi ◽  
T. Paccagnella ◽  
S. Tibaldi ◽  
...  

Abstract. The predictability of the flood event affecting Soverato (Southern Italy) in September 2000 is investigated by considering three different configurations of ECMWF ensemble: the operational Ensemble Prediction System (EPS), the targeted EPS and a high-resolution version of EPS. For each configuration, three successive runs of ECMWF ensemble with the same verification time are grouped together so as to generate a highly-populated "super-ensemble". Then, five members are selected from the super-ensemble and used to provide initial and boundary conditions for the integrations with a limited-area model, whose runs generate a Limited-area Ensemble Prediction System (LEPS). The relative impact of targeting the initial perturbations against increasing the horizontal resolution is assessed for the global ensembles as well as for the properties transferred to LEPS integrations, the attention being focussed on the probabilistic prediction of rainfall over a localised area. At the 108, 84 and 60- hour forecast ranges, the overall performance of the global ensembles is not particularly accurate and the best results are obtained by the high-resolution version of EPS. The LEPS performance is very satisfactory in all configurations and the rainfall maps show probability peaks in the correct regions. LEPS products would have been of great assistance to issue flood risk alerts on the basis of limited-area ensemble forecasts. For the 60-hour forecast range, the sensitivity of the results to the LEPS ensemble size is discussed by comparing a 5-member against a 51-member LEPS, where the limited-area model is nested on all EPS members. Little sensitivity is found as concerns the detection of the regions most likely affected by heavy precipitation, the probability peaks being approximately the same in both configurations.


2011 ◽  
Vol 139 (10) ◽  
pp. 3243-3247 ◽  
Author(s):  
Thomas M. Hamill ◽  
Jeffrey S. Whitaker ◽  
Daryl T. Kleist ◽  
Michael Fiorino ◽  
Stanley G. Benjamin

Abstract Experimental ensemble predictions of tropical cyclone (TC) tracks from the ensemble Kalman filter (EnKF) using the Global Forecast System (GFS) model were recently validated for the 2009 Northern Hemisphere hurricane season by Hamill et al. A similar suite of tests is described here for the 2010 season. Two major changes were made this season: 1) a reduction in the resolution of the GFS model, from 2009’s T384L64 (~31 km at 25°N) to 2010’s T254L64 (~47 km at 25°N), and some changes in model physics; and 2) the addition of a limited test of deterministic forecasts initialized from a hybrid three-dimensional variational data assimilation (3D-Var)/EnKF method. The GFS/EnKF ensembles continued to produce reduced track errors relative to operational ensemble forecasts created by the National Centers for Environmental Prediction (NCEP), the Met Office (UKMO), and the Canadian Meteorological Centre (CMC). The GFS/EnKF was not uniformly as skillful as the European Centre for Medium-Range Weather Forecasts (ECMWF) ensemble prediction system. GFS/EnKF track forecasts had slightly higher error than ECMWF at longer leads, especially in the western North Pacific, and exhibited poorer calibration between spread and error than in 2009, perhaps in part because of lower model resolution. Deterministic forecasts from the hybrid were competitive with deterministic EnKF ensemble-mean forecasts and superior in track error to those initialized from the operational variational algorithm, the Gridpoint Statistical Interpolation (GSI). Pending further successful testing, the National Oceanic and Atmospheric Administration (NOAA) intends to implement the global hybrid system operationally for data assimilation.


2017 ◽  
Vol 32 (3) ◽  
pp. 1041-1056 ◽  
Author(s):  
Roderick van der Linden ◽  
Andreas H. Fink ◽  
Joaquim G. Pinto ◽  
Tan Phan-Van

Abstract A record-breaking rainfall event occurred in northeastern Vietnam in late July–early August 2015. The coastal region in Quang Ninh Province was hit severely, with station rainfall sums in the range of 1000–1500 mm. The heavy rainfall led to flooding and landslides, which resulted in an estimated economic loss of $108 million (U.S. dollars) and 32 fatalities. Using a multitude of data sources and ECMWF ensemble forecasts, the synoptic–dynamic development and practical predictability of the event is investigated in detail for the 4-day period from 1200 UTC 25 July to 1200 UTC 29 July 2015, during which the major portion of the rainfall was observed. A slowly moving upper-level subtropical trough and the associated surface low in the northern Gulf of Tonkin promoted sustained moisture convergence and convection over northeastern Vietnam. The humidity was advected in a moisture transport band lying across the Indochina Peninsula and emanating from a tropical storm over the Bay of Bengal. Analyses of the ECMWF ensemble forecasts clearly showed a sudden emergence of the predictability of the extreme event at lead times of 3 days that was associated with the correct forecasts of the intensity and location of the subtropical trough in the 51 ensemble members. Thus, the Quang Ninh event is a good example in which the predictability of tropical convection arises from large-scale synoptic forcing; in the present case it was due to a tropical–extratropical interaction that has not been documented before for the region and season.


2008 ◽  
Vol 23 (4) ◽  
pp. 557-574 ◽  
Author(s):  
Doug McCollor ◽  
Roland Stull

Abstract Two economic models are employed to perform a value assessment of short-range ensemble forecasts of 24-h precipitation probabilities for hydroelectric reservoir operation. Using a static cost–loss model, the value of the probability information is compared to the values of a deterministic control high-resolution forecast and of an ensemble-average forecast for forecast days 1 and 2. It is found that the probabilistic ensemble forecast provides value to a much wider range of hydroelectric operators than either the deterministic high-resolution forecast or the ensemble-average forecast, although for a small subset of operators the value of the three forecasts is the same. Forecasts for day-1 precipitation provide measurably higher value than forecasts for day-2 precipitation because of the loss of skill in the longer-range forecasts. A decision theory model provides a continuous-variable weighting of a user-specific utility function. The utility function weights are supplied by the ensemble prediction system, and the outcome is compared with weights calculated from a deterministic model, from the ensemble average, and from climatology. It is found that the methods employing the full ensemble and the ensemble average outperform the single deterministic model and climatology for the hydroelectric reservoir scenario studied.


2010 ◽  
Vol 138 (10) ◽  
pp. 3886-3904 ◽  
Author(s):  
Mark Buehner ◽  
Ahmed Mahidjiba

Abstract This study examines the sensitivity of global ensemble forecasts to the use of different approaches for specifying both the initial ensemble mean and perturbations. The current operational ensemble prediction system of the Meteorological Service of Canada uses the ensemble Kalman filter (EnKF) to define both the ensemble mean and perturbations. To evaluate the impact of different approaches for obtaining the initial ensemble perturbations, the operational EnKF approach is compared with using either no initial perturbations or perturbations obtained using singular vectors (SVs). The SVs are computed using the (dry) total-energy norm with a 48-h optimization time interval. Random linear combinations of 60 SVs are computed for each of three regions. Next, the impact of replacing the initial ensemble mean, currently the EnKF ensemble mean analysis, with the higher-resolution operational four-dimensional variational data assimilation (4D-Var) analysis is evaluated. For this comparison, perturbations are provided by the EnKF. All experiments are performed over two-month periods during both the boreal summer and winter using a system very similar to the global ensemble prediction system that became operational on 10 July 2007. Relative to the operational configuration that relies on the EnKF, the use of SVs to compute initial perturbations produces small, but statistically significant differences in probabilistic forecast scores in favor of the EnKF both in the tropics and, for a limited set of forecast lead times, in the summer hemisphere extratropics, whereas the results are very similar in the winter hemisphere extratropics. Both approaches lead to significantly better ensemble forecasts than with no initial perturbations, though results are quite similar in the tropics when using SVs and no perturbations. The use of an initial-time norm that does not include information on analysis uncertainty and the lack of linearized moist processes in the calculation of the SVs are two factors that limit the quality of the resulting SV-based ensemble forecasts. Relative to the operational configuration, use of the 4D-Var analysis to specify the initial ensemble mean results in improved probabilistic forecast scores during the boreal summer period in the southern extratropics and tropics, but a near-neutral impact otherwise.


2020 ◽  
Vol 27 (2) ◽  
pp. 329-347 ◽  
Author(s):  
Maxime Taillardat ◽  
Olivier Mestre

Abstract. Statistical post-processing of ensemble forecasts, from simple linear regressions to more sophisticated techniques, is now a well-known procedure for correcting biased and poorly dispersed ensemble weather predictions. However, practical applications in national weather services are still in their infancy compared to deterministic post-processing. This paper presents two different applications of ensemble post-processing using machine learning at an industrial scale. The first is a station-based post-processing of surface temperature and subsequent interpolation to a grid in a medium-resolution ensemble system. The second is a gridded post-processing of hourly rainfall amounts in a high-resolution ensemble prediction system. The techniques used rely on quantile regression forests (QRFs) and ensemble copula coupling (ECC), chosen for their robustness and simplicity of training regardless of the variable subject to calibration. Moreover, some variants of classical techniques used, such as QRF and ECC, were developed in order to adjust to operational constraints. A forecast anomaly-based QRF is used for temperature for a better prediction of cold and heat waves. A variant of ECC for hourly rainfall was built, accounting for more realistic longer rainfall accumulations. We show that both forecast quality and forecast value are improved compared to the raw ensemble. Finally, comments about model size and computation time are made.


Sign in / Sign up

Export Citation Format

Share Document