Nipple Localization in Automated Whole Breast Ultrasound Coronal Scans Using Ensemble Learning

2020 ◽  
Vol 43 (1) ◽  
pp. 29-45
Author(s):  
Alex Noel Joseph Raj ◽  
Ruban Nersisson ◽  
Vijayalakshmi G. V. Mahesh ◽  
Zhemin Zhuang
Keyword(s):  
Texture Features ◽  
Breast Ultrasound ◽  
Support Vector ◽  
Ultrasound Images ◽  
Shadow Area ◽  
Hu Moments ◽  
Artificial Neural Network Ann ◽  
Cade System ◽  
Occurrence Matrix ◽  
Shape Complexity

Nipple is a vital landmark in the breast lesion diagnosis. Although there are advanced computer-aided detection (CADe) systems for nipple detection in breast mediolateral oblique (MLO) views of mammogram images, few academic works address the coronal views of breast ultrasound (BUS) images. This paper addresses a novel CADe system to locate the Nipple Shadow Area (NSA) in ultrasound images. Here the Hu Moments and Gray-level Co-occurrence Matrix (GLCM) were calculated through an iterative sliding window for the extraction of shape and texture features. These features are then concatenated and fed into an Artificial Neural Network (ANN) to obtain probable NSA’s. Later, contour features, such as shape complexity through fractal dimension, edge distance from the periphery and contour area, were computed and passed into a Support Vector Machine (SVM) to identify the accurate NSA in each case. The coronal plane BUS dataset is built upon our own, which consists of 64 images from 13 patients. The test results show that the proposed CADe system achieves 91.99% accuracy, 97.55% specificity, 82.46% sensitivity and 88% F-score on our dataset.

scholarly journals ANN and SVM to recognize Texture features for spontaneous Detection and Rating of Diabetic Retinopathy

2019 ◽  
Vol 9 (1) ◽  
pp. 5590-5595
Keyword(s):  
Diabetic Retinopathy ◽  
Research Work ◽  
Texture Features ◽  
Support Vector ◽  
Fundus Images ◽  
Small Vessels ◽  
The Neural Network ◽  
Major Loss ◽  
Occurrence Matrix ◽  
Fluid Leak

The higher levels of blood glucose most often causes a metabolic disorder commonly called as Diabetes, scientifically as Diabetes Mellitus. A consequence of this is a major loss of vision and in long terms may eventually cause complete blindness. It initiates with swelling on blood vessels, formation of microaneurysms at the end of narrow capillaries. Haemorrhages due to rupture of small vessels and fluid leak causes exudates. The specialist examines it to diagnose and gives proper treatment. Fundus images are the fundamental tool for proper diagnosis of patients by medical experts. In this research work the fundus images are taken for processing, the neural network and support vector machine are trained for the proposed model. The features are extracted from the diabetic retinopathy image by using texture based algorithms such as Gabor, Local binary pattern and Gray level co-occurrence matrix for rating the level of diabetic retinopathy. The performance of all methods is calculated based on accuracy, precision, Recall and f-measure.

scholarly journals FORMING THE STACK OF TEXTURE FEATURES FOR LIVER ULTRASOUND IMAGES CLASSIFICATION

2020 ◽  
Vol 3 (4) ◽  
pp. 240-251
Author(s):  
Dmitro Yuriiovych Hrishko ◽  
Ievgen Arnoldovich Nastenko ◽  
Maksym Oleksandrovych Honcharuk ◽  
Volodymyr Anatoliyovich Pavlov
Keyword(s):  
Random Forest ◽  
Texture Analysis ◽  
Binary Classification ◽  
Texture Features ◽  
Normal Liver ◽  
Group Method ◽  
Ultrasound Images ◽  
Liver Ultrasound ◽  
Random Forest Models ◽  
Occurrence Matrix

This article discusses the use of texture analysis methods to obtain informative features that describe the texture of liver ultrasound images. In total, 317 liver ultrasound images were analyzed, which were provided by the Institute of Nuclear Medicine and Radiation Diagnostics of NAMS of Ukraine. The images were taken by three different sensors (convex, linear, and linear sensor in increased signal level mode). Both images of patients with a normal liver condition and patients with specific liver disease (there were diseases such as: autoimmune hepatitis, Wilson's disease, hepatitis B and C, steatosis, and cirrhosis) were present in the database. Texture analysis was used for “Feature Construction”, which resulted in more than a hundred different informative features that made up a common stack. Among them, there are such features as: three authors’ patented features derived from the grey level co-occurrence matrix; features, obtained with the help of spatial sweep method (working by the principle of group method of data handling), which was applied to ultrasound images; statistical features, calculated on the images, brought to one scale with the help of differential horizontal and vertical matrices, which are proposed by the authors; greyscale pairs ensembles (found using the genetic algorithm), which identify liver pathology on images, transformed with the help of horizontal and vertical differentiations, in the best possible way. The resulting trait stack was used to solve the problem of binary classification (“norma-pathology”) of ultrasound liver images. A Machine Learning method, namely “Random Forest”, was used for this purpose. Before the classification, in order to obtain objective results, the total samples were divided into training (70 %), testing (20 %), and examining (10 %). The result was the best three Random Forest models separately for each sensor, which gave the following recognition rates: 93.4 % for the convex sensor, 92.9 % for the linear sensor, and 92 % for the reinforced linear sensor

scholarly journals Copy Move Forgery Detection Through Differential Excitation Component-Based Texture Features

2020 ◽  
Vol 12 (3) ◽  
pp. 27-44
Author(s):  
Gulivindala Suresh ◽  
Chanamallu Srinivasa Rao
Keyword(s):  
Feature Vector ◽  
Texture Feature ◽  
Texture Features ◽  
Support Vector ◽  
Discrete Wavelet ◽  
Detection Accuracy ◽  
Detection Techniques ◽  
Copy Move Forgery Detection ◽  
Occurrence Matrix ◽  
Differential Excitation

Copy-move forgery (CMF) is an established process to copy an image segment and pastes it within the same image to hide or duplicate a portion of the image. Several CMF detection techniques are available; however, better detection accuracy with low feature vector is always substantial. For this, differential excitation component (DEC) of Weber Law descriptor in combination with the gray level co-occurrence matrix (GLCM) approach of texture feature extraction for CMFD is proposed. GLCM Texture features are computed in four directions on DEC and this acts as a feature vector for support vector machine classifier. These texture features are more distinguishable and it is validated through other two proposed methods based on discrete wavelet transform-GLCM (DWT-GLCM) and GLCM. Experimentation is carried out on CoMoFoD and CASIA databases to validate the efficacy of proposed methods. Proposed methods exhibit resilience against many post-processing attacks. Comparative analysis with existing methods shows the superiority of the proposed method (DEC-GLCM) with regard to detection accuracy.

Effect of GLCM Texture Features on the Medio-Lateral Oblique (MLO) View of Digital Mammograms for Breast Cancer Detection

2020 ◽  
Vol 9 (2) ◽  
pp. 25-44
Author(s):  
Usha N. ◽  
Sriraam N. ◽  
Kavya N. ◽  
Bharathi Hiremath ◽  
Anupama K Pujar ◽  
...  
Keyword(s):  
Breast Cancer ◽  
Classification Accuracy ◽  
Breast Imaging ◽  
Texture Features ◽  
Support Vector ◽  
Risk Of Death ◽  
Automated Method ◽  
Occurrence Matrix ◽  
Aided Diagnosis ◽  
Mammogram Images

Breast cancer is one among the most common cancers in women. The early detection of breast cancer reduces the risk of death. Mammograms are an efficient breast imaging technique for breast cancer screening. Computer aided diagnosis (CAD) systems reduce manual errors and helps radiologists to analyze the mammogram images. The mammogram images are typically in two views, cranial-caudal (CC) and medio lateral oblique (MLO) views. MLO contains pectoral muscles (chest muscles) at the upper right or left corner of the image. In this study, it was removed by using a semi-automated method. All the normal and abnormal images were filtered and enhanced to improve the quality. GLCM (Gray Level Co-occurrence Matrix) texture features were extracted and analyzed by changing the number of features in a feature set. Linear Support Vector Machine (LSVM) was used as classifier. The classification accuracy was improved as the number of features in GLCM feature set increases. Simulation results show an overall classification accuracy of 96.7% with 19 GLCM features using SVM classifiers.

scholarly journals Skin Disease Recognition Method Based on Image Color and Texture Features

2018 ◽  
Vol 2018 ◽  
pp. 1-10 ◽  
Author(s):  
Li-sheng Wei ◽  
Quan Gan ◽  
Tao Ji
Keyword(s):  
Skin Disease ◽  
Skin Diseases ◽  
Texture Features ◽  
Support Vector ◽  
Grey Level ◽  
Recognition Method ◽  
Svm Classification ◽  
Color Features ◽  
Automatic Methods ◽  
Occurrence Matrix

Skin diseases have a serious impact on people’s life and health. Current research proposes an efficient approach to identify singular type of skin diseases. It is necessary to develop automatic methods in order to increase the accuracy of diagnosis for multitype skin diseases. In this paper, three type skin diseases such as herpes, dermatitis, and psoriasis skin disease could be identified by a new recognition method. Initially, skin images were preprocessed to remove noise and irrelevant background by filtering and transformation. Then the method of grey-level co-occurrence matrix (GLCM) was introduced to segment images of skin disease. The texture and color features of different skin disease images could be obtained accurately. Finally, by using the support vector machine (SVM) classification method, three types of skin diseases were identified. The experimental results demonstrate the effectiveness and feasibility of the proposed method.

scholarly journals Automatic Classification for Fruits’ Types and Identification of Rotten Ones Using k-NN and SVM

2019 ◽  
Vol 15 (03) ◽  
pp. 47 ◽  
Author(s):  
Ann Nosseir ◽  
Seif Eldin A. Ahmed
Keyword(s):  
Texture Feature ◽  
Texture Features ◽  
Nearest Neighbors ◽  
Support Vector ◽  
K Nearest Neighbors ◽  
A Value ◽  
Different Types ◽  
Linear Svm ◽  
Occurrence Matrix

Having a system that classifies different types of fruits and identifies the quality of fruits will be of a value in various areas especially in an area of mass production of fruits’ products. This paper presents a novel system that differentiates between four fruits types and identifies the decayed ones from the fresh. The algorithms used are based on the colour and the texture features of the fruits’ images. The algorithms extract the RGB values and the first statistical order and second statistical of the Gray Level Co-occurrence Matrix (GLCM) values. To segregate between the fruits’ types, Fine, Medium, Coarse, Cosine, Cubic, and Weighted K-Nearest Neighbors algorithms are applied. The accuracy percentages of each are 96.3%, 93.8%, 25%, 83.8%, 90%, and 95% respectively.  These steps are tested with 46 pictures taken from a mobile phone of seasonal fruits at the time i.e., banana, apple, and strawberry. All types were accurately identifying.  To tell apart the decayed fruits from the fresh, the linear and quadratic Support Vector Machine (SVM) algorithms differentiated between them based on the colour segmentation and the texture feature algorithms values of each fruit image. The accuracy of the linear SVM is 96% and quadratic SVM 98%.

scholarly journals A Novel Computer-Aided-Diagnosis System for Breast Ultrasound Images Based on BI-RADS Categories

2020 ◽  
Vol 10 (5) ◽  
pp. 1830
Author(s):  
Yi-Wei Chang ◽  
Yun-Ru Chen ◽  
Chien-Chuan Ko ◽  
Wei-Yang Lin ◽  
Keng-Pei Lin
Keyword(s):  
Breast Tumor ◽  
Breast Imaging ◽  
Breast Lesion ◽  
Low Cost ◽  
Breast Ultrasound ◽  
Tissue Imaging ◽  
Support Vector ◽  
Ultrasound Images ◽  
Traditional Assessment ◽  
Cad System

The breast ultrasound is not only one of major devices for breast tissue imaging, but also one of important methods in breast tumor screening. It is non-radiative, non-invasive, harmless, simple, and low cost screening. The American College of Radiology (ACR) proposed the Breast Imaging Reporting and Data System (BI-RADS) to evaluate far more breast lesion severities compared to traditional diagnoses according to five-criterion categories of masses composition described as follows: shape, orientation, margin, echo pattern, and posterior features. However, there exist some problems, such as intensity differences and different resolutions in image acquisition among different types of ultrasound imaging modalities so that clinicians cannot always identify accurately the BI-RADS categories or disease severities. To this end, this article adopted three different brands of ultrasound scanners to fetch breast images for our experimental samples. The breast lesion was detected on the original image using preprocessing, image segmentation, etc. The breast tumor’s severity was evaluated on the features of the breast lesion via our proposed classifiers according to the BI-RADS standard rather than traditional assessment on the severity; i.e., merely using benign or malignant. In this work, we mainly focused on the BI-RADS categories 2–5 after the stage of segmentation as a result of the clinical practice. Moreover, several features related to lesion severities based on the selected BI-RADS categories were introduced into three machine learning classifiers, including a Support Vector Machine (SVM), Random Forest (RF), and Convolution Neural Network (CNN) combined with feature selection to develop a multi-class assessment of breast tumor severity based on BI-RADS. Experimental results show that the proposed CAD system based on BI-RADS can obtain the identification accuracies with SVM, RF, and CNN reaching 80.00%, 77.78%, and 85.42%, respectively. We also validated the performance and adaptability of the classification using different ultrasound scanners. Results also indicate that the evaluations of F-score based on CNN can obtain measures higher than 75% (i.e., prominent adaptability) when samples were tested on various BI-RADS categories.

scholarly journals Diagnostic performance of machine learning applied to texture analysis-derived features for breast lesion characterisation at automated breast ultrasound: a pilot study

2019 ◽  
Vol 3 (1) ◽  
Author(s):  
Magda Marcon ◽  
Alexander Ciritsis ◽  
Cristina Rossi ◽  
Anton S. Becker ◽  
Nicole Berger ◽  
...  
Keyword(s):  
Machine Learning ◽  
Pilot Study ◽  
Texture Analysis ◽  
Area Under The Curve ◽  
Texture Features ◽  
Breast Ultrasound ◽  
Support Vector ◽  
Maximum Area ◽  
Svm Algorithm ◽  
Automated Breast Ultrasound

Abstract Background Our aims were to determine if features derived from texture analysis (TA) can distinguish normal, benign, and malignant tissue on automated breast ultrasound (ABUS); to evaluate whether machine learning (ML) applied to TA can categorise ABUS findings; and to compare ML to the analysis of single texture features for lesion classification. Methods This ethically approved retrospective pilot study included 54 women with benign (n = 38) and malignant (n = 32) solid breast lesions who underwent ABUS. After manual region of interest placement along the lesions’ margin as well as the surrounding fat and glandular breast tissue, 47 texture features (TFs) were calculated for each category. Statistical analysis (ANOVA) and a support vector machine (SVM) algorithm were applied to the texture feature to evaluate the accuracy in distinguishing (i) lesions versus normal tissue and (ii) benign versus malignant lesions. Results Skewness and kurtosis were the only TF significantly different among all the four categories (p < 0.000001). In subsets (i) and (ii), a maximum area under the curve of 0.86 (95% confidence interval [CI] 0.82–0.88) for energy and 0.86 (95% CI 0.82–0.89) for entropy were obtained. Using the SVM algorithm, a maximum area under the curve of 0.98 for both subsets was obtained with a maximum accuracy of 94.4% in subset (i) and 90.7% in subset (ii). Conclusions TA in combination with ML might represent a useful diagnostic tool in the evaluation of breast imaging findings in ABUS. Applying ML techniques to TFs might be superior compared to the analysis of single TF.

Computer Aided Interpretation of Fibrous Texture in Hepatic Magnetic Resonance Images

2013 ◽  
Vol 647 ◽  
pp. 325-330 ◽  
Author(s):  
Yu Fan Zeng ◽  
Xue Jun Zhang ◽  
Wen Yan ◽  
Li Ling Long ◽  
Yu Kun Huang ◽  
...  
Keyword(s):  
Magnetic Resonance ◽  
Hepatic Fibrosis ◽  
Region Of Interest ◽  
Texture Features ◽  
Magnetic Resonance Images ◽  
Optimal Number ◽  
Support Vector ◽  
Mr Images ◽  
Accuracy Rate ◽  
Occurrence Matrix

The fibrous texture in liver is one of important signs for interpreting the chronic liver diseases in radiologists’ routines. In order to investigate the usefulness of various texture features calculated by computer algorithm on hepatic magnetic resonance (MR) images, 15 texture features were calculated from the gray level co-occurrence matrix (GLCM) within a region of interest (ROI) which was selected from the MR images with 6 stages of hepatic fibrosis. By different combination of 15 features as input vectors, the classifier had different performance in staging the hepatic fibrosis. Each combination of texture features was tested by Support Vector Machine (SVM) with leave one case out method. 173 patients’ MR images including 6 stages of hepatic fibrosis were scanned within recent two years. The result showed that optimal number of features was confirmed from 3 to 7 by investigating the classified accuracy rate between each stage/group. It is evident that angular second moment, entropy, sum average and sum entropy played the most significant role in classification.

scholarly journals Classification for Liver Diseases Based on Ultrasound Image Texture Features

2018 ◽  
Author(s):  
Sendren Sheng-Dong Xu ◽  
Chien-Tien Su ◽  
Chun-Chao Chang ◽  
Pham Quoc Phu
Keyword(s):  
Liver Abscess ◽  
Liver Diseases ◽  
Ultrasound Image ◽  
Texture Features ◽  
Image Texture ◽  
Support Vector ◽  
Svm Classifier ◽  
Ultrasound Images ◽  
Gray Level ◽  
Forward Selection

This paper discusses the computer-aided (CAD) classification between Hepatocellular Carcinoma (HCC), i.e., the most common type of liver cancer, and Liver Abscess, based on ultrasound image texture features and Support Vector Machine (SVM) classifier. Among 79 cases of liver diseases, with 44 cases of HCC and 35 cases of liver abscess, this research extracts 96 features of Gray-Level Co-occurrence Matrix (GLCM) and Gray-Level Run-Length Matrix (GLRLM) from the region of interests (ROIs) in ultrasound images. Three feature selection models, i) Sequential Forward Selection, ii) Sequential Backward Selection, and iii) F-score, are adopted to determine the identification of these liver diseases. Finally, the developed system can classify HCC and liver abscess by SVM with the accuracy of 88.875%. The proposed methods can provide diagnostic assistance while distinguishing two kinds of liver diseases by using a CAD system.

Sign in / Sign up

Export Citation Format

Share Document