scholarly journals RCVC: RSU-Aided Cluster-Based Vehicular Clouds Architecture for Urban Areas

Electronics ◽  
2021 ◽  
Vol 10 (2) ◽  
pp. 193
Author(s):  
Mohamed Ben bezziane ◽  
Ahmed Korichi ◽  
Chaker Abdelaziz Kerrache ◽  
Mohamed el Amine Fekair
Keyword(s):  
Urban Areas ◽  
High Speed ◽  
Service Discovery ◽  
Cluster Head ◽  
Experimental Comparison ◽  
The Road ◽  
Road Side Unit ◽  
End To End Delay ◽  
End To End ◽  
On The Road

As a promising topic of research, Vehicular Cloud (VC) incorporates cloud computing and ad-hoc vehicular network (VANET). In VC, supplier vehicles provide their services to consumer vehicles in real-time. These services have a significant impact on the applications of internet access, storage and data. Due to the high-speed mobility of vehicles, users in consumer vehicles need a mechanism to discover services in their vicinity. Besides this, quality of service varies from one supplier vehicle to another; thus, consumer vehicles attempt to pick out the most appropriate services. In this paper, we propose a novel protocol named RSU-aided Cluster-based Vehicular Clouds protocol (RCVC), which constructs the VC using the Road Side Unit (RSU) directory and Cluster Head (CH) directory to make the resources of supplier vehicles more visible. While clusters of vehicles that move on the same road form a mobile cloud, the remaining vehicles form a different cloud on the road side unit. Furthermore, the consumption operation is achieved via the service selection method, which is managed by the CHs and RSUs based on a mathematical model to select the best services. Simulation results prove the effectiveness of our protocol in terms of service discovery and end-to-end delay, where we achieved service discovery and end-to-end delay of 3 × 10−3 s and 13 × 10−2 s, respectively. Moreover, we carried out an experimental comparison, revealing that the proposed method outperformed several states of the art protocols.

scholarly journals Happiness in Romanian cities on the road from post-communism transition to EU accession

REGION ◽  
2016 ◽  
Vol 3 (2) ◽  
pp. 1 ◽  
Author(s):  
Camilla Lenzi ◽  
Giovanni Perucca
Keyword(s):  
Economic Growth ◽  
Life Satisfaction ◽  
Rural Communities ◽  
Urban Areas ◽  
Eu Accession ◽  
The Road ◽  
On The Road ◽  
Post Communism ◽  
The One ◽  
Economic Growth Rates

<p>The literature on life satisfaction in transition countries, and in particular on Romania, demonstrated that life satisfaction significantly differs across rural communities and cities of different size. The question addressed in this paper is whether these imbalances are stable over time or, instead, they become manifest in the presence of strong divergences in the economic growth rates of different kinds of communities. Results point out that in the period of sharp economic growth led by large urban areas, as the one experienced by Romania on the road to EU accession, rural/urban disparities in life satisfaction widened, favoring cities of intermediate size.</p>

Mobile Learning Technologies

2011 ◽  
pp. 146-152 ◽  
Author(s):  
Diane M. Gayeski
Keyword(s):  
Health Care Professionals ◽  
High Speed ◽  
Learning Technologies ◽  
Social Environments ◽  
The Road ◽  
Powerful Learning ◽  
Large Numbers ◽  
On The Road ◽  
And Performance ◽  
Internet Connections

While educational and corporate training environments have made large investments in getting wired to high-speed Internet connections, our work and social environments are rapidly becoming more mobile and flexible. The Internet and organizationally based intranets are powerful learning and performance tools, as long as users have a high-speed connection and up-to-date computing equipment. Online learning and information is not nearly as convenient or reliable when learners need to access sites from their homes, hotel rooms, client locations, or while on the road. In corporate settings, large numbers of critical employees such as factory engineers, health care professionals, builders, and maintenance workers often do not even have offices in which to use a computer.

Multicast Routing Protocols, Algorithms and its QOS Extensions

2005 ◽  
pp. 2036-2041
Author(s):  
D. Chakraborty ◽  
G. Chakraborty ◽  
N. Shiratori
Keyword(s):  
Data Storage ◽  
High Speed ◽  
Multicast Routing ◽  
Multicast Communication ◽  
Delay Jitter ◽  
End To End Delay ◽  
End To End ◽  
Storage Technologies ◽  
New Applications ◽  
Audio Video

The advancement in optical fiber and switching technologies has resulted in a new generation of high-speed networks that can achieve speeds of up to a few gigabits per second. Also, the progress in audio, video and data storage technologies has given rise to new distributed real-time applications. These applications may involve multimedia, which require low end-to-end delay. The applications’ requirements, such as the end-to-end delay, delay jitter, and loss rate, are expressed as QoS parameters, which must be guaranteed. In addition, many of these new applications involve multiple users, and hence the importance of multicast communication. Multimedia applications are becoming increasingly important, as networks are now capable of carrying continuous media traffic, such as voice and video, to the end user. When there is a lot of information to transmit to a subset of hosts, then multicast is the best possible way to facilitate it. This article addresses different multicast routing algorithms and protocols. We have also discussed about the QoS multicast routing and conclude this article with mobile multicasting.

scholarly journals New Operating Strategies for an On-the-Road Modular, Electric and Autonomous Vehicle Concept in Urban Transportation

2019 ◽  
Vol 10 (4) ◽  
pp. 91
Author(s):  
Christian Ulrich ◽  
Horst E. Friedrich ◽  
Jürgen Weimer ◽  
Stephan A. Schmid
Keyword(s):  
Business Model ◽  
Urban Areas ◽  
Business Models ◽  
Autonomous Vehicle ◽  
Vehicle Concept ◽  
Drive Unit ◽  
The Road ◽  
Business Model Canvas ◽  
Operating Strategies ◽  
On The Road

Today commercial transport in urban areas faces major challenges. These include making optimal use of limited space, avoiding empty trips, meeting driver shortages as well as reducing costs and emissions such as CO2, particulate matter and noise. The mutual acceleration and reinforcement of technological trends such as electrification, digitization and automation may enable new vehicle and mobility concepts that can meet these challenges. One possible vehicle concept is presented in this article. It is based on on-the-road modularization, i.e., a vehicle that can change different transport capsules during operation. The vehicle is divided into an electrically propelled autonomous drive unit and a transport unit. Standardized interfaces between these units enable the easy design of capsules for different uses, while the drive unit can be used universally. Business models and operating strategies that allow optimal use of this vehicle concept are discussed in depth in the article. First, the current situation is analyzed followed by a detailed description of an exemplary business model using a business model canvas. The operating strategies and logistics concepts are illustrated and compared with conventional concepts.

scholarly journals Practicalities and Driving Dynamics of a Real Driving Emissions (RDE) Euro 6 Regulation Homologation Test

Energies ◽  
2019 ◽  
Vol 12 (12) ◽  
pp. 2306 ◽  
Author(s):  
Timothy Bodisco ◽  
Ali Zare
Keyword(s):  
Air Pollution ◽  
Boundary Conditions ◽  
Urban Areas ◽  
Exhaust Emissions ◽  
Gold Coast ◽  
Passenger Cars ◽  
Certification Process ◽  
The Road ◽  
Emission Testing ◽  
On The Road

One of the most important sources of air pollution, especially in urban areas, is the exhaust emissions from passenger cars. New European emissions regulations, to minimize the gap between manufacturer-reported emissions and those emitted on the road, require new vehicles to undergo emission testing on public roads during the certification process. Outlined in the new regulation are specific boundary conditions to which the route on which the vehicle is driven must comply during a legal test. These boundary conditions, as they relate to the design and subsequent driving of a compliant route, are discussed in detail. The practicality of designing a compliant route is discussed in the context of developing a route on the Gold Coast in Queensland, Australia, in a prescriptive manner. The route itself was driven 5 times and the results compared against regulation boundary conditions.

scholarly journals Tyre Weights an Overlooked Diffuse Source of Lead and Antimony to Road Runoff

2020 ◽  
Vol 12 (17) ◽  
pp. 6790
Author(s):  
Matthew Taylor ◽  
Niklas Kruger
Keyword(s):  
Urban Areas ◽  
Motor Vehicle ◽  
Environmentally Benign ◽  
Motor Vehicles ◽  
Traffic Density ◽  
Road Runoff ◽  
Diffuse Source ◽  
The Road ◽  
Roadside Dust ◽  
On The Road

Lead (Pb) remains elevated in road runoff and roadside dust, which has been attributed to legacy lead in surface soils from leaded petrol. However, “lead” tyre weights, an alloy of 95% Pb and 5% Sb, may be a relatively unrecognised diffuse source of Pb and Sb as they are still used in many countries. An unknown number of these weights drop off tyre rims and deposit on the road where they are abraded and dispersed, potentially causing adverse environmental effects. The type, number and weight of tyre weights lost from motor vehicles were characterised for a range of roading infrastructures and motor vehicle intensities in a 38 month long study of a 6.9 km length of road in Hamilton City, New Zealand. Overall, 1070 tyre weights with a combined mass of 18.6 kg were collected. About 96.4% of the collected weights were made of “lead”, which is an alloy of 95% Pb and 5% Sb, indicating tyre weights can be a major source of Pb and Sb in urban areas. The tyre weight distribution on roads used in this study depended mainly on traffic density and the prevalence of “start stop” patterns in traffic flow influenced by roundabouts and intersections. “Lead” tyre weights should be phased out and replaced with environmentally benign materials.

Analysis of Dynamic Load Level of High-Speed Heavy Vehicle Imposed on Uneven Pavement

2011 ◽  
Vol 138-139 ◽  
pp. 146-152
Author(s):  
Guo He Guo ◽  
Yu Feng Bai ◽  
Tao Wang
Keyword(s):  
Dynamic Load ◽  
High Speed ◽  
Load Level ◽  
Heavy Vehicle ◽  
Vehicle Speed ◽  
Destructive Effect ◽  
The Road ◽  
Wide Range ◽  
On The Road ◽  
Factor Interaction

Based on the significant destructive effect of heavy vehicle on uneven roads, two simplified models of pavement unevenness and vehicle dynamic load were established in accordance with D'A lembert principle, and Matlab software was used to analyze the changing law of dynamic load under the conditions of different road unevenness, vehicle speed and load. The results show that vehicles running on uneven road may produce more cumulative damages than static load, and DLC (dynamic load coefficient) changes in wide range, maximum up to 2.0 or more; the effect of speed and load on dynamic load is complex, and due to multi-factor interaction, DLC doesn’t consistently increase or decrease with speed and load increasing. Although the dynamic load level caused by high-speed heavy vehicle is not necessarily too high, its impact on the road can not be ignored.

scholarly journals Incremental, Critical Plane Analysis of Standing Wave Development, Self-Heating, and Fatigue during Regulatory High-Speed Tire Testing Protocols

2020 ◽  
Author(s):  
William V. Mars ◽  
Govind Paudel ◽  
Jesse D. Suter ◽  
Christopher G. Robertson
Keyword(s):  
Steady State ◽  
High Speed ◽  
Structural Integrity ◽  
Loss Modulus ◽  
Standing Waves ◽  
Strength Properties ◽  
Critical Plane ◽  
The Road ◽  
Self Heating ◽  
On The Road

ABSTRACT Tire speed ratings derive from regulatory testing in which tire structural integrity is validated over a series of steps with successively increasing speed. For the FMVSS 139 high-speed standard, there are four half-hour duration speed steps at 80, 140, 150, and 160 kph. Speed ratings from Q through Y may be attained through the UN ECE R30 regulation high-speed testing. For either protocol, a tire must demonstrate the ability to operate without crack development at high speed for a specified period. After the test, “there shall be no evidence of tread, sidewall, ply, cord, inner liner, belt or bead separation, chunking, broken cords, cracking, or open splices.” A workflow for simulating regulatory high-speed durability performance has been developed based upon (1) recent improvements to the Abaqus steady-state transport formulation that now permit converged solutions to be obtained at high speed (including after the development of standing waves in the tire) and (2) Endurica DT self-heating and incremental fatigue simulations that account for thermal effects and for damage accumulation occurring due to a schedule of load cases. The self-heating calculation features the Kraus model and accurately captures viscoelastic loss modulus dependence on strain amplitude and temperature. For each step of the high-speed procedure, steady-state structural and thermal solutions are first computed. The deformation history in the presence of standing waves is shown to require rainflow counting due to the occurrence of multiple load cycles per tire revolution. Crack growth is finally integrated for each potential critical plane through each step of the test until failure is indicated. Standing waves at high speed induce significant self-heating and damage, rapidly limiting high-speed performance. The temperature dependence of self-heating and strength properties also plays a major role in limiting high-speed durability. The simulations were executed on both a flat surface and on the regulation specified 1.7 m diameter road wheel. As expected, durability testing on the road wheel is more severe, and the beneficial effect of a nylon overwrap is predicted.

scholarly journals Vibration modeling of a vehicle equipped with MR damper and aerodynamic elements

2019 ◽  
Vol 20 (1-2) ◽  
pp. 57-61
Author(s):  
Wiesław Grzesikiewicz ◽  
Michał Makowski
Keyword(s):  
High Speed ◽  
Mr Damper ◽  
Road Surface ◽  
Vehicle Model ◽  
Numerical Investigations ◽  
The Road ◽  
Mr Dampers ◽  
On The Road ◽  
Magneto Rheological ◽  
Vibration Modeling

We considered of a vehicle model equipped with controlled magneto-rheological (MR) dampers and controlled aerodynamic elements. The vibrations of the vehicle moving at high speed during acceleration and braking are analysed. The purpose of this analysis is to determine the effect of forces generated on aerodynamic elements on vehicle vibrations and changes in wheel pressure on the road surface during acceleration and braking. The presented work presents the results of numerical investigations obtained on the basis of the developed vehicle model.

scholarly journals Design & Control of Low Cost Solar Tree for Optimizing a PV System

2019 ◽  
Vol 8 (2) ◽  
pp. 5622-5626 ◽  
Keyword(s):  
Urban Areas ◽  
Low Cost ◽  
Point Of View ◽  
Solar Panels ◽  
Pv System ◽  
The Road ◽  
Energy Demands ◽  
On The Road ◽  
Solar Resource ◽  
And Control

This concept shows the design and control of a solar tree PV system for charging cell phones, supplying electricity for street lighting on open urban areas and charging of electric bike on the road side when the charge is decaying. Based on the above applications, a 7 feet height-tree was built. It has three section of branches, each branches contains 5 sub stem over which leaves made of acrylic with solar panels on the top (1.5 feet × 1feet) mounted. The energy storage capacity is 30 Amp. It has 2 USB ports to connect mobile devices and two 12V-300 W electrical outlets to connect those devices to the electricity. The solar tree was designed according to the environmental conditions of Gunupur, Odisha and for optimizing the output power a flow chart with programming developed. The result was compared with the C language programme. At the last, the PV system's availability to satisfy the energetic requirements was verified. Due to population growth and energy demands, the solar energy is the 2nd best source of non conventional energy which is cause pollution free in nature. By using the concept of the series and parallel connection of panel with the help of sub branch of the main stem the efficiency of the system can be improved. As compared to normal PV system in area point of view the Solar tree becomes more efficient. There is no systematic stimulation for usage of solar panels, purely relying on individual cases of installation on different types of objects. Solar tree may be very much helpful for creating awareness about solar resource. This concept elaborates the possibility of building a solar tree in GIET campus odisha, India, covering technical, social and economic aspects. Benefits and potential drawbacks are elaborated, while special emphasis is given to the specifics of its utilization due to the geographical position of odisha and corresponding number of sunny hours/days per year.

Sign in / Sign up

Export Citation Format

Share Document