scholarly journals Human Face Tilt Is a Dynamic Social Signal That Affects Perceptions of Dimorphism, Attractiveness, and Dominance

2020 ◽  
Vol 18 (1) ◽  
pp. 147470492091040
Author(s):  
Peter Marshall ◽  
Amy Bartolacci ◽  
Darren Burke
Keyword(s):  
Eye Gaze ◽  
Linear Increase ◽  
Social Signals ◽  
Social Signal ◽  
Actual Movement ◽  
The Face ◽  
M 31 ◽  
The Given ◽  
Rating Category ◽  
Physical Dominance

Previous research has shown that manipulating the pitch of a face (tilting the face upward or downward) affects the perceived femininity, masculinity, attractiveness, and dominance of the given face. However, previous research has not considered the influence of direct eye gaze on dominance perceptions or the ambiguity surrounding the proposed social signals sent from a static face. The current research used 94 participants across two studies (women = 63%, age: M = 31). Stimuli varied in head pitch angle, eye gaze, and motion/static appearance. Participants rated the stimuli for levels of masculinity, femininity, attractiveness, and dominance. Both studies confirmed that pitching the face upward at incrementally increasing angles resulted in a linear increase in ratings of masculinity, physical dominance, and social dominance and a linear decrease in ratings of femininity, physical attractiveness, and behavioral allure. Study 2 showed that these effects can be dependent on either the perceived structural change of the face or the actual movement of the face, and these are different for each rating category. The perceived dimorphism, attractiveness, and dominance of a face will change dependent on the angle of pitch it is presented but also whether it is moving or not, where it is moving in space, and what direction it is moving.

Visual cells in the temporal cortex sensitive to face view and gaze direction

1985 ◽  
Vol 223 (1232) ◽  
pp. 293-317 ◽  
Keyword(s):  
Eye Gaze ◽  
Temporal Cortex ◽  
Macaque Monkey ◽  
Gaze Direction ◽  
Head Orientation ◽  
Social Signals ◽  
Response Latencies ◽  
Visual Cells ◽  
The Face ◽  
Full Face

The direction of eye gaze and orientation of the face towards or away from another are important social signals for man and for macaque monkey. We have studied the effects of these signals in a region of the macaque temporal cortex where cells have been found to be responsive to the sight of faces. Of cells selectively responsive to the sight of the face or head but not to other objects (182 cells) 63% were sensitive to the orientation of the head. Different views of the head (full face, profile, back or top of the head, face rotated by 45° up to the ceiling or down to the floor) maximally activated different classes of cell. All classes of cell, however, remained active as the preferred view was rotated isomorphically or was changed in size or distance. Isomorphic rotation by 90–180° increased cell response latencies by 10–60 ms. Sensitivity to gaze direction was found for 64% of the cells tested that were tuned to head orientation. Eighteen cells most responsive to the full face preferred eye contact, while 18 cells tuned to the profile face preferred averted gaze. Sensitivity to gaze was thus compatible with, but could be independent of, sensitivity to head orientation. Results suggest that the recognition of one type of object may proceed via the independent high level analysis of several restricted views of the object (viewer-centred descriptions).

Supporting the Use of Rudimentary Vocalizations

2014 ◽  
Vol 23 (3) ◽  
pp. 132-139 ◽  
Author(s):  
Lauren Zubow ◽  
Richard Hurtig
Keyword(s):  
Rett Syndrome ◽  
Visual Cues ◽  
Acoustic Analysis ◽  
Eye Gaze ◽  
Research Question ◽  
Primary Research ◽  
Multiple Modalities ◽  
Face To Face ◽  
Perceptual Judgments ◽  
The Face

Children with Rett Syndrome (RS) are reported to use multiple modalities to communicate although their intentionality is often questioned (Bartolotta, Zipp, Simpkins, & Glazewski, 2011; Hetzroni & Rubin, 2006; Sigafoos et al., 2000; Sigafoos, Woodyatt, Tuckeer, Roberts-Pennell, & Pittendreigh, 2000). This paper will present results of a study analyzing the unconventional vocalizations of a child with RS. The primary research question addresses the ability of familiar and unfamiliar listeners to interpret unconventional vocalizations as “yes” or “no” responses. This paper will also address the acoustic analysis and perceptual judgments of these vocalizations. Pre-recorded isolated vocalizations of “yes” and “no” were presented to 5 listeners (mother, father, 1 unfamiliar, and 2 familiar clinicians) and the listeners were asked to rate the vocalizations as either “yes” or “no.” The ratings were compared to the original identification made by the child's mother during the face-to-face interaction from which the samples were drawn. Findings of this study suggest, in this case, the child's vocalizations were intentional and could be interpreted by familiar and unfamiliar listeners as either “yes” or “no” without contextual or visual cues. The results suggest that communication partners should be trained to attend to eye-gaze and vocalizations to ensure the child's intended choice is accurately understood.

Manufacturability Analysis for Solid Freeform Fabrication

1999 ◽  
Author(s):  
R. K. Arni ◽  
S. K. Gupta
Keyword(s):  
Systematic Approach ◽  
Solid Freeform Fabrication ◽  
Second Step ◽  
Freeform Fabrication ◽  
Design Tolerance ◽  
The Face ◽  
The Right ◽  
The Given ◽  
Manufacturing Problems ◽  
Case Effect

Abstract This paper describes a systematic approach to analyzing manufacturability of parts produced using Solid Freeform Fabrication (SFF) processes with flatness, parallelism and perpendicularity tolerance requirements on the planar faces of the part. SFF processes approximate objects using layers, therefore the part being produced exhibits stair-case effect. The extent of this stair-case effect depends on the angle between the build orientation and the face normal. Therefore, different faces whose direction normal is oriented differently with respect to the build direction may exhibit different values of inaccuracies. We use a two step approach to perform the manufacturability analysis. We first analyze each specified tolerance on the part and identify the set of feasible build directions that can be used to satisfy that tolerance. As a second step, we take the intersection of all sets of feasible build directions to identify the set of build directions that can simultaneously satisfy all specified tolerance requirements. If there is at least one build direction that can satisfy all tolerance requirements, then the part is considered manufacturable. Otherwise, the part is considered non-manufacturable. Our research will help SFF designers and process providers in the following ways. By evaluating design tolerances against a given process capability, it will help designers in eliminating manufacturing problems and selecting the right SFF process for the given design. It will help process providers in selecting a build direction that can meet all design tolerance requirements.

An accidental visualization of the Brillouin zone in an Ni–W alloyviadiffuse scattering

2013 ◽  
Vol 46 (4) ◽  
pp. 1211-1215 ◽  
Author(s):  
Sascha B. Maisel ◽  
Nils Schindzielorz ◽  
Stefan Müller ◽  
Harald Reichert ◽  
Alexei Bosak
Keyword(s):  
Fermi Surface ◽  
Brillouin Zone ◽  
Expansion Method ◽  
Reciprocal Space ◽  
Three Dimensions ◽  
X Rays ◽  
Solid State Physics ◽  
Seitz Cell ◽  
The Face ◽  
The Given

Solid state physics is built on the concept of reciprocal space. The physics of any given periodic crystal is fully defined within the Wigner–Seitz cell in reciprocal space, also known as the first Brillouin zone. It is a purely symmetry-based concept and usually does not have any eye-catching signature in the experimental data, in contrast with some other geometrical constructions like the Fermi surface. However, the particular shape of the Fermi surface of nickel allowed the visualization of the system of edges (skeleton) of the Wigner–Seitz cell of the face-centred cubic lattice in reciprocal space in three dimensions by the diffuse scattering of X-rays from Ni1−xWx(x= 0.03, 0.05, 0.08) single crystals. Employing a cluster-expansion method with first-principles input, it is possible to show that the observed scattering is inherent to the given nickel alloys and the crystal structures they form. This peculiar feature can be understood by considering the shape of the Fermi surface of pure nickel.

scholarly journals Eye Gaze Controlled Communication

2021 ◽  
Vol 9 (VI) ◽  
pp. 3616-3620
Author(s):  
Marishetti Niharika
Keyword(s):  
Nonverbal Communication ◽  
Eye Gaze ◽  
Emerging Technology ◽  
Digital Interface ◽  
Virtual Keyboard ◽  
Eye Blink ◽  
Nonverbal Interaction ◽  
Impaired People ◽  
The Face ◽  
The Individual

Eye gazing is the fundamental nonverbal interaction that is presently strengthening in emerging technology. This eye blink device facilitates communication among people with disabilities. The process is so simple that it can be done with the eyes blinking on the specific keys built into the virtual keyboard. This type of system may synthesize speech, regulate his environment, and provide a significant boost in self-belief in the individual. Our study emphasises the virtual keyboard, which not only includes integrated alphabetic keys but also contains emergency phrases that may seek help in a variety of scenarios. It can, however, provide voice notification and speech assistance to those who are speech-impaired. To get this, we employed our PC/computer digital Digi-Cam, which is integrated and recognises the face and its elements. As a result, the technique for detecting the face is far less complicated than everything else. The blink of an eye provides an opportunity for a mouse to click on the digital interface. Our goal is to provide nonverbal communication, and as a result, physically impaired people should be able to communicate with the use of a voice assistant. This type of innovation is a blessing for those who have lost their voice or are suffering from paralytic ailments.

scholarly journals Whole-agent selectivity within the macaque face-processing system

2015 ◽  
Vol 112 (47) ◽  
pp. 14717-14722 ◽  
Author(s):  
Clark Fisher ◽  
Winrich A. Freiwald
Keyword(s):  
Processing System ◽  
The Body ◽  
Social Signals ◽  
Social Agent ◽  
Natural Motion ◽  
Facial Shape ◽  
Single Face ◽  
The Face ◽  
Visual Degradation ◽  
The Rich

The primate brain contains a set of face-selective areas, which are thought to extract the rich social information that faces provide, such as emotional state and personal identity. The nature of this information raises a fundamental question about these face-selective areas: Do they respond to a face purely because of its visual attributes, or because the face embodies a larger social agent? Here, we used functional magnetic resonance imaging to determine whether the macaque face patch system exhibits a whole-agent response above and beyond its responses to individually presented faces and bodies. We found a systematic development of whole-agent preference through the face patches, from subadditive integration of face and body responses in posterior face patches to superadditive integration in anterior face patches. Superadditivity was not observed for faces atop nonbody objects, implying categorical specificity of face–body interaction. Furthermore, superadditivity was robust to visual degradation of facial detail, suggesting whole-agent selectivity does not require prior face recognition. In contrast, even the body patches immediately adjacent to anterior face areas did not exhibit superadditivity. This asymmetry between face- and body-processing systems may explain why observers attribute bodies’ social signals to faces, and not vice versa. The development of whole-agent selectivity from posterior to anterior face patches, in concert with the recently described development of natural motion selectivity from ventral to dorsal face patches, identifies a single face patch, AF (anterior fundus), as a likely link between the analysis of facial shape and semantic inferences about other agents.

A Context-Aware Model of Trust for Facilitating Secure Ad Hoc Collaborations

2010 ◽  
pp. 250-281 ◽  
Author(s):  
Indrajit Ray ◽  
Indrakshi Ray ◽  
Sudip Chakraborty
Keyword(s):  
Incomplete Information ◽  
Ad Hoc ◽  
Sensitive Information ◽  
Trust Value ◽  
Trust Relationships ◽  
The Face ◽  
Trust Models ◽  
Almost All ◽  
Ad Hoc Collaborations ◽  
The Given

Ad hoc collaborations often necessitate impromptu sharing of sensitive information or resources between member organizations. Each member of resulting collaboration needs to carefully assess and tradeoff the requirements of protecting its own sensitive information against the requirements of sharing some or all of them. The challenge is that no policies have been previously arrived at for such secure sharing (since the collaboration has been formed in an ad hoc manner). Thus, it needs to be done based on an evaluation of the trustworthiness of the recipient of the information or resources. In this chapter, the authors discuss some previously proposed trust models to determine if they can be effectively used to compute trustworthiness for such sharing purposes in ad hoc collaborations. Unfortunately, none of these models appear to be completely satisfactory. Almost all of them fail to satisfy one or more of the following requirements: (i) well defined techniques and procedures to evaluate and/or measure trust relationships, (ii) techniques to compare and compose trust values which are needed in the formation of collaborations, and (iii) techniques to evaluate trust in the face of incomplete information. This prompts the authors to propose a new vector (we use the term “vector” loosely; vector in this work means a tuple) model of trust that is suitable for reasoning about the trustworthiness of systems built from the integration of multiple subsystems, such as ad hoc collaborations. They identify three parameters on which trust depends and formulate how to evaluate trust relationships. The trust relationship between a truster and a trustee is associated with a context and depends on the experience, knowledge, and recommendation that the truster has with respect to the trustee in the given context. The authors show how their model can measure trust in a given context. Sometimes enough information is not available about a given context to calculate the trust value. Towards this end the authors show how the relationships between different contexts can be captured using a context graph. Formalizing the relationships between contexts allows us to extrapolate values from related contexts to approximate a trust value of an entity even when all the information needed to calculate the trust value is not available. Finally, the authors develop formalisms to compare two trust relationships and to compose two or more of the same – features that are invaluable in ad hoc collaborations.

Constructing tetrahedra with given face areas

2020 ◽  
Vol 104 (559) ◽  
pp. 63-73
Author(s):  
Michael Fox
Keyword(s):  
The Face ◽  
The Given ◽  
Unusual Problem

We tackle an unusual problem that, as far as I know, is not in the standard literature. To state it concisely I use what I call ‘valid sets’. We know that in any three or more positive quantities, only the largest can be half or more of the total value; and is then obviously greater than the sum of all the others. But if the largest is less than half the total of the set, it must be less than the sum of the others; and this is true for every element in this set. I call such a set ‘valid’. For example, the sides of a triangle are valid, as are the face areas of a tetrahedron. Our problem relates to the converse for a tetrahedron: given any four valid quantities, is there always a tetrahedron with those face areas? In this article I answer this by showing that, for any valid set, we can always construct the net of a corresponding tetrahedron. In fact, for any given valid set there is always an infinity of non-congruent tetrahedra with the given face areas. Although in general there are no formulae that give the exact edge lengths of these solids, I show that there are always several distinct infinite subsets that are constructible and whose edge lengths can be determined exactly.

scholarly journals Effects of being watched on eye gaze and facial displays of typical and autistic individuals during conversation

Autism ◽  
2020 ◽  
pp. 136236132095169 ◽  
Author(s):  
Roser Cañigueral ◽  
Jamie A Ward ◽  
Antonia F de C Hamilton
Keyword(s):  
Facial Expressions ◽  
Eye Gaze ◽  
Video Camera ◽  
Social Contexts ◽  
Social Signals ◽  
Camera System ◽  
High Functioning ◽  
Face To Face ◽  
Facial Displays ◽  
Video Camera System

Communication with others relies on coordinated exchanges of social signals, such as eye gaze and facial displays. However, this can only happen when partners are able to see each other. Although previous studies report that autistic individuals have difficulties in planning eye gaze and making facial displays during conversation, evidence from real-life dyadic tasks is scarce and mixed. Across two studies, here we investigate how eye gaze and facial displays of typical and high-functioning autistic individuals are modulated by the belief in being seen and potential to show true gaze direction. Participants were recorded with an eye-tracking and video-camera system while they completed a structured Q&A task with a confederate under three social contexts: pre-recorded video, video-call and face-to-face. Typical participants gazed less to the confederate and produced more facial displays when they were being watched and when they were speaking. Contrary to our hypotheses, eye gaze and facial motion patterns in autistic participants were overall similar to the typical group. This suggests that high-functioning autistic participants are able to use eye gaze and facial displays as social signals. Future studies will need to investigate to what extent this reflects spontaneous behaviour or the use of compensation strategies. Lay abstract When we are communicating with other people, we exchange a variety of social signals through eye gaze and facial expressions. However, coordinated exchanges of these social signals can only happen when people involved in the interaction are able to see each other. Although previous studies report that autistic individuals have difficulties in using eye gaze and facial expressions during social interactions, evidence from tasks that involve real face-to-face conversations is scarce and mixed. Here, we investigate how eye gaze and facial expressions of typical and high-functioning autistic individuals are modulated by the belief in being seen by another person, and by being in a face-to-face interaction. Participants were recorded with an eye-tracking and video-camera system while they completed a structured Q&A task with a confederate under three social contexts: pre-recorded video (no belief in being seen, no face-to-face), video-call (belief in being seen, no face-to-face) and face-to-face (belief in being seen and face-to-face). Typical participants gazed less to the confederate and made more facial expressions when they were being watched and when they were speaking. Contrary to our hypotheses, eye gaze and facial expression patterns in autistic participants were overall similar to the typical group. This suggests that high-functioning autistic participants are able to use eye gaze and facial expressions as social signals. Future studies will need to investigate to what extent this reflects spontaneous behaviour or the use of compensation strategies.

scholarly journals Exact Formula for Computing the Hyper-Wiener Index on Rows of Unit Cells of the Face-Centred Cubic Lattice

2018 ◽  
Vol 26 (1) ◽  
pp. 169-187 ◽  
Author(s):  
Hamzeh Mujahed ◽  
Benedek Nagy
Keyword(s):  
Wiener Index ◽  
Exact Formula ◽  
Mathematical Induction ◽  
Binomial Coefficients ◽  
Integer Sequences ◽  
Cubic Lattice ◽  
Unit Cells ◽  
The Face ◽  
The Given ◽  
Sum Of Distances

Abstract Similarly to Wiener index, hyper-Wiener index of a connected graph is a widely applied topological index measuring the compactness of the structure described by the given graph. Hyper-Wiener index is the sum of the distances plus the squares of distances between all unordered pairs of vertices of a graph. These indices are used for predicting physicochemical properties of organic compounds. In this paper, the graphs of lines of unit cells of the face-centred cubic lattice are investigated. The graphs of face-centred cubic lattice contain cube points and face centres. Using mathematical induction, closed formulae are obtained to calculate the sum of distances between pairs of cube points, between face centres and between cube points and face centres. The sum of these formulae gives the hyper-Wiener index of graphs representing face-centred cubic grid with unit cells connected in a row. In connection to integer sequences, a recurrence relation is presented based on binomial coefficients.

Sign in / Sign up

Export Citation Format

Share Document