Modeling Car Drivers’ On-Street Parking Decisions using the Integrated Hierarchical Information Integration Approach

2018 ◽  
Vol 2672 (49) ◽  
pp. 23-33 ◽  
Author(s):  
Annum Khaliq ◽  
Peter van der Waerden ◽  
Davy Janssens
Keyword(s):  
Information Integration ◽  
Urban Areas ◽  
Multinomial Logit Model ◽  
Walking Distance ◽  
Large Set ◽  
Multi Agent Systems ◽  
Street Segment ◽  
The Road ◽  
A Minor ◽  
Hierarchical Information Integration

Rising issues in urbanization and transportation urge municipalities to optimize the use of on-street parking spaces in order to meet local needs and complement the role of available off-street parking. In this paper car drivers’ parking decisions have been investigated using a stated choice experiment, based on the method of integrated hierarchical information integration. According to this approach, a large set of parking related attributes and attribute levels are grouped into two higher order decision constructs, which are presented as hypothetical street segments. The respondents were asked if they would park their car in the street segment with the listed attributes. The collected data is used to estimate the parameters of a standard multinomial logit model. This study differs from previous studies as a large range of attributes is examined, including the parking situation and the road conditions in a street segment along with some features of off-street parking facilities present in the vicinity of the street segment. The results indicate that the contextual variables such as ‘walking distance to destination’ and ‘parking cost’ are key attributes that car drivers consider while making on-street parking decisions, while street-level attributes such as ‘occupancy,’‘security,’ and ‘surrounding activities’ seem to have only a minor impact. The study concludes with an outlook of how these insights into car drivers’ parking choice process can be used by local authorities to reduce cruising in urban areas. Moreover, these findings can be integrated in multi-agent systems to investigate car drivers’ movements in urban areas.

scholarly journals Car Drivers’ Willingness to Pay for Design Related Attributes of Parking Garages: Hierarchical Information Integration Approach

2019 ◽  
Vol 2673 (12) ◽  
pp. 485-493
Author(s):  
Peter van der Waerden ◽  
Soufyan Agarad
Keyword(s):  
Willingness To Pay ◽  
Information Integration ◽  
Choice Experiment ◽  
Multinomial Logit Model ◽  
Walking Distance ◽  
Online Questionnaire ◽  
Final Destination ◽  
Parking Garages ◽  
Choice Tasks ◽  
Hierarchical Information Integration

This paper focuses on car drivers’ willingness to pay for design related attributes of parking garages. Car drivers’ willingness is retrieved from a stated choice experiment including three basic attributes (capacity of parking, parking tariff, and walking distance between parking and final destination) and 25 design related attributes. The design related attributes are included in the choice experiment following the principles of Hierarchical Information Integration that grouped the 25 attributes into five constructs: attributes related to the parking area, pedestrian environment, accessibility, service, and safety. Per construct, respondents were invited to choose two times between two parking facilities. The experiment was included in an online questionnaire that was completed by 315 respondents who evaluated in total 3,150 choice tasks. The respondents’ choices are evaluated using a standard multinomial logit model. The results show that the following design related attributes significantly contribute to the total utility of parking garages: the width of parking spaces, the width of road lanes, the type of pedestrians’ routes, the width of staircases, the types of elevator points, the presence of parking guidance systems, the available payment options, the presence of toilets, the level of lighting, the presence of ramps, and the level of cleanliness and maintenance. The respondents are willing to pay most for the available payment options (range €2.91) and the level of cleanliness and maintenance (range €2.69).

CREATING WALKING LED TRANSIT STATIONS FOR WOMEN IN MALAYSIA

2020 ◽  
Vol 7 (1) ◽  
pp. 99
Author(s):  
Yong Adilah Shamsul Harumain ◽  
Nur Farhana Azmi ◽  
Suhaini Yusoff
Keyword(s):  
Quality Of Life ◽  
Developing Countries ◽  
Public Transportation ◽  
Carbon Emission ◽  
The Other ◽  
Walking Distance ◽  
The Road ◽  
On The Road ◽  
Female User

Transit stations are generally well known as nodes of spaces where percentage of people walking are relatively high. The issue is do more planning is actually given to create walkability. Creating walking led transit stations involves planning of walking distance, providing facilities like pathways, toilets, seating and lighting. On the other hand, creating walking led transit station for women uncover a new epitome. Walking becomes one of the most important forms of mobility for women in developing countries nowadays. Encouraging women to use public transportation is not just about another effort to promote the use of public transportation but also another great endeavour to reduce numbers of traffic on the road. This also means, creating an effort to control accidents rate, reducing carbon emission, improving health and eventually, developing the quality of life. Hence, in this paper, we sought first to find out the factors that motivate women to walk at transit stations in Malaysia. A questionnaire survey with 562 female user of Light Railway Transit (LRT) was conducted at LRT stations along Kelana Jaya Line. Both built and non-built environment characteristics, particularly distance, safety and facilities were found as factors that are consistently associated with women walkability. With these findings, the paper highlights the criteria  which are needed to create and make betterment of transit stations not just for women but also for walkability in general.

Safety at Curves and Road Geometry Standards in Some European Countries

1996 ◽  
Vol 1523 (1) ◽  
pp. 99-106 ◽  
Author(s):  
Thierry Brenac
Keyword(s):  
Urban Areas ◽  
National Standards ◽  
European Countries ◽  
Design Standards ◽  
The Road ◽  
Horizontal Curves ◽  
Road Design ◽  
Road Geometry ◽  
Design Speed ◽  
Curve Geometry

This paper deals with safety at horizontal curves on two-lane roads outside urban areas and the way the road design standards of different European countries account for this safety aspect. After a review of some research results, the main aspects of curve geometry and the curve's place in the horizontal alignment are analyzed. The main conclusions are that the traditional design speed approach is insufficient and that formal complementary rules in road design standards, especially to improve compatibility between successive elements of the alignment, must be introduced. If such complementary rules already exist in some national standards, they are neither frequent nor homogeneous throughout the different countries, and it seems that they are not based on sufficiently developed knowledge.

scholarly journals RCVC: RSU-Aided Cluster-Based Vehicular Clouds Architecture for Urban Areas

Electronics ◽  
2021 ◽  
Vol 10 (2) ◽  
pp. 193
Author(s):  
Mohamed Ben bezziane ◽  
Ahmed Korichi ◽  
Chaker Abdelaziz Kerrache ◽  
Mohamed el Amine Fekair
Keyword(s):  
Urban Areas ◽  
High Speed ◽  
Service Discovery ◽  
Cluster Head ◽  
Experimental Comparison ◽  
The Road ◽  
Road Side Unit ◽  
End To End Delay ◽  
End To End ◽  
On The Road

As a promising topic of research, Vehicular Cloud (VC) incorporates cloud computing and ad-hoc vehicular network (VANET). In VC, supplier vehicles provide their services to consumer vehicles in real-time. These services have a significant impact on the applications of internet access, storage and data. Due to the high-speed mobility of vehicles, users in consumer vehicles need a mechanism to discover services in their vicinity. Besides this, quality of service varies from one supplier vehicle to another; thus, consumer vehicles attempt to pick out the most appropriate services. In this paper, we propose a novel protocol named RSU-aided Cluster-based Vehicular Clouds protocol (RCVC), which constructs the VC using the Road Side Unit (RSU) directory and Cluster Head (CH) directory to make the resources of supplier vehicles more visible. While clusters of vehicles that move on the same road form a mobile cloud, the remaining vehicles form a different cloud on the road side unit. Furthermore, the consumption operation is achieved via the service selection method, which is managed by the CHs and RSUs based on a mathematical model to select the best services. Simulation results prove the effectiveness of our protocol in terms of service discovery and end-to-end delay, where we achieved service discovery and end-to-end delay of 3 × 10−3 s and 13 × 10−2 s, respectively. Moreover, we carried out an experimental comparison, revealing that the proposed method outperformed several states of the art protocols.

FPGA and ASIC implementation of the algorithm for traffic monitoring in urban areas

2011 ◽  
Vol 59 (2) ◽  
pp. 137-140 ◽  
Author(s):  
S. Szczepański ◽  
M. Wöjcikowski ◽  
B. Pankiewicz ◽  
M. KŁosowski ◽  
R. Żaglewski
Keyword(s):  
Urban Areas ◽  
Traffic Monitoring ◽  
Detection Algorithm ◽  
Frame Rate ◽  
Integrated Sensor ◽  
The Road ◽  
Moving Vehicles ◽  
Direction Of Movement ◽  
Account Due ◽  
Selection Of

FPGA and ASIC implementation of the algorithm for traffic monitoring in urban areas This paper describes the idea and the implementation of the image detection algorithm, that can be used in integrated sensor networks for environment and traffic monitoring in urban areas. The algorithm is dedicated to the extraction of moving vehicles from real-time camera images for the evaluation of traffic parameters, such as the number of vehicles, their direction of movement and their approximate speed. The authors, apart from the careful selection of particular steps of the algorithm towards hardware implementation, also proposed novel improvements, resulting in increasing the robustness and the efficiency. A single, stationary, monochrome camera is used, simple shadow and highlight elimination is performed. The occlusions are not taken into account, due to placing the camera at a location high above the road. The algorithm is designed and implemented in pipelined hardware, therefore high frame-rate efficiency has been achieved. The algorithm has been implemented and tested in FPGA and ASIC.

Psychiatric illness, medication and driving: an audit of documentation

2015 ◽  
Vol 33 (3) ◽  
pp. 171-174 ◽  
Author(s):  
A. Gallagher ◽  
S. Shah ◽  
W. Abassi ◽  
E. Walsh
Keyword(s):  
Road Safety ◽  
Psychiatric Patients ◽  
Fitness To Drive ◽  
Team Members ◽  
The Road ◽  
Significant Difference ◽  
New Guidelines ◽  
A Minor ◽  
Inpatient Psychiatric Unit ◽  
Minor Improvement

ObjectivesGuidelines on advising patients on fitness to drive have been published recently by the Road Safety Authority in collaboration with the Royal College of Physicians of Ireland. The aim of this audit is to assess if the new guidelines are being adhered to.MethodExamination of the documentation and adherence to the guidelines in the inpatient psychiatric unit, Mayo General Hospital.ResultsOf the 100 patients included in audit cycle one, none had any specific documentation about driving. One patient was admitted with alcohol misuse and was driving. On re-auditing, following presentation at academic meeting and education of team members on the guidelines, there was a minor improvement of 7%.ConclusionThere was no significant difference in documentation on re-audit. However, an increase of 7% is nonetheless encouraging. Information concerning driving should be a standard part of advice given to all psychiatric patients.

scholarly journals The road beyond licensing: the impact of a driver licensing support program on employment outcomes for Aboriginal and Torres Strait Islander Australians

2021 ◽  
Vol 21 (1) ◽  
Author(s):  
Bobby Porykali ◽  
Patricia Cullen ◽  
Kate Hunter ◽  
Kris Rogers ◽  
Melissa Kang ◽  
...  
Keyword(s):  
Urban Areas ◽  
Torres Strait Islander ◽  
Geographical Area ◽  
Employment Outcomes ◽  
Support Program ◽  
The Road ◽  
Regional Area ◽  
Torres Strait ◽  
The Impact ◽  
Driver Licensing

Abstract Background With increasingly tough graduated driver licensing laws in all Australian States and Territories, driver licensing support programs are recognised as being important to support Aboriginal and Torres Strait Islander peoples to obtain a driver licence. Such programs appear to improve licensing attainment rates, but few studies have examined the broader impact that these programs can have. This research aims to 1) examine the impact of a New South Wales (NSW) based driver licensing support program (Driving Change) on client employment outcomes; 2) assess the influence of geographical area of program delivery on driver licence attainment. Methods Driving Change was delivered from February 2013 to August 2016 in 4 urban and 7 regional Aboriginal communities of NSW. Clients were followed-up at 6 months or more following contact with the program as part of routine program operations. Descriptive statistics and regression models were used to analyse data. Results From 933 clients contacted 254 agreed to provide feedback, a response rate of 27%. Those that responded were mostly female (57%), aged 24 years and under (72%), unemployed (85%) with secondary education or less (71%) and from a regional area (74%). Adjusted logistic regression indicated that clients who achieved an independent licence were more likely (OR: 2.5, 95% CI: 1.22–5.24, p = 0.011) of reporting a new job or change in job than those who did not attain a licence. Clients from regional areas were more likely (OR: 1.72, 95% CI: 1.27–2.33, p < 0.001) to gain an independent licence than those from urban areas. There was no difference in employment outcomes (OR: 1.2, 95% CI: 0.53–2.52, p = 0.719) for clients from urban compared to regional areas. Conclusion The Driving Change program appears to be effective in improving employment outcomes for those who gained a licence. Clients from regional areas were more likely to gain a licence compared to those in urban settings, and were predominantly young and unemployed, often a hard to reach cohort. Future licensing programs being delivered in regional areas need integrated pathways into employment opportunities to provide holistic services that address the social and economic challenges faced by Aboriginal and Torres Strait Islander Australians.

scholarly journals Happiness in Romanian cities on the road from post-communism transition to EU accession

REGION ◽  
2016 ◽  
Vol 3 (2) ◽  
pp. 1 ◽  
Author(s):  
Camilla Lenzi ◽  
Giovanni Perucca
Keyword(s):  
Economic Growth ◽  
Life Satisfaction ◽  
Rural Communities ◽  
Urban Areas ◽  
Eu Accession ◽  
The Road ◽  
On The Road ◽  
Post Communism ◽  
The One ◽  
Economic Growth Rates

<p>The literature on life satisfaction in transition countries, and in particular on Romania, demonstrated that life satisfaction significantly differs across rural communities and cities of different size. The question addressed in this paper is whether these imbalances are stable over time or, instead, they become manifest in the presence of strong divergences in the economic growth rates of different kinds of communities. Results point out that in the period of sharp economic growth led by large urban areas, as the one experienced by Romania on the road to EU accession, rural/urban disparities in life satisfaction widened, favoring cities of intermediate size.</p>

scholarly journals Optimization of Evacuation and Walking-Home Routes from Osaka City After a Nankai Megathrust Earthquake Using Road Network Big Data

2021 ◽  
pp. 369-389
Author(s):  
Atsushi Takizawa ◽  
Yutaka Kawagishi
Keyword(s):  
Big Data ◽  
Public Transportation ◽  
Urban Areas ◽  
Road Network ◽  
Large Earthquake ◽  
The Road ◽  
Return Home ◽  
Flooded Area ◽  
Network Big Data ◽  
Surrounding Areas

AbstractWhen a disaster such as a large earthquake occurs, the resulting breakdown in public transportation leaves urban areas with many people who are struggling to return home. With people from various surrounding areas gathered in the city, unusually heavy congestion may occur on the roads when the commuters start to return home all at once on foot. In this chapter, it is assumed that a large earthquake caused by the Nankai Trough occurs at 2 p.m. on a weekday in Osaka City, where there are many commuters. We then assume a scenario in which evacuation from a resulting tsunami is carried out in the flooded area and people return home on foot in the other areas. At this time, evacuation and returning-home routes with the shortest possible travel times are obtained by solving the evacuation planning problem. However, the road network big data for Osaka City make such optimization difficult. Therefore, we propose methods for simplifying the large network while keeping those properties necessary for solving the optimization problem and then recovering the network. The obtained routes are then verified by large-scale pedestrian simulation, and the effect of the optimization is verified.

scholarly journals Bicycling crashes on streetcar (tram) or train tracks: mixed methods to identify prevention measures

2021 ◽  
Author(s):  
Kay Teschke ◽  
Jessica Dennis ◽  
Conor C. O. Reynolds ◽  
Meghan Winters ◽  
M. Anne Harris
Keyword(s):  
Mixed Methods ◽  
Urban Areas ◽  
Prevention Measures ◽  
The Road ◽  
Rail Systems ◽  
Route Design ◽  
Individual Knowledge ◽  
Engineering Information ◽  
Train Tracks ◽  
Width Measurements

Background Streetcar or train tracks in urban areas are difficult for bicyclists to negotiate and are a cause of crashes and injuries. This study used mixed methods to identify measures to prevent such crashes, by examining track-related crashes that resulted in injuries to cyclists, and obtaining information from the local transit agency and bike shops. Methods We compared personal, trip, and route infrastructure characteristics of 87 crashes directly involving streetcar or train tracks to 189 crashes in other circumstances in Toronto, Canada. We complemented this with engineering information about the rail systems, interviews of personnel at seven bike shops about advice they provide to customers, and width measurements of tires on commonly sold bikes. Results In our study, 32 % of injured cyclists had crashes that directly involved tracks. The vast majority resulted from the bike tire being caught in the rail flangeway (gap in the road surface alongside rails), often when cyclists made unplanned maneuvers to avoid a collision. Track crashes were more common on major city streets with parked cars and no bike infrastructure, with left turns at intersections, with hybrid, racing and city bikes, among less experienced and less frequent bicyclists, and among women. Commonly sold bikes typically had tire widths narrower than the smallest track flangeways. There were no track crashes in route sections where streetcars and trains had dedicated rights of way. Conclusions Given our results, prevention efforts might be directed at individual knowledge, bicycle tires, or route design, but their potential for success is likely to differ. Although it may be possible to reach a broader audience with continued advice about how to avoid track crashes, the persistence and frequency of these crashes and their unpredictable circumstances indicates that other solutions are needed. Using tires wider than streetcar or train flangeways could prevent some crashes, though there are other considerations that lead many cyclists to have narrower tires. To prevent the majority of track-involved injuries, route design measures including dedicated rail rights of way, cycle tracks (physically separated bike lanes), and protected intersections would be the best strategy.

Sign in / Sign up

Export Citation Format

Share Document