Adaptive calibration of Diesel engine injection for minimising fuel consumption with constrained NOx emissions in actual driving missions

2020 ◽  
pp. 146808742091880
Author(s):  
José Manuel Luján ◽  
Benjamín Pla ◽  
Pau Bares ◽  
Varun Pandey
Keyword(s):  
Diesel Engine ◽  
Fuel Consumption ◽  
Time Window ◽  
Transition Probability ◽  
Estimation Method ◽  
Engine Performance ◽  
Driving Cycle ◽  
Vehicle Speed ◽  
Adaptive Calibration ◽  
Emission Limits

This article proposes a method for fuel minimisation of a Diesel engine with constrained [Formula: see text] emission in actual driving mission. Specifically, the methodology involves three developments: The first is a driving cycle prediction tool which is based on the space-variant transition probability matrix obtained from an actual vehicle speed dataset. Then, a vehicle and an engine model is developed to predict the engine performance depending on the calibration for the estimated driving cycle. Finally, a controller is proposed which adapts the start-of-injection calibration map to fulfil the [Formula: see text] emission constraint while minimising the fuel consumption. The calibration is adapted during a predefined time window based on the predicted engine performance on the estimated cycle and the difference between the actual and the constraint on engine [Formula: see text] emissions. The method assessment was done experimentally in the engine test set-up. The engine performace using the method is compared with the state-of-the-art static calibration method for different [Formula: see text] emission limits on real driving cycles. The online implementation of the method shows that the fuel consumption can be reduced by 3%–4% while staying within the emission limits, indicating that the estimation method is able to capture the main driving cycle characterstics.

Two-Stroke Marine Diesel Engine Variable Injection Timing System Performance Evaluation and Optimum Setting for Minimum Fuel Consumption at Acceptable NOx Levels

2014 ◽  
Author(s):  
Dimitrios T. Hountalas ◽  
Spiridon Raptotasios ◽  
Antonis Antonopoulos ◽  
Stavros Daniolos ◽  
Iosif Dolaptzis ◽  
...  
Keyword(s):  
Diesel Engine ◽  
Fuel Consumption ◽  
Engine Performance ◽  
Operating Conditions ◽  
Specific Fuel Consumption ◽  
Injection Timing ◽  
Nox Emissions ◽  
Pressure Measurements ◽  
Cylinder Pressure ◽  
Start Of Injection

Currently the most promising solution for marine propulsion is the two-stroke low-speed diesel engine. Start of Injection (SOI) is of significant importance for these engines due to its effect on firing pressure and specific fuel consumption. Therefore these engines are usually equipped with Variable Injection Timing (VIT) systems for variation of SOI with load. Proper operation of these systems is essential for both safe engine operation and performance since they are also used to control peak firing pressure. However, it is rather difficult to evaluate the operation of VIT system and determine the required rack settings for a specific SOI angle without using experimental techniques, which are extremely expensive and time consuming. For this reason in the present work it is examined the use of on-board monitoring and diagnosis techniques to overcome this difficulty. The application is conducted on a commercial vessel equipped with a two-stroke engine from which cylinder pressure measurements were acquired. From the processing of measurements acquired at various operating conditions it is determined the relation between VIT rack position and start of injection angle. This is used to evaluate the VIT system condition and determine the required settings to achieve the desired SOI angle. After VIT system tuning, new measurements were acquired from the processing of which results were derived for various operating parameters, i.e. brake power, specific fuel consumption, heat release rate, start of combustion etc. From the comparative evaluation of results before and after VIT adjustment it is revealed an improvement of specific fuel consumption while firing pressure remains within limits. It is thus revealed that the proposed method has the potential to overcome the disadvantages of purely experimental trial and error methods and that its use can result to fuel saving with minimum effort and time. To evaluate the corresponding effect on NOx emissions, as required by Marpol Annex-VI regulation a theoretical investigation is conducted using a multi-zone combustion model. Shop-test and NOx-file data are used to evaluate its ability to predict engine performance and NOx emissions before conducting the investigation. Moreover, the results derived from the on-board cylinder pressure measurements, after VIT system tuning, are used to evaluate the model’s ability to predict the effect of SOI variation on engine performance. Then the simulation model is applied to estimate the impact of SOI advance on NOx emissions. As revealed NOx emissions remain within limits despite the SOI variation (increase).

The WLTC vs NEDC: A Case Study on the Impacts of Driving Cycle on Engine Performance and Fuel Consumption

2021 ◽  
Vol 18 (3) ◽  
pp. 9071-9081
Author(s):  
Jakub Lasocki
Keyword(s):  
Fuel Consumption ◽  
Combustion Engine ◽  
Engine Performance ◽  
Driving Cycle ◽  
Performance Characteristics ◽  
Pollutant Emission ◽  
Strong Impact ◽  
Light Duty ◽  
Light Duty Vehicles

The World-wide harmonised Light-duty Test Cycle (WLTC) was developed internationally for the determination of pollutant emission and fuel consumption from combustion engines of light-duty vehicles. It replaced the New European Driving Cycle (NEDC) used in the European Union (EU) for type-approval testing purposes. This paper presents an extensive comparison of the WLTC and NEDC. The main specifications of both driving cycles are provided, and their advantages and limitations are analysed. The WLTC, compared to the NEDC, is more dynamic, covers a broader spectrum of engine working states and is more realistic in simulating typical real-world driving conditions. The expected impact of the WLTC on vehicle engine performance characteristics is discussed. It is further illustrated by a case study on two light-duty vehicles tested in the WLTC and NEDC. Findings from the investigation demonstrated that the driving cycle has a strong impact on the performance characteristics of the vehicle combustion engine. For the vehicles tested, the average engine speed, engine torque and fuel flow rate measured over the WLTC are higher than those measured over the NEDC. The opposite trend is observed in terms of fuel economy (expressed in l/100 km); the first vehicle achieved a 9% reduction, while the second – a 3% increase when switching from NEDC to WLTC. Several factors potentially contributing to this discrepancy have been pointed out. The implementation of the WLTC in the EU will force vehicle manufacturers to optimise engine control strategy according to the operating range of the new driving cycle.

scholarly journals Comparison of the Emissions, Noise, and Fuel Consumption Comparison of Direct and Indirect Piezoelectric and Solenoid Injectors in a Low-Compression-Ratio Diesel Engine

Energies ◽  
2019 ◽  
Vol 12 (21) ◽  
pp. 4023 ◽  
Author(s):  
Stefano d’Ambrosio ◽  
Alessandro Ferrari ◽  
Alessandro Mancarella ◽  
Salvatore Mancò ◽  
Antonio Mittica
Keyword(s):  
Diesel Engine ◽  
Fuel Consumption ◽  
Compression Ratio ◽  
Fuel Injection ◽  
Engine Performance ◽  
Combustion Noise ◽  
Driving System ◽  
Performance And Emissions ◽  
Direct Acting ◽  
Engine Performance And Emissions

An experimental investigation has been carried out to compare the performance and emissions of a low-compression-ratio Euro 5 diesel engine featuring high EGR rates, equipped with different injector technologies, i.e., solenoid, indirect-acting, and direct-acting piezoelectric. The comparisons, performed with reference to a state-of-the-art double fuel injection calibration, i.e., pilot-Main (pM), are presented in terms of engine-out exhaust emissions, combustion noise (CN), and fuel consumption, at low–medium engine speeds and loads. The differences in engine performance and emissions of the solenoidal, indirect-acting, and direct-acting piezoelectric injector setups have been found on the basis of experimental results to mainly depend on the specific features of their hydraulic circuits rather than on the considered injector driving system.

Parameter optimization of a diesel engine to reduce noise, fuel consumption, and exhaust emissions using response surface methodology

2005 ◽  
Vol 219 (10) ◽  
pp. 1181-1192 ◽  
Author(s):  
Z Win ◽  
R P Gakkhar ◽  
S C Jain ◽  
M Bhattacharya
Keyword(s):  
Response Surface Methodology ◽  
Diesel Engine ◽  
Response Surface ◽  
Fuel Consumption ◽  
Parameter Optimization ◽  
Direct Injection ◽  
Engine Performance ◽  
Optimization Techniques ◽  
Injection Timing ◽  
Test Engine

The conflicting effects of the operating parameters and the injection parameter (injection timing) on engine performance and environmental pollution factors is studied in this paper. As an optimization objective, a 3.5 kW small direct injection diesel engine was used as the test engine, and its speed, load, and static injection timing were varied as per 4 × 4 × 3 full factorial design array. Radiated engine noise, smoke level, brake specific fuel consumption, and emissions of unburned hydrocarbons and nitrogen oxides were captured for all test runs. Objective functions relating input and output parameters were obtained using response surface methodology (RSM). Parameter optimization was carried out to control output responses under their mean limit using multi-objective goal programming and minimax programming optimization techniques.

Effects of Micro-Emulsion Fuels on the Performance and Emissions of Diesel Engine

2011 ◽  
Vol 236-238 ◽  
pp. 151-154 ◽  
Author(s):  
Jia Quan Wang ◽  
Ping Sun ◽  
Zhen Chen ◽  
De Qing Mei
Keyword(s):  
Diesel Engine ◽  
Fuel Consumption ◽  
Engine Performance ◽  
Specific Fuel Consumption ◽  
Performance And Emissions ◽  
Micro Emulsion ◽  
Effects Of Temperature ◽  
The Stability

The micro-emulsion fuels were prepared with complex surfactant, and the effects of temperature on the stability of these fuels were investigated. The engine performance and the emissions were studied when the engine was fueled with diesel and micro-emulsion diesel respectively. Results showed that when the engine was fueled with micro-emulsion diesel, the NOXand smoke emissions were decreased obviously and HC and CO emissions were increased slightly. Discounting of surfactant and water, the specific fuel consumption of micro-emulsion diesel was lower than those of diesel under any load at the speed of 2900r/min.

scholarly journals Effect of cetane improver addition into diesel fuel: Methanol mixtures on performance and emissions at different injection pressures

2017 ◽  
Vol 21 (1 Part B) ◽  
pp. 555-566 ◽  
Author(s):  
Feyyaz Candan ◽  
Murat Ciniviz ◽  
Ilker Ors
Keyword(s):  
Diesel Engine ◽  
Fuel Consumption ◽  
Diesel Fuel ◽  
Engine Performance ◽  
Injection Pressure ◽  
Specific Fuel Consumption ◽  
Exhaust Emission ◽  
Brake Specific Fuel Consumption ◽  
Consumption Values ◽  
Smoke Opacity

In this study, methanol in ratios of 5-10-15% were incorporated into diesel fuel with the aim of reducing harmful exhaust gasses of Diesel engine, di-tertbutyl peroxide as cetane improver in a ratio of 1% was added into mixture fuels in order to reduce negative effects of methanol on engine performance parameters, and isobutanol of a ratio of 1% was used as additive for preventing phase separation of all mixtures. As results of experiments conducted on a single cylinder and direct injection Diesel engine, methanol caused the increase of NOx emission while reducing CO, HC, CO2, and smoke opacity emissions. It also reduced torque and power values, and increased brake specific fuel consumption values. Cetane improver increased torque and power values slightly compared to methanol-mixed fuels, and reduced brake specific fuel consumption values. It also affected exhaust emission values positively, excluding smoke opacity. Increase of injector injection pressure affected performances of methanol-mixed fuels positively. It also increased injection pressure and NOx emissions, while reducing other exhaust emissions.

Fundamental Study of Diesel Engine Performance by Implementing Oil from Tropical Kepayang Seeds (Pangium edule)

2015 ◽  
Vol 1115 ◽  
pp. 480-483
Author(s):  
Khairil ◽  
Sulaiman Thalib ◽  
Dan Turmizi
Keyword(s):  
Power Generation ◽  
Diesel Engine ◽  
Fuel Consumption ◽  
Thermal Efficiency ◽  
Engine Speed ◽  
Engine Performance ◽  
The Other ◽  
Biodiesel Fuel ◽  
Fundamental Study ◽  
Tropical Regions

Kepayang is a plant commonly found in tropical regions especially in Aceh, which has not been optimally used by local people. Based on traditional processes, kepayang seeds are potentially capable of producing oil. The objective of this research is to examined the effects of specific fuel consumption, power generation, and the thermal efficiency on engine performance by using kepayang seeds oil. The problem will be evaluated the effect of variations of biodiesel fuel (B-0, B-10 and B-20) and variation engine rotation on the diesel engine performance. In order to perform this research, the Yanmar TS-50 engine which had rotation of 2400 rpm and maximum power of 2 kW was selected. By examining the result of the research it was concluded that there were not significant effects of varied fuel consumption on the low speed (1000 rpm to 1800 rpm) engine rotation. However for engine speed more than 1800 rpm there were somewhat effects of them on engine performance. It is evident that at the engine rotation of 2000 rpm, the fuel consumption of biodiesel (B-20) and the power generated were lower than compare to biodiesel (B-10 and B-0). On the other hand, the thermal efficiency for biodiesel (B-20) was higher than compared to other biodiesel (B-10 and B-0).

Universal Diesel Engine Simulator (UniDES) 2nd Report: Prediction of Engine Performance in Transient Driving Cycle Using One Dimensional Engine Model

2013 ◽  
Author(s):  
Yusuke Takasu ◽  
Satoshi Kaneko ◽  
Hiroyuki Tominaga ◽  
Yoshikazu Namura ◽  
Kazuhisa Inagaki ◽  
...  
Keyword(s):  
Diesel Engine ◽  
Engine Performance ◽  
Driving Cycle ◽  
One Dimensional ◽  
Engine Model

Analysis of Engine Performance Parameters of Electrically Assisted Turbocharged Diesel Engine

2015 ◽  
Vol 799-800 ◽  
pp. 861-864
Author(s):  
Tayfun Özgür ◽  
Kadir Aydın
Keyword(s):  
Diesel Engine ◽  
Fuel Consumption ◽  
Fuel Economy ◽  
Engine Performance ◽  
Performance Parameters ◽  
Turbocharged Diesel Engine ◽  
Charging System ◽  
Electrically Assisted ◽  
Turbocharging System ◽  
Exhaust Energy

Charging system is used to increase the charge density. Supercharging system suffers from fuel consumption penalty because of compressor powered by engine output. Turbocharging system uses wasted exhaust energy that means compressor powered by exhaust turbine but has a turbo lag problem. The electrically assisted turbocharger which can eliminate turbo lag problem and fuel consumption penalty is the topic of this paper. The purpose of this paper is to analyze the effect of electrically assisted turbocharger on diesel engine performance parameters. The AVL Boost software program was used to simulate the electrically assisted turbocharged diesel engine. Simulations results showed that electrically assisted turbocharger increases low end torque and improves fuel economy.

scholarly journals Study on Emission and Performance of Diesel Engine Using Castor Biodiesel

2014 ◽  
Vol 2014 ◽  
pp. 1-8 ◽  
Author(s):  
Md. Saiful Islam ◽  
Abu Saleh Ahmed ◽  
Aminul Islam ◽  
Sidek Abdul Aziz ◽  
Low Chyi Xian ◽  
...  
Keyword(s):  
Diesel Engine ◽  
Fuel Consumption ◽  
Performance Test ◽  
Engine Performance ◽  
Specific Fuel Consumption ◽  
Smoke Emission ◽  
Suitable Alternative ◽  
Biodiesel Blend ◽  
And Performance ◽  
Emission And Performance

This paper presents the result of investigations carried out in studying the emission and performance of diesel engine using the castor biodiesel and its blend with diesel from 0% to 40% by volume. The acid-based catalyzed transesterification system was used to produce castor biodiesel and the highest yield of 82.5% was obtained under the optimized condition. The FTIR spectrum of castor biodiesel indicates the presence of C=O and C–O functional groups, which is due to the ester compound in biodiesel. The smoke emission test revealed that B40 (biodiesel blend with 40% biodiesel and 60% diesel) had the least black smoke compared to the conventional diesel. Diesel engine performance test indicated that the specific fuel consumption of biodiesel blend was increased sufficiently when the blending ratio was optimized. Thus, the reduction in exhaust emissions and reduction in brake-specific fuel consumption made the blends of caster seed oil (B20) a suitable alternative fuel for diesel and could help in controlling air pollution.

Sign in / Sign up

Export Citation Format

Share Document