scholarly journals Shared factory: A new production node for social manufacturing in the context of sharing economy

2019 ◽  
Vol 234 (1-2) ◽  
pp. 285-294 ◽  
Author(s):  
Pingyu Jiang ◽  
Pulin Li
Keyword(s):  
Economic Analysis ◽  
Manufacturing Industry ◽  
Social Innovation ◽  
Value Added ◽  
Sharing Economy ◽  
New Production ◽  
Production Value ◽  
Manufacturing Resources ◽  
Production Orders

Manufacturing industry is heading towards socialization, interconnection and platformization. Motivated by the infiltration of sharing economy usage in manufacturing, this article addresses a new factory model – shared factory, and provides a theoretical architecture and some actual cases for manufacturing sharing. Concepts related to three kinds of shared factories which deal, respectively, with sharing production-orders, manufacturing-resources and manufacturing-capabilities are defined accordingly. These three kinds of shared factory modes can be used for building correspondent sharing manufacturing ecosystems. On the basis of sharing economic analysis, we identify feasible key-enabled technologies for configuring and running a shared factory. At the same time, opportunities and challenges of enabling the shared factory are also analysed in detail. In fact, shared factory, as a new production node, enhances the sharing nature of social manufacturing paradigm, fits the needs of light assets and gives us a new chance to use socialized manufacturing resources. It can be drawn that implementing a shared factory would reach a ‘win-win’ way through production value-added transformation and social innovation.

Design and Techno-Economic Analysis of a Process for Transforming Pig Manure into a Value-Added Product

2008 ◽  
Vol 85 (3) ◽  
pp. 360-368 ◽  
Author(s):  
Mylène Fugère ◽  
Patrice Farand ◽  
Rock Chabot ◽  
Paul Stuart
Keyword(s):  
Economic Analysis ◽  
Value Added ◽  
Pig Manure ◽  
A Value

Value added analysis and trend forecasting in the manufacturing industry in Kaliningrad oblast

2017 ◽  
Vol 28 (2) ◽  
pp. 160-168 ◽  
Author(s):  
N. A. Kazakova ◽  
A. I. Bolvacheva ◽  
A. L. Gendon ◽  
G. F. Golubeva
Keyword(s):  
Manufacturing Industry ◽  
Value Added ◽  
Kaliningrad Oblast ◽  
Trend Forecasting

scholarly journals Techno-Economic Analysis of a Hyaluronic Acid Production Process Utilizing Streptococcal Fermentation

Processes ◽  
2021 ◽  
Vol 9 (2) ◽  
pp. 241
Author(s):  
Rafael G. Ferreira ◽  
Adriano R. Azzoni ◽  
Maria Helena Andrade Santana ◽  
Demetri Petrides
Keyword(s):  
Hyaluronic Acid ◽  
Economic Analysis ◽  
Lower Cost ◽  
Value Added ◽  
Production Costs ◽  
Selling Price ◽  
Baseline Scenario ◽  
Adhesive Properties ◽  
Fed Batch Culture ◽  
Economic Analyses

Hyaluronic acid (HA) is a polysaccharide of alternating d-glucuronic acid and N-acetyl-d-glucosamine residues present in the extracellular matrix of connective, epithelial, and nervous tissues. Due to its singular hydrating, rheological and adhesive properties, HA has found numerous cosmetic and medical applications. However, techno-economic analyses of high value-added bioproducts such as HA are scarce in the literature. Here, we present a techno-economic analysis of a process for producing HA using Streptococcus zooepidemicus, simulated in SuperPro Designer. In the baseline scenario, HA is produced by batch fermentation, reaching 2.5 g/L after 24 h. It is then centrifuged, diafiltered, treated with activated carbon and precipitated with isopropanol. The product is suitable for topical formulations and its production cost was estimated as 1115 $/kg. A similar scenario, based on fed-batch culture and assuming a titer of 5.0 g/L, led to a lower cost of 946 $/kg. Moreover, in two additional scenarios, 10% of the precipitated HA is diverted to the production of a highly pure and high-molecular weight HA, suitable for injectable applications. These scenarios resulted in higher capital and operating costs, but also in higher profits, because HA for injectable use has a higher selling price that more than compensates for its higher production costs.

Implementation of lean in IT SME company: an Italian case

2021 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Marco Torri ◽  
Kaustav Kundu ◽  
Stefano Frecassetti ◽  
Matteo Rossini
Keyword(s):  
Manufacturing Industry ◽  
Service Sector ◽  
Manufacturing Sector ◽  
Single Case ◽  
Value Added ◽  
Lean Implementation ◽  
Content Type ◽  
Italian Case ◽  
Lean Practices

Purpose In spite of huge advancement of Lean in the manufacturing sector, its advantage in the service sector is not fully investigated. The purpose of this paper is to cover this gap in particular for the information technology (IT) sector through the implementation of the Lean philosophy in a small- and medium-sized enterprise (SME), operating in the IT sector. Design/methodology/approach A case study is conducted and following the A3 model, Lean is deployed in the case company. Data were collected through on-site interviews, waste sources were identified and then countermeasures for their reduction were proposed and adopted. Findings This study reveals that the implementation of the Lean practices in an SME operating in the IT sector offers good operative and financial results, thanks to the higher productivity obtained through the reduction of non-value-added activities. Research limitations/implications This paper reports a single case study, not enough to generalize the results. Moreover, more Lean tools and practices should be tested in IT companies to assess their effectiveness. Practical implications This paper increments the knowledge base for the application of Lean and A3 model outside the manufacturing industry. This paper should assist practitioners and consultants who have the desire to understand a better way of Lean implementation in fast-growing IT industry and in SME. Originality/value Research on Lean implementation in an SME company and in IT sector is scarce. This study aims to assess the efficiency of the adoption of Lean practices following the A3 model. The results could be highly valuable for similar companies (dimension or sector), especially those that are facing transition situations in terms of size and at the same time want to improve their operations performance, efficiency and avoid waste.

Border Trade between Regions of Russia and Provinces of China

2021 ◽  
Vol 20 (10) ◽  
pp. 103-116
Author(s):  
Natalya S. Epifanova ◽  
Vladimir N. Akulinin
Keyword(s):  
Manufacturing Industry ◽  
Raw Materials ◽  
Value Added ◽  
Raw Material ◽  
Structural Development ◽  
Regional Economies ◽  
Russian Regions ◽  
Goods And Services ◽  
Border Trade ◽  
Regions Of Russia

The purpose of this article is to study border trade in the regions of Russia and the provinces of China. It is shown that in recent years there have been negative trends in border trade, leading to its reduction. Therefore, Russian regions bordering with China should transform into separate objects of regional policy, while also forming a legislative framework for border interaction in all its main spheres: trade, humanitarian cooperation, science and education, and others. In border cooperation with China, special emphasis should be placed on cooperation in the innovation sphere, as well as on improving the quality of exported goods and services and promoting infrastructure projects. Border trade between the regions of Russia and China is built mainly on trade and export of labour resources from China to Russia, as well as China’s receipt of additional sales channels for the confidently growing sales markets for consumer goods and sources of raw materials and primary products. The interaction of Russian regions with neighbouring provinces on the border with China not only preserves the raw material orientation of these regions, but also hinders the development and strengthening of the manufacturing industry in the structure of their regional economies, since border interaction for Russian regions immobilizes those stages of value-added production observed in the very first stages. In general, for the Chinese provinces there is a similar problem associated with such exports to border regions that have common borders with Russia, which does not contribute to the diversification and structural development of the regional economies of the Chinese provinces. That is why building an effective mechanism for border interaction between Russia and China is a strategically important issue for both countries.

Influencing Factors and Decoupling Analysis of Carbon Emissions in China's Manufacturing Industry

2021 ◽  
Author(s):  
baoling jin ◽  
ying Han
Keyword(s):  
Carbon Emissions ◽  
Manufacturing Industry ◽  
Energy Intensity ◽  
Value Added ◽  
Carbon Intensity ◽  
Energy Structure ◽  
Investment Efficiency ◽  
Fixed Asset ◽  
Carbon Productivity ◽  
Fixed Asset Investment

Abstract The manufacturing industry directly reflects national productivity, and it is also an industry with serious carbon emissions, which has attracted wide attention. This study decomposes the influential factors on carbon emissions in China’s manufacturing industry from 1995 to 2018 into industry value added (IVA), energy consumption (E), fixed asset investment (FAI), carbon productivity (CP), energy structure (EC), energy intensity (EI), investment carbon intensity (ICI) and investment efficiency (IE) by Generalized Divisia Index Model (GDIM). The decoupling analysis is carried out to investigate the decoupling states of the manufacturing industry under the pressure of "low carbon" and "economy.” Considering the technological heterogeneity, we study the influential factors and decoupling status of the light industry and the heavy industry. The results show that: (1) Carbon emissions of the manufacturing industry present an upward trend, and the heavy industry is the main contributor. (2) Fixed asset investment (FAI), industry value added (IVA) are the driving forces of carbon emissions. Investment carbon intensity (ICI), carbon productivity (CP), investment efficiency (IE), and energy intensity (EI) have inhibitory effects. The impact of the energy consumption (E) and energy structure (EC) are fluctuating. (3) The decoupling state of the manufacturing industry has improved. Fixed asset investment (FAI), industry value added (IVA) hinder the decoupling; carbon productivity (CP), investment carbon intensity (ICI), investment efficiency (IE), and energy intensity (EI) promote the decoupling.

scholarly journals Using a Novel Grey DANP Model to Identify Interactions between Manufacturing and Logistics Industries in China

2018 ◽  
Vol 10 (10) ◽  
pp. 3456 ◽  
Author(s):  
Peng Jiang ◽  
Yi-Chung Hu ◽  
Ghi-Feng Yen ◽  
Hang Jiang ◽  
Yu-Jing Chiu
Keyword(s):  
Manufacturing Industry ◽  
Multiple Criteria Decision Making ◽  
Value Added ◽  
Manufacturing Industries ◽  
Direct Influence ◽  
Key Factors ◽  
Logistics Industry ◽  
Influence Matrix ◽  
Factors Affecting ◽  
Two Factors

As a crucial part of producer services, the logistics industry is highly dependent on the manufacturing industry. In general, the interactive development of the logistics and manufacturing industries is essential. Due to the existence of a certain degree of interdependence between any two factors, interaction between the two industries has produced a basis for measurement; identifying the key factors affecting the interaction between the manufacturing and logistics industries is a kind of decision problem in the field of multiple criteria decision making (MCDM). A hybrid MCDM method, DEMATEL-based ANP (DANP) is appropriate to solve this problem. However, DANP uses a direct influence matrix, which involves pairwise comparisons that may be more or less influenced by the respondents. Therefore, we propose a decision model, Grey DANP, which can automatically generate the direct influence matrix. Statistical data for the logistics and manufacturing industries in the China Statistical Yearbook (2006–2015) were used to identify the key factors for interaction between these two industries. The results showed that the key logistics criteria for interaction development are the total number of employees in the transport business, the volume of goods, and the total length of routes. The key manufacturing criteria for interaction development are the gross domestic product and the value added. Therefore, stakeholders should increase the number of employees in the transport industry and freight volumes. Also, the investment in infrastructure should be increased.

Differentiating aspects of product innovation processes in the food industry

2014 ◽  
Vol 116 (8) ◽  
pp. 1346-1368 ◽  
Author(s):  
Rao Sanaullah Khan ◽  
John Vincent Grigor ◽  
Alan G. Win ◽  
Mike Boland
Keyword(s):  
New Zealand ◽  
Manufacturing Industry ◽  
Value Added ◽  
Manufacturing Companies ◽  
Food Manufacturing ◽  
Content Type ◽  
Significant Difference ◽  
Group 2 ◽  
Innovation Processes ◽  
Group 1

Purpose – The purpose of this paper is to sketch a comparative account of NPD approaches between registered New Zealand food companies that are doing some sort of functional foods (FF) development (Group 1) and those that are not (Group 2); to generate a better understanding of differences and commonalities in their NPD approaches from resource-based view of competitive advantage. Design/methodology/approach – This paper opted an exploratory approach using a quantitative survey across food manufacturing companies in New Zealand. The primary foci of this empirical investigation were: orientation towards the NPD, innovation processes, collaborative NPD links and routes to commercialisation. Findings – The results (based on a 22 per cent response rate) show a significant difference (p<0.05) in the aims and mode of NPD between Groups 1 and 2. Further it was observed that food companies in Group 1 have significantly (p<0.05) more diverse external collaborations with broader aims to collaborate, in comparison with food companies in Group 2. Research limitations/implications – This study was conducted in New Zealand and thus generalisability of the findings may have to be interpreted carefully. Practical implications – The traditional NPD approach (independent and closed NPD), with loose intellectual property protection practices, dominates the food manufacturing industry in New Zealand. Research-oriented collaborations need to be strengthened in their scope and content to develop the innovative capabilities and capacities of small and medium enterprises (SME's) within future value-added food productions. Originality/value – This research provides the comparative narration of innovation process of food manufacturing companies with reference to FFs development.

scholarly journals The intersectoral linkage effects in Turkish economy: an application of static Leontief model

2009 ◽  
Vol 56 (3) ◽  
pp. 301-326
Author(s):  
Yay Gürkan ◽  
Serkan Keçeli
Keyword(s):  
Extraction Method ◽  
Manufacturing Industry ◽  
Value Added ◽  
The Other ◽  
Input Output ◽  
General Equilibrium Theory ◽  
Traditional Methods ◽  
Turkish Economy ◽  
Leontief Model ◽  
Linkage Effects

In this study, the leading activities of Turkish Economy whose changes in their structure of production, value-added and employment are interrelated with the other activities of the economy, are found by using the input-output model which is presented and called as an 'Application of the General Equilibrium Theory' by Leontief. For this purpose; firstly theoretical foundations of the input-output model are examined. After that, 59 activities of the 2002 Input-Output Table of the Turkish Economy are aggregated at 52 sectors and classified into three categories as Ricardo Sectors, High-Technology Sectors and Heckscher-Ohlin Sectors like Dasgupta and Chakraborty did for the Indian Economy in 2005. Then, the leading, key or strong activities of the economy that are more interrelated with other activities are calculated and found by the Static Leontief Model which is used by the Traditional Methods as the techniques to calculate the linkage effects like Chenery-Watanabe and Rasmussen methods to determine the sectors having the highest priority at investment policies according to the Hirschmanian Unbalanced Growth Model. As a result of the interpretation of Leontief Model, using the traditional methods of Chenery-Watanabe and Rasmussen while calculating the linkage effects rather than the hypothesis extraction methods like Strassert's Original Extraction Method, Cella's Extraction Method, Sonis' Pure Linkage Method and Dietzenbacher and Van der Linden's Method or a SAM (Social Accounting Method) model which does not omit the income generating process (distributing income among primary factors and households as a result of production) of a sector, in Turkey, the Heckscher-Ohlin Sectors mostly seen in the manufacturing industry which Kaldor refers as the engine of growth, are stronger than the other sectors.

scholarly journals PERSPEKTIF KELEMBAGAAN DIREKTORAT JENDERAL BEA DAN CUKAI (DJBC) DALAM BIDANG PELAYANAN KEMUDAHAN IMPOR TUJUAN EKSPOR (KITE) DI INDONESIA (Institutional Perspective of Directorate General of Customs And Excise in Ease of Import For Export Purposes (KITE), In Indonesia)

2016 ◽  
Vol 16 (1) ◽  
pp. 105
Author(s):  
Djafar Albram
Keyword(s):  
Market Integration ◽  
Manufacturing Industry ◽  
Value Added ◽  
Global Market ◽  
Import Duty ◽  
Value Added Tax ◽  
Institutional Perspective ◽  
Business Interests ◽  
Directorate General ◽  
Technology Transformation

The policy of free trading can be observed by promoting the economy competitiveness of a country through global market integration. One of the integrations that is dynamic of service policy in ease of import for export purposes (KITE) of business interests to those who invest in Indonesia which managed by Directorate General of Customs and Excise (DJBC) that facility return of import duty (BM), or Customs and value-added tax (PPn) and value-added tax of import duty especially other commodities for export purposes. By facilitating that, it is hoped can improve and increase the trading value of export tax revenues,create jobs and then, it makes technology transformation exchange for development of human resources quality of manufacturing industry which running the business in ease of import for export purposes (KITE), in Indonesia. Keywords: KITE, customs and excise, ABSTRAKAdanya kebijakan Perdagangan bebas dapat dilihat dengan upaya peningkatan daya saing ekonomi suatunegara, melalui integrasi pasar global. Salah satu bentuk integrasi dimaksud yaitu adanya dinamika kebijakan pelayanan Kemudahan Impor Tujuan Ekspor yang dikenal dengan istilah (KITE) bagi kepentingan kelancaran usaha bisnis para Investor yang menanamkan Investasinya di Indonesia yang penangganannya ditangani  oleh Institusi Direktorat Jenderal Bea dan Cukai (DJBC) yang memberikan kemudahan fasilitas dalam bidang Pengembalian Bea Masuk (BM), atau Cukai serta PPn dan PPn BM terutama bagi komoditas lainnya yang hasil akhirnya adalah tujuan Ekspor. Dengan pemberian fasilitas tersebut, diharapkan terjadinya peningkatan nilai perdagangan dari penerimaan Pajak Ekspor, Membuka usaha lapangan kerja dan pada gilirannya akan terjadi alih transformasi tehnologi bagi kepentingan peningkatan kualitas Sumber Daya Manusia pekerja  Industri Manufaktur yang bergerak di bidang usaha   KITE di Indonesia. Kata Kunci: KITE menciptakan Iklim Usaha Kondusif.

Sign in / Sign up

Export Citation Format

Share Document