scholarly journals Design of 1-year mortality forecast at hospital admission: A machine learning approach

2021 ◽  
Vol 27 (1) ◽  
pp. 146045822098758
Author(s):  
Vicent Blanes-Selva ◽  
Vicente Ruiz-García ◽  
Salvador Tortajada ◽  
José-Miguel Benedí ◽  
Bernardo Valdivieso ◽  
...  
Keyword(s):  
Machine Learning ◽  
Palliative Care ◽  
Hospital Admission ◽  
Machine Learning Techniques ◽  
Gradient Boosting ◽  
Standard Procedures ◽  
Learning Techniques ◽  
Machine Learning Approach ◽  
Using Data

Palliative care is referred to a set of programs for patients that suffer life-limiting illnesses. These programs aim to maximize the quality of life (QoL) for the last stage of life. They are currently based on clinical evaluation of the risk of 1-year mortality. The main aim of this work is to develop and validate machine-learning-based models to predict the exitus of a patient within the next year using data gathered at hospital admission. Five machine-learning techniques were applied using a retrospective dataset. The evaluation was performed with five metrics computed by a resampling strategy: Accuracy, the area under the ROC curve, Specificity, Sensitivity, and the Balanced Error Rate. All models reported an AUC ROC from 0.857 to 0.91. Specifically, Gradient Boosting Classifier was the best model, producing an AUC ROC of 0.91, a sensitivity of 0.858, a specificity of 0.808, and a BER of 0.1687. Information from standard procedures at hospital admission combined with machine learning techniques produced models with competitive discriminative power. Our models reach the best results reported in the state of the art. These results demonstrate that they can be used as an accurate data-driven palliative care criteria inclusion.

scholarly journals A Machine-Learning Approach to Distinguish Passengers and Drivers Reading While Driving

Sensors ◽  
2019 ◽  
Vol 19 (14) ◽  
pp. 3174 ◽  
Author(s):  
Renato Torres ◽  
Orlando Ohashi ◽  
Gustavo Pessin
Keyword(s):  
Neural Network ◽  
Machine Learning ◽  
Traffic Accidents ◽  
Driver Distraction ◽  
Machine Learning Techniques ◽  
Gradient Boosting ◽  
Learning Approach ◽  
Learning Techniques ◽  
Machine Learning Approach ◽  
Smartphone Sensors

Driver distraction is one of the major causes of traffic accidents. In recent years, given the advance in connectivity and social networks, the use of smartphones while driving has become more frequent and a serious problem for safety. Texting, calling, and reading while driving are types of distractions caused by the use of smartphones. In this paper, we propose a non-intrusive technique that uses only data from smartphone sensors and machine learning to automatically distinguish between drivers and passengers while reading a message in a vehicle. We model and evaluate seven cutting-edge machine-learning techniques in different scenarios. The Convolutional Neural Network and Gradient Boosting were the models with the best results in our experiments. Results show accuracy, precision, recall, F1-score, and kappa metrics superior to 0.95.

Modeling Relevance Relations Using Machine Learning Techniques

2011 ◽  
pp. 168-207
Author(s):  
Jelber Sayyad Shirabad ◽  
Timothy C. Lethbridge ◽  
Stan Matwin
Keyword(s):  
Machine Learning ◽  
Empirical Evaluation ◽  
Machine Learning Techniques ◽  
Learning Techniques ◽  
Software Engineers ◽  
Field Deployment ◽  
Complex Relationships ◽  
Using Data

This chapter presents the notion of relevance relations, an abstraction to represent relationships between software entities. Relevance relations map tuples of software entities to values that reflect how related they are to each other. Although there are no clear definitions for these relationships, software engineers can typically identify instances of these complex relationships. We show how a classifier can model a relevance relation. We also present the process of creating such models by using data mining and machine learning techniques. In a case study, we applied this process to a large legacy system; our system learned models of a relevance relation that predict whether a change in one file may require a change in another file. Our empirical evaluation shows that the predictive quality of such models makes them a viable choice for field deployment. We also show how by assigning different misclassification costs such models can be tuned to meet the needs of the user in terms of their precision and recall.

A Brief Survey on Text Classification Using Various Machine Learning Techniques

2018 ◽  
Vol 8 (1) ◽  
pp. 14
Author(s):  
Padmavathi .S ◽  
M. Chidambaram
Keyword(s):  
Machine Learning ◽  
Text Classification ◽  
Fixed Number ◽  
Machine Learning Techniques ◽  
Online Information ◽  
Rule Based ◽  
Learning Techniques ◽  
Machine Learning Approach ◽  
Rule Based Approach

Text classification has grown into more significant in managing and organizing the text data due to tremendous growth of online information. It does classification of documents in to fixed number of predefined categories. Rule based approach and Machine learning approach are the two ways of text classification. In rule based approach, classification of documents is done based on manually defined rules. In Machine learning based approach, classification rules or classifier are defined automatically using example documents. It has higher recall and quick process. This paper shows an investigation on text classification utilizing different machine learning techniques.

A Literature Review Study of Software Defect Prediction using Machine Learning Techniques

2018 ◽  
Vol 6 (6) ◽  
pp. 300 ◽  
Author(s):  
Feidu Akmel ◽  
Ermiyas Birihanu ◽  
Bahir Siraj
Keyword(s):  
Machine Learning ◽  
Software Metrics ◽  
Quality Standard ◽  
Machine Learning Techniques ◽  
Software Systems ◽  
Health Care Insurance ◽  
Software Defect ◽  
Learning Techniques ◽  
Software Product

Software systems are any software product or applications that support business domains such as Manufacturing,Aviation, Health care, insurance and so on.Software quality is a means of measuring how software is designed and how well the software conforms to that design. Some of the variables that we are looking for software quality are Correctness, Product quality, Scalability, Completeness and Absence of bugs, However the quality standard that was used from one organization is different from other for this reason it is better to apply the software metrics to measure the quality of software. Attributes that we gathered from source code through software metrics can be an input for software defect predictor. Software defect are an error that are introduced by software developer and stakeholders. Finally, in this study we discovered the application of machine learning on software defect that we gathered from the previous research works.

Selecting optimal SpMV realizations for GPUs via machine learning

2021 ◽  
pp. 109434202199073
Author(s):  
Ernesto Dufrechou ◽  
Pablo Ezzatti ◽  
Enrique S Quintana-Ortí
Keyword(s):  
Machine Learning ◽  
Sparse Matrix ◽  
Machine Learning Techniques ◽  
Optimal Method ◽  
Learning Techniques ◽  
General Rules ◽  
Machine Learning Approach ◽  
The Matrix ◽  
Time And Energy ◽  
Matrix Vector

More than 10 years of research related to the development of efficient GPU routines for the sparse matrix-vector product (SpMV) have led to several realizations, each with its own strengths and weaknesses. In this work, we review some of the most relevant efforts on the subject, evaluate a few prominent routines that are publicly available using more than 3000 matrices from different applications, and apply machine learning techniques to anticipate which SpMV realization will perform best for each sparse matrix on a given parallel platform. Our numerical experiments confirm the methods offer such varied behaviors depending on the matrix structure that the identification of general rules to select the optimal method for a given matrix becomes extremely difficult, though some useful strategies (heuristics) can be defined. Using a machine learning approach, we show that it is possible to obtain unexpensive classifiers that predict the best method for a given sparse matrix with over 80% accuracy, demonstrating that this approach can deliver important reductions in both execution time and energy consumption.

scholarly journals Feasibility of Machine Learning Algorithms for Predicting the Deformation of Anodic Titanium Films by Modulating Anodization Processes

Materials ◽  
2021 ◽  
Vol 14 (5) ◽  
pp. 1089
Author(s):  
Sung-Hee Kim ◽  
Chanyoung Jeong
Keyword(s):  
Machine Learning ◽  
Learning Algorithms ◽  
Multiclass Classification ◽  
Machine Learning Algorithms ◽  
Machine Learning Techniques ◽  
Smart Manufacturing ◽  
Gradient Boosting ◽  
Experimental Conditions ◽  
Learning Techniques ◽  
Tio2 Nanostructures

This study aims to demonstrate the feasibility of applying eight machine learning algorithms to predict the classification of the surface characteristics of titanium oxide (TiO2) nanostructures with different anodization processes. We produced a total of 100 samples, and we assessed changes in TiO2 nanostructures’ thicknesses by performing anodization. We successfully grew TiO2 films with different thicknesses by one-step anodization in ethylene glycol containing NH4F and H2O at applied voltage differences ranging from 10 V to 100 V at various anodization durations. We found that the thicknesses of TiO2 nanostructures are dependent on anodization voltages under time differences. Therefore, we tested the feasibility of applying machine learning algorithms to predict the deformation of TiO2. As the characteristics of TiO2 changed based on the different experimental conditions, we classified its surface pore structure into two categories and four groups. For the classification based on granularity, we assessed layer creation, roughness, pore creation, and pore height. We applied eight machine learning techniques to predict classification for binary and multiclass classification. For binary classification, random forest and gradient boosting algorithm had relatively high performance. However, all eight algorithms had scores higher than 0.93, which signifies high prediction on estimating the presence of pore. In contrast, decision tree and three ensemble methods had a relatively higher performance for multiclass classification, with an accuracy rate greater than 0.79. The weakest algorithm used was k-nearest neighbors for both binary and multiclass classifications. We believe that these results show that we can apply machine learning techniques to predict surface quality improvement, leading to smart manufacturing technology to better control color appearance, super-hydrophobicity, super-hydrophilicity or batter efficiency.

Machine learning techniques based on security management in smart cities using robots

Work ◽  
2021 ◽  
pp. 1-12
Author(s):  
Zhang Mengqi ◽  
Wang Xi ◽  
V.E. Sathishkumar ◽  
V. Sivakumar
Keyword(s):  
Machine Learning ◽  
Information And Communication Technologies ◽  
Smart City ◽  
Smart Cities ◽  
Security Management ◽  
Machine Learning Techniques ◽  
Quality Of Services ◽  
Learning Techniques ◽  
Learning Concept

BACKGROUND: Nowadays, the growth of smart cities is enhanced gradually, which collects a lot of information and communication technologies that are used to maximize the quality of services. Even though the intelligent city concept provides a lot of valuable services, security management is still one of the major issues due to shared threats and activities. For overcoming the above problems, smart cities’ security factors should be analyzed continuously to eliminate the unwanted activities that used to enhance the quality of the services. OBJECTIVES: To address the discussed problem, active machine learning techniques are used to predict the quality of services in the smart city manages security-related issues. In this work, a deep reinforcement learning concept is used to learn the features of smart cities; the learning concept understands the entire activities of the smart city. During this energetic city, information is gathered with the help of security robots called cobalt robots. The smart cities related to new incoming features are examined through the use of a modular neural network. RESULTS: The system successfully predicts the unwanted activity in intelligent cities by dividing the collected data into a smaller subset, which reduces the complexity and improves the overall security management process. The efficiency of the system is evaluated using experimental analysis. CONCLUSION: This exploratory study is conducted on the 200 obstacles are placed in the smart city, and the introduced DRL with MDNN approach attains maximum results on security maintains.

scholarly journals Predictors of outpatients’ no-show: big data analytics using apache spark

2020 ◽  
Vol 7 (1) ◽  
Author(s):  
Tahani Daghistani ◽  
Huda AlGhamdi ◽  
Riyad Alshammari ◽  
Raed H. AlHazme
Keyword(s):  
Machine Learning ◽  
Big Data ◽  
Negative Impact ◽  
Big Data Analytics ◽  
Quality Of Healthcare ◽  
Machine Learning Techniques ◽  
Gradient Boosting ◽  
Healthcare Organizations ◽  
Data Framework ◽  
Learning Techniques

AbstractOutpatients who fail to attend their appointments have a negative impact on the healthcare outcome. Thus, healthcare organizations facing new opportunities, one of them is to improve the quality of healthcare. The main challenges is predictive analysis using techniques capable of handle the huge data generated. We propose a big data framework for identifying subject outpatients’ no-show via feature engineering and machine learning (MLlib) in the Spark platform. This study evaluates the performance of five machine learning techniques, using the (2,011,813‬) outpatients’ visits data. Conducting several experiments and using different validation methods, the Gradient Boosting (GB) performed best, resulting in an increase of accuracy and ROC to 79% and 81%, respectively. In addition, we showed that exploring and evaluating the performance of the machine learning models using various evaluation methods is critical as the accuracy of prediction can significantly differ. The aim of this paper is exploring factors that affect no-show rate and can be used to formulate predictions using big data machine learning techniques.

Improving Reliability Estimation for Individual Numeric Predictions: A Machine Learning Approach

2021 ◽  
Author(s):  
Gediminas Adomavicius ◽  
Yaqiong Wang
Keyword(s):  
Machine Learning ◽  
General Purpose ◽  
Reliability Estimation ◽  
Machine Learning Techniques ◽  
Data Sets ◽  
Real World Data ◽  
Learning Techniques ◽  
Reliability Indicator ◽  
Machine Learning Approach ◽  
Prediction Reliability

Numerical predictive modeling is widely used in different application domains. Although many modeling techniques have been proposed, and a number of different aggregate accuracy metrics exist for evaluating the overall performance of predictive models, other important aspects, such as the reliability (or confidence and uncertainty) of individual predictions, have been underexplored. We propose to use estimated absolute prediction error as the indicator of individual prediction reliability, which has the benefits of being intuitive and providing highly interpretable information to decision makers, as well as allowing for more precise evaluation of reliability estimation quality. As importantly, the proposed reliability indicator allows the reframing of reliability estimation itself as a canonical numeric prediction problem, which makes the proposed approach general-purpose (i.e., it can work in conjunction with any outcome prediction model), alleviates the need for distributional assumptions, and enables the use of advanced, state-of-the-art machine learning techniques to learn individual prediction reliability patterns directly from data. Extensive experimental results on multiple real-world data sets show that the proposed machine learning-based approach can significantly improve individual prediction reliability estimation as compared with a number of baselines from prior work, especially in more complex predictive scenarios.

Machine Learning for Neurodegenerative Disorder Diagnosis — Survey of Practices and Launch of Benchmark Dataset

2018 ◽  
Vol 27 (03) ◽  
pp. 1850011 ◽  
Author(s):  
Athanasios Tagaris ◽  
Dimitrios Kollias ◽  
Andreas Stafylopatis ◽  
Georgios Tagaris ◽  
Stefanos Kollias
Keyword(s):  
Machine Learning ◽  
Neurodegenerative Disorder ◽  
Developed Countries ◽  
Machine Learning Techniques ◽  
Network Architectures ◽  
Imaging Data ◽  
Learning Techniques ◽  
Medical Examinations

Neurodegenerative disorders, such as Alzheimer’s and Parkinson’s, constitute a major factor in long-term disability and are becoming more and more a serious concern in developed countries. As there are, at present, no effective therapies, early diagnosis along with avoidance of misdiagnosis seem to be critical in ensuring a good quality of life for patients. In this sense, the adoption of computer-aided-diagnosis tools can offer significant assistance to clinicians. In the present paper, we provide in the first place a comprehensive recording of medical examinations relevant to those disorders. Then, a review is conducted concerning the use of Machine Learning techniques in supporting diagnosis of neurodegenerative diseases, with reference to at times used medical datasets. Special attention has been given to the field of Deep Learning. In addition to that, we communicate the launch of a newly created dataset for Parkinson’s disease, containing epidemiological, clinical and imaging data, which will be publicly available to researchers for benchmarking purposes. To assess the potential of the new dataset, an experimental study in Parkinson’s diagnosis is carried out, based on state-of-the-art Deep Neural Network architectures and yielding very promising accuracy results.

Sign in / Sign up

Export Citation Format

Share Document